Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Functional coupling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

One-bond 13 C– 13 C spin-coupling constants in saccharides: a comparison of experimental and calculated values by density functional theory using solid-state 13 C NMR and X-ray crystallography

Methyl aldohexopyranosides were 13 C-labeled at contiguous carbons, crystallized, and studied by single-crystal X-ray crystallography and solid-state 13 C nuclear magnetic resonance (NMR) spectroscopy to examine the degree to which density functional theory (DFT) can calculate one-bond 13C–13C spin-coupling constants ( 1 J CC ) in saccharides with sufficient accuracy to permit their use in MA'AT analysis, a newly-reported hybrid DFT/NMR method that provides probability distributions of molecular torsion angles in solution (Zhang et al., J. Phys. Chem. B, 2017, 121, 3042–3058; Meredith et al., J. Chem. Inf. Model., 2022, 62, 3135–3141). Experimental 1 J CC values in crystalline samples of the doubly 13 C-labeled compounds were measured by solid-state 13 C NMR and compared to those calculated from five different DFT models: (1) 1 J CC values calculated from single structures identical to those observed in crystalline samples by X-ray crystallography (all atom refinement); (2) 1 J CC values calculated from the single structures in (1) but after Hirshfeld atom refinement (HAR); (3) 1 J CC values calculated from the single structures in (1) after DFT-optimization of hydrogen atoms only; and (4 and 5) 1 J CC values calculated in rotamers of torsion angle θ 2 (C1–C2–O2–O2H) or ω(C4–C5–C6–O6) from which either specific or generalized parameterized equations were obtained and used to calculate 1 J CC values in the specific θ 2 or ω rotamers observed in crystalline samples. Good qualitative agreement was observed between calculated 1 J CC values and those measured by solid-state 13 C NMR regardless of the DFT model, but in no cases were calculated 1 J CC values quantitative, differing (over-estimated) on average by 4–5% from experimental values. These findings, and those reported recently from solution NMR studies (Tetrault et al., J. Phys. Chem. B 2022, 126, 9506–9515), indicate that improvements in DFT calculations are needed before calculated 1 J CC values can be used directly as reliable constraints in MA'AT analyses of saccharides in solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Yu-Shiba-Rusinov States in a Superconductor with Topological Z 2 Bands

A Yu-Shiba-Rusinov (YSR) state is a localized in-gap state induced by a magnetic impurity in a superconductor. Recent experiments used an STM tip to manipulate the exchange coupling between an Fe adatom and the FeTe 0.55 Se 0.45 superconductor possessing a Z 2 nontrivial band structure with topological surface states. As the tip moves close to the single Fe adatom, the energy of the in-gap state modulates and exhibits a zero-energy crossing followed by an unusual return to zero energy, which cannot be understood by coupling the magnetic impurity to the superconducting topological surface Dirac cone. Here, we numerically and analytically study the YSR states in superconductors with nontrivial Z 2 bands and show the emergence of the two zero-energy crossings as a function of the exchange coupling between the magnetic impurity and the bulk states. We analyze the role of the topological surface states and compare in-gap states to systems with trivial Z 2 bands. The spin polarization of the YSR states is further studied for future experimental measurement.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nucleon Resonance Electroexcitation Amplitudes and Emergent Hadron Mass

Understanding the strong interaction dynamics that govern the emergence of hadron mass (EHM) represents a challenging open problem in the Standard Model. In this paper we describe new opportunities for gaining insight into EHM from results on nucleon resonance (N*) electroexcitation amplitudes (i.e., γvpN* electrocouplings) in the mass range up to 1.8 GeV for virtual photon four-momentum squared (i.e., photon virtualities Q2) up to 7.5 GeV2 available from exclusive meson electroproduction data acquired during the 6-GeV era of experiments at Jefferson Laboratory (JLab). These results, combined with achievements in the use of continuum Schwinger function methods (CSMs), offer new opportunities for charting the momentum dependence of the dressed quark mass from results on the Q2-evolution of the γvpN* electrocouplings. This mass function is one of the three pillars of EHM and its behavior expresses influences of the other two, viz. the running gluon mass and momentum-dependent effective charge. A successful description of the Δ(1232)3/2+ and N(1440)1/2+ electrocouplings has been achieved using CSMs with, in both cases, common momentum-dependent mass functions for the dressed quarks, for the gluons, and the same momentum-dependent strong coupling. The properties of these functions have been inferred from nonperturbative studies of QCD and confirmed, e.g., in the description of nucleon and pion elastic electromagnetic form factors. Parameter-free CSM predictions for the electrocouplings of the Δ(1600)3/2+ became available in 2019. The experimental results obtained in the first half of 2022 have confirmed the CSM predictions. We also discuss prospects for these studies during the 12-GeV era at JLab using the CLAS12 detector, with experiments that are currently in progress, and canvass the physics motivation for continued studies in this area with a possible increase of the JLab electron beam energy up to 22 GeV. Such an upgrade would finally enable mapping of the dressed quark mass over the full range of distances (i.e., quark momenta) where the dominant part of hadron mass and N* structure emerge in the transition from the strongly coupled to perturbative QCD regimes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Machine Learning-Based Identification of the Interface Regions for Coupling Local and Nonlocal Models

Local-nonlocal coupling approaches provide a means to combine the computational efficiency of local models and the accuracy of nonlocal models. However, the coupling process can be challenging, requiring expertise to identify the interface between local and nonlocal regions. Here, this study introduces a machine learning-based approach to automatically detect the regions in which the local and nonlocal models should be used. The method uses loading functions evaluated at grid points to decide the model selection at those points. Training of the networks is based on datasets provided by classes of loading functions for which reference coupling configurations are computed using accurate coupled solutions, where accuracy is measured in terms of the relative error between the solution to the coupling approach and the solution to the nonlocal model. We study two approaches that vary in data structure. The first, the full-domain input data approach, uses the entire load vector and outputs a complete label vector, performing a global classification. The second, a window-based approach, processes loads into windows and addresses the problem as a node-wise classification where each window's central point is classified individually. The classification problems are solved via deep learning algorithms based on convolutional neural networks. The performance of these approaches is studied on one-dimensional numerical examples using F1-scores and accuracy metrics. Notably, the windowing approach achieves an accuracy of 0.96 and an F1-score of 0.97, highlighting its potential to automate coupling processes effectively and enhance computational efficiency in material science applications.

97 MATHEMATICS AND COMPUTING↗

Coupling of Flavonoid Initiation Sites with Monolignols Studied by Density Functional Theory

Lignin recalcitrance presents a challenge for the development of a bioeconomy that employs lignocellulosic feedstocks. The efficiency of lignin deconstruction is improved by a reduction of molecular weight, and given the discovery that flavones serve as initiation sites in lignin biosynthesis, these molecular weight reductions could potentially be achieved with plant metabolic engineering to over-express flavonoids. Upon increasing the flavonoid content in lignin, the bond strengths and properties of flavonoid-monolignol linkages become increasingly important. To that end, the current work applies density functional theory calculations to elucidate the bond dissociation enthalpies (BDEs) of flavonoid-monolignol linkages, including dimers with oxidized monolignols. Specifically, the dimer bond strengths and monomer hydrogen abstraction energies for the flavonoids tricin, chrysoeriol, luteolin, apigenin, catechin, epicatechin, epigallocatechin, and epigallocatechin gallate are calculated, when coupled to seven natural and engineered monolignols. Results indicate that 4'-O-ß linkage strengths between flavonoids and monolignols are of comparable strength to inter-monolignol ß-O-4 linkages, with average flavonoid-monolignol BDEs of 70.7 kcal/mol relative to ~69.3 kcal/mol in analogous canonical monolignols. Epigallocatechin yielded the lowest 4'-O-ß bond strength of 52.3 kcal/mol when coupled to an oxidized monolignol, while the flavones overall produced lower average BDEs, relative to the flavanols. Substituents at the 3'-C and 5'-C positions on flavonoids affected the dimer linkage strengths to a greater extent than glycosylation or substituents further from the linkage. Erythro and threo stereochemistry across the flavonoid-monolignol linkage library exhibited only small energetic differences and no pronounced correlations. Taken together, the predictions from this work support the concept that higher concentrations of flavonoid initiation sites in lignin may afford linkage properties conducive to more facile lignin depolymerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synergy of Oxygen Vacancies and Base Sites for Transfer Hydrogenation of Nitroarenes on Ceria Nanorods

Abstract CeO 2 nanorod based catalysts for the base‐free synthesis of azoxy‐aromatics via transfer hydrogenation of nitroarenes with ethanol as hydrogen donor have been synthesized and investigated. The oxygen vacancies (O v ) and base sites are critical for their excellent catalytic properties. The O v , i.e., undercoordinated Ce cations, serve as the sites to activate ethanol and nitroarenes by lowering the energy barrier to transfer hydrogen from α−C sp3 −H in ethanol to the nitro group coupling it to the redox reactions between Ce 3+ and Ce 4+ . At the same time, the base sites catalyze the condensation step to selectively produce azoxy‐aromatics. The catalytic route opens a much improved way to use non‐noble metal oxides without additives for the selective functional group reduction and coupling reactions.

Yuan, Ziliang↗

Synergy of Oxygen Vacancies and Base Sites for Transfer Hydrogenation of Nitroarenes on Ceria Nanorods

CeO 2 nanorod based catalysts for the base-free synthesis of azoxy-aromatics via transfer hydrogenation of nitroarenes with ethanol as hydrogen donor have been synthesized and investigated. The oxygen vacancies (O v ) and base sites are critical for their excellent catalytic properties. The O v , i.e., undercoordinated Ce cations, serve as the sites to activate ethanol and nitroarenes by lowering the energy barrier to transfer hydrogen from α–C sp3 –H in ethanol to the nitro group coupling it to the redox reactions between Ce 3+ and Ce 4+ . At the same time, the base sites catalyze the condensation step to selectively produce azoxy-aromatics. Finally, the catalytic route opens a much improved way to use non-noble metal oxides without additives for the selective functional group reduction and coupling reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Relativistic two-component projection-based quantum embedding for open-shell systems

In this work, we present a relativistic quantum embedding formalism capable of variationally treating relativistic effects, including scalar-relativity and spin–orbit coupling. We extend density functional theory (DFT)-in-DFT projection-based quantum embedding to a relativistic two-component formalism, where the full spin magnetization vector form is retained throughout the embedding treatment. To benchmark various relativistic embedding schemes, spin–orbit splitting of the nominally t 2g valence manifold of W(CO) 6 , exchange coupling of [(H 3 N) 4 Cr(OH) 2 Cr(NH 3 ) 4 ] 4+ , and the dissociation potential curve of WF 6 are investigated. The relativistic embedding formalism introduced in this work is well suited for efficient modeling of open-shell systems containing late transition metal, lanthanide, and actinide molecular complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Wavelength conversion through plasmon-coupled surface states

Surface states generally degrade semiconductor device performance by raising the charge injection barrier height, introducing localized trap states, inducing surface leakage current, and altering the electric potential. We show that the giant built-in electric field created by the surface states can be harnessed to enable passive wavelength conversion without utilizing any nonlinear optical phenomena. Photo-excited surface plasmons are coupled to the surface states to generate an electron gas, which is routed to a nanoantenna array through the giant electric field created by the surface states. The induced current on the nanoantennas, which contains mixing product of different optical frequency components, generates radiation at the beat frequencies of the incident photons. We utilize the functionalities of plasmon-coupled surface states to demonstrate passive wavelength conversion of nanojoule optical pulses at a 1550 nm center wavelength to terahertz regime with efficiencies that exceed nonlinear optical methods by 4-orders of magnitude.

42 ENGINEERING↗

Monte Carlo simulation to study the effect of molecular spin state on the spatio-temporal evolution of equilibrium magnetic properties of magnetic tunnel junction based molecular spintronics devices

With a variable spin state, paramagnetic molecules can affect the impact of magnetic exchange coupling strength between two ferromagnetic electrodes. Our magnetic tunnel junction based molecular spintronics devices (MTJMSD) were successful in connecting paramagnetic single molecular magnet (SMM) between two ferromagnetic electrodes. Isolated SMM exhibited a wide range of spin states. However, it was extremely challenging to identify the SMM spin state when connected to the ferromagnetic electrodes. Our prior experimental and Monte Carlo Simulations (MCS) studies showed that paramagnetic molecules produced unprecedented strong antiferromagnetic coupling between two ferromagnets at room temperature. The overall antiferromagnetic coupling occurred when a paramagnetic SMM made antiferromagnetic coupling to the first electrode and ferromagnetic coupling to the second ferromagnetic electrode. This paper studies the impact of variable molecular spin states of the SMMs, producing strong antiferromagnetic coupling between the ferromagnetic electrodes of MTJMSD. The MTJMSD used in this study was represented by an 11 x 50 x 50 Ising model, with 11 being the thickness of the MTJMSD and 5 x 10 x 50 being each electrode’s size. We employed a continuous MCS algorithm to investigate SMM’s spin state’s impact as a function of molecular exchange coupling strength and thermal energy.

36 MATERIALS SCIENCE↗

Giant Wilson loops and AdS 2 /dCFT 1

The 1/2-BPS Wilson loop in N = 4 supersymmetric Yang-Mills theory is an important and well-studied example of conformal defect. In particular, much work has been done for the correlation functions of operator insertions on the Wilson loop in the fundamental representation. In this paper, we extend such analyses to Wilson loops in the large-rank symmetric and antisymmetric representations, which correspond to probe D3 and D5 branes with AdS 2 × S 2 and AdS 2 × S 4 worldvolume geometries, ending at the AdS 5 boundary along a one-dimensional contour. We first compute the correlation functions of protected scalar insertions from supersymmetric localization, and obtain a representation in terms of multiple integrals that are similar to the eigenvalue integrals of the random matrix, but with important differences. Using ideas from the Fermi Gas formalism and the Clustering method, we evaluate their large N limit exactly as a function of the ’t Hooft coupling. The results are given by simple integrals of polynomials that resemble the Q-functions of the Quantum Spectral Curve, with integration measures depending on the number of insertions. Next, we study the correlation functions of fluctuations on the probe D3 and D5 branes in AdS. We compute a selection of three- and four-point functions from perturbation theory on the D-branes, and show that they agree with the results of localization when restricted to supersymmetric kinematics. We also explain how the difference of the internal geometries of the D3 and D5 branes manifests itself in the localization computation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dynamic Simulation Modeling and Control of a Desiccant Assisted Direct-expansion Air Handling Unit

Desirable built environments demand simultaneous regulation of thermal comfort and indoor air quality (IAQ) with energy-efficient operation of heating, ventilation and air conditioning (HV AC) systems, which involves controls of temperature, humidity and airborne contaminants simultaneously. This paper presents the efforts of dynamic modeling and initial development control strategy for a desiccant-assisted multi-functional air handling unit (AHU) coupled with a direct-expansion rooftop unit (RTU) system, which aims to achieve multiple functions for indoor environment conditioning with energy efficient control. The RTU-AHU system includes a desiccant wheel for dehumidification and a conceptual direct air capture (DAC) filtering device for CO2 regulation. A Modelica-based dynamic model is developed for this conceptual system, and a simple decentralized control strategy is designed, which combines a differential-enthalpy based AHU return-air ratio control, a demand-controlled ventilation, and supply-air temperature humidity control via the RTU and DW controls. The proposed control method is evaluated with the Modelica simulation model for a selected set of scenarios

Pan, Chao↗

Interfacial Reactivity-Triggered Oscillatory Lattice Strains of Nanoalloys

Understanding the structure evolution of nanoalloys under reaction conditions is vital to the design of active and durable catalysts. Herein, we report an operando measurement of the dynamic lattice strains of dual-noble-metal alloyed with an earth-abundant metal as a model electrocatalyst in a working proton-exchange membrane fuel cell using synchrotron high-energy X-ray diffraction coupled with pair distribution function analysis. Additionally, the results reveal an interfacial reaction-triggered oscillatory lattice strain in the alloy nanoparticles upon surface dealloying. Analysis of the lattice strains with an apparent oscillatory irregularity in terms of frequency and amplitude using time-frequency domain transformation and theoretical calculation reveals its origin from a metal atom vacancy diffusion pathway to facilitate realloying upon dealloying. This process, coupled with surface metal partial oxidation, constitutes a key factor for the nanoalloy's durability under the electrocatalytic oxygen reduction reaction condition, which serves as a new guiding principle for engineering durable or self-healable electrocatalysts for sustainable fuel cell energy conversion.

Wu, Zhi-Peng [State University of New York (SUNY),↗

Quantum simulation of an extended Dicke model with a magnetic solid

Abstract The Dicke model describes the cooperative interaction of an ensemble of two-level atoms with a single-mode photonic field and exhibits a quantum phase transition as a function of light–matter coupling strength. Extending this model by incorporating short-range atom–atom interactions makes the problem intractable but is expected to produce new physical phenomena and phases. Here, we simulate such an extended Dicke model using a crystal of ErFeO 3 , where the role of atoms (photons) is played by Er 3+ spins (Fe 3+ magnons). Through terahertz spectroscopy and magnetocaloric effect measurements as a function of temperature and magnetic field, we demonstrated the existence of a novel atomically ordered phase in addition to the superradiant and normal phases that are expected from the standard Dicke model. Further, we elucidated the nature of the phase boundaries in the temperature–magnetic-field phase diagram, identifying both first-order and second-order phase transitions. These results lay the foundation for studying multiatomic quantum optics models using well-characterized many-body solid-state systems.

Marquez Peraca, Nicolas↗

Topological flat bands in frustrated kagome lattice CoSn

Electronic flat bands in momentum space, arising from strong localization of electrons in real space, are an ideal stage to realize strongly-correlated phenomena. Theoretically, the flat bands can naturally arise in certain geometrically frustrated lattices, often with nontrivial topology if combined with spin-orbit coupling. Here, we report the observation of topological flat bands in frustrated kagome metal CoSn, using angle-resolved photoemission spectroscopy and band structure calculations. Throughout the entire Brillouin zone, the bandwidth of the flat band is suppressed by an order of magnitude compared to the Dirac bands originating from the same orbitals. The frustration-driven nature of the flat band is directly confirmed by the chiral d-orbital texture of the corresponding real-space Wannier functions. Spin-orbit coupling opens a large gap of 80 meV at the quadratic touching point between the Dirac and flat bands, endowing a nonzero Z2 invariant to the flat band. These findings demonstrate that kagome-derived flat bands are a promising platform for novel emergent phases of matter at the confluence of strong correlation and topology.

36 MATERIALS SCIENCE↗

Revisiting two thiophosphate compounds constituting d 0 transition metal HfP 2 S 6 and d 10 transition metal α-Ag 4 P 2 S 6 as multifunctional materials for combining second harmonic generation response and photocurrent response

Two acentric thiophosphate compounds, HfP 2 S 6 and α-Ag 4 P 2 S 6 , are revisited and studied as infrared nonlinear optical materials. HfP 2 S 6 and α-Ag 4 P 2 S 6 were structurally characterized without any property measurements. Here, in this work, HfP 2 S 6 and α-Ag 4 P 2 S 6 were synthesized via high temperature salt flux reactions. Low-temperature polymorph acentric α-Ag 4 P 2 S 6 was purified and grown as mm-sized crystals with the aid of AgBr flux. The AgBr flux was revealed to play an important role in stabilizing the acentric α-Ag 4 P 2 S 6 . The acentric α-Ag 4 P 2 S 6 transforms to centrosymmetric β-Ag 4 P 2 S 6 at 850(5) K, which is revealed by differential scanning calorimetry (DSC) analysis and powder X-ray diffraction experiments. HfP 2 S 6 and α-Ag 4 P 2 S 6 are discovered by UV-vis spectrum measurements as indirect bandgap semiconductors with bandgaps of 2.2(1) eV and 2.5(1) eV, respectively, which is supported by DFT calculations and TB-LMTO-ASA calculations. The bonding pictures of α-Ag 4 P 2 S 6 were studied by crystal orbital Hamilton population calculations (COHP) coupled with electron localization function (ELF) analysis. DFT calculations predict that HfP 2 S 6 and α-Ag 4 P 2 S 6 would exhibit different optical performances regardless of being constructed from identical [P 2 S 6 ] motifs. HfP 2 S 6 exhibits a low second harmonic generation (SHG) response, ~0.21 × AGS (for the sample of particle size of 25 μm). α-Ag 4 P 2 S 6 possesses moderate SHG response, ~0.61 × AGS (for the sample of particle size of 225 μm) coupled with a high laser damage threshold (LDT) of ~3.2 × AGS. Characteristics of high ambient stability, moderate bandgap and SHG response, type-I phase-matching capability, and high LDT together with the easy growth of large crystals make α-Ag 4 P 2 S 6 attractive for future infrared nonlinear optical applications. Photocurrent measurements found that α-Ag 4 P 2 S 6 and β-Ag 4 P 2 S 6 have high photocurrent response, 165 nA cm -2 and 135 nA cm -2 , respectively. α-Ag 4 P 2 S 6 is a new multifunctional material of the ternary Ag–P–S system, which combines nonlinear optical (NLO) properties and photocurrent response.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Editors’ Choice—Natural Convection Boundary Layer Thickness at Elevated Chloride Concentrations and Temperatures and the Effects on a Galvanic Couple

The natural convection boundary layer ( δ n c ) and its influence on cathodic current in a galvanic couple under varying electrolytes as a function of concentration (1 − 5.3 M NaCl) and temperature (25 °C−45 °C) were understood. Polarization scans were obtained under quiescent conditions and at defined boundary layer thicknesses using a rotating disk electrode on platinum and stainless steel 304L (SS304L); these were combined to determine δ n c . With increasing chloride concentration and temperature, δ n c decreased. Increased mass transport (Sherwood number) results in a decrease in δ n c , providing a means to predict this important boundary. Using Finite Element Modeling, the cathodic current was calculated for an aluminum alloy/SS304L galvanic couple as a function of water layer ( WL ) thickness and cathode length. Electrolyte domains were delineated, describing (i) dominance of ohmic resistance over mass transport under thin WL , (ii) the transition from thin film to bulk conditions at δ n c , and (iii) dominance of mass transport under thick WL . With increasing chloride concentration, cathodic current decreased due to decreases in mass transport. With increasing temperature, increased cathodic current was related to increases in mass transport and solution conductivity. This study has implications for sample sizing and corrosion prediction under changing environments.

25 ENERGY STORAGE↗

Spacecraft surface charging as a function of material properties

Spacecraft material behavior plays a very important role in space missions. Spacecraft immersed in plasma get charged by absorbing plasma particles and by emitting electrons from spacecraft surfaces via photoelectron and secondary electron emission. Spacecraft charging depends heavily on material properties such as work function, secondary electron yield, dielectric constant, and electric conductivity among other. Material properties are typically assumed to be static in charging models. However, it is well known that this is not the case in space. This makes spacecraft charging predictions very challenging. Material properties are well characterized before the spacecraft is put in orbit through characterization in the lab under clean conditions. However, once in space, material properties change due to the harsh and very dynamic space environment. We present a new capability to predict material behavior in space from first-principles modeling. The ongoing effort seeks to couple material models, density functional theory (DFT) and molecular dynamic (MD) codes, with environment models, plasma kinetic codes. This preliminary study will show results of surface charging as a function of material work function, dielectric constant, and conductivity.

36 MATERIALS SCIENCE↗