SEARCH · Engineering Papers

Results for “HARMONICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

DOE OSTI2016

A harmonic balance method for PDEs

In this report, we describe some approaches to calculate the non-linear system of equations prescribed by the harmonic balance method (HB), a frequency domain analysis technique for modelling a non-linear system of partial differential equations (PDEs). The approach which we ultimately pursue can be seen as a time-collocation approach, except that the harmonic balance equations are obtained weakly (in the sense used in the calculus of variations). This weak formulation allows us to adapt existing transient or stationary PDEs models in the Panzer/Trilinos framework for frequency domain analysis via the harmonic balance method. We begin with a motivatation for the harmonic balance method and outline its mathematical formulation. We then describe some approaches to calculate the harmonic balance formulae, and their means of implementation through the modification of a Panzer tutorial problem - a stationary Helmholtz equation with a constant Dirichlet boundary condition and a non-linear source. For each of these approaches, we outline the necessary adaptations to solve the corresponding (periodically) transient Helmholtz equation with a (temporally) periodic Dirichlet boundary condition and non-linear source.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2022

Inherent Anharmonicity of Harmonic Solids

Atomic vibrations, in the form of phonons, are foundational in describing the thermal behavior of materials. The possible frequencies of phonons in materials are governed by the complex bonding between atoms, which is physically represented by a spring-mass model that can account for interactions (spring forces) between the atoms (masses). The lowest-order, harmonic , approximation only considers linear forces between atoms and is thought incapable of explaining phenomena like thermal expansion and thermal conductivity, which are attributed to nonlinear, anharmonic , interactions. Here, we show that the kinetic energy of atoms in a solid produces a pressure much like the kinetic energy of atoms in a gas does. This vibrational or phonon pressure naturally increases with temperature, as it does in a gas and therefore results in a thermal expansion. Because thermal expansion thermodynamically defines a Grüneisen parameter γ , which is a typical metric of anharmonicity, we show that even a harmonic solid will necessarily have some anharmonicity. A consequence of this phonon pressure model is a harmonic estimation of the Grüneisen parameter as γ ≈ 3 / 2 3 − 4 x 2 / 1 + 2 x 2 , where x = v t / v l is the ratio of the transverse and longitudinal speeds of sound. We demonstrate the immediate utility of this model by developing a high-throughput harmonic estimate of lattice thermal conductivity that is comparable to other state-of-the-art estimations. By linking harmonic and anharmonic properties explicitly, this study provokes new ideas about the fundamental nature of anharmonicity, while also providing a basis for new material engineering design metrics.

42 ENGINEERING↗

NASA NTRS1982

A problem in representing the core magnetic field of the earth using spherical harmonics

Although there are computational advantages to the representation of the earth's magnetic field by spherical harmonic coefficients of the magnetic potential, up to the thirteenth degree and order, the following disadvantages emerge: (1) the use of spherical harmonics of up to a certain degree does not remove wavelengths greater than a certain value from the surface fields, and (2) the total field magnitudes represented by spherical harmonics up to a certain degree have minimum wavelengths equal to the circumference of the earth divided by twice the maximum degree of the harmonic used. The implications of the ways in which surface fields are separated into core and crustal components are discussed, and it is concluded that since field signals are generated in the core, the representation of the core field by spherical harmonics of potential does not adequately represent all core field components.

Carle, H. M.↗

NASA NTRS1984

Fundamental and harmonic emission in interplanetary type 2 radio bursts

Three interplanetary type II radio bursts which show two prominent and long duration bands in their dynamic spectra were analyzed in detail and compared to similar bands in meter wavelength type II events. These bands, which differ by a factor of about two in frequency, were interpreted in terms of fundamental and harmonic emission. The fundamental component has a greater average intensity than the harmonic, due largely to short intense brightenings. The fundamental spectral profile is more narrow than that of the harmonic, with harmonic band typically exhibiting a larger bandwidth to frequency ratio than the fundamental by a factor of two. The fundamental has a larger source size than the harmonic, 160 degrees versus 110 degrees, on average, as viewed from the Sun. Two of the events have source positions which correlate well with the associated flare positions.

Lengyel-Frey, D.↗

NASA NTRS1985

Fundamental and harmonic emission in interplanetary type II radio bursts

Three interplanetary type II radio bursts which show two prominent and long duration bands in their dynamic spectra were analyzed in detail and compared to similar bands in meter wavelength type II events. These bands, which differ by a factor of about two in frequency, were interpreted in terms of fundamental and harmonic emission. The fundamental component has a greater average intensity than the harmonic, due largely to short intense brightenings. The fundamental spectral profile is more narrow than that of the harmonic, with harmonic band typically exhibiting a larger bandwidth to frequency ratio than the fundamental by a factor of two. The fundamental has a larger source size than the harmonic, 160 degrees versus 110 degrees, on average, as viewed from the sun. Two of the events have source positions which correlate well with the associated flare positions.

Lengyel-Frey, D.↗

NASA NTRS2007

The Local Stellar Velocity Field via Vector Spherical Harmonics

We analyze the local field of stellar tangential velocities for a sample of 42,339 nonbinary Hipparcos stars with accurate parallaxes, using a vector spherical harmonic formalism.We derive simple relations between the parameters of the classical linear model (Ogorodnikov-Milne) of the local systemic field and low-degree terms of the general vector harmonic decomposition. Taking advantage of these relationships, we determine the solar velocity with respect to the local stars of (V(sub X), V(sub Y), V(sub Z)) = (10.5, 18.5, 7.3) +/- 0.1 km s(exp -1) not for the asymmetric drift with respect to the local standard of rest. If only stars more distant than 100 pc are considered, the peculiar solar motion is (V(sub X), V(sub Y), V(sub Z)) = (9.9, 15.6, 6.9) +/- 0.2 km s(exp -1). The adverse effects of harmonic leakage, which occurs between the reflex solar motion represented by the three electric vector harmonics in the velocity space and higher degree harmonics in the proper-motion space, are eliminated in our analysis by direct subtraction of the reflex solar velocity in its tangential components for each star...

kinematics↗

NASA NTRS2014

Driving an Active Vibration Balancer to Minimize Vibrations at the Fundamental and Harmonic Frequencies

Vibrations of a principal machine are reduced at the fundamental and harmonic frequencies by driving the drive motor of an active balancer with balancing signals at the fundamental and selected harmonics. Vibrations are sensed to provide a signal representing the mechanical vibrations. A balancing signal generator for the fundamental and for each selected harmonic processes the sensed vibration signal with adaptive filter algorithms of adaptive filters for each frequency to generate a balancing signal for each frequency. Reference inputs for each frequency are applied to the adaptive filter algorithms of each balancing signal generator at the frequency assigned to the generator. The harmonic balancing signals for all of the frequencies are summed and applied to drive the drive motor. The harmonic balancing signals drive the drive motor with a drive voltage component in opposition to the vibration at each frequency.

Holliday, Ezekiel S.↗

NASA NTRS2018

Contributions of Spherical Harmonics to Gravitational Moment

A scalar gravitational potential function expressed as a series of spherical harmonics frequently serves as the basis for a model of an astronomical body's gravitational field. The contribution of a generic spherical harmonic to gravitational gradient is expressed as a dyadic, which is then used to obtain an analytical expression in vector-dyadic form for the contribution to the moment of gravitational forces about the mass center of a small body such as a spacecraft. The expression developed for a harmonic's contribution to gravitational gradient can be applied in areas beyond the scope of the paper; for example, gravitational gradient plays an important role in the state propagation matrix and the state transition matrix that are used in spacecraft trajectory targeting and Kalman filtering. Additionally, it can be employed in numerical simulations of orbit determination based on measurements obtained with a gradiometer in low-Earth orbit. Contributions of spherical harmonics to gravitational moment may be of interest in connection with attitude control of a spacecraft in the vicinity of a body with an irregular shape, such as an asteroid. Normalized spherical harmonic coefficients up to degree and order 10 are obtained for the asteroid 216 Kleopatra and used in numerical evaluations of contributions to gravitational moment.

Roithmayr, Carlos M.↗

NASA NTRS2021

GRACE Fast Mascons from Spherical Harmonics and a Regularization Design Trade Study

Mass concentration (mascon) solutions have become a prominent medium for investigating time-variable gravity recovered by GRACE and GRACE Follow-On. While GRACE Level-2 spherical harmonic products require various post-processing techniques to eliminate correlated noise, mascon formulations employ spatial regularization strategies during the estimation step to improve signal recovery. However, mascon estimation has traditionally required large computing resources and GRACE Level-1B processing capabilities. In this study, we show that a typical mascon estimation system can be reformulated to allow for the estimation of regularized mascons from Level-2 spherical harmonics. Provided that spherical harmonic solution covariances are available, the computed mascons will be mathematically equivalent to similar mascons estimated from Level-1B observations. This method is computationally efficient, better leverages GRACE spherical harmonics than past methods, and matches the performance of typical mascon solutions without locking scientists into pre-determined regularization designs. We develop a proof-of-concept solution using ITSG-Grace2018 and compare results with traditional mascons from JPL and NASA GSFC. We then assess the effects of spherical harmonic truncation and use of regularization correlations on basin signal recovery. We find that spherical expansions to degree and order 60 provide the minimum expansion necessary to study most basins, while larger expansions help further localize signals. We also find that diagonal regularizations (i.e., regularizations that do not contain inter-mascon correlations) are adversely affected by leakage, especially across boundaries such as coastlines where signals are not highly correlated, whereas including inter-mascon correlations and regional boundaries in the regularization greatly improves signal recovery.

M. J. Croteau↗

DOE OSTI2019

Impedance-Based Prediction of SSR-Generated Harmonics in Doubly-Fed Induction Generators: Preprint

Doubly-fed induction generators (DFIGs) are prone to subsynchronous resonance (SSR) with series-compensated transmission lines and experiencing SSR-generated harmonics of wide-ranging magnitudes. This paper presents a large-signal impedance-based approach for the prediction of the magnitude of SSR-generated harmonics in DFIGs. Note that the large-signal impedance of a network shows the variation in its impedance response with the magnitude of perturbation at its terminals. It is discovered in this paper that the impedance of a series-compensated transmission line starts changing with the magnitude of SSR because of the metal oxide varistor (MOV) based protection of series capacitors in the line. The changing line impedance locks the growth of SSR beyond a certain point, where the DFIG forms a limit cycle mode and emits harmonics at the SSR frequency. The discovered role of the protection of series-capacitors in SSR not only enables the prediction of the SSR-generated harmonics but it can also be used for the timely detection of an SSR event to avoid system disruption and sudden loss of a bulk generation. The large-signal impedance-based prediction of SSR-generated harmonics in DFIG-based wind and hydro generators is demonstrated using numerical simulations of a 2.5-MW, 690-V DFIG supplying to a series-compensated transmission line.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2020

Will LISA Detect Harmonic Gravitational Waves from Galactic Cosmic String Loops?

Rapid advancement in the observation of cosmic strings has been made in recent years placing increasingly stringent constraints on their properties, with $G\mu\lesssim 10^{-11}$ from Pulsar Timing Array (PTA). Cosmic string loops with low string tension clump in the Galaxy due to slow loop decay and low gravitational recoil, resulting in great enhancement to loop abundance in the Galaxy. With an average separation of down to just a fraction of a kpc, and the total power of gravitational wave (GW) emission dominated by harmonic modes spanning a wide angular scale, resolved loops located in proximity are powerful, persistent, and highly monochromatic sources of GW with a harmonic signature not replicated by any other sources, making them prime targets for direct detection by the upcoming Laser Interferometer Space Antenna (LISA), whose frequency range is well-matched. Unlike detection of bursts where the detection rate scales with loop abundance, the detection rate for harmonic signal is the result of a complex interplay between the strength of GW emission, loop abundance, and other sources of noise, and is most suitably studied through numerical simulations. We develop a robust and flexible framework for simulating loops in the Galaxy for predicting direct detection of harmonic signal from resolved loops by LISA. Our simulation reveals that the most accessible region in the parameter space consists of large loops $\alpha=0.1$ with low tension $10^{-21}\lesssim G\mu\lesssim 10^{-19}$. Direct detection of field theory cosmic strings is unlikely, with the detection probability $p_{\mathrm{det}}\lesssim 2\%$ for a 1-year mission. An extension suggests that direct detection of cosmic superstrings with a low intercommutation probability is very promising. Searching for harmonic GW signal from resolved loops through LISA observations will potentially place physical constraints on string theory.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2014

Resonant third harmonic generation of KrF laser in Ar gas

Investigations of emission of harmonics from argon gas jet irradiated by 700 fs, 5 mJ pulses from a KrF laser are presented. Harmonics conversion was optimized by varying the experimental geometry and the nozzle size. For the collection of the harmonic radiation silicon and solar-blind diamond semiconductor detectors equipped with charge preamplifiers were applied. The possibility of using a single-crystal CVD diamond detector for separate measurement of the 3rd harmonic in the presence of a strong pumping radiation was explored. Our experiments show that the earlier suggested 0.7% conversion efficiency can really be obtained, but only in the case when phase matching is optimized with an elongated gas target length corresponding to the length of coherence.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2014

High-order harmonic generation using a high-repetition-rate turnkey laser

We generate high-order harmonics at high pulse repetition rates using a turnkey laser. High-order harmonics at 400 kHz are observed when argon is used as target gas. In neon, we achieve generation of photons with energies exceeding 90 eV (∼13 nm) at 20 kHz. We measure a photon flux of up to 4.4 × 10{sup 10} photons per second per harmonic in argon at 100 kHz. Many experiments employing high-order harmonics would benefit from higher repetition rates, and the user-friendly operation opens up for applications of coherent extreme ultra-violet pulses in new research areas.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2015

High harmonic generation in underdense plasmas by intense laser pulses with orbital angular momentum

We study high harmonic generation produced by twisted laser pulses, with orbital angular momentum in the relativistic regime, for pulse propagation in underdense plasma. We consider fast time scale processes associated with an ultra-short pulse, where the ion motion can be neglected. We use both analytical models and numerical simulations using a relativistic particle-in-cell code. The present description is valid for relativistic laser intensities, when the normalized field amplitude is much larger than one, a ≫ 1. We also discuss two distinct processes associated with linear and circular polarization. Using both analytical solutions and particle-in-cell simulations, we are able to show that, for laser pulses in a well defined Laguerre-Gauss mode, angular momentum conservation is observed during the process of harmonic generation. Intensity modulation of the harmonic spectrum is also verified, as imposed by the nonlinear time-scale for energy transfer between different harmonics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

Decentralized Carrier Phase Shifting for Optimal Harmonic Minimization in Asymmetric Parallel-Connected Inverters

This paper presents a carrier phase shifting technique for minimizing the aggregate harmonics in networks of asymmetric parallel-connected inverters for distributed power generation system applications. The proposed technique is: 1) implemented in a decentralized manner, relying only on local voltage and current measurements, and 2) optimal in the sense that it minimizes a cost function representing the carrier-frequency current harmonics. The analysis indicates that the proposed optimal carrier phase shifting technique can enable order-of-magnitude reductions in harmonic power, and also universal improvements compared to symmetric carrier interleaving for asymmetric inverter networks. Moreover, compared to existing methods that require either centralized communication or information exchange between inverters to coordinate carriers, the proposed technique is completely decentralized, which provides important practical benefits for implementation, including improved robustness and reduced cost. The technique is experimentally validated on a network of three single-phase 2-kW inverters and demonstrates a 36.5% reduction in the weighted total harmonic distortion factor of the aggregate inverter current, and the ability to converge to the optimal carrier phase spacing dynamically in less than one line frequency cycle (16.7 ms) in steady state and transient operating conditions.

42 ENGINEERING↗

NASA NTRS1995

Simulation of 100-300 GHz solid-state harmonic sources

Accurate and efficient simulations of the large-signal time-dependent characteristics of second-harmonic Transferred Electron Oscillators (TEO's) and Heterostructure Barrier Varactor (HBV) frequency triplers have been obtained. This is accomplished by using a novel and efficient harmonic-balance circuit analysis technique which facilitates the integration of physics-based hydrodynamic device simulators. The integrated hydrodynamic device/harmonic-balance circuit simulators allow TEO and HBV circuits to be co-designed from both a device and a circuit point of view. Comparisons have been made with published experimental data for both TEO's and HBV's. For TEO's, excellent correlation has been obtained at 140 GHz and 188 GHz in second-harmonic operation. Excellent correlation has also been obtained for HBV frequency triplers operating near 200 GHz. For HBV's, both a lumped quasi-static equivalent circuit model and the hydrodynamic device simulator have been linked to the harmonic-balance circuit simulator. This comparison illustrates the importance of representing active devices with physics-based numerical device models rather than analytical device models.

NONLINEAR CIRCUITS↗

DOE OSTI2018

Effects of the Third Harmonic Demagnetization Field on the ac Losses of a Granular FeSeTe Superconductor in ac Field

The first harmonics of the magnetic response, of inter- and intragranular volume fractions of a FeSe{sub 0.5}Te{sub 0.5} granular superconducting sample in an alternate magnetic field, have been numerically extracted from the measured magnetization of the whole system by using a model which considers the effects of the fundamental demagnetization fields generated by the magnetization itself. This allowed us to obtain the temperature and field behaviors of the inter- and intragranular ac losses during an ac cycle. These parameters have been found sensitive to the existence of the third harmonic components of the demagnetization field produced by the corresponding magnetization harmonics of the sample. This confirms that the effects of the magnetic response third harmonic components on the sample magnetization, through the demagnetization field, should be taken into account for a more detailed analysis of the measured ac magnetic curves.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

Large-scale harmonic balance simulations with Krylov subspace and preconditioner recycling

The multi-harmonic balance method combined with numerical continuation provides an efficient framework to compute a family of time-periodic solutions, or response curves, for large-scale, nonlinear mechanical systems. The predictor and corrector steps repeatedly solve a sequence of linear systems that scale by the model size and number of harmonics in the assumed Fourier series approximation. In this paper, a novel Newton–Krylov iterative method is embedded within the multi-harmonic balance and continuation algorithm to efficiently compute the approximate solutions from the sequence of linear systems that arise during the prediction and correction steps. Further, the method recycles, or reuses, both the preconditioner and the Krylov subspace generated by previous linear systems in the solution sequence. A delayed frequency preconditioner refactorizes the preconditioner only when the performance of the iterative solver deteriorates. The GCRO-DR iterative solver recycles a subset of harmonic Ritz vectors to initialize the solution subspace for the next linear system in the sequence. The performance of the iterative solver is demonstrated on two exemplars with contact-type nonlinearities and benchmarked against a direct solver with traditional Newton–Raphson iterations.

97 MATHEMATICS AND COMPUTING↗