Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Heat generation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

A Scalable Process for Upcycling Carbon Dioxide (CO 2 ) and Coal Combustion Residues into Construction Products

Anthropogenic sources of carbon dioxide are generated from a number of sources, but the key among these are ordinary Portland cement (OPC) production and combustion of fossil fuels. Cement production is the largest global CO 2 source from the mineral decomposition of carbonates. Combination of the limestone decomposition and thermal requirements of the clinkering process causes cement production to contribute 8-9% of annual global CO 2 emissions. Combustion of fossil fuels (coal, oil and gas) was shown to contribute a much larger portion of global CO 2 emissions. As of 2018, combustion of fossil fuels accounted for 65% of global CO 2 , where 41% was derived from stationary sources for electricity and heat generation and the other 24% was related to transport. To reduce these contributions, key steps forward in CO 2 utilization technologies are required. The purpose of this project is to demonstrate the feasibility of the Reversa process evolving from a TRL-3 technology at the bench-scale up to TRL-6 technology at the pilot-scale. The reliability of the Reversa technology was tested to prove the effective production of concrete masonry units (CMUs) at bench scale, where the units exceeded the required 13.8 MPa compressive strength requirements. The overall goal of this project was to accelerate the development of a CO 2 mineralization process that synergistically utilizes CO 2 in flue gas and coal combustion residues (CCRs) to synthesize carbonated concrete, a functional replacement for traditional concrete. The culmination of this work resulted in 12 successful production runs at the Integrated Test Center (ITC), Gillette, WY using coal flue gas as a CO 2 source. This was followed by 6 production runs which were completed at the National Carbon Capture Center (NCCC), Wilsonville, AL, using coal-fired and natural gas (NG) flue gas as the CO 2 source. Over the course of the production runs at NCCC and ITC, the CO 2 utilization as a function of time, 24-h CO 2 uptake, electricity usage, and 28-d net area compressive strength recorded for each run. The ITC and NCCC demonstrations achieved an average of 0.19 and 0.1 g CO 2 /g reactant, respectively. Both demonstrations exceeded the project’s target goals of uptake > 0.05 g CO 2 /g reactant. Average compressive strength of the ITC blocks was 18.24 MPa at 28-days. This exceeded the target strength of 13.8 MPa specified by ASTM C90. ITC and NCCC produced an average CO 2 utilization efficiency of 74.9 and 57.9%, respectively. Both demonstration averages were within the target range of 50 to 90% utilization efficiency. For some production runs the NCCC demo did exceeded the a CO 2 utilization efficiency of 75%. An LCA of the Reversa process compared to an industry standard product revealed a net CO 2 reduction of 39% to 42%. This exceeded the target requirement of >25% net CO 2 reduction. Collection of this data was used to determine that the project was successful as the demonstration goals were achieved: (1) achieving in excess of 75% CO 2 utilization efficiency, (2) utilizing greater than 250 kg of CO 2 per production batch/run, and (3) ensuring compliance of carbonated blocks with industry standard specifications (ASTM C90).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Linking DSC/TGA to Cell Levels: Energetics, Evolved Gases, and Thermal Safety of NMC811‐Graphite Micro‐Cell

Thermochemical characterization of battery materials links intrinsic material properties to decomposition pathways, heat generation, and gas evolution that govern performance and safety. Despite extensive work on NMC811-Graphite, variability across partial configurations and the limited adoption of micro-cell architectures (cathode+anode+electrolyte+separator) hinder robust cell-scale interpretation. Accordingly, this work establishes a bottom-up, component-resolved methodology integrating DSC/TGA, evolved gas analysis (EGA), and in situ XRD to link decomposition pathways and energy release across partial and micro-cell configurations, providing a transferable assessment of safety and stability in emerging chemistries. In separator-free configurations, the gas–solid reaction between cathode-evolved O 2 and anode-leached Li dominates the net heat release (1139 J g −1 ). In contrast, in the micro-cell configuration, the separator hinders O 2 transport and alters the timing and pathways of other reactions, and reduces the net energy release to 618 J g −1 . Energy release was organized into defined temperature windows that provide a framework for a thermodynamic model combining quantified gas evolution with selected decomposition pathways and effective reaction enthalpies to estimate net specific energy release, with agreement between DSC and cell-level tests. Ex situ XPS of heat-treated samples extends post-mortem analysis to thermal-abuse regimes, supporting key pathway elements.

25 ENERGY STORAGE↗
DOE OSTI2024

Impact of High-Reactivity Advanced Test Reactor Experiments on Photon Heating in Nearby Experiment Locations

The Advanced Test Reactor’s (ATR’s) distinctive ability to provide a wide range of irradiation conditions is attractive for programs pursuing fuel qualification experiments. These potentially high-fuel-load experiments are a relatively new development and produce unexplored effects on nearby experiments. Here, this paper explores how photon heating of such an experiment may affect other nearby experiment programs, ultimately serving to better inform decisions regarding experiment design and risks to programmatic goals. The MC21 (Monte Carlo for the 21st Century) code is used to model and study how gamma heat generation rates and axial effects impact different ATR positions. The results reveal that the proximity of a given experiment’s position to the high-fuel-load one can significantly alter that experiment’s expected axial profile.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Project Plan: Salt in Situ Heater Test

This project plan gives a high-level description of the US Department of Energy Office of Nuclear Energy (DOE-NE) Spent Fuel and Waste Disposition (SFWD) campaign in situ borehole heater test project planned for the Waste Isolation Pilot Plant (WIPP) site, titled the Brine Availability Test in Salt (BATS). BATS is the first stage in a planned sequence of tests to bolster the technical basis for disposal of heat generating waste in salt. This plan provides an overview of the schedule and responsibilities of the parties involved. This project is a collaborative effort by Sandia, Los Alamos, and Lawrence Berkeley National Laboratories to execute a series of small-diameter borehole heater tests in salt for the DOE-NE SFWD campaign. Design of a heater test in salt at WIPP has evolved over several years. The experiment has begun in January 2020 and the first phase will continue for several months with the possibility for follow on testing. BATS comprises a suite of modular tests, which consist of a group of adjacent horizontal boreholes in the wall of drifts at WIPP. Each test is centered around a packer-isolated heated borehole (12.2 cm [4.81 diameter) containing equipment for water-vapor collection and borehole closure monitoring, surrounded by smaller-diameter (up to 5.3 cm [2.11 diameter) satellite observation boreholes. Observation boreholes contain grouted-in temperature sensors, electrical resistivity tomography (ERT) sensors, and fiber optics; packer-isolated tracer release and sampling intervals; and acoustic emission (AE) piezoelectric sensors. A larger-diameter (12.2 cm [4.81) satellite borehole includes sorel and salt cement plugs, as part of an engineered barrier sealing test. The first two tests, to be implemented in parallel, are heated (target borehole wall temperature of 120 °C) and unheated, with similar arrays of observation borehole monitoring changes. Follow-on tests will be designed using information gathered from the first two tests, and may be conducted at other borehole wall temperatures, use multiple observation boreholes, and may include different measurement types and test designs. This 2020 update of the original 2018 project plan satisfies DOE-NE Spent Fuel and Waste Science and Technology (SFWST) milestone M3SF-205N010303034, as part of the SNL "Salt Disposal R&D" work package.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Demonstration of gold nanorod systems for enhanced total efficiency: Experimental and numerical analysis

This study investigates the photothermal performance of gold nanorods engineered to exhibit longitudinal plasmon resonances at 695 nm, 780 nm, and 970 nm. The work combines synthesis, structural characterization, extinction measurements, numerical modeling, and controlled temperature experiments to quantify how nanorod geometry, resonance tuning, concentration, and chamber shape jointly influence heat generation. Transmission electron microscopy confirms that increasing nanorod aspect ratio systematically shifts the longitudinal plasmon peak toward the near-infrared region. Extinction measurements show strong agreement with theoretical predictions, validating the numerical model across two independent datasets. Three chamber geometries were tested under laser excitation at 640 nm, 808 nm, and 980 nm: an ascending stepped base, a flat base, and a descending stepped base. Without nanorods, the ascending geometry produced the highest efficiency due to enhanced natural convection. After introducing gold nanorods, all geometries exhibited substantial thermal enhancement, with total efficiencies exceeding 20%. The strongest improvement was obtained for nanorods resonant at 780 nm with a mass concentration of 4.6 mg/mL implemented on the descending stepped-base geometry. This performance resulted from the combined effect of spectral overlapping with the 808 nm laser, the highest nanorod concentration, and localized heat accumulation that intensified buoyancy-driven flow. The findings demonstrate that total efficiency is governed by a synergistic interplay between optical resonance, nanoparticle concentration, and macroscopic chamber design, revealing the system-level coupling between nanoscale plasmonic absorption and macroscale heat-transfer phenomena. The results provide a validated framework for tuning nanoscale plasmonic absorbers and optimizing thermal systems for applications requiring efficient light-to-heat conversion.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

Oscillatory and Collective Dynamics of Gold‐Nanoparticle‐Laden Droplets Driven by Photothermal‐Induced Thermocapillarity

Droplets have long intrigued researchers due to their ability to exhibit complex and fascinating behavior when subjected to external stimuli. Here, a coupled oscillatory behavior of gold-nanoparticle-surfactant-laden aqueous droplets is investigated at an oil-oil interface stimulated by light. This study shows that the interaction between light and the droplets gives rise to a range of oscillatory modes, including bouncing and clustering, where droplets exhibit collective movement. From experiment and numerical simulations, this study elucidates the underlying mechanism: upon laser irradiation, gold nanoparticles convert light into heat, generating asymmetric thermal gradients that drive upward thermocapillary flows and a hydrodynamic force from photothermal convection. These forces compete with gravity and buoyancy to induce droplet bouncing, while the resulting asymmetric flow fields bias neighboring droplets toward the illuminated droplet, leading to clustering. These findings not only expand the library of dynamic droplet behavior but also offer insights into the potential applications of light-driven systems in materials science, soft robotics, and microfluidics.

Marangoni effect↗
DOE OSTI2024

The Role of Lignin Molecular Weight on Activated Carbon Pore Structure

Over the past decade, the production of biofuels from lignocellulosic biomass has steadily increased to offset the use of fuels from petroleum. To make biofuels cost-competitive, however, it is necessary to add value to the “ligno-” components (up to 30% by mass) of the biomass. The properties of lignin, in terms of molecular weight (MW), chemical functionality, and mineral impurities often vary from biomass source and biorefinery process, resulting in a challenging precursor for product development. Activated carbon (AC) is a feasible target for the lignin-rich byproduct streams because it can be made from nearly any biomass, and it has a market capacity large enough to use much of the lignin generated from the biorefineries. However, it is not known how the variability in the lignin affects the key properties of AC, because, until now, they could not be well controlled. In this work, various fractions of ultraclean (<0.6% ash) lignin are created with refined MW distributions using Aqueous Lignin Purification using Hot Agents (ALPHA) and used as precursors for AC. AC is synthesized via zinc chloride activation and characterized for pore structure and adsorption capacity. We show that AC surface area and the adsorption capacity increase when using lignin with increasing MW, and, furthermore, that reducing the mineral content of lignin can significantly enhance the AC properties. The surface area of the AC from the highest MW lignin can reach ~1830 m2/g (absorption capacity). Furthermore, single step activation carbonization using zinc chloride allows for minimal carbon burn off (<30%), capturing most of the lignin carbon compared to traditional burn off methods in biorefineries for heat generation.

Biochemistry & Molecular Biology↗
DOE OSTI2025

From Structure to Function: Zn/Mn-Modified Maghemite as an Advanced Nanoplatform for Magnetic Hyperthermia and Radionuclide Therapy

The development of nanoplatforms capable of efficient heat generation and stable radionuclide delivery is essential for effective bimodal cancer therapy. Here, in this study, binary (Fe–M) and ternary (Fe–M–M′) metal oxide nanoparticles were synthesized via a polyol method optimized to produce flower-like γ-Fe 2 O 3 (maghemite) structures, with M and M′ representing Zn and/or Mn. Comprehensive structural and magnetic characterization was conducted to explain the relationship between composition, defect structure, and hyperthermic performance. The analyses revealed that cation substitution induced an Fe-site vacancy, primarily at octahedral positions, leading to local structural distortions, as confirmed by powder X-ray diffraction and pair distribution function analysis. The optimized composition, with Zn/Mn/Fe = 0.040:0.182:1, exhibited the highest concentration of vacancies and structural disorder. These vacancies altered the bonding environment, enhancing magnetic interactions at tetrahedral sites while weakening those at the octahedral positions. The resulting multicore nanoflowers (20–63 nm; core size 13–18 nm) displayed strong heating performance, with intrinsic loss power ranging from 0.34 to 5.77 nHm 2 kg –1 . The optimized sample achieved a temperature increase of 30 °C within 2 min and a specific absorption rate of 369 W g –1 . This composition was further coated with citrate (CA) and successfully radiolabeled with 177 Lu, achieving a radiolabeling yield of 92.7% and excellent stability, thus forming a robust nanoplatform for combined magnetic hyperthermia and radionuclide therapy. Biological evaluation of the optimized S5 composition revealed selective cytotoxicity toward HeLa and LS174 cells, while toxicity was significantly lower to A549, A375, and normal MRC-5 cells. Citrate coating of S5 nanoparticles (S5@CA) drastically reduced their cytotoxicity across all tested cell lines (IC 50 > 200 μg mL –1 ), confirming their enhanced biocompatibility for therapeutic applications. In HeLa cells subjected to magnetic hyperthermia, the viability decreased to approximately 84% after 30 min and 61% after 60 min of treatment, demonstrating the sustained hyperthermic effect at a controlled working temperature of 48 °C. These results underscore the effectiveness of cation substitution and vacancy engineering in tailoring the functional properties of maghemite-based nanomaterials for advanced multimodal cancer therapies.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Unification of nonequilibrium molecular dynamics and the mode-resolved phonon Boltzmann equation for thermal transport simulations

Nano-size confinement induces many intriguing non-Fourier heat conduction phenomena, such as nonlinear temperature gradients, temperature jumps near the contacts, and size-dependent thermal conductivity. Over the past decades, these effects have been studied and interpreted by nonequilibrium molecular dynamics (NEMD) and phonon Boltzmann transport equation (BTE) simulations separately, but no theory that unifies these two methods has ever been established. In this work, we unify these methods using a quantitative mode-level comparison and demonstrate that they are equivalent for various thermostats. We show that different thermostats result in different non-Fourier thermal transport characteristics due to the different mode-level phonon excitations inside the thermostats, which explains the different size-dependent thermal conductivities calculated using different reservoirs, even though they give the same bulk thermal conductivity. Specifically, the Langevin thermostat behaves like a thermalizing boundary in phonon BTE and provides mode-level thermal-equilibrium phonon outlets, while the Nose-Hoover chain thermostat and velocity rescaling method behave like biased reservoirs, which provide a spatially uniform heat generation and mode-level nonequilibrium phonon outlets. These findings explain why different experimental measurement methods can yield different size-dependent thermal conductivity. They also indicate that the thermal conductivity of materials can be tuned for various applications by specifically designing thermostats. Finally, the unification of NEMD and phonon BTE will largely facilitate the study of thermal transport in complex systems in the future by, e.g., replacing computationally unaffordable first-principles NEMD simulations with computationally less expensive spectral BTE simulations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Life cycle assessment of utilizing freshly cut urban wood: A case study

Large amounts of urban wood resources are generated through tree removals in urban areas. Therefore, there is a growing interest to improve the environmental performance of the urban wood supply chain by quantifying the environmental impacts of creating high-value products from urban tree removals to enhance its utilization. By surveying existing urban wood utilization operations for primary data in two major cities: Baltimore, Maryland, and Milwaukee, Wisconsin, a new life cycle inventory (LCI) dataset per m 3 of dry urban hardwood lumber and live edge slabs was created. Incorporating the new LCI data into life cycle assessment method, the total global warming (GW) impact of converting urban trees to kiln-dried lumber was estimated to be 122 kg CO 2 eq and 336 kg CO 2 eq per m 3 of lumber produced for Baltimore and Milwaukee, respectively. In both cases, the total environmental impact of the product was dominated by the conversion of urban trees to kiln dried lumber at the sawmill processing stage. Using scenario analysis for the source of heat generation used in kiln (force) drying wood, substituting wood fuel from coproducts for natural gas in a boiler for Milwaukee resulted in a substantial reduction in fossil-derived GW impact. Urban and traditional hardwood lumber production follow similar GW impact trajectories over their life-cycle stages with the lumber processing stage having the highest environmental impacts for both. Finally, increasing the overall lumber yield and decreasing kiln (force) drying would substantially improve the environmental performance of urban hardwood lumber and help make it comparable to traditional lumber.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Understanding the Nature of Capacity Decay and Interface Properties in Li//LiNi 0.5 Mn 1.5 O 4 Cells by Cycling Aging and Titration Techniques

The spinel structure LiNi 0.5 Mn 1.5 O 4 (LNMO) is a propitious cathode material for next-generation lithium-ion batteries for fast charge–discharge applications, but its capacity decay mechanism and rate-limiting process are not yet well understood. In this work, electrochemical impedance spectroscopy (EIS) with galvanostatic intermittent titration (GITT) and cycling aging techniques were employed to investigate the nature of capacity decay in disordered-phase LNMO. Different resistive components were separated after every 10 cycles. Cell overvoltages (ΔVs) due to ohmic conduction, charge transfer (CT), and concentration polarization (CP) were individually determined. Results revealed that the cell exhibited a higher ΔV at a higher discharged state. However, the ΔV value for CP was higher at a higher state of charge (SOC), and the overall LNMO/electrolyte interface played a major role in the rate-determining step. Battery life was estimated based on the results. Battery calendar life was found to be more vulnerable than cycle life. Furthermore, results also indicated that the working SOC range could be optimized based on the resistance analysis by avoiding those SOCs that have the most detrimental impact (e.g., heat generation and fire hazard).

25 ENERGY STORAGE↗
DOE OSTI2020

Overview of Salt Repository Research and Development for Spent Nuclear Fuel and High-level Nuclear Waste in the United States - 20307

This paper summarizes the current US Department of Energy Office of Nuclear Energy's (DOE-NE) work towards developing and executing a research and development program that addresses both scientific and technical issues related to long-term disposal of spent nuclear fuel (SNF) and high-level waste (HLW) in a hypothetical bedded salt based geological repository. A primary goal of the program is to create a generic Geologic Disposal Safety Assessment (GDSA) Framework that can be used to help guide decisions on siting a possible future bedded salt repository. The generic GDSA work includes analysis of the impacts of heat generation caused by decay of short-lived radionuclides. We report progress in four primary areas. First, we discuss the development and recent modifications of a research and development road-map. Second, we briefly describe an experimental approach to better understand thermal processes in salt. Third, we highlight collaborations with the international research community that leverage salt-based repository science around the world. Finally, we discuss how our findings are being used to aid in the development of a generic safety assessment for a bedded salt repository containing SNF and HLW. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Modeling shock-induced void collapse in single-crystal Ta systems at the mesoscales

Understanding the role of microstructural heterogeneities on the shock wave propagation and defect evolution behavior is essential to predicting the dynamic response of metals. Heterogeneities, such as voids, provide challenges to understanding the wave propagation behavior as the shock-void interaction can collapse the void and result in large plastic strains and significant heating (hot spot formation) in the metal. Accurate modeling of this phenomenon requires predicting the void collapse mechanisms and the related heat generation and dissipation mechanisms (hotspot formation) that determine the microstructure evolution. While molecular dynamics (MD) simulations can model the void collapse behavior, the time/length scale capabilities pose a challenge to connect with continuum models or the experimental scales. Here, this study presents the capability of the newly developed quasi-coarse-grained dynamics (QCGD) method that extends the MD simulations to larger system sizes and longer times to model this phenomenon. This study uses QCGD simulations to investigate the mechanisms of shock wave interactions with pre-existing voids in single-crystal Ta microstructures for variations in shock pressures, void size, and loading orientations. For a given orientation, the plasticity contributions and rates of void collapse are observed to vary with shock pressures and void size. The larger void sizes and higher pressures result in increased temperatures (hot spots) and faster void collapse rates and unravel the variations in the plasticity contributions. In addition, QCGD simulations investigate the post-collapse microstructure evolution as a release wave travels through the hot spot region. The simulations reveal that the reduction in temperatures due to heat dissipation initiates the dynamic recrystallization behavior in the hotspot regions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Opportunities for Solar Industrial Process Heat in the United States

This presentation summarizes the first national analysis of opportunities for solar technologies to provide industrial process heat (IPH) in the United States. The industrial sector is a major end-user of energy and IPH constitutes a majority of industrial fuel energy. New disaggregations of IPH demands are made at the temporal, geographic, and operational levels. Solar heat generation by seven solar thermal technologies and PV-connected electrotechnologies are modeled using county solar resources and land availability and matched to relevant IPH demands. Parabolic trough collectors (PTC), when combined with thermal energy storage (TES), not only have the largest opportunity in terms of distribution over geography and time, but also in terms of applicable IPH demands. PTC with TES represents the displacement of nearly 2,500 trillion Btus of combustion fuels, which corresponds to 137 million metric tons of CO2, or about 15% of all industrial combustion CO2 emissions. TES, along with site-level analysis, are identified as areas of further analysis.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2021

Al 2 O 3 /TiO 2 coated separators: Roll-to-roll processing and implications for improved battery safety and performance

Heat generation is one of the major concerns with lithium-ion batteries (LIB) while charging them at higher currents, which could inadvertently impact the rate performance and reduce the safety of the cell. Polymer separator is one of the least thermal conductive components of a LIB. In addition, commercial separators for LIB are made from polyolefin membranes that tend to shrink and curl at higher temperatures due to their lower melting temperature (~130 °C). Developing separators with improved thermal stability and higher electrolyte uptake is essential for enhancing the safety as well as the performance of the LIB. In this work, a thin layer of ceramic coatings (Al 2 O 3 and TiO 2 ) is applied on propylene (PP) membrane to improve the thermal stability and electrolyte affinity without compromising the rate performance. A slurry with 100% Al 2 O 3 coated on the polypropylene separator exhibited the best improvement in thermal stability ( shrinkage of 0.6% vs 6.0% for uncoated membrane) and excellent rate performance with 92% capacity retention at 2C. The Al 2 O 3 coated separator demonstrated excellent electrolyte wettability compared to the uncoated membrane. The cross-plane thermal conductivity of the ceramic coated separators is analyzed to understand their heat transfer behavior. The thermal conductivity of the separator is improved by ~3.2 times with the Al 2 O 3 coating.

25 ENERGY STORAGE↗
DOE OSTI2023

High-Temperature Heat Pump Model Documentation and Case Studies

High temperature heat pumps (HTHPs) have the potential to serve two valuable functions in the U.S. industry. First, by valorizing and elevating waste heat streams, HTHPs can improve industrial energy efficiency. Second, by electrifying process heat generation, HTHPs can replace combustion technologies with less carbon-intensive sources of energy and reduce industrial greenhouse gas emissions. In certain applications, the combination of increased efficiency, cost savings, and emissions reduction makes HTHPs a promising component of strategies for industrial electrification and clean energy transition. Researchers at NREL have developed a HTHP model. This model has both a physics-based performance estimation component and an economic evaluation component designed to demonstrate the potential economic competitiveness of HTHPs. This document has three main sections. First, an overview of HTHPs is provided as a literature review of relevant information to provide the reader with state-of-the-art information. Second, a description of the HTHP model is provided along with detailed instructions about how to use the model. Third, case studies are provided to showcase the deployment of the HTHP model.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Thermal Dynamics and Lithium Plating Detection in High‐Power Li‐Ion Batteries for eVTOL Applications

The rapid electrification of aerial transportation is driving the need for high‐performance Li‐ion batteries that can operate reliably under stringent thermal and safety constraints. The unique mission profile of electric Vertical Take‐off and Landing (eVTOL) aircraft necessitates a focused investigation into the thermal behavior and safety characteristics of these batteries. Here, in this study, operando isothermal microcalorimetry is employed to examine the thermal evolution of Li‐ion batteries under cycling conditions representative of eVTOL operations. These findings reveal that high‐power discharge events—such as those during take‐off and landing—shift the thermal response toward exothermic behavior, in contrast to the typically endothermic response expected under near‐equilibrium cycling conditions. Additionally, the results suggest that advanced electrolyte formulations may help suppress excess heat generation, thereby improving battery safety. Notably, the calorimetric results exhibit a distinct thermal signature associated with lithium plating, offering a potential diagnostic for detecting Li plating during eVTOL operation. Overall, this study demonstrates the utility of isothermal microcalorimetry as a valuable tool for assessing thermal risks in Li‐ion batteries for eVTOL applications, and highlights the importance of targeted design strategies to mitigate safety hazards during high‐power demand scenarios.

Li plating↗