Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GOLD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

The adsorption and thermal decomposition of tricresylphosphate (TCP) on iron and gold

Because tricresyl-phosphate (TCP) is a common antiwear additive in lubricants, there is great interest in its interactions with metal substrates. The TCP was allowed to adsorb on polycrystalline iron and gold at room temperature. X-ray photoelectron spectroscopy (XPS) was used to analyze the adsorbed species. The substrate was then heated in steps to 330 C, and the changes in the adsorbate were analyzed after each step. On both substrates saturation adsorption occurred at about one monolayer, but the sticking coefficient was less on gold than on iron. Comparison of the XPS spectra of TCP on each substrate with the spectrum from condensed TCP indicated nondissociative adsorption on gold, possibly by dipole-induced dipole interaction. On iron, there was apparently additional interaction between the substrate and the tolyl groups on the TCP molecule. TCP began to desorb molecularly from gold as soon as the gold was heated above room temperature. The desorption was complete by 200 C. However, when the iron substrate was heated, TCP did not desorb but decomposed between 150 and 250 C.

Wheeler, D. R.↗
NASA NTRS1984

Adhesion between polymers and evaporated gold and nickel films

To obtain information on the adhesion between metal films and polymeric solids, the adhesion force was measured by means of a tensile pull test. It was found that the adhesion strengths between polymeric solids and gold films evaporated on polymer substrates were (1.11 + or - 0.53) multiplied by 10(6) N/M(2) on PTFE, about 5.49 multiplied by 10(6) N/m(2) on UHMWPE, and 6.54x10(6) on 6/6 nylon. The adhesion strengths for nickel films evaporated on PTFE, UHMWPE, and 6/6 nylon were found to be a factor of 1.7 higher than those for the gold coated PTFE, UHMWPE, and 6/6 nylon. To confirm quantitatively the effect of electron irradiation on the adhesion strength between a PTFE solid and metal films, a tensile pull test was performed on the irradiated PTFE specimens, which were prepared by evaporating nickel or gold on PTFE surfaces irradiated by 2-keV electrons for various times. After irradiation, the adhesion strength increased to (4.92 + or - 0.92)x10(6) N/m(2) for nickel coated PTFE and (1.82 + or - 0.48)x10(6) N/m(2) for gold coated PTFE. The improvement in adhesion for nickel is higher than that for gold.

Yamada, Y.↗
NASA NTRS1984

Gold absorbing film for a composite bolometer

The principles governing the design of metal films are reviewed, with attention also given to the choice of metals. A description is then given of the characteristics of a bolometer with a gold absorbing film. It is demonstrated that gold is effective as an absorbing film for a millimeter bolometer operated at 1.5 K. At 1.5 K, gold is significantly better than bismuth since gold has a lower heat capacity for the absorbing film. At 0.3 K, gold and bismuth are both suitable. It is pointed out that at temperatures below 0.3 K, a superconducting absorbing film can have a heat capacity low enough not to dominate the heat capacity of the detector; for this reason, it may give better performance than a nonsuperconducting absorbing film.

Dragovan, M.↗
NASA NTRS1988

The interaction of gold with gallium arsenide

Gold and gold-based alloys, commonly used as solar-cell contact materials, are known to react readily with gallium arsenide. Experiments designed to identify the mechanisms involved in these GaAs-metal interactions have yielded several interesting results. It is shown that the reaction of GaAs with gold takes place via a dissociative diffusion process. It is shown further that the GaAs-metal reaction rate is controlled to a very great extent by the condition of the free surface of the contact metal, an interesting example of which is the previously unexplained increase in the reaction rate that has been observed for samples annealed in a vacuum environment as compared to those annealed in a gaseous ambient. A number of other hard-to-explain observations, such as the low-temperature formation of voids in the gold lattice and crystallite growth on the gold surface, are also explained by invoking this mechanism.

Weizer, Victor G.↗
NASA NTRS1991

Crystal growth of YBa2Cu3O(7-x) and reaction of gold crucible with Ba-Cu-rich flux

YBa2Cu3O(7-x) crystals are grown in a gold crucible by a self-flux method. The flux moves along the gold surface due to surface wetting and leaves Y123 crystals behind. The obtained crystals are clean and have a size up to two millimeters and a Tc is greater than 90 K. In an effort to recycle the used crucibles, it is found that the used gold is contaminated by copper. A CuO thin film is easily formed on the surface of the crucible that is made of the used gold. This film provides good surface wetting and a buffer layer, which reduces the reaction between gold and the Y-Ba-Cu-oxide melt.

Tao, Y. K.↗
NASA NTRS1999

Transmission Measurement of the Third-Order Susceptibility of Gold

Gold nanoparticle composites are known to display large optical nonlinearities. In order to assess the validity of generalized effective medium theories (EMT's) for describing the linear and nonlinear optical properties of metal nanoparticle composites, knowledge of the linear and nonlinear susceptibilities of the constituent materials is a prerequisite. In this study the inherent nonlinearity of the metal is measured directly (rather than deduced from a suitable EMT) using a very thin gold film. Specifically, we have used the z-scan technique at a wavelength near the transmission window of bulk gold to measure the third-order susceptibility of a continuous thin gold film deposited on a quartz substrate surface-modified with a self-assembled monolayer to promote adhesion and uniformity without affecting the optical properties. We compare our results with predictions which ascribe the nonlinear response to a Fermi-smearing mechanism. Further, we note that the sign of the nonlinear susceptibility is reversed from that of gold nanoparticle composites.

Smith, David D.↗
NASA NTRS2008

Gold Nanoparticle Labels Amplify Ellipsometric Signals

The ellipsometric method reported in the immediately preceding article was developed in conjunction with a method of using gold nanoparticles as labels on biomolecules that one seeks to detect. The purpose of the labeling is to exploit the optical properties of the gold nanoparticles in order to amplify the measurable ellipsometric effects and thereby to enable ultrasensitive detection of the labeled biomolecules without need to develop more-complex ellipsometric instrumentation. The colorimetric, polarization, light-scattering, and other optical properties of nanoparticles depend on their sizes and shapes. In the present method, these size-and-shape-dependent properties are used to magnify the polarization of scattered light and the diattenuation and retardance of signals derived from ellipsometry. The size-and-shape-dependent optical properties of the nanoparticles make it possible to interrogate the nanoparticles by use of light of various wavelengths, as appropriate, to optimally detect particles of a specific type at high sensitivity. Hence, by incorporating gold nanoparticles bound to biomolecules as primary or secondary labels, the performance of ellipsometry as a means of detecting the biomolecules can be improved. The use of gold nanoparticles as labels in ellipsometry has been found to afford sensitivity that equals or exceeds the sensitivity achieved by use of fluorescence-based methods. Potential applications for ellipsometric detection of gold nanoparticle-labeled biomolecules include monitoring molecules of interest in biological samples, in-vitro diagnostics, process monitoring, general environmental monitoring, and detection of biohazards.

Venkatasubbarao, Srivatsa↗
DOE OSTI2023

Dendritic gold nanoparticles and methods of synthesis

A method of producing dendritic gold nanoparticles by combining a gold precursor solution, a reducing agent, and a bifunctional peptide having an amine-rich amino acid sequence into a buffered aqueous solution in a single container, and agitating the mixture causing the formation of the dendritic gold nanoparticles having a surface with a positive charge and a second end portion of the bifunctional peptide exposed on the surface of the dendritic gold nanoparticles. The dendritic gold nanoparticles may be used to deliver therapeutic, diagnostic, and/or immunogenic amino acid sequences as portions of the bifunctional peptide.

Mao, Chuanbin↗
DOE OSTI2018

Absorption Spectra of Gold Nanoparticle Suspensions

Three gold nanoparticle suspensions are obtained, and mean radii in distributions – (6.1 ± 0.2), (11.9 ± 0.3), and (17.3 ± 0.7) nm – are determined by the transmission electron microscopy method. The optical absorption spectra of suspensions are obtained and studied. Calculation of spectral dependences of the absorption index of suspensions at values of the gold complex refractive index taken from the literature showed a significant deviation of experimental and calculated data in the region of 450–800 nm. Spectral dependences of the absorption of suspensions are simulated within the framework of the Mie–Drude theory taking into account the interband absorption in the form of an additional term in the imaginary part of the dielectric permittivity of the Gaussian type. It is shown that to quantify the spectral dependences in the region of the plasmon absorption band of nanoparticles, correction of the parameters of the interband absorption is necessary in addition to the increase of the relaxation parameter of the Drude theory. Spectral dependences of the dielectric permittivity of gold in nanodimensional state are refined from the solution of the inverse problem. The results of the present work are important for predicting the special features of operation of photonic devices and optical detonators based on gold nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2019

Ligand Exchange/Scrambling Study of Gold(I)-Phosphine Complexes in the Solid Phase by DESI-MS Analysis

Only a few analytical techniques are available for the characterization of mechanochemical synthetic reaction products. We demonstrate here that DESI-MS is a powerful technique for this purpose, combining the selectivity of MS-based assays with the simplicity and in situ analysis capability of ambient ionization methods. In this work, we report that auranofin, a gold-based drug, and its precursor triethylphosphine gold(I) chloride undergo a complex array of ligand exchange/scrambling reactions with thiol-containing amino acids in the solid state. The products were readily characterized by DESI-MS analysis from the solid-phase reaction, clearly exhibiting ligand exchange and scrambling, with independent confirmation by solid state {sup 13}C-NMR. The thioglucose and triethylphosphine moieties exchanged with cysteine and its derivatives, whereas the glutathione replaced 2,3,4,6-tetra-O-acetyl-β-1-D-glucopyranose only. It was concluded that ligand exchange and scrambling reactions can be carried out in the solid state, and some of the unique products reported in this study can be conveniently prepared through mechanochemical synthesis in good yields (> 98%), as demonstrated by synthesis of (L-cysteinato-S)-triethylphosphine gold(I) from triethylphosphine gold(I) chloride and L-cysteine. .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Source of Bright Near-Infrared Luminescence in Gold Nanoclusters

Gold nanoclusters with near-infrared (NIR) photoluminescence (PL) have great potential as sensing and imaging materials in biomedical and bioimaging applications. In this work, Au 21 (S-Adm) 15 and Au 38 S 2 (S-Adm) 20 are used to unravel the underlying mechanisms for the improved quantum yields (QY), large Stokes shifts and long PL lifetimes in gold nanoclusters. Both nanoclusters show decent PL QY. In particular, the Au 38 S 2 (S-Adm) 20 nanocluster shows a bright NIR PL at 900 nm with QY up to 15% in normal solvents (such as toluene) at ambient conditions. The relatively lower QY for Au 21 (S-Adm) 15 (4%) compared to Au 38 S 2 (S-Adm) 20 is attributed to the lowest-lying excited state being symmetry-disallowed, as evidenced by the pressure-dependent anti-spectral shift of the absorption spectra compared to PL. Yet, Au 21 (S-Adm) 15 maintains some emissive properties due to a nearby symmetry-allowed excited state. Furthermore, our results show that suppression of non-radiative decay due to the surface “lock rings” which encircle the Au kernel and the surface “lock atoms” which bridge the fundamental Au-kernel units (e.g., tetrahedra, icosahedra, etc.) is the key to obtain high QYs in gold nanoclusters. Here, the complicated excited-state processes and the small absorption coefficient of the band-edge transition lead to the large Stokes shifts and the long PL lifetimes that are widely observed in gold nanoclusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Intercomparison of the gold, platinum, and MgO pressure scales up to 140 GPa and 2500 K

In order to intercalibrate the equations of state (EOSs) of the three widely used pressure standards, gold, platinum, and MgO, we have measured their unit cell volumes together in the laser–heated diamond anvil cell up to 140 GPa and 2500 K. At 300 K, three standards agree with each other within ±2.5 GPa to 135 GPa if the EOSs measured in quasi–hydrostatic media are used. We further refined the EOSs at 300 K, making them consistent with each other within ±1 GPa up to 135 GPa. At high temperature ( T ), the three standards match the best within ±1 GPa between 40 and 140 GPa, when we use the scales by Dorogokupets and Dewaele (2007). However, a 2–3 GPa discrepancy remains at 20–40 GPa and 1500–2000 K, with gold yielding the highest pressure ( P ). The pressure discrepancy is likely related to steep decreases in the Grüneisen parameter, the anharmonicity, and/or the electronic effects for the standards at the P–T conditions. Because gold melts near the temperatures expected for the mantle transition zone, severe anharmonic effects expected under premelting conditions make gold unsuitable for determining the phase boundaries in the region. The pressure scales by Dorogokupets and Dewaele (2007) provide tighter constrains on the Clapeyron slopes of the postspinel boundary to –2.0 to –2.7 MPa/K and the postperovskite boundary to 7–10 MPa/K. In conclusion, the data and refined EOSs presented here allow for reliable comparisons among experiments with different pressure standards for the entire P–T conditions expected for the Earth's lower mantle.

58 GEOSCIENCES↗
DOE OSTI2022

Large-Area Periodic Arrays of Atomically Flat Single-Crystal Gold Nanotriangles Formed Directly on Substrate Surfaces

The advancement of nanoenabled wafer-based devices requires the establishment of core competencies related to the deterministic positioning of nanometric building blocks over large areas. Within this realm, plasmonic single-crystal gold nanotriangles represent one of the most attractive nanoscale components but where the formation of addressable arrays at scale has heretofore proven impracticable. In this work, a benchtop process is presented for the formation of large-area periodic arrays of gold nanotriangles. The devised growth pathway sees the formation of an array of defect-laden seeds using lithographic and vapor-phase assembly processes followed by their placement in a growth solution promoting planar growth and threefold symmetric side-faceting. The nanotriangles formed in this high-yield synthesis distinguish themselves in that they are epitaxially aligned with the underlying substrate, grown to thicknesses that are not readily obtainable in colloidal syntheses, and present atomically flat pristine surfaces exhibiting gold atoms with a close-packed structure. As such, they express crisp and unambiguous plasmonic modes and form photoactive surfaces with highly tunable and readily modeled plasmon resonances. The devised methods, hence, advance the integration of single-crystal gold nanotriangles into device platforms and provide an overall fabrication strategy that is adaptable to other nanomaterials.

42 ENGINEERING↗
DOE OSTI2019

Narrow and wide band tunable absorbers based on gold squares dispersed in liquid crystal

In this paper, the absorption behavior of gold squares with different sizes has been investigated. Our study includes gold squares in two, three and four different sizes dispersed in liquid crystal to propose an absorber with post fabrication tunability. In this case, more than 95% narrow band as well as wide band absorptions have been obtained when two and three sizes of gold squares have been used. Moreover, wide band absorption spectrum with the full width at half maximum of about 0.31 µm has been obtained when there are four different sizes of gold squares in our structure. Also, graphene has been utilized to boost the narrow band absorption from about 80 to 95%.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2019

Simultaneous Removal of S and As from a Refractory Gold Ore in a Single Stage O{sub 2}-Enriched Roasting Process

S and As are common impurities in refractory gold ores and must be removed before gold extraction. Thermodynamic analyses show that it is possible to simultaneously remove S and As by an O{sub 2}-enriched single-stage roasting, which is confirmed with experimental results from roasting of a gold refractory ore. The range of optimal O{sub 2} requirement is narrow and varies with the S and As content in the ore. Both the extent of removal of S and As, and the subsequent recovery of gold achieved from the optimized single-stage roasting are comparable to those attained from two-stage roasting processes.

36 MATERIALS SCIENCE↗
DOE OSTI2019

A Study of the Activity of Recombinant Mn-Superoxide Dismutase in the Presence of Gold and Silver Nanoparticles

Superoxide dismutase (SOD) is one of the best characterized enzyme maintaining the redox state in the cell. A bacterial expression system was used to produce human recombinant manganese SOD with a His-tag on the C-end of the protein for better purification. In addition, gold and silver nanoparticles were chemically synthesized in a variety of sizes, and then mixed with the enzyme for immobilization. Analysis by dynamic light scattering and scanning transmission electron microscopy revealed no aggregates or agglomerates of the obtained colloids. After immobilization of the protein on AuNPs and AgNPs, the conjugates were analyzed by SDS-PAGE. It was determined that SOD was adsorbed only on the gold nanoparticles. Enzyme activity was analyzed in colloids of the gold and silver nanoparticles bearing SOD. The presence of a nanoparticle did not affect enzyme activity; however, the amount of protein and size of the gold nanoparticle did influence the enzymatic activity of the conjugate. Our findings confirm that active recombinant human superoxide dismutase can be produced using a bacterial expression system, and that the enzyme can be immobilized on metal nanoparticles. The interaction between enzymes and metal nanoparticles requires further investigation.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

Gallic acid-capped gold nanoparticles inhibit EGF-induced MMP-9 expression through suppression of p300 stabilization and NFκB/c-Jun activation in breast cancer MDA-MB-231 cells

Triple-negative breast cancers (TNBCs) are highly invasive and have a higher rate of distant metastasis. Matrix metalloproteinase-9 (MMP-9) plays a crucial role in EGF/EGFR-mediated malignant progression and metastasis of TNBCs. Various studies have revealed that treatment with gallic acid down-regulates MMP-9 expression in cancer cells, and that conjugation of phytochemical compounds with gold nanoparticles (AuNPs) increases the anti-tumor activity of the phytochemical compounds. Thus, the effect of gallic acid-capped AuNPs (GA-AuNPs) on MMP-9 expression in EGF-treated TNBC MDA-MB-231 cells was analyzed in the present study. The so-called green synthesis of AuNPs by means of gallic acid was performed at pH 10, and the resulting GA-AuNPs had spherical shape with an average diameter of approximately 50 nm. GA-AuNPs notably suppressed migration and invasion of EGF-treated cells, and inhibited EGF-induced MMP-9 up-regulation. GA-AuNPs abrogated EGF-induced Akt/p65 and ERK/c-Jun phosphorylation, leading to down-regulation of MMP-9 mRNA and protein expression in EGF-treated cells. Meanwhile, EGF-induced p300 stabilization was found to be involved in MMP-9 expression, whereas GA-AuNPs inhibited the EGF-promoted stability of the p300 protein. Although GA-AuNPs and gallic acid suppressed EGF-induced MMP-9 up-regulation via the same signaling pathway, the effective concentration of gallic acid was approximately 100-fold higher than that of GA-AuNPs for inhibition of MMP-9 expression in EGF-treated cells to a similar extent. Collectively, our data indicate that, in comparison with gallic acid, GA-AuNPs have a superior ability to inhibit EGF/EGFR-mediated MMP-9 expression in TNBC MDA-MB-231 cells. Our findings also point to a way to improve the anti-tumor activity of gallic acid. - Highlights: • Gallic acid-capped gold nanoparticles inhibit EGF-induced MMP-9 expression. • EGF-induced MMP-9 expression via p300 stabilization and NFκB/c-Jun activation. • Gallic acid-capped gold nanoparticles inhibit EGF-modulated p300 stabilization. • Gallic acid-capped gold nanoparticles abrogate EGF-induced NFκB/c-Jun activation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Site-Selective Doping and Oxidation State Control of Copper in Gold Nanorods

We report the synthesis of plasmonic gold–copper nanostructures with tunable copper spatial distribution and oxidation state. Au–Cu alloy shells were deposited in aqueous solution onto colloidal gold nanorods that functioned as seeds, and the resulting shell morphology was found to depend strongly on the nanorod aspect ratio. For relatively fat gold nanorods (16 x 31 nm), Au–Cu growth was preferentially localized near the rod midsections, forming belt-like structures, whereas for skinnier nanorods (9 x 32 nm), Au–Cu growth produced patchy surface coverage around the entire rod. The shell thickness was tuned from 1 to 4 nm; upon air exposure, thicker shells exhibited a higher Cu(I) fraction compared to the initial shell. Incorporation of the Au–Cu shell led to pronounced shifts in the plasmonic features of the gold nanorods. These tunable plasmonic Au–Cu nanorods provide a materials basis for Cu-based plasmonic materials in the context of electrochemical CO₂ reduction.

77 NANOSCIENCE AND NANOTECHNOLOGY↗