Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FERRITE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Microstructural Development and Mechanical Properties of Friction Stir Welded Ferritic Stainless Steel AISI 409

This work investigates the effect of friction stir welding process parameters (rotation rate and traverse speed) on the microstructural evolution of friction stir welded (FSWed) ferritic stainless steel (FSS) AISI 409. Optical microscope, scanning electron microscope and electron backscattering diffraction are used to quantitatively assess the development in grain structure and texture. The microstructural development suggested that thermo-mechanical deformation occurs in the stir zone within the austenite/ferrite phase region, ultimately transforming upon cooling into bainitic/ferritic microstructure. The fraction and size of the bainitic/ferritic grains are found to vary through the thickness of the joints. High fractions of coarse ferritic grains are found near the top of the stir zone, and low fraction of fine ferritic grains is found near the bottom of the stir zone. This bainitic/ferritic grain structure resulted in an increase in the hardness of the stir zone by about 74% relative to the base material. The tensile strength of the FSWed FSS joints is almost at the same level of the base material with reduction in the ductility as a result of the increased hardness of the weld zone.

36 MATERIALS SCIENCE↗

Surface analysis of mixed-conducting ferrite membranes by the conversion-electron Moessbauer spectroscopy

Conversion-electron Moessbauer spectroscopy analysis of iron surface states in the dense ceramic membranes made of {sup 57}Fe-enriched SrFe{sub 0.7}Al{sub 0.3}O{sub 3-{delta}} perovskite, shows no traces of reductive decomposition or carbide formation in the interfacial layers after operation under air/CH{sub 4} gradient at 1173 K, within the limits of experimental uncertainty. The predominant trivalent state of iron cations at the membrane permeate-side surface exposed to flowing dry methane provides evidence of the kinetic stabilization mechanism, which is only possible due to slow oxygen-exchange kinetics and enables long-term operation of the ferrite-based ceramic reactors for natural gas conversion. At the membrane feed-side surface exposed to air, the fractions of Fe{sup 4+} and Fe{sup 3+} are close to those in the powder equilibrated at atmospheric oxygen pressure, suggesting that the exchange limitations to oxygen transport are essentially localized at the partially reduced surface. - Graphical Abstract: Conversion-electron Moessbauer spectroscopy analysis of dense ceramic membranes made of {sup 57}Fe-enriched SrFe{sub 0.7}Al{sub 0.3}O{sub 3-{delta}} perovskite, shows no reductive decomposition in thin interfacial layers after testing under air/CH{sub 4} gradient, enabling stable operation of the ferrite-based ceramic reactors for partial oxidation of methane. Highlights: > Conversion-electron Moessbauer spectroscopy is used for mixed-conducting membranes. > No decomposition is detected in the membrane surface layers under air/CH{sub 4} gradient. > Due to kinetic stabilization, Fe{sup 3+} states prevail at the surface exposed to methane. > Transmission Moessbauer spectra show perovskite decomposition on equlibration in CH{sub 4}. > Ferrite-based ceramic reactors can stably operate under air/CH{sub 4} gradient.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structures and magnetic properties of strontium and copper doped lanthanum ferrites

The crystal and magnetic structures of La{sub 0.8}Sr{sub 0.2}Fe{sub 1-x}Cu{sub x}O{sub 3-w} compounds, which exhibit coercive fields larger than any others reported for iron-based perovskites, have been analyzed at room temperature with the neutron powder diffraction technique and the Rietveld method of profile fitting. For x in the range 0.05-0.10 the material is monophasic with orthorhombic symmetry (space group Pnma), and crystallizes in the perovskite-like cell of LaFeO{sub 3}, Fe/Cu cations occupy octahedral sites, La/Sr cations are twelve-fold coordinated. For x=0.20 the material is biphasic, with a main orthorhombic phase (space group Pnma) and a secondary rhombohedral phase with space group R-3c (hexagonal setting). The structural transition from the orthorhombic to the rhombohedral phase reduces the structural distortion of the (Fe/Cu)O{sub 6} octahedron. The average bond distance (Fe/Cu)-O and the pseudo-cubic unit cell volume decrease with increasing Cu content in accordance with the presence of higher valence states of the transition metals. The magnetic structure was modeled for the monophasic samples (x=0.05 and 0.10) assuming an antiferromagnetic interaction between Fe/Cu neighboring cations (G-type): the magnetic moments order antiferromagnetically along the b-axis, with the spin direction along a-axis. The magnetic moments of the Fe/Cu atoms are {mu}{sub x}=2.66(3){mu}{sub B} and 2.43(3){mu}{sub B} for the compositions x=0.05 and 0.10, respectively. By measuring the first magnetization curve and the hysteresis loops, coexisting antiferromagnetic and weak ferromagnetic interactions were observed for all samples. - Graphical abstract: Hysteresis loops measured at room temperature of the sample with x=0.05. Highlights: Black-Right-Pointing-Pointer Iron based perovskites with the largest coercive fields. Black-Right-Pointing-Pointer Sr and Cu lanthanum ferrites as magnetic materials. Black-Right-Pointing-Pointer Doped lanthanum ferrites show antiferromagnetic and weak ferromagnetic interactions. Black-Right-Pointing-Pointer Sr and Cu lanthanum ferrites show distorted perovkite structure.

36 MATERIALS SCIENCE↗

Synthesis, dielectric behavior and impedance measurement studies of Cr-substituted Zn-Mn ferrites

Graphical abstract: Variation of dielectric constant with frequency. Research highlights: {yields} Sol-gel route synthesized spherical crystalline nanoparticles of ZnMn{sub 1-x}Cr{sub x}FeO{sub 4}. {yields} XRD, DTA, FTIR, SEM, dielectric and impedance study. {yields} The ferrites show concentration dependence of ac electrical conductivity. {yields} Impedance response is dominated by grain boundary behavior. -- Abstract: Nanocrystalline ZnMn{sub 1-x}Cr{sub x}FeO{sub 4} (1.0 {>=} x {>=} 0) ferrites were synthesized by sol-gel technique. X-ray diffraction (XRD) confirmed the formation of single phasic cubic spinel lattice for all the compositions studied. Lattice parameter shows a decreasing trend with an increase in Cr content in the compositions. Formation of spherical nanoparticles was revealed by scanning electron microscopy (SEM) analysis. Infrared spectroscopic studies revealed two main absorption bands in the range 400-800 cm{sup -1} arising due to tetrahedral (A) and octahedral (B) site vibrations. Dielectric constant, dielectric loss tangent, ac conductivity and complex impedance were measured as a function of frequency in the range 20 Hz to 1 MHz. Frequency dependence of dielectric constant shows dielectric dispersion due to the Maxwell-Wagner type of interfacial polarization. The role of chromium in modifying structural and dielectric properties of these ferrites has been explained.

36 MATERIALS SCIENCE↗

Elastic behaviour of microwave hydrothermally synthesized nanocrystalline Mn{sub 1-x}-Zn{sub x} ferrites

Highlights: Black-Right-Pointing-Pointer The study of elastic properties of nanocrystalline MnZn ferrites synthesized by microwave hydrothermal method was reported for first time. Black-Right-Pointing-Pointer The temperature and magnetic field dependence of Young's modulus and internal friction have been measured for the first time. Black-Right-Pointing-Pointer To understand the interaction of domain wall with ultrasonic velocity a detailed study has been carried out for the first time. -- Abstract: Microwave-hydrothermal (M-H) method has been successfully used for synthesis of nanocrystalline Mn-Zn ferrites which are used for high frequency applications. The nanopowders were characterized using XRD and TEM. The particle size of the samples varies from {approx}20 nm to 25 nm. The powders were densified at 900 Degree-Sign C/30 min using microwave sintering method. The sintered ferrite samples were characterized using XRD, X-ray photoelectron spectroscopy (XPS), SEM and energy dispersive X-ray spectroscopy (EDS). The elastic behaviour and internal friction studies were carried out using composite piezoelectric oscillator method in the temperature range of 300-600 K. It was found that the anomalous behaviour observed in the temperature dependence of Young's modulus and internal friction disappears with the application of a magnetic field equal to the saturation field (900 mT) of the specimen under investigation. The observed anomalous behaviour in the vicinity of the Curie temperature was understood with the help of Landau's theory.

36 MATERIALS SCIENCE↗

Efficient gas sensitivity in mixed bismuth ferrite micro (cubes) and nano (plates) structures

Graphical abstract: Display Omitted Highlights: ► Micro (cubes) structure embedded in nano (plates) of bismuth ferrite was prepared by a chemical method. ► These structures were characterized by XRD and SEM. ► LPG, CO{sub 2} and NH{sub 4} gases were exposed. ► Properties related to gas sensors were measured and reported. -- Abstract: Mixed micro (cubes) and nano (plates) structures of bismuth ferrite (BFO) have been synthesized by a simple and cost-effective wet-chemical method. Structural, morphological and phase confirmation characteristics are measured using X-ray diffraction, field-emission scanning electron microscopy (FE-SEM) and energy dispersive X-ray analysis techniques. The digital FE-SEM photo-images of BFO sample confirmed an incubation of discrete micro-cubes into thin and regularly placed large number of nano-plates. The bismuth ferrite, with mixed structures, films show considerable performance when used in liquefied petroleum (LPG), carbon dioxide (CO{sub 2}) and ammonium (NH{sub 3}) gas sensors application. Different chemical entities in LPG have made it more efficient with higher sensitivity, recovery and response times compared to CO{sub 2} and NH{sub 3} gases. Furthermore, effect of palladium surface treatment on the gas sensitivity and the charge transfer resistances of BFO mixed structures is investigated and reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation and characterization of spinel nickel ferrite obtained by the soft mechanochemically assisted synthesis

Graphical abstract: Display Omitted Highlights: ► NiFe{sub 2}O{sub 4} has been prepared by a soft mechanochemical route from mixture of powders. ► The spinel phase formation was completed after 25 h. ► The synthesized ferrites have a crystallite size of about 25 and 15 nm. ► Based on Raman research is observed five first-order Raman active modes. ► We were able to estimate the degree of inversion at most 0.82 and 0.66. -- Abstract: Nickel ferrite, NiFe{sub 2}O{sub 4} has been prepared by a soft mechanochemical route from mixture of (1) Ni(OH){sub 2} and α-Fe{sub 2}O{sub 3} and (2) Ni(OH){sub 2} and Fe(OH){sub 3} powders in a planetary ball mill for varying duration. Soft mechanochemical reaction leading to formation of the NiFe{sub 2}O{sub 4} spinel phase was followed by X-ray diffraction, Raman and infrared spectroscopy, TGA, scanning and transmission microscopy. The spinel phase formation was first observed after 4 h of milling and its formation was completed after 25 h in the both cases. The synthesized NiFe{sub 2}O{sub 4} ferrite has a nanocrystalline structure with a crystallite size of about 20 and 10 nm respectively for the cases (1) and (2). The final grain size in the system (1) is about twice as large as that in the system (2), what is a consequence of different reaction paths in these two processing routes. There are five Raman and four IR active modes. Mössbauer spectroscopy studies implied on the possible cation distribution between the tetrahedral and octahedral sites in formed NiFe{sub 2}O{sub 4} spinel structure. We were able to estimate the degree of inversion at most 0.82 in the case (1) and 0.66 in the case (2).

36 MATERIALS SCIENCE↗

Influence of rare earth ion (Y{sup 3+}) on the magnetic and dc electrical properties of high density nanocrystalline Mg-Cd ferrites

Graphical abstract: Display Omitted Highlights: ► XRD confirm biphasic nature. ► Grain and crystallite are reduced as compared to ceramic method. ► The resistivity and magnetization increases with Y{sup 3+} addition in Mg-Cd ferrites. ► Coercivity and saturation magnetization shows size dependent behavior. -- Abstract: The samples having general formula Mg{sub 1−x}Cd{sub x}Fe{sub 2}O{sub 4} (x = 0, 0.2, 0.4, 0.6, 0.8 and 1) with 5% Y{sup 3+} addition were prepared by oxalate co-precipitation technique. The characterization was carried by XRD, SEM and FTIR techniques. The XRD confirms the cubic spinel structure with orthoferrite (YFe{sub 2}O{sub 3}) secondary phase. Average crystallite size and grain size lies in the range (28.86–32.66 nm and 0.37–0.69 μm). The grain size is calculated by linear intercept method and lies in the range of 0.37–0.69 μm. The FT-IR shows two absorption bands in the frequency range of 350–800 cm{sup −1}. The addition of Y{sup 3+} for Fe{sup 3+} forms a secondary phase on the grain boundaries and increases the saturation magnetization with respect to that of pure Mg-Cd ferrites. The saturation magnetization, magnetic moment and coercive field is found to increase with cadmium content up to x = 0.4, obeying Neel's two sublattice model and decrease thereafter showing existence of non-collinear spin interaction. The saturation magnetization and coercivity shows size dependent behavior. Y–K type ordering is present in all samples except x = 1. The DC electrical resistivity increases while the Curie temperature (T{sub c}) decreases, with increase in cadmium content. The DC resistivity of Y{sup 3+} added Mg-Cd ferrite is higher than that reported for pure samples and for ceramic method. Activation energy in paramagnetic region is higher than that in ferromagnetic region.

36 MATERIALS SCIENCE↗

Probing the Chemical Stability of Mixed Ferrites: Implications for Magnetic Resonance Contrast Agent Design

Nanomaterials with mixed composition, in particular magnetic spinel ferrites, are emerging as efficient contrast agents for magnetic resonance imaging. Many factors, including size, composition, atomic structure, and surface properties, are crucial in the design of such nanoparticle-based probes because of their influence on the magnetic properties. Silica-coated iron oxide (IO-SiO{sub 2}) and cobalt ferrite (CoIO-SiO{sub 2}) nanoparticles were synthesized using standard high-temperature thermal decomposition and base-catalyzed water-in-oil microemulsion techniques. Under neutral aqueous conditions, it was found that 50-75% of the cobalt content in the CoIO-SiO{sub 2} nanoparticles leached out of the core structure. Leaching caused a 7.2-fold increase in the longitudinal relaxivity and an increase in the saturation magnetization from {approx}48 to {approx}65 emu/g of the core. X-ray absorption fine structure studies confirmed that the atomic structure of the ferrite core was altered following leaching, while transmission electron microscopy and dynamic light scattering confirmed that the morphology and size of the nanoparticle remained unchanged. The CoIO-SiO{sub 2} nanoparticles converted from a partially inverted spinel cation arrangement (unleached state) to an inverse spinel arrangement (leached state). The control IO-SiO{sub 2} nanoparticles remained stable with no change in the structure and negligible changes in the magnetic behavior. This detailed analysis highlights how important understanding the properties of nanomaterials is in the development of reliable agents for diagnostic and therapeutic applications.

36 MATERIALS SCIENCE↗

Study of microstructure and semiconductor to metallic conductivity transition in solid state sintered Li{sub 0.5}Mn{sub 0.5}Fe{sub 2}O{sub 4−δ} spinel ferrite

Li{sub 0.5}Mn{sub 0.5}Fe{sub 2}O{sub 4} ferrite has been prepared by solid state sintering route. XRD pattern showed single phased cubic spinel structure. The samples exhibited typical character of plastoferrite with ring shaped surface microstructure. New feature observed in the present ferrite is the frequency activated conductivity transition from semiconductor to metallic state above 800 K. The increase of conductivity with frequency in the semiconducting regime follows Jonscher power law, while decrease of conductivity in metallic regime obeys Drude equation. The conductivity in semiconductor regime has been understood by hopping mechanism of localized charge carriers among the cations in B sites of cubic spinel structure. At higher temperatures, overlapping of electronic orbitals from neighbouring ions and free particle like motion of lighter Li{sup +} ions among interstitial lattices contributed metallic conductivity. The samples provided evidence of localized nature of the charge carriers at lower temperatures and increasing delocalized character with the increase of measurement temperature. From application point of view, such ferrites behave as semiconductor at low temperature and allow electromagnetic wave to pass through, but transform into a metallic reflector with negative dielectric constant at high temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and characterization of ferrite materials for thermochemical CO2 splitting using concentrated solar energy.

The Sunshine to Petrol effort at Sandia aims to convert carbon dioxide and water to precursors for liquid hydrocarbon fuels using concentrated solar power. Significant advances have been made in the field of solar thermochemical CO{sub 2}-splitting technologies utilizing yttria-stabilized zirconia (YSZ)-supported ferrite composites. Conceptually, such materials work via the basic redox reactions: Fe{sub 3}O{sub 4} {yields} 3FeO + 0.5O{sub 2} (Thermal reduction, >1350 C) and 3FeO + CO{sub 2} {yields} Fe{sub 3}O{sub 4} + CO (CO{sub 2}-splitting oxidation, <1200 C). There has been limited fundamental characterization of the ferrite-based materials at the high temperatures and conditions present in these cycles. A systematic study of these composites is underway in an effort to begin to elucidate microstructure, structure-property relationships, and the role of the support on redox behavior under high-temperature reducing and oxidizing environments. In this paper the synthesis, structural characterization (including scanning electron microscopy and room temperature and in-situ x-ray diffraction), and thermogravimetric analysis of YSZ-supported ferrites will be reported.

14 SOLAR ENERGY↗

XMCD and XMCD-PEEM Studies on Magnetic-Field-Assisted Self-Assembled 1D Nanochains of Spherical Ferrite Particles

Quasi-1D nanochains of spherical magnetic ferrite particles with a homogeneous particle size of ≈200 nm and a micrometer-sized chain length are fabricated in this paper via a self-assembly method under an external magnetic field. This assisting magnetic field (H assist ), applied during synthesis, significantly modifies the distribution of the Fe 2+ O h , Fe 3+ T d , and Fe 3+ O h cations in the chains, as demonstrated by X-ray magnetic circular dichroism (XMCD) combined with theoretical analysis. This provides direct evidence of the nontrivial role of external synthetic conditions for defining the crystal chemistry of nanoscale ferrites and in turn their magnetic properties, providing an extra degree of freedom for intentional control over the performances of 1D magnetic nanodevices for various applications. Magnetic imaging, performed via XMCD in photoemission electron microscopy, further shows the possibility of creating and trapping a series of adjacent magnetic domain walls in a single chain, suggesting that there is great application potential for these nanochains in 1D magnetic nanodevices, as determined by field- or current-driven domain wall motions. Finally, practical control over the magnetic properties of the nanochains is also achieved by extrinsic dopants of cobalt and zinc, which are observed to occupy the ferrite ionic sites in a selective manner.

1D nanochains↗

Broadband and Tunable Microwave Absorption Properties from Large Magnetic Loss in Ni–Zn Ferrite

Highly effective electromagnetic (EM) wave absorber materials with strong reflection loss (RL) and a wide absorption bandwidth (EBW) in gigahertz (GHz) frequencies are crucial for advanced wireless applications and portable electronics. Traditional microwave absorbers lack magnetic loss and struggle with impedance matching, while ferrites are stable, exhibit excellent magnetic and dielectric losses, and offer better impedance matching. However, achieving the desired EBW in ferrites remains a challenge, necessitating further composition design. In this study, impedance matching is successfully enhanced and EBW in Ni–Zn ferrite is broadened by successive doping with Mn and Co , without incorporation of any polymer filler. It is found that Ni 0.4 Co 0.1 Zn 0.5 Fe 1.9 Mn 0.1 O 4 material exhibits exceptional EM wave absorption, with a maximum RL of −48.7 dB. It also featured a significant EBW of 10.8 GHz, maintaining a 90% absorption rate (RL < −10 dB) for a thickness of 4.5 mm. These outstanding properties result from substantial magnetic losses and favorable impedance matching. These findings represent a significant step forward in the development of microwave absorber materials, addressing EM wave pollution concerns within GHz frequencies, including the frequency band used in popular 5G technology.

36 MATERIALS SCIENCE↗

A Mössbauer Spectroscopy Investigation of Nickel‐Zinc Ferrites Synthesized by a Self‐Combustion Method for Soft Magnetic Core Applications

Soft ferrites are materials of interest for magnetic cores, as used for wireless charging transformers. Their low permeabilities, high resistivity, and magnetic polarization make them interesting for high-power electric vehicle charging and drive systems. The nickel-zinc-doped ferrites are of particular interest; however, the compositional space is quite large with respect to dopant concentrations, stoichiometric ratios and synthesis technique. Nickel-zinc spinel ferrites with varying nickel-zinc ratios prepared by a self-combustion reaction followed by heat treatment exhibit good crystallinity, and their low-temperature Mössbauer spectra show local magnetism and site occupation in agreement with materials prepared by solid-state reaction. Thus, the combustion synthesis method offers a facile tunability of compositions, which, combined with the possibility of rapid characterization of atomic-scale magnetism by Mössbauer spectroscopy, enables advances in the compositional and processing space at a fast pace. Low-temperature Mössbauer spectroscopy data for samples with increasing nickel content reveals a systematic increase in average hyperfine field (2.8 T/Ni) and decrease in average isomer shift (−0.036 mm/s/Ni) that can determine the nickel/zinc content, even in the absence of applied magnetic field data. Furthermore, a gradual evolution of color is also observed with increasing nickel content, albeit trends in color depend on sintering conditions.

Mössbauer spectroscopy↗

Magnetization in Nanocrystalline PLD Zinc Ferrite Thin Films Deposited on Fused Quartz Substrate

The nanocrystalline zinc ferrite (ZnFe{sub 2}O{sub 4}) thin films were grown on the fused quartz substrate using pulsed laser deposition. The effects of atmospheric conditions on structural, magnetic, and morphological properties have been systematically studied using X-ray diffraction, vibrating sample magnetometry, and atomic force microscopy. The films showed textured growth of zinc ferrite for the substrate temperatures at ≥ 600 °C irrespective of the ambient environment. Interestingly, thin films of zinc ferrite showed a magnetic hysteresis loop in contrast to the paramagnetic nature of their bulk counterpart. The value of saturation magnetization (4πM{sub s}) increased from 130 to 360 G when the substrate temperature was increased from room temperature (RT) to 800 °C in the oxygen atmosphere. In the absence of oxygen pressure, the value of 4πM{sub s} is observed to be 330 G for the film deposited at RT and found to increase to a value of 670 G when the film is deposited at 400 °C and the maximum value of 2580 G is observed for the film deposited at 700 °C. However, the value of 4πM{sub s} of 800 °C dropped down to 2000 G.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Cr{sup 3+} Ions Substitution on Structural and Magnetic Properties of Co Ferrite Nanoparticles

A series of polycrystalline nanoferrite having the chemical formula CoCr{sub x}Fe{sub 2−x}O{sub 4} (x = 0.0, 0.2, 0.4, 0.6, 0.8, and 1.0) were synthesized by sol-gel autocombustion method. X-ray diffraction (XRD) analysis was used to investigate the structural parameters and also to check the phase purity of all prepared samples. The analysis of XRD patterns revealed the formation of single-phase cubic spinel structure for all samples. The average particle size of the synthesized ferrites was identified by X-ray diffraction and scanning electron microscopy technique. The magnetic properties of Co-Cr nanoferrites were measured using a hysteresis loop tracer at room temperature and magnetic field of 5 KOe. Saturation magnetization (M{sub s}) and coercivity (H{sub c}) decrease with the increasing Cr{sup 3+} ions concentration in the Co-Cr ferrite, indicating that lesser magnetic Cr{sup 3+} ions substitute Fe{sup 3+} ions in the octahedral sublattice of the ferrite. Such materials are useful to reduce the energy loss in AC electrical appliances.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impact of Rare Earth Gd{sup 3+} Ions on Structural and Magnetic Properties of Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2−x}Gd{sub x}O{sub 4} Spinel Ferrite: Useful for Advanced Spintronic Technologies

In this article, we have synthesized the Gd{sup 3+}-doped Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2−x}Gd{sub x}O{sub 4} (x = 0.05, 0.07, 1.0) ferrite samples using solid-state reaction route. The effects of Gd{sup 3+} doping on structural, vibrational, electrical and magnetic properties were studied. Structural and vibrational properties were characterized by x-ray diffraction (XRD), Raman, and FTIR spectroscopy. XRD data indicate that the Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2−x}Gd{sub x}O{sub 4} ceramics crystallize in single-phase spinel cubic (Fd3m space group) structure. Infrared spectra show two strong absorption bands in the frequency range of 400–600 cm{sup −1} which were, respectively, attributed to tetrahedral and octahedral sites of the spinel ferrite. All the prepared samples show the typical dielectric dispersion having Maxwell–Wagner-type interfacial polarization. Decrease in dielectric constant and loss tangent has been observed with frequency and doping concentration. M − H plots reveal that all the samples exhibit ferrimagnetic nature at room temperature. A significant increase in the saturation magnetization has been observed upon the substitution of Gd{sup 3+} ions. All the as-prepared samples are isotropic and soft magnetic materials. These ferrite compounds are advantageous in advanced high-density data storage and high-frequency devices applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of the Fe/Ba Ratio and Sintering Temperature on Microstructure and Magnetic Properties of Barium Ferrites Prepared by Hydrothermal Method

Magnetoplumbite-type (M-type) hexagonal barium ferrite particles were synthesized by a hydrothermal method. The structure and magnetic properties of barium ferrites were investigated systematically, which indicated that the ratio of Fe/Ba (R{sub F/B}) and sintering temperature have an important effect on structure and performance. Phase composition, micro-morphology, and magnetic properties of the particles were investigated by X-ray powder diffraction (XRD) analysis, scanning electron microscopy (SEM), and vibrating sample magnetometry (VSM). When the ratio of Fe/Ba (R{sub F/B}) is even low or high, inferior images of XRD could be attained with certain impurities. When R{sub F/B} = 8, the single phase could be obtained without impurities. Micro-morphology of the particles exhibits the uniform plane hexagonal structures of nano-sized M-type ferrites when sintered at 800 °C. Saturation magnetization (M{sub s}) reaches the maximum value at R{sub F/B} = 7 (M{sub s} = 45.07 emu/g). The value of coercivity (H{sub c}) increases with the growth of R{sub F/B}, and H{sub c} is up to 6207 Oe when R{sub F/B} = 7. The effect of R{sub F/B} and temperature on magnetization (M{sub s}) and coercivity (H{sub c}) was studied in this paper.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗