Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fuel additive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Understanding how single-atom site density drives the performance and durability of PGM-free Fe–N–C cathodes in anion exchange membrane fuel cells

One of the most important needs for the future of low-cost fuel cells is the development of highly active platinum group metal (PGM)-free catalysts. For the oxygen reduction reaction, Fe–N–C materials have been widely studied in both acid and alkaline media. However, reported catalysts in the literature show quite different intrinsic activity and in-cell performance, despite similar synthesis routes and precursors. Here, two types of Fe–N–C are prepared from the same precursor and procedure – the main difference is how the precursor was handled prior to use. It is shown that in one case Fe overwhelmingly existed as highly active single-metal atoms in FeN4 coordination (preferred), while in the other case large Fe particles coexisting with few single metal atoms were obtained. As a result, there were drastic differences in the catalyst structure, activity, and especially in their performance in an operating anion exchange membrane fuel cell (AEMFC). Additionally, it is shown that catalyst layers created from single-atom-dominated Fe–N–C can have excellent performance and durability in an AEMFC using H 2 /O 2 reacting gases, achieving a peak power density of 1.8 W cm -2 – comparable to similar AEMFCs with a Pt/C cathode – and being able to operate stably for more than 100 h. Finally, the Fe–N–C cathode was paired with a low-loading PtRu/C anode electrode to create AEMFCs (on H 2 /O 2 ) with a total PGM loading of only 0.135 mg cm -2 (0.090 mg Pt cm -2 ) that was able to achieve a very high specific power of 8.4 W mg PGM -1 (12.6 W mg Pt< sup>-1 ).

36 MATERIALS SCIENCE↗
DOE OSTI2025

A method for assessing economic, environmental, and reliability tradeoffs of interregional transmission connecting ERCOT (the Texas grid) to the eastern and western grids

Reliable development of the power grid is an evolving concern for humanity due to extreme weather that frequently threatens power sector infrastructure. The state of Texas is a uniquely structured testbed for grid planners to study when looking for solutions to development, innovation, and overcoming such challenges. Because of its size and islanded structure, Texas is small enough to model, but big enough to matter. Texas is a global leader in energy production, energy consumption, and maintains an unusually diverse fuel mix. In addition, the state has experienced winter freezes, heat waves, wind storms, droughts and floods that have threatened power sector infrastructure or caused recent blackouts and calls for demand side conservation. One of the most devastating of these events was the North American winter storm, dubbed “Winter Storm Uri” by the Weather Channel, that froze the region in February 2021 and led to an extended power outage event that put the majority of Texan residents in darkness for days. While preparing to avoid such outage events in the future, various tools have been proposed to improve grid reliability, including energy efficiency, demand response, and distributed energy resources. An additional option would be to develop interregional transmission that connects the Texas grid to other national grids. To assess the merits of this idea, we developed a novel, universally-applicable and internationally-relevant framework to study how the Texas grid would evolve alongside access to various interregional ties. This method allows us to stress the synthetic grid structure and analyze how it would respond to the shock of a simulated winter storm event. Our method leverages open-source modeling tools, such as PowerGenome, pyGRETA, and GenX to synthesize unique zonal grid data, construct a consolidated network of model regions, and simulate different developmental pathways of capacity expansion and operational dispatch. We demonstrate our method with an analysis connecting the Electric Reliability Council of Texas (ERCOT), the grid that serves most of Texas, the Western Electricity Coordinating Council (WECC), the grid that serves the western half of the contiguous U.S., and the Eastern Interconnect, the grid that serves the eastern half of the contiguous U.S. Our results indicate that the cost-optimal capacity of interregional transmission connecting the ERCOT grid to other grids lies between 9–13 GW assuming baseline conditions. Building this amount of connecting capacity in one or multiple directions lowers the costs and emissions of development and operation by up to $16 billion and 257 million metric tonnes (MMT) respectively. Additionally, our results show that the interregional connections between ERCOT and other national grids reduce the amount of total load shed required through mild winter storm events. However, our results also show that there is a threshold of very extreme winter storm conditions, spanning multiple service areas, above which the connections exacerbate resource adequacy problems. Therefore, the results indicate that the connections need to be carefully planned alongside the rest of the grid infrastructure to avoid over-reliance on specific resources or technology options.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Nuclear waste Educator's workshop: What and how do we teach about nuclear waste?

A workshop was held at the Massachusetts Institute of Technology (MIT) on July 25th and 26th, 2022. The objective was to develop a blueprint for educating next-generation engineers and scientists about nuclear waste management and disposal, which requires knowledge from diverse disciplines, including nuclear, chemical, civil, environmental, and geological science and engineering. The 49 participants included university professors, researchers, industry experts, and government officials from different areas. First, we have developed a list of key fundamental knowledge on waste management and disposal across the nuclear fuel cycle. In addition, we discussed strategies on how to teach students with diverse backgrounds through innovative teaching strategies as well as how to attract students into this area. Through the workshop, we identified the critical needs to (1) develop community resources for nuclear waste education; (2) synthesize historical perspectives, including past contamination and the management of general hazardous waste; (3) emphasize a complete life-cycle perspective, including proper waste management as the key component for energy sustainability; (4) teach students how to communicate about the key facts and risks to technical and non-technical audiences; and (5) accelerate the use of the state-of-art-technologies to attract and retain a young workforce. Furthermore, we aim to build a diverse, inclusive community that supports students in developing their own narratives about nuclear waste, particularly in recognizing that antagonistic views have been important to improving safety and protecting public health and the environment.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Investigation of Electron Extraction and Protection Layers on Cu 2 O Photocathodes

Many semiconductor photoelectrodes used for solar fuel production require the addition of buffer and protection layers to enhance their solar-to-fuel conversion efficiency and long-term stability. For example, Cu 2 O, which is the most efficient oxide-based photocathode but suffers from photocorrosion, has been assembled with various buffer and protection layers to suppress photocorrosion and use more photoexcited electrons for useful reactions such as water reduction to H 2 . However, the abilities of various buffer and protection layers to extract electrons from Cu 2 O have never been directly evaluated. Instead, their abilities were estimated based on the photocurrent for water reduction after adding a hydrogen evolution catalyst on top of them. In these evaluations, as the photocurrent is affected not only by the buffer or protection layer but also by the catalyst, the ability of the buffer or protection layer to extract electrons from Cu 2 O could not be accurately determined or compared. Here, in this study, we demonstrate that 4-hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPOL), whose reduction rate is faster than the photocorrosion rate of Cu 2 O, can be used as an effective electron scavenger to directly evaluate any change caused by a buffer or protection layer in electron-hole separation in Cu 2 O. In particular, we compared the performances of ZnO and TiO 2 layers on Cu 2 O for extracting electrons and suppressing photocorrosion. We also compared the performances of TiO 2 layers prepared by electrodeposition and atomic layer deposition (ALD) to show that the deposition method can make a striking impact on the performance of the same TiO 2 because it can affect the critical characteristics of the layer (e.g., defect levels, conductivity, interfacial atomic arrangements) that govern interfacial charge transfer in multilayer photoelectrodes.

36 MATERIALS SCIENCE↗
DOE OSTI2025

ThO 2 and Th 1– x U x O 2 Nanoscale Materials and Thin Films for Nuclear Science Applications

This study investigates the dynamics and mechanisms of solution combustion synthesis (SCS) for the preparation of nanoscale ThO 2 and Th 1–x U x O 2 materials, utilizing metal nitrates (Th(NO 3 ) 4 and UO 2 (NO 3 ) 2 ) and acetylacetone (C 5 H 8 O 2 ) as reactants dissolved in a 2-methoxyethanol (C 3 H 8 O 2 ) solvent. By combining thermodynamic calculations, dynamic time–temperature profile measurements with differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), this research reveals how variations in acetylacetone concentration and uranium content influence the structural parameters of the synthesized oxides. The time–temperature measurements show that the heating rate and maximum combustion temperatures are sensitive to acetylacetone concentration. DSC-TGA results indicate shifts in exothermic peak temperatures as the uranium content changes. The complexation between thorium and acetylacetone emerges as a critical factor, impacting combustion parameters and the structural characteristics of the final products. The uniform distribution of Th and U in the Th 1–x U x O 2 solid solution and the formation of nanoscale particles with strained crystallites are considered essential for the low-temperature densification of these materials for nuclear fuel pellet applications. Additionally, high-quality ThO 2 and Th 1–x U x O 2 thin (100–150 nm) films are successfully synthesized via electrospray deposition of combustible solutions followed by a brief period of heat treatment. Furthermore, these films exhibit excellent structural and morphological uniformity, making them ideal candidates for nuclear measurements, irradiation damage studies, and investigations into the physical properties of both pure and mixed oxides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A High-Fidelity Modeling Tool to Support the Design of Oxy-Combustors for Direct-Fired Supercritical CO2 Cycles

The challenge in the design of oxy-combustors for direct-fired supercritical CO 2 (sCO 2 ) cycles is in addressing disparate performance metrics and objectives. Key design parameters to consider include, among others, injector design for mixing and flame stability, split of recycled CO 2 diluent between injectors and cooling films, target flame temperatures to control noncondensable products, and strategies to inject the diluent CO 2 for film cooling and thermal control. In order to support novel oxy-combustor designs, a high-fidelity yet numerically efficient modeling framework based on the CRUNCH CFD® flow solver is presented, featuring key physics-based submodels relevant in this regime. For computational efficiency in modeling large kinetic sets, a flamelet/progress variable (FPV) based tabulated-chemistry approach is utilized featuring a three-stream extension to allow for the simulation of the CO 2 film cooling stream in addition to the fuel and oxidizer streams. Finite rate chemistry effects are modeled in terms of multiple progress variables for the primary flame as well as for slower-evolving chemical species such as NO x and SO x contaminants. Real fluid effects are modeled using advanced equations of states. The predictive capabilities of this computationally tractable design support tool are demonstrated on a conceptual injector design for an oxy-combustor operating near 30 MPa. Simulations results provide quantitative feedback on the effectiveness of the film cooling as well as the level of contaminants (CO, NO, and N) in the exhaust due to impurities entering from the injectors. These results indicate that this framework would be a useful tool for refining and optimizing the oxy-combustor designs as well as risk mitigation analyses.

Engineering↗
DOE OSTI2021

Evaluating Diesel/Biofuel Blends Using Artificial Neural Networks and Linear/Nonlinear Equations

Abstract The use of biomass-derived additives in diesel fuel mixtures has the potential to increase the fuel’s efficiency, decrease the formation of particulate matter during its combustion, and retain the fuel’s behavior in cold weather. To this end, identifying compounds that enable these behaviors is paramount. The present work utilizes a series of linear and non-linear equations in series with artificial neural networks to predict the cetane number, yield sooting index, kinematic viscosity, cloud point, and lower heating value of multi-component blends. Property values of pure components are predicted using artificial neural networks trained with existing experimental data, and these predictions and their expected errors are propagated through linear and non-linear equations to obtain property predictions for multi-component blends. Individual component property prediction errors, defined by blind prediction median absolute error, are 4.91 units, 7.84 units, 0.06 cSt, 4.00 °C, and 0.55 MJ/kg for cetane number, yield sooting index, kinematic viscosity, cloud point, and lower heating value respectively. On average, property predictions for blends are shown to be accurate to within 6% of the blends’ experimental values. Further, a multitude of compounds expected to be produced from catalytically upgrading products of fast pyrolysis are evaluated with respect to their behavior in diesel fuel blends.

09 BIOMASS FUELS↗
DOE OSTI2020

Demonstration of μCHP in Light Commercial Hot Water Applications

Internal combustion engine driven combined heat and power (CHP) systems produce power while the waste heat is recovered and used for another purpose. For µCHP systems (less than 50kWe output) overall efficiencies can reach over 90% for products currently on the market throughout the world. On a fuel basis this offers an advantage over using grid-based power and another fuel for heat. Additionally, the cost of natural gas on an energy unit basis is significantly less expensive than electric power. This difference can lead to substantial savings for the end user of a CHP system. In some parts of the world, particularly Germany and Japan, µCHP has become a common part of the heat and distributed generation equipment mix. Market analysis conducted in 2012 showed that in North America there is potential of a 5,300 units per year market for µCHP, resulting in an annual energy savings of approximately 13.5 TBtu and more than $84 million in annual customer savings. However, µCHP still has not seen much market penetration in North America. This study helps to identify some of the reasons why, address roadblocks that still need to be overcome and provide experience to established best practices. Nine commercial sites were initially identified (fitness club, surgical center, senior community, resort and spa, commercial laundry, two multi-family housing, restaurant and manufacturing facility). Systems from two different manufacturers were installed at five sites total, but due to unforeseen circumstances, only three of those sites were finally commissioned: test data were collected by Oak Ridge National Laboratory. While not all systems were installed as intended, the project resulted in the following key findings: Micro combined heat and power is an unfamiliar technology for building owners and plumbing and electrical contractors that serve the buildings most suited for µCHP. Manufacturers will need to be aggressive in providing training and providing broad support to successfully bring the technology to market.; The proper integration of µCHP into other building systems is the most critical part of a successful installation. Manufacturers will need to be able to provide the expertise to train, advise and support the mechanical contractors during the design and installation of the heat integration system.; Regulations governing µCHP varies across the country. There are a few UL standards (UL 2200 and UL 1741) that apply nationally. Emissions are governed by EPA except in California where the California Air Resources Board (CARB) has established their own standard. Requirements that dictate installation and interconnection are dependent on local building codes and local utility processes and requirements. Some out of date building codes do not offer clear guidance for these requirements, leading to confusion. This makes developing training and determining broadly applicable best practices difficult.; Installation costs of µCHP are a key factor in making an installation successful. It is critical that these costs and all national, state and local regulations be understood and accounted for by all parties involved in the installation before a project is undertaken.; A robust customer service organization is important to meet the needs of the customers. These systems require annual maintenance and service and local capability is needed to keep costs inline.

03 NATURAL GAS↗
DOE OSTI2023

The Prospects for Pumped Storage Hydropower in Alaska

Key Takeaways: The resource mapping analysis confirmed that numerous locations in Alaska are suitable for the development of pumped storage hydropower (PSH) projects, both larger grid scale projects and smaller projects that could be suitable for remote communities; The resource assessment for larger, grid-scale projects showed the potential for more than 1,800 closed-loop systems in Alaska, with a total energy storage capacity of about 4 terawatt hours (TWh); Because of their small reservoir sizes and dam heights, many locations were identified as potentially suitable for small-scale PSH systems. Nearly 50% of the identified potentially suitable small-scale PSH sites are in Southeast Alaska; PSH candidate sites were part of the optimal capacity expansion solution in all scenarios analyzed for the Railbelt system. Depending on the scenario, the new PSH capacity that the model selected for the analysis period until 2046 ranged from 300 MW to 600 MW. The locations and timing of new PSH investments vary in different scenarios; Lithium-ion batteries were also selected a source of new generating capacity in all analyzed scenarios for the Railbelt system, indicating that the system will need a mix of short- and long-duration energy storage to support variable renewable energy sources and provide system reliability in the future; For rural communities, analysis results showed that PSH suitability is very site-specific; in addition to diesel fuel costs and PSH capital costs, suitability depends heavily on available renewable resources and existing infrastructure (e.g., reservoirs, transmission access and construction road access); The analysis for rural communities also showed that PSH projects with 10-hour energy storage are likely to be more economical for remote community applications in Alaska than those with larger reservoirs that could provide 10 days of energy storage; Lithium-ion batteries seem to be an economically more viable energy storage option for small, remote communities in Alaska.

13 HYDRO ENERGY↗
DOE OSTI2023

PRO-X Research Reactor Database Status

The PRO-X Research Reactor Database is a functioning tool that can be used to quickly view attributes of past, current, and future research reactors. It contains all data found in the IAEA Research Reactor Database and entries generated from the M3 fuel conversion program. Additionally, it can be downloaded to any computer with the ability to run Microsoft ACCESS. Several research reactor attributes visible to the user have a limited amount of information, much of which is available and vetted for entry into the database. However, the necessary resources have not been allocated to add this information to the data tables. A change management system has also been developed to track changes to the database. This would need to be incorporated into the database program prior to data table modification in order to ensure proper management of the changes.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Conceptual Model Testing Related to SDU 6 Drainwell Observations

From its inception in the early 1950s through the end of the Cold War in the early 1990s, the Savannah River Site (SRS) produced nuclear materials for national defense in five reactors. Additionally, irradiated reactor fuel and target tubes were dissolved in nitric acid to recover plutonium and uranium using the PUREX (Plutonium Uranium Reduction EXtraction) process. Liquid waste from these chemical separations processes was then stored onsite in 51 underground tanks. Eight waste storage tanks have been operationally closed (i.e. cleaned and grouted) and the remaining tanks hold a mixture of liquids, insoluble solids, and precipitated salts (SRMC-LWP-2022-00001), the latter generated by evaporating water from the liquid waste. Waste is currently being retrieved from tanks and separated into 1) high-radioactivity, low-volume, and 2) low-radioactivity, high-volume components, principally through the Salt Waste Processing Facility (SWPF) (SRMC-LWP-2023-00001). The former waste stream is vitrified in the Defense Waste Processing Facility (DWPF), stored onsite, and destined for offsite disposal in a deep geologic repository. The latter stream is mixed with dry cementitious materials in the Saltstone Production Facility (SPF) and the wet slurry placed in onsite Saltstone Disposal Units (SDUs) within the Saltstone Disposal Facility (SDF), where it hardens into a cement waste form termed saltstone. A low-infiltration surface cover system will be placed over the SDF at closure, where SDUs will then be in the subsurface post-closure (SRR-CWDA-2019-00001).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Combustion synthesis of nanoscale magnesium borides with improved hydrogen uptake and release

The overarching goal of the reported project was to develop reversible metal hydrides that can be dehydrogenated and recharged at relatively low temperatures and pressures. The project complemented the research on reversible metal hydrides for hydrogen storage conducted by the Hydrogen Materials – Advanced Research Consortium (HyMARC). The students involved were trained at both the University of Texas at El Paso (UTEP) and Sandia National Laboratories (SNL). The research objectives were to fabricate nanoscale magnesium boride powders with different B/Mg atomic ratios and to investigate the effects of B/Mg ratio and particle size on the hydrogenation properties of the obtained materials. Magnesium diboride (MgB 2 ) and tetraboride (MgB 4 ) were synthesized by using combustion synthesis and by heating in a tube furnace. The latter method resulted in materials with significantly reduced impurity levels. An effective method for the removal of magnesium oxide impurities was identified. High-energy ball milling produced submicron MgB 2 and MgB 4 powders. However, hydrogenation experiments at pressures up to 700 bar have not shown any uptake of hydrogen. Thermogravimetric analysis of the decomposition of the obtained MgB 2 and MgB 4 demonstrated higher thermodynamic stability of the latter. Thus, the boron-rich nature and phase stability of magnesium borides with high B/Mg ratios make them poor candidates for direct hydrogenation. However, the synthesized MgB 4 is a promising energetic additive to solid fuels for high-speed air-breathing propulsion as it offers a lower oxidation onset temperature and greater energy density than MgB 2 .

08 HYDROGEN↗
DOE OSTI2025

Mapping the Outcomes of Stellar Evolution in the Disks of Active Galactic Nuclei

The disks of active galactic nuclei (AGNs) are expected to be populated by numerous stars, either formed in the outer regions of the disk via gravitational instability or captured from the nearby nuclear star cluster. Regardless of their formation mechanism, these stars experience altered evolutionary paths, mostly shaped by the accretion of dense disk material. In this study, through the comparison of different timescales, we chart the evolutionary outcomes of these AGN stars as a function of disk radius and across a range of supermassive black hole masses, spanning from 10 6 to 10 9 M ⊙ , for two popular AGN disk models. We find that in the outer regions of the disk, stars evolve similarly to those in the interstellar medium, but in the inner and denser regions, accretion quickly turns low-mass stars into massive stars, and their fate depends on just how quickly they accrete. If accretion occurs at a faster rate than nuclear burning, they can reach a quasi-steady "immortal" state. If stars accrete faster than they can thermally adjust, runaway accretion occurs, potentially preventing a quasi-steady state and altering the disk structure. During the AGN lifetime, in the regions of the disk that produce massive stars, supernovae (SNe) and gamma-ray bursts (GRBs) may occur within the disk over a wide range of optical depths and ambient densities. Subsequently, in the final phase of the AGN, as the disk becomes depleted, formerly immortal stars will be unable to replenish their fuel, leading to additional SNe and GRBs.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Impact of Lateral Alignment for Cooling Airflow during Heavy-Truck Platooning

A truck platooning system was tested using two heavy-duty tractor-trailer trucks on a closed test track to investigate the thermal control/heat rejection system sensitivity to intentional lateral offsets over a range of intervehicle spacings. Previous studies have shown the following vehicle can experience elevated temperatures and reduced airflow through the cooling package as a result of close-formation platooning. Four anemometers positioned across the grille of the following trucks as well as aligned and multiple offset positions are used to evaluate the sensitivity of the impact. Straight sections of the track are isolated for the most accurate airflow impact measurements and to be most representative of on-highway driving. An intentional lateral offset in truck platooning is considered as a controls approach to mitigate reduced cooling efficacy at close following scenarios where the highest platoon savings are achieved. The truck platooning system was tested at four gap distances from 9 to 23 meters and the following truck was either aligned with the lead or offset with a 25% width (0.65 m) or 50% width (1.3 m) lateral distance. The experimental results clearly show that offset driving is effective at bringing cooling airflow from 56% with an aligned platoon back up to 75%-80% with minimal impact to fuel savings. In addition, the offset driving can also reduce the trailing truck’s engine coolant temperature by 2°C and the corresponding underhood temperature rise by 10°C. The test outcomes indicate a plausible controls strategy to mitigate reduced cooling flow during hot-weather truck platooning while still enabling the highest-energy-saving, close-following scenarios.

27 ARPA - Advanced Research Projects Agency-Energy↗
DOE OSTI2024

Impact of polymer additives on crack mitigation of rod-coated fuel cell cathode catalyst layers

Cracks in catalyst layers (CLs) are a potential source of long-term failure in a fuel cell membrane electrode assembly (MEA). While modifications to the CL ink formulation can affect the degree of cracking, these changes may lead to lower initial performance than their cracked analogues due to the established link between formulation and performance. In this work, we explored the use of polymeric additives to mitigate CL cracks. Small quantities of poly (acrylic acid), poly (ethylene oxide), poly (methyl methacrylate), or poly (vinyl alcohol) - 5 wt% relative to ionomer mass - were added to the ink prior to its final mixing. Poly (vinyl alcohol) resulted in crack-free CLs, whereas the other polymers resulted in CLs with similar crack percentages as the control CL. Through a combination of transmission electron microscopy, X-ray computed tomography, and infrared spectroscopy, we ascribed the crack-mitigating mechanism of poly (vinyl alcohol) to its ability to hydrogen-bond with Nafion, the ion conducting polymer binder in the catalyst ink. Initial performance of this non-cracked electrode exhibited nearly identical electrochemical behavior to its cracked counterpart, demonstrating that PVA additives successfully reduce cracks while maintaining cell initial performance.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

ADDITIVE MANUFACTURING AND REGULATORY TESTING OF CANISTERS FOR SPENT NUCLEAR FUEL MANAGEMENT

The back end of the fuel cycle focuses on the interim storage, transportation, and final disposition of the spent nuclear fuel from nuclear reactors. Commercial light water nuclear power stations across the United States operate with fuel assemblies being irradiated for up to 6 years (planned) in the reactor pressure vessel. After their planned irradiation, the fuel assemblies are moved to a spent fuel pool within the facility complex. After the spent nuclear fuel is removed from the fuel pool, it is typically inserted into a welded metal canister that can be transferred between overpacks for storage, transportation and possibly disposal. Most dry storage systems being used by industry today use dual purpose canisters (DPCs), designed for use in storage and transportation overpacks, but not specifically designed for disposal. Triple purpose-canisters, designed for disposal in addition to storage and transportation, have also been researched. Traditional manufacturing methods for spent fuel canisters involve fusion welding along the length or circumference of the canister which results in high tensile residual stresses in the joint weld zone (WZ) and heat affected zone (HAZ). In this paper, spent fuel canister designs were printed by wire arc additive manufacturing (AM) using the 316L SS welding wire to demonstrate: 1. Feasibility of spent nuclear fuel canister fabrication using this advanced manufacturing method, 2. Dynamic response of the additive manufacture canister design when subjected to the federally mandated Normal Conditions of Transport (NCT) and Hypothetical Accident Conditions (HAC) physical tests for Type B packages. This paper will focus on the canister printing design and structural tests. The AM 3D printed design, regulatory testing, and post-test evaluation of the canister tested to the 10 CFR 71.71 and 10 CFR 71.73 requirements will be presented. One AM canister design was subjected to the penetration, free drop, and puncture test. Before and after the dynamic structural tests, the AM canister design was scanned with a handheld scanner to capture a 3D CAD geometry to compare to the 3D printed canister design in the deformed shape. The scanned geometry was sectioned in areas with deformation and the cross-section profile was measured to determine accurate and repeated results of the deformed shape of the AM canister design.

Martinez, Oscar↗
DOE OSTI2021

Anaerobic Digestion Implementation at Dairies in Colorado

Anaerobic digestion (AD) of animal manure to produce biogas (methane) fuel has a wide variety of environmental benefits to air and water quality in addition to reducing greenhouse gas (GHG) emissions. In addition, the resulting biogas fuel and digestate products can help meet the energy needs and provide revenue to the farm. This case study explores the potential benefits and drawbacks of implementing an AD system at the Aurora Organic Dairy (AOD) High Plains Complex in Gill, Colorado. The project is envisioned as digester located at the AOD Complex with a single feed stream of manure from the Complex. The project would be implemented by a third-party contractor who would build and operate the system and pay the dairy a fraction of the profits, in addition to providing by-products such as digestate solids and liquids for fertilizer.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Perspectives on the FESAC transformative enabling capabilities: Priorities, plans, and Status

In early 2017, the Fusion Energy Sciences Advisory Committee (FESAC), an advisory committee to the United States Department of Energy, was charged with identifying transformative enabling capabilities (TECs) “that could promote efficient advance toward fusion energy, building on burning plasma science and technology.” A subcommittee with broad expertise was formed and sought feedback from scientific experts, including experts from outside the fusion community. Three workshops were conducted, and a report was approved by FESAC in 2018 that identified four of the “most promising” TECs: advanced algorithms, high-critical-temperature superconductors, advanced materials and manufacturing, and novel technologies for tritium fuel cycle control. In addition, one “promising” TEC was identified: fast flowing liquid metal plasma-facing components. This paper will give details on the promising TECs and an overview on considerations of these TECs in the United States since the publication of the report.

Lumsdaine, Arnold↗