Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HEIGHTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Pulse height response of an optical particle counter to monodisperse aerosols

The pulse height response of a right angle scattering optical particle counter has been investigated using monodisperse aerosols of polystyrene latex spheres, di-octyl phthalate and methylene blue. The results confirm previous measurements for the variation of mean pulse height as a function of particle diameter and show good agreement with the relative response predicted by Mie scattering theory. Measured cumulative pulse height distributions were found to fit reasonably well to a log normal distribution with a minimum geometric standard deviation of about 1.4 for particle diameters greater than about 2 micrometers. The geometric standard deviation was found to increase significantly with decreasing particle diameter.

Wilmoth, R. G.↗
NASA NTRS1975

Comparison between reflectivity statistics at heights of 3 and 6 km and rain rate statistics at ground level

An experiment was conducted to study the relations between the empirical distribution functions of reflectivity at specified locations above the surface and the corresponding functions at the surface. A bistatic radar system was used to measure continuously the scattering cross section per unit volume at heights of 3 and 6 km. A frequency of 3.7 GHz was used in the tests. It was found that the distribution functions for reflectivity may significantly change with height at heights below the level of the melting layer.

Crane, R. K.↗
NASA NTRS1977

A method for measuring aircraft height and velocity using dual television cameras

A unique electronic optical technique, consisting of two closed circuit television cameras and timing electronics, was devised to measure an aircraft's horizontal velocity and height above ground without the need for airborne cooperative devices. The system is intended to be used where the aircraft has a predictable flight path and a height of less than 660 meters (2,000 feet) at or near the end of an air terminal runway, but is suitable for greater aircraft altitudes whenever the aircraft remains visible. Two television cameras, pointed at zenith, are placed in line with the expected path of travel of the aircraft. Velocity is determined by measuring the time it takes the aircraft to travel the measured distance between cameras. Height is determined by correlating this speed with the time required to cross the field of view of either camera. Preliminary tests with a breadboard version of the system and a small model aircraft indicate the technique is feasible.

Young, W. R.↗
NASA NTRS1976

Interpolation of a surface from sets of discrete height data of different statistical characteristics

This paper presents and analyzes a method for the interpolation of a unique surface from two sets of independent digital height data of differing statistical characteristics. This method is based on linear prediction and thus relies on the concepts of auto- and cross-covariance functions. The linear prediction algorithm for two sets of digital height measurements is first derived and then evaluated using the method of moving averages and bilinear interpolation for comparison. It is found that the overall root mean square interpolation errors of linear prediction are similar to those from moving averages and bilinear interpolation. This accuracy performance, together with the well known potential for controlled filtering of measuring errors and good-behavior in areas of poor control, makes linear prediction a versatile and general method for interpolating a unique surface from two sets of digital height data, with applications in photogrammetric mapping, remote sensing, and other fields.

Leberl, F.↗
NASA NTRS1977

Theoretical aspects of tidal and planetary wave propagation at thermospheric heights

A simple semiquantitative model is presented which allows analytic solutions of tidal and planetary wave propagation at thermospheric heights. This model is based on perturbation approximation and mode separation. The effects of viscosity and heat conduction are parameterized by Rayleigh friction and Newtonian cooling. Because of this simplicity, one gains a clear physical insight into basic features of atmospheric wave propagation. In particular, we discuss the meridional structures of pressure and horizontal wind (the solutions of Laplace's equation) and their modification due to dissipative effects at thermospheric heights. Furthermore, we solve the equations governing the height structure of the wave modes and arrive at a very simple asymptotic solution valid in the upper part of the thermosphere. That 'system transfer function' of the thermosphere allows one to estimate immediately the reaction of the thermospheric wave mode parameters such as pressure, temperature, and winds to an external heat source of arbitrary temporal and spatial distribution. Finally, the diffusion effects of the minor constituents due to the global wind circulation are discussed, and some results of numerical calculations are presented.

Volland, H.↗
NASA NTRS1977

Determination of ocean wave heights from synthetic aperture radar imagery

A calculation is presented for the cross-correlation of the radar images obtained by processing the same signal data over different portions of the chirp spectrum bandwidth as a function of the center frequency spacings for these portions. This is shown to be proportional to the square of the product of the characteristic function for ocean wave heights and the pupil function describing the chirp spectrum bandwidth used in the processing. Measurements of this function for ocean wave imagery over the coast of Alaska, the North Atlantic, and Monterey Bay, California, and correlation with the significant wave heights reported from ground truth data indicate that the synthetic aperture radar instrument can be used for providing wave height information in addition to the ocean wave imagery.

Jain, A.↗
NASA NTRS1977

On the definition of the Listing-geoid taking into consideration different height systems

An attempt is made to define the geoid on the basis of geodetic height systems determined from sea-surface topographic data. Existing height systems are corrected using sea-surface data. An equipotential surface is then chosen in such a way as to minimize the sum of the squares of the deviations from the corrected height systems. This equipotential surface is defined as the geoid. A least squares procedure is used to realize this definition.

Lelgemann, D.↗
NASA NTRS1979

Optimization of satellite altimeter and wave height measurements

Two techniques for simultaneously estimating altitude, ocean wave height, and signal-to-noise ratio from the GEOS-C satellite altimeter data are described. One technique was based on maximum likelihood estimation, MLE, and the other on minimum mean square error estimation, MMSE. Performance was determined by comparing the variance and bias of each technique with the variance and bias of the smoothed output from the Geos altimeter tracker. Ocean wave height tracking performance for the MLE and MMSE algorithms was measured by comparing the variance and bias of the wave height estimates with that of the expression for the return waveform obtained by a fit to the average output of the 16 waveform sampling gates.

Dooley, R. P.↗
NASA NTRS1978

Measurement of ocean wave heights using the Geos 3 altimeter

Radar altimeter signals transmitted from the low-orbiting satellite Geos 3 were analyzed for two selected orbits over high seas associated with hurricane 'Caroline' in the Gulf of Mexico and a North Atlantic storm. The measured values of significant wave height are in reasonable agreement with surface measurements, provided that the altimeter data are properly edited. The internal consistency of estimated wave heights for the North Atlantic storm, a standard deviation of 0.6 m or less, and the good agreement with surface truth lend credence to the method. A statistical analysis of the pulse slope variation gives estimated values of significant wave height within + or - 1 m of the true values 75% of the time for spatial averaging over 70 km.

Rufenach, C. L.↗
NASA NTRS1979

Geos 3 wave height measurements - An assessment during high sea state conditions in the North Atlantic

The sea state in the North Atlantic Ocean has been monitored in February, 1977 to obtain data for verification of Geos 3 radio altimeter wave form data. The altimeter sea state data were found to be in good agreement with in situ sea state measurements and with aircraft remote sensing measurements of wave height. The average difference between the supporting data and Geos 3 was 0.34 m, and the standard deviation 0.61 m. Contour maps of sea state constructed for large regions of the earth's oceans on the basis of Geos 3 altimeter measurements exhibited systematic differences from operationally available computerized maps. It is thought that the underestimation of significant wave height maxima in the operational maps and the underestimation of the speed of movement of oceanic cyclones may be due to basic errors in the output of atmospheric primitive-equation models. Because of the narrow swath width of the Geos-3 sensor, data from several satellite orbits must be combined to construct contour maps, leading to low values of significant wave heights.

Parsons, C. L.↗
NASA NTRS1979

A brief summary of verification results for the spectral ocean wave model /SOWM/ by means of wave height measurements obtained by Geos 3

Significant wave heights calculated using a computer-based spectral ocean wave model (Pierson et al., 1966; Salfi, 1974; Lazanoff and Stevenson, 1975) from meteorological data have been compared with significant wave heights measured by Geos 3 for 44 orbit segments obtained during 1975 and 1976. The model specifications were found to be biased too low. Discrepancies between calculated and measured wave heights are also attributable to the poor specifications of the winds over the northern hemisphere oceans.

Pierson, W. J.↗
NASA NTRS1980

Coronal holes, the height of the chromosphere, and the origin of spicules

Analysis of 650 microphotometric scans across the solar limb reveals that the H(alpha) chromosphere is slightly taller inside coronal holes than in quiet regions outside holes. The change in height occurs as a step at the hole boundaries; this suggests that the increase with latitude in the average height of spicules found by Lippincott and by Athay was the average result of upward steps at the polar hole boundaries rather than a gradual latitude trend. It is estimated that the power consumed by spicules is of the same order as that returning by conduction from the corona, but the bulk of the spicules (which sets the height of the chromosphere) shows almost no response. It is concluded that spicules are not caused by heat conduction from the corona but are driven from below, suggesting that spicules are more closely connected with the heating of the corona than with its cooling.

Rabin, D.↗
NASA NTRS1981

A comparison of the height distributions of solar flare hard X-rays in thick target and thermal models

Using recent observations of solar hard X-ray bursts having a spatial resolution of a few arcsec, a computation is made of the theoretically predicted spatial variation of hard X-ray flux versus height in both thick target nonthermal and thermal models of solar hard X-ray bursts. The work on the thick target model revises previous results in this area by adopting a more realistic model for the flaring atmospheric structure and also by taking into account energy loss and scattering processes in the evolution of the nonthermal electron beam which have previously been neglected. It is noted that in the so-called 'thermal' model currently in vogue there is a substantial nonthermal bremsstrahlung component at all photon energies; it is further demonstrated that this nonthermal component results in a hard X-ray flux versus height distribution whose maximum brightness per unit length is, similarly to the thick target model, located in the chromosphere and not in the thermal source itself. The characteristics of the hard X-ray height distributions in both thick target and thermal models are summarized and compared.

Emslie, A. G.↗
NASA NTRS1981

Spatial and Temporal scales of time-averaged 700 MB height anomalies

The monthly and seasonal forecasting technique is based to a large extent on the extrapolation of trends in the positions of the centers of time averaged geopotential height anomalies. The complete forecasted height pattern is subsequently drawn around the forecasted anomaly centers. The efficacy of this technique was tested and time series of observed monthly mean and 5 day mean 700 mb geopotential heights were examined. Autocorrelation statistics are generated to document the tendency for persistence of anomalies. These statistics are compared to a red noise hypothesis to check for evidence of possible preferred time scales of persistence. Space-time spectral analyses at middle latitudes are checked for evidence of periodicities which could be associated with predictable month-to-month trends. A local measure of the average spatial scale of anomalies is devised for guidance in the completion of the anomaly pattern around the forecasted centers.

Gutzler, D.↗
NASA NTRS1983

Specifying heights and velocities of cloud motion from geostationary sounding data

Data from the geostationary Visible Infrared Spin-Scan Radiometer (VISSR) Atmospheric Sounder (VAS) for assigning simultaneous heights and velocities of cloud motion winds were processed. The following two techniques are discussed: The technique which delivers qualitative height assignments from imagery; and which uses the radiometric information contained in the VAS data to calculate quantitative heights.

Menzel, P.↗
NASA NTRS1983

Techniques for Analysis of DSN 64-meter Antenna Azimuth Bearing Film Height Records

The DSN 64-m antennas use oil pad azimuth thrust bearings. Instrumentation on the bearing pads measures the height of the oil film between the pad and the bearing runner. Techniques to analyze the film height record are developed and discussed. The analysis techniques present the unwieldy data in a compact form for assessment of bearing condition. The techniques are illustrated by analysis of a small sample of film height records from each of the three 64-m antennas. The results show the general condition of the bearings of DSS 43 and DSS 63 as good to excellent, and a DSS 14 as marginal.

Stevens, R.↗
NASA NTRS1982

A tutorial assessment of atmospheric height uncertainties for high-precision satellite altimeter missions to monitor ocean currents

Information from a number of sources is synthesized, and an error budget is deduced giving the projected overall height uncertainty correction for a suggested next-generation high-precision radar altimeter. Uncertainties deriving from the wet and dry troposphere, clouds, and the ionosphere are reviewed. It is assumed that the next generation of precision altimeters will be dual-frequency (13.5 and 6 GHz) and will be designed to correct for the ionospheric error. The altimeter-carrying satellite will have a nadir pointing near coincident-beam dual-frequency microwave radiometer for mitigating the wet tropospheric uncertainty. Whereas there are a number of caveats, the combined uncertainty in the height correction due to the atmosphere for the suggested system should be nominally 3 cm rms compared with at least 6 cm associated with the Seasat-A mission. Improvements in height resolution of the kind discussed here are considered vital for future satellite missions designed to monitor ocean currents.

Goldhirsh, J.↗
NASA NTRS1983

A sea surface height estimator using synthetic aperture radar complex imagery

A method is developed for estimating the sea surface height using the complex imagery from synthetic aperture radar (SAR). Algorithms are developed for the envelope and phase demodulation, regression, and filtering of the SAR complex imagery and are applied to simulated and actual satellite radar SEASAT-SAR data. A simulation of a simplified stationary scene is utilized in order to establish tentative sufficient conditions on large-scale SAR and sampling parameters for the accurate estimation of the scale structure's height. It is shown that the algorithm accurately estimated a long wavelength low-amplitude sea height structure present in the SEASAT-SAR data, which was determined to be consistent with observations.

Harger, R. O.↗