Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Crossover of electron-electron interaction effect in Sn-doped indium oxide films

We systematically study the structures and electrical transport properties of a series of Sn-doped indium oxide (ITO) films with thickness t ranging from ∼5 to ∼53 nm. Scanning electron microscopy and x-ray diffraction results indicate that the t ≲ 16.8 nm films are polycrystalline, while those t ≳ 26.7 nm films are epitaxially grown along [100] direction. For the epitaxial films, the Altshuler and Aronov electron-electron interaction (EEI) effect governs the temperature behaviors of the sheet conductance σ{sub □} at low temperatures, and the ratios of relative change of Hall coefficient ΔR{sub H}/R{sub H} to relative change of sheet resistance ΔR{sub □}/R{sub □} are ≈2, which is quantitatively consistent with Altshuler and Aronov EEI theory and seldom observed in other systems. For those polycrystalline films, both the sheet conductance and Hall coefficient vary linearly with logarithm of temperature below several tens Kelvin, which can be well described by the current EEI theories in granular metals. We extract the intergranular tunneling conductance of each film by comparing the σ{sub □}(T) data with the predication of EEI theories in granular metals. It is found that when the tunneling conductance is less than the conductance of a single indium tin oxide (ITO) grain, the ITO film reveals granular metal characteristics in transport properties; conversely, the film shows transport properties of homogeneous disordered conductors. Our results indicate that electrical transport measurement can not only reveal the underlying charge transport properties of the film but also be a powerful tool to detect the subtle homogeneity of the film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A transparent diode with high rectifying ratio using amorphous indium-gallium-zinc oxide/SiN{sub x} coupled junction

We introduce a transparent diode that shows both high rectifying ratio and low leakage current at process temperature below 250 °C. This device is clearly distinguished from all previous transparent diodes in that the rectifying behavior results from the junction between a semiconductor (amorphous indium-gallium-zinc oxide (a-IGZO)) and insulator (SiN{sub x}). We systematically study the properties of each junction within the device structure and demonstrate that the a-IGZO/SiN{sub x} junction is the source of the outstanding rectification. The electrical characteristics of this transparent diode are: 2.8 A/cm{sup 2} on-current density measured at −7 V; lower than 7.3 × 10{sup −9} A/cm{sup 2} off-current density; 2.53 ideality factor; and high rectifying ratio of 10{sup 8}–10{sup 9}. Furthermore, the diode structure has a transmittance of over 80% across the visible light range. The operating principle of the indium-tin oxide (ITO)/a-IGZO/SiN{sub x}/ITO device was examined with an aid of the energy band diagram and we propose a preliminary model for the rectifying behavior. Finally, we suggest further directions for research on this transparent diode.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancement of thermoelectric figure of merit in β-Zn{sub 4}Sb{sub 3} by indium doping control

We demonstrate the control of phase composition in Bridgman-grown β-Zn{sub 4}Sb{sub 3} crystals by indium doping, an effective way to overcome the difficulty of growing very pure β-Zn{sub 4}Sb{sub 3} thermoelectric material. The crystal structures are characterized by Rietveld refinement with synchrotron X-ray diffraction data. The results show an anisotropic lattice expansion in In-doped β-Zn{sub 4}Sb{sub 3} wherein the zinc atoms are partially substituted by indium ones at 36f site of R-3c symmetry. Through the elimination of ZnSb phase, all the three individual thermoelectric properties are simultaneously improved, i.e., increasing electrical conductivity and Seebeck coefficient while reducing thermal conductivity. Under an optimal In concentration (x = 0.05), pure phase β-Zn{sub 4}Sb{sub 3} crystal can be obtained, which possesses a high figure of merit (ZT) of 1.4 at 700 K.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Equation of state of liquid Indium under high pressure

We apply an equation of state of a power law form to liquid Indium to study its thermodynamic properties under high temperature and high pressure. Molar volume of molten indium is calculated along the isothermal line at 710K within good precision as compared with the experimental data in an externally heated diamond anvil cell. Bulk modulus, thermal expansion and internal pressure are obtained for isothermal compression. Other thermodynamic properties are also calculated along the fitted high pressure melting line. While our results suggest that the power law form may be a better choice for the equation of state of liquids, these detailed predictions are yet to be confirmed by further experiment.

36 MATERIALS SCIENCE↗

Optical properties of an indium doped CdSe nanocrystal: A density functional approach

We have studied the electronic and optical properties of a CdSe nanocrystal doped with n-type impurity atom. First principle calculations of the CdSe nanocrystal based on the density functional theory (DFT), as implemented in the Vienna Ab Initio Simulation Package (VASP) was used in the calculations. We have introduced a single Indium impurity atom into CdSe nanocrystal with 1.3 nm diameter. Nanocrystal surface dangling bonds are passivated with hydrogen atom. The band-structure, density of states and absorption spectra of the doped and undopted nanocrystals were discussed. Inclusion of the n-type impurity atom introduces an additional electron in conduction band, and significantly alters the electronic and optical properties of undoped CdSe nanocrystal. Indium doped CdSe nannocrystal have potential applications in optoelectronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of nitrogen ion implantation on the structural and optical properties of indium oxide thin films

: We report here synthesis and subsequent nitrogen ion implantation of indium oxide (In{sub 2}O{sub 3}) thin films. The films were implanted with 25 keV N{sup +} beam for different ion doses between 3E15 to 1E16 ions/cm{sup 2}. The resulting changes in structural and optical properties were investigated using XRD, SEM-EDAX and UV-Vis Spectrometry. XRD studies reveal decrease in crystallite size from 20.06 to 12.42 nm with increase in ion dose. SEM micrographs show an increase in the grain size from 0.8 to 1.35 µm with increase in ion dose because of the agglomeration of the grains. Also, from EDAX data on pristine and N-implanted thin films the presence of indium and oxygen without any traces of impurity elements could be seen. However, at lower ion doses such as 3E15 and 5E15 ions/cm{sup 2}, no evidence of the presence of nitrogen ion was seen. However, for the ion dose of 1E16 ions/cm{sup 2}, evidence of presence of nitrogen can be seen in the EDAX data. Band gap calculations reveal a decrease in band gap from 3.54 to 3.38 eV with increasing ion dose. However, the band gap was found to again show an increase to 3.58 eV at the highest ion dose owing to quantum confinement effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Transition properties of low-lying states in atomic indium

We present here the results of our relativistic many-body calculations of various properties of the first six low-lying excited states of indium. The calculations were performed using the relativistic coupled-cluster method in the framework of the singles, doubles, and partial triples approximation. The lifetime of the [4p{sup 6}]5s{sup 2}5p{sub 3/2} state in this atom is determined. Our results could be used to shed light on the reliability of the lifetime measurements of the excited states of atomic indium that we have considered in the present work.

74 ATOMIC AND MOLECULAR PHYSICS↗

On the shift of the electroluminescence spectra of In{sub x}Ga{sub 1−x}N/GaN structures with various indium contents and various substrate materials caused by the stark effect and mechanical stresses

The shift between the maxima of the electroluminescence spectra of In{sub x}Ga{sub 1−x}N/GaN structures is measured at forward and reverse bias depending on the indium content x in the quantum well and on the substrate material (SiC, AuSn/Si, and Al{sub 2}O{sub 3}). It is established that this shift increases as the indium concentration in the In{sub x}Ga{sub 1−x}N layer and mechanical stresses from the substrate increase.

36 MATERIALS SCIENCE↗

Indium nanowires at the silicon surface

Conductive indium nanowires up to 50 nm in width and up to 10 μm in length are fabricated on the surface of silicon by local resputtering from the probe of an atomic-force microscope. The transfer of indium from the probe of the atomic-force microscope onto the silicon surface is initiated by applying a potential between the probe and the surface as they approach each other to spacings, at which the mutual repulsive force is ~10{sup –7} N. The conductivity of the nanowires ranges from 7 × 10{sup –3} to 4 × 10{sup –2} Ω cm, which is several orders of magnitude lower than that in the case of the alternative technique of heat transfer.

36 MATERIALS SCIENCE↗

Modification of the surface of GaAs and observation of surface enhanced Raman scattering after the diffusion of indium

The results of studies of the surface of GaAs in the presence of indium and phosphorus surfactants are reported. It is shown that, as a result of their diffusion (annealing) at a temperature of 650–670°C, clusters enriched with indium are formed in the GaAs surface region. The clusters can be seen as bright spots in an image obtained by a scanning electron microscope with the use of an in-lens detector. At the same time, studies of the morphology of this surface with an atomic-force microscope show a decrease in the root-meansquare roughness of the surface after annealing (diffusion), which is indicative of the incorporation of In atoms into the GaAs crystal lattice. The clusters are responsible for changes in the Raman spectra. Specifically, an increase in the signal intensity due to surface-enhanced Raman scattering and a shift of the vibration frequency in the surface region are observed. It is found that cluster formation is defined by the crystallographic orientation of the surface and by the technological conditions of surface preparation.

36 MATERIALS SCIENCE↗

Electrical Properties of Indium-Oxide Thin Films Produced by Plasma-Enhanced Reactive Thermal Evaporation

The structure and electrical properties of transparent indium-oxide thin films produced by plasma-enhanced reactive thermal evaporation at different substrate temperatures are studied. It is found that the films have a grained structure. An increase in the substrate temperature yields a considerable increase in the conductivity of the films and a decrease in the photoconductivity-relaxation time. An interpretation of the effect of the substrate temperature on the observed changes in the electrical and photoelectric properties of the indium-oxide films under study is proposed.

36 MATERIALS SCIENCE↗

Spontaneous Formation of Indium Clusters in InN Epilayers Grown by Molecular-Beam Epitaxy

We have studied the influence of growth conditions on the number of metallic indium clusters formed spontaneously in indium nitride (InN) layers grown by nitrogen plasma-assisted molecular-beam epitaxy (PAMBE). InN epilayers of N-and In-polarity were grown on c-sapphire substrates and GaN and AlN templates, respectively. N-polar layers were obtained in the standard PAMBE regime, while In-polar layers were grown using a three-stage regime including the stages of epitaxy with enhanced atomic migration and interruption of growth under nitrogen flow. A series of samples were prepared at various growth temperatures and relative In/N flow rates. Measurement of the magnetic-field dependences of the Hall-effect coefficient and its model approximation were used to determine the percentage content of In clusters in various InN layers and the minimum amount of such inclusions that can be achieved by varying the conditions of MBE growth.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Relevance of the Preparation of the Target for PLD on the Magnetic Properties of Films of Iron-Doped Indium Oxide

This paper concerns the importance of the preparation of the targets that may be used for pulsed laser deposition of iron-doped indium oxide films. Targets with a fixed concentration of iron are fabricated from indium oxide and iron metal or one of the oxides of iron, FeO, Fe3O4 and Fe2O3. Films from each target were ablated onto sapphire substrates at the same temperature under different oxygen pressures such that the thickness of the films was kept approximately constant. The films were studied using X-ray diffraction, X-ray absorption (both XANES and EXAFS), optical absorption and magnetic circular dichroism. The magnetic properties were measured with a SQUID magnetometer. At the lowest oxygen pressure, there was evidence that some of the iron ions in the films were in the state Fe2+, rather than Fe3+, and there was also a little metallic iron; these properties were accompanied by a substantial magnetisation. As the amount of the oxygen was increased, the number of defect phases and the saturation magnetisation was reduced and the band gap increased. In each case, we found that the amount of the oxygen that had been included in the target from the precursor added to the effect of adding oxygen in the deposition chamber. It was concluded that the amount of oxygen in the target due to the precursor was an important consideration but not a defining factor in the quality of the films.

(InFe)2O3↗

Enhanced superconducting pairing interaction in indium-doped tin telluride

The ferroelectric degenerate semiconductor Sn{sub 1-{delta}}Te exhibits superconductivity with critical temperatures, T{sub c}, of up to 0.3 K for hole densities of order 10{sup 21} cm{sup -3}. When doped on the tin site with greater than x{sub c} = 1.7(3)% indium atoms, however, superconductivity is observed up to 2 K, though the carrier density does not change significantly. We present specific heat data showing that a stronger pairing interaction is present for x > x{sub c} than for x < x{sub c}. By examining the effect of In dopant atoms on both T{sub c} and the temperature of the ferroelectric structural phase transition, T{sub SPT}, we show that phonon modes related to this transition are not responsible for this T{sub c} enhancement, and discuss a plausible candidate based on the unique properties of the indium impurities.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Enhanced superconducting pairing interaction in indium-doped tin telluride

The ferroelectric degenerate semiconductor Sn{sub 1-{delta}}Te exhibits superconductivity with critical temperatures, T{sub c}, of up to 0.3 K for hole densities of order 10{sup 21} cm{sup -3}. When doped on the tin site with greater than x{sub c} = 1.7(3)% indium atoms, however, superconductivity is observed up to 2 K, though the carrier density does not change significantly. We present specific heat data showing that a stronger pairing interaction is present for x > x{sub c} than for x < x{sub c}. By examining the effect of In dopant atoms on both T{sub c} and the temperature of the ferroelectric structural phase transition, T{sub SPT}, we show that phonon modes related to this transition are not responsible for this T{sub c} enhancement, and discuss a plausible candidate based on the unique properties of the indium impurities.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Enhanced superconducting pairing interaction in indium-doped tin telluride

The ferroelectric degenerate semiconductor Sn{sub 1-{delta}}Te exhibits superconductivity with critical temperatures, T{sub c}, of up to 0.3 K for hole densities of order 10{sup 21} cm{sup -3}. When doped on the tin site with greater than x{sub c} = 1.7(3)% indium atoms, however, superconductivity is observed up to 2 K, though the carrier density does not change significantly. We present specific heat data showing that a stronger pairing interaction is present for x > x{sub c} than for x < x{sub c}. By examining the effect of In dopant atoms on both T{sub c} and the temperature of the ferroelectric structural phase transition, T{sub SPT}, we show that phonon modes related to this transition are not responsible for this T{sub c} enhancement, and discuss a plausible candidate based on the unique properties of the indium impurities.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Turn‐on Circularly Polarized Luminescence in Chiral Indium Chlorides by 5s 2 Metal Centers

Abstract Introducing chirality into the metal‐halide hybrids has enabled many emerging properties including chiroptical activity, spin‐dependent transport, and ferroelectricity. However, most of the chiral metal‐halide hybrids to date are non‐emissive, and the underlying mechanism remains elusive. Here, we show a new strategy to turn on the circularly polarized luminescence (CPL) in chiral metal‐halide hybrids. We demonstrate that alloying Sb 3+ into chiral indium‐chloride hybrids dramatically increases the photoluminescence quantum yield in two new series of chiral indium‐antimony chlorides. These materials exhibit strong CPL signals with tunable energy and a high dissymmetry factor up to 1.5×10 −2 . Mechanistic studies reveal that the emission originates from the self‐trapped excitons centered in 5s 2 Sb 3+ . Moreover, near‐ultraviolet pumped white light is demonstrated with a polarization up to 6.0 %. Our work demonstrates new strategies towards highly luminescent chiral metal‐halide hybrids.

Wang, Zhiyu↗

Turn-on Circularly Polarized Luminescence in Chiral Indium Chlorides by 5s 2 Metal Centers

Introducing chirality into the metal-halide hybrids has enabled many emerging properties including chiroptical activity, spin-dependent transport, and ferroelectricity. However, most of the chiral metal-halide hybrids to date are non-emissive, and the underlying mechanism remains elusive. Here, in this study, we show a new strategy to turn on the circularly polarized luminescence (CPL) in chiral metal-halide hybrids. We demonstrate that alloying Sb 3+ into chiral indium-chloride hybrids dramatically increases the photoluminescence quantum yield in two new series of chiral indium-antimony chlorides. These materials exhibit strong CPL signals with tunable energy and a high dissymmetry factor up to 1.5×10 -2 . Mechanistic studies reveal that the emission originates from the self-trapped excitons centered in 5s 2 Sb 3+ . Moreover, near-ultraviolet pumped white light is demonstrated with a polarization up to 6.0 %. Our work demonstrates new strategies towards highly luminescent chiral metal-halide hybrids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗