Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INORGANIC COMPOUND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Experimental and Theoretical Study of Oxolan-3-one Thermal Decomposition

The thermal decomposition of oxolan-3-one, a common component of the bio-oil formed during biomass pyrolysis, has been studied using ab initio calculations and experiments employing pulsed gas-phase pyrolysis with matrix isolation FTIR product detection. Four pathways for unimolecular decomposition were predicted using computational methods. The dominant reaction channel led to carbon monoxide, formaldehyde, and ethylene, all of which were observed experimentally. Here, the other channels led to an assortment of products including ketene, water, propyne, and acetylene, which were all confirmed in the matrix-isolation FTIR spectra. There is also evidence for the production of substituted ketenes in pyrolysis, most likely hydroxyketene and methylketene.

09 BIOMASS FUELS↗
DOE OSTI2022

Thermodynamics of the Metal Carbonates and Bicarbonates of Mn, Co, Ni, Cu, and Zn Relevant to Mineral Energetics

The gas phase heats of formation of ground-state MCO 3 , M(HCO 3 ) 2 , and M(HCO 3 )(OH), where M = Mn, Co, Ni, Cu, and Zn, have been predicted using the correlated molecular orbital theory at the CCSD(T) level extrapolated to the complete basis set limit using the Feller–Peterson–Dixon (FPD) approach. Cohesive energies of the carbonates were predicted based on the calculated gas phase and experimental solid heats of formation. Coulombic dissociation energies (CDEs) between metal cations and anions show a near-linear correlation with Shannon metal cation atomic radii, yet no correlation is found with the hardness of these cations. The total reaction dissociation energies (TRDEs) of transition metals are higher than their CDEs for the di-bicarbonates, in contrast to those for Mg and Ca based on our prior work. In addition to differences in the energies needed to prepare the transition metal dications, electron donation from the ligands to the 3d orbitals of open-shell transition metal dications from lone pairs of adjacent O atoms also plays a role. No electron donation from the ligands to the fully occupied 3d orbitals of Zn and Cd was found. Decomposition energies for generating MO, CO 2 , and/or H 2 O were calculated. Gas phase metal exchange energies only partially correlate with the electrochemical series for M(s) → M 2+( aq). The FPD heats of formation were used to benchmark a range of density functional theory exchange–correlation functionals, including those commonly used in solid-state mineral calculations. None of the functionals provided chemical accuracy agreement (±1 kcal/mol) with the FPD results. So, the best agreement with the FPD results is predicted for the $\tau$-HCTH functional with an average unsigned error of 8.3 kcal/mol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Collisional Excitation of HCN by CO to Refine the Modeling of Cometary Comae

Here, we present the first dataset of collisional (de)-excitation rate coefficients of HCN induced by CO, one of the main perturbing gases in cometary atmospheres. The dataset spans the temperature range of 5–50 K. It includes both state-to-state rate coefficients involving the lowest ten and nine rotational levels of HCN and CO, respectively, and the so-called “thermalized” rate coefficients over the rotational population of CO at each kinetic temperature. The derivation of these coefficients exploited the good performance of the statistical adiabatic channel model (SACM) on top of an accurate interaction potential computed at the CCSD(T)-F12b/CBS level of theory. The reliability of the SACM approach was validated by comparison with full quantum calculations restricted at the lowest total angular momentum of the system. These results provide essential input to accurately model the distribution among the rotational energy levels and the abundance of HCN in cometary atmospheres, accounting for deviations from local thermodynamic equilibrium that typically occurs in such environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Photodissociation and Infrared Spectroscopy of U + (CO 2 ) n , UO + (CO 2 ) n , and UO 2+ (CO 2 ) n Cation-Molecular Complexes

Laser vaporization of uranium in a pulsed supersonic expansion of carbon dioxide is used to produce complexes of the form U + (CO 2 ) n , UO + (CO 2 ) n , and UO 2+ (CO 2 ) n . These ions are selected in a reflectron time-offlight mass spectrometer and studied with visible laser photodissociation and tunable infrared laser photodissociation spectroscopy in the region of the CO 2 antisymmetric stretch. The dissociation patterns and spectroscopy of these ions indicate that CO 2 ligands are intact molecules. Although reaction products that form oxide-carbonyl or oxalate species are predicted to be stable, there is no direct evidence in the frequency range studied for the formation of these species. There is no clear indication for the coordination numbers for singly charged uranium and its oxide complexes with CO 2 . However, there is strong support in the vibrational patterns for an eight-coordinate complex of the doubly charged UO 2+ species, i.e., UO 2+ (CO 2 ) 8 .

Cluster chemistry↗
DOE OSTI2023

Characterizing the Mechanisms of Ca and Mg Carbonate Ion-Pair Formation with Multi-Level Molecular Dynamics/Quantum Mechanics Simulations

The carbonate minerals of Ca and Mg are abundant throughout the lithosphere and have recently garnered significant research interest as possible long-term carbon sinks in the sequestration of atmospheric carbon dioxide. Nonetheless, an understanding of the atomic-level processes comprising their mineralization remains limited. Furthermore, we characterize and contrast the mechanisms of contact ion-pair formation in aqueous Ca and Mg carbonate systems, which represents the most fundamental step leading to the formation of their mineral solids. Utilizing multilevel embedded correlated wavefunction-based ab initio molecular dynamics/quantum mechanics simulations, we characterize not only the dynamics of these processes but also factors arising from the electronic structure of the involved species, revealing further details of the fundamentally different mechanisms for the interconversion between the contact ion-pairs and solvent-shared ion-pairs of Ca versus Mg carbonate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Ionic Liquid-Enhanced Interfaces to Boost Reactive C O2 Capture

The addition of ionic liquids (ILs) to a mixture containing a molecular solvent and other ionic species can induce the heterogeneous redistribution of cations and anions at the gas–liquid interface. This nonuniform redistribution of cations and anions driven by the differences in the solvophilicity of ions can improve the thermophysical and interfacial properties of such mixtures, creating a local chemical environment that is conducive to some reactions. In this work, ILs are added to a mixture of potassium hydroxide (KOH) and ethylene glycol (EG), used as a reactive absorbent and electrolyte in the migration-assisted moisture-gradient (MAMG) process for CO 2 capture. Molecular dynamics (MD) simulations are employed to probe into the effects of complex ion–ion and ion–solvent interactions and to examine the chemical composition at the gas–liquid interface. A total of 12 systems are investigated using molecular simulations to identify trends in the performance of IL additives based on the choice of cation, anion, and IL concentration. The cation effects are studied using IL additives based on 1-ethyl-3-methylimidazolium ([EMIM] + ) and 1-butyl-3-methylimidazolium ([BMIM] + ), while the impact of anions is examined using additives based on dicyanamide [DCA] − , triflate [TfO] − , bistriflimide [NTf 2 ] − , and hexafluorophosphate [PF 6 ] − anions, respectively. The influence of the IL concentration is also evaluated at molar concentrations between 1% and 4%. The simulation results indicate that the use of IL additives can affect the physical CO 2 solubility, surface tension, and the localization of CO 2 around the [OH] − ions at the gas–liquid interface. It is also evident that the choice of cations, anions, and IL concentration determines the extent to which the IL additives impact the local physicochemical properties. Physical dissolution, diffusive transport, and interaction with [OH] − are critical intermediate steps toward reactive CO 2 capture using a liquid absorbent. Hence, the improvement in one or more of these properties, aided by IL additives, is expected to improve the overall CO 2 capture performance. Experiments reaffirmed the impact of IL additives on CO 2 capture performance and the sensitivity to the choice of the cation, anion, and concentration of the IL additive.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Exploring Trends on Coupling Mechanisms toward C 3 Product Formation in CO (2) R

Challenges in improving catalysts for electrochemical CO 2 reduction require a clear understanding of the reaction mechanisms that lead to products of higher value. Here, we use density functional theory (DFT) to determine the most competitive coupling mechanisms leading to C 3 products on Cu(100) and Cu(511). We exhaustively consider surface coupling pathways between CO* and different C 2 intermediates. On Cu(100), CO* coupling with acetaldehyde was identified as a notable step for C 3 product formation. On Cu(511), local field stabilizations enable an additional coupling step between HCCH* and CO*. This suggests that there is more than one possible pathway toward forming C 3 intermediates. Our simulations show that much like C 2 formation, C 3 formation prefers stepped surfaces with (100)-like sites and that local field stabilization can play a pivotal role in certain coupling steps.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Structure of the Bastnäsite (001) Surface by Crystal Truncation Rod X-ray Diffraction and Ab Initio Molecular Dynamics: Implications for Separations of a Rare Earth Ore Mineral

Bastnäsite ((Ce,La)FCO 3 ) is the primary mineral source of light rare earth elements, but its surface structure is not well understood. This presents a major challenge in improving beneficiation strategies. In this work, a synergistic combination of X-ray scattering and ab initio molecular dynamics (AIMD) was used to gain atomistic insight into the interfacial structure of bastnäsite. Surface X-ray scattering was used to measure crystal truncation rods (CTRs) of the bastnäsite (001) surface, a significant crystal face with a previously unknown termination. The best-fit atomic-scale model of the CTR data features a carbonate layer at the surface, which is stabilized by the relaxation of carbonate groups from their bulk structural positions. AIMD simulations predict similar surface relaxations, which are shown to be influenced by the protonation of oxygen atoms at the surface. Evidence of ordered water at the interface is also observed in the best-fit model and AIMD simulations. Further, the presence of a carbonate layer at this dominant crystal surface is significant for improving separation technologies because most commonly used ligands utilize anionic functional groups to chelate metal cations at particle surfaces. Without modification, anionic ligands are expected to have poor affinity for the carbonate-terminated (001) surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Additive Molar Volumes in Amorphous Ca/Sr Carbonate Solid Solutions

The development of predictive models of minor element incorporation in crystalline carbonate end products requires an understanding of the fundamental controls on metastable intermediate phase composition. In this study, we used small-angle X-ray scattering (SAXS), X-ray pair distribution function (PDF), thermogravimetric analysis (TGA), inductively coupled plasma mass spectrometry (ICP-MS), and transmission electron microscopy (TEM) to determine the composition-dependent density of an amorphous calcium–strontium carbonate (ACSC) solid solution. The amorphous calcium carbonate (ACC) and strontium carbonate (ASC) measured densities were ρ ACC = 2.19 ± 0.04 g/cm 3 and ρ ASC = 2.97 ± 0.05 g/cm 3 . Throughout our work, the experiments showed a dependence of the water content of the amorphous solid solution on the Sr mole fraction. An equation that relates the molar volume to the average cation radius, the carbonate ion radius, and the water volume was parameterized for hydrated crystalline carbonates and predicted well the molar volume of the ACSC solid solution. This finding indicates that, as for hydrated crystalline carbonates, the molar volumes of amorphous carbonates are additive and that water is a structural component of ACSC. Ab initio molecular dynamics (AIMD) simulations of the ACSC solid solutions showed strong linear correlations between calculated molar volumes and Sr and H 2 O contents, thus supporting the experimental results. In conclusion, our findings highlight the need to consider the full CaCO 3 –MeCO 3 –H 2 O ternary when quantifying metal cation incorporation in ACC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

AP-XPS Study of the Reaction of O 2 and CO 2 with Zn–Au(111) Surface Alloys: Activation of O–O/C–O Bonds and the Formation of ZnO

Synchrotron-based ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) was used to study the dissociation of O 2 and CO 2 on Zn-Au(111) alloys which contained 0.2-0.3 monolayers of zinc. Although Au(111) is inert, the alloys displayed a high activity for the cleavages of O-O and C-O bonds at room temperature with the formation of ZnO x species. Dissociative adsorption of O 2 at 300 K destroyed the alloys and the results of AP-XPS pointed to the co-existence of two types of oxygen species on the surface: ZnO x and chemisorbed O atoms (O chem ) on Au or the Au-ZnO interface. Annealing from room temperature to 600 K induced a O chem → ZnO x transformation that reflected the poor stability of O atoms on Au(111). The Zn-Au(111) systems exhibited a reactivity towards CO 2 that was much larger than that seen for Au(111), Cu(111) or surfaces of late transition metals like, Ni, Pd or Pt. At 300 K, CO 2 underwent partial dissociation depositing large amounts of O chem on the surface with minor formation of ZnO x . In addition, the deposited O chem reacted with CO 2 to form surface carbonate groups. Dosing of CO 2 at 500-600 K mainly led to the formation of ZnO x and the surface carbonate almost disappeared. In the presence of hydrogen, i.e. reaction feeds with a CO 2 to H 2 ratio of 1:3, the surface chemistry at 300 K was very similar to that seen for pure CO 2 with the formation of ZnO x and carbonate groups. In contrast, at 500-600 K, reaction with hydrogen induced the removal of ZnO x and CO 3 /HCOO species. Finally, our AP-XPS results are consistent with the idea that CO 2 hydrogenation on AuZn alloys involves a redox process where there is sequential oxidation by CO 2 and reduction by H 2 to yield methanol.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Vibrational study of CO, O 2 , and H 2 Adsorbed on the CoCrFeNi (110) High Entropy Alloy Surface

The vibrational properties of CO, O 2 , and H 2 molecularly or dissociatively adsorbed on a CoCrFeNi(110) surface have been probed using highresolution energy loss spectroscopy (HREELS) and modeled using density functional theory (DFT) calculations. Large (~20 mm3) single-crystal, quaternary face-centered cubic CoCrFeNi was synthesized via a modified Czochralski technique. We show strong evidence that CO adsorbs primarily on bridge and on-top sites in compositionally varied local environments, which reflect the random, multielemental surface composition inherent in a high entropy alloy. A variation of adsorption sites is also found with oxygen, which exhibits two broad groups of modes. Comparison to previous photoemission and theoretical studies suggests that the higher energy modes consist primarily of local CrO x species, while the lower energy modes are due to oxygen atoms adsorbed on other metal sites. Unlike CO and O 2 , HREELS upon H 2 adsorption shows only two much narrower modes and is consistent with atomic adsorption on 3-fold hollow sites. The hypothesized adsorption sites for all three species are directly corroborated by our DFT calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Using Active Learning to Rapidly Develop Machine Learned Diffusion Coefficients of CO 2 Conversion Reagents in Metal–Organic Frameworks

Here, we used a combined molecular dynamics/active learning (AL) approach to create machine learning models that can predict the diffusion coefficient of epichlorohydrin and chloropropene carbonate, the reactant and product of a common CO 2 cycloaddition reaction, in metal–organic frameworks (MOFs). Nanoporous MOFs are effective catalysts for the cycloaddition of CO 2 to epoxides. The diffusion rates within nanoporous catalysts can control the rate of reaction as the reactants and products must diffuse to the active sites within the MOF and then out of the nanoporous material for reusability. However, the diffusion process is routinely ignored when searching for new materials in catalytic applications. Here we verified improvement during the AL process by consistently tracking metrics on the same groups of MOFs to ensure consistency. Metal identity was found to have little impact on diffusion rates, while structural features like pore limiting diameter act as a threshold where a minimum value is needed for high diffusion rates. We identified the MOFs with the highest epichlorohydrin and chloropropene carbonate diffusion coefficients which can be used for further studies of reaction energetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Carbonation and Sulfidation of Mg- and Ni-Containing Solutions: Implications for Carbon Mineralization and Critical Element Recovery

Carbonation of alkaline earth metals ( e.g. , magnesium (Mg)) and sulfidation of nickel (Ni) are promising methods to achieve concurrent carbon mineralization and selective Ni recovery. However, the coexistence of alkaline earth metals and Ni from silicate ores or mining wastewater complicates the carbonation and sulfidation owing to cation coprecipitation. To better understand simultaneous metal carbonation and Ni-sulfide formation, we used Mg- and Ni-containing solutions and systematically investigated the Mg and Ni coprecipitates’ phase transformation during sequential/concurrent carbonation and sulfidation. During a single carbonation process, hydromagnesite dehydrated and formed magnesite over time. Nickel bicarbonate formed and became a Mg–Ni carbonate solid solution because of their similar ionic radii. During a single sulfidation process, the pH did not affect Ni-sulfide formation, but it controlled Mg behavior. Specifically, at pH 9.6, brucite formed, while at pH 7.8, Mg 2+ remained in the solution. For the sequential carbonation–sulfidation process, Ni-carbonate formed during carbonation converted to Ni-sulfide because of the low Ni-sulfide K sp . For the sulfidation–carbonation process, Ni-sulfide remained the same even after carbonation and Mg-carbonate precipitates. For the concurrent carbonation and sulfidation process, Mg-carbonate and Ni-sulfide formed simultaneously. Finally, this study develops a scientific foundation of carbonation and sulfidation processes, benefiting coupled CO 2 storage and sulfide-enabled resource recovery.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Quantitative Imaging of Cobalt Phthalocyanine Distribution on Carbon Nanotubes: A Deep Learning Approach to Catalyst Characterization

Electrochemical reduction of carbon dioxide (CO 2 ) offers a pathway to valuable products, with catalysts playing a crucial role. This study investigates the distribution of cobalt tetraaminophthalocyanine (CoPc-NH 2 ) immobilized on carbon nanotubes (CNTs), utilizing high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) to characterize CoPc-NH 2 distribution. A challenge in the quantitative HAADF-STEM analysis is the introduction of bias from manual Co atom identification. To address this, we developed and trained a convolutional neural network (CNN) using a data set generated from images of CoPc-NH 2 /CNT samples with varying Co loadings. The CNN, implemented in TensorFlow and Keras, facilitated Co atom detections. Analysis of the CNN-generated data confirmed a correlation between Co loading and surface density, consistent with findings from UV–vis spectroscopy. Furthermore, the application of Ripley’s L(d) function highlighted the presence of slight Co atom clustering. Furthermore, this work demonstrates the utility of the combined HAADF-STEM and CNN approach for providing spatially resolved information about catalyst distribution on nonplanar supports, revealing structural details that are typically lost through other characterization methods.

HAADF-STEM↗
DOE OSTI2025

In Situ Studies of Copper-Zirconia-Zinc Oxide Model Catalysts for CO 2 Hydrogenation

A combination of in situ X-ray photoelectron spectroscopy (XPS) and infrared reflection absorption spectroscopy (IRAS) was used to investigate the formation of surface intermediates from CO 2 hydrogenation on copper-zirconia-zinc oxide model catalysts under reaction conditions. Copper clusters with different numbers of atoms (n = 1, 4, 13) were deposited onto bare and ZrO 2 -modified ZnO powder supports to systematically examine the effects of Cu cluster size and the synergy between metal and metal-oxide components. Under low pressure CO 2 hydrogenation conditions (CO 2 :H 2 = 1:9, 0.4 mbar, 300–600 K), XPS and IRAS identify the most prominent intermediates as carbonate (CO 3 *), formate (HCOO*) and methoxy (CH 3 O*), which is the final surface-bound intermediate leading to methanol. The temperature profiles are consistent with a mechanism in which CO 2 is adsorbed as carbonate species (HCO 3 *, CO 3 *) followed by hydrogenation reactions to formate (HCOO*) and methoxy (CH 3 O*), but the relative yields strongly depend on surface composition. Specifically, the presence of ZrO 2 promotes CO 2 adsorption and activation and improves the thermal stability of the Cu clusters against loss of surface area. Moreover, the ternary Cu 4 /ZrO 2 /ZnO surface is significantly more active than Cu 4 /ZnO and ZrO 2 /ZnO surfaces for the formation of methoxy (CH 3 O*), indicating that Cu–ZrO 2 interfaces promote the formation of key intermediates leading to methanol. Finally, the yields of intermediates are similar for all Cu cluster sizes (Cu 1 , Cu 4 and Cu 13 ), indicating that the primary role of Cu is to provide H atoms via H 2 dissociation and spillover. In conclusion, these molecular-level insights provide a fundamental understanding of the enhanced efficiency of ternary Cu–ZrO 2 –ZnO catalysts and establish design principles for developing improved catalysts for CO 2 conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Synthesis and Evaluation of Cu@ZnO Core@Shell Nanowires for Use in the Carbon Dioxide Thermal Reduction Reaction

Copper-based core@shell nanomaterials are of interest for the catalytic hydrogenation of carbon dioxide toward value-added products. In this context, we have developed a facile, microwave-based procedure for the reliable and reproducible synthesis of Cu@ZnO core@shell nanowires. A systematic assessment of the effect of rationally varying various reaction conditions on this protocol was completed in order to better evaluate the growth process of these core–shell motifs. We determined that among different reaction parameters, it was the critical role of reaction time which enabled the quantitatively reliable growth of external shells with tunable thicknesses of up to 20 nm. As a demonstration of the material’s practical viability, catalytic testing was subsequently performed for the reverse water–gas shift reaction (CO 2 + H 2 → CO + H 2 O), with the evolution of the process followed with in situ X-ray diffraction and X-ray absorption spectroscopy in order to probe structural changes and gauge stability. These tests found the catalysts to be effective at converting CO 2 to CO, with notable stability detected in the shell layer and no observed alloying between copper and zinc. Furthermore, our studies support the idea that the Cu–ZnO and CuO x –ZnO interfaces are essential for the effective activation of CO 2 and H 2 .

36 MATERIALS SCIENCE↗