Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Examination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Ciliated protozoa of two antarctic lakes: analysis by quantitative protargol staining and examination of artificial substrates

Planktonic and artificial substrate-associated ciliates have been identified in two perennially ice-covered antarctic lakes of the McMurdo Dry Valleys. Abundances estimated by quantitative protargol staining ranged from < 5 to 31690 cells l-1, levels that are comparable to those previously obtained using other methods. Nineteen ciliate taxa were identified from these lakes, with the most frequently encountered genera being Plagiocampa, Askenasia, Monodinium, Sphaerophrya and Vorticella. The taxonomic findings compare favorably with those of previous investigators; however four previously unreported genera were observed in both Lakes Fryxell and Hoare. The variability in the depth distributions of ciliates in Lake Fryxell is explained in terms of lake physicochemical properties and ciliate prey distributions, while factors related to temporal succession in the Lake Hoare assemblage remain unexplained. Local marine or temperate zone freshwater habitats are a more likely source than the surrounding dry valleys soils for present ciliate colonists in these lakes. Although the taxonomic uncertainties require further examination, our results suggest that ciliate populations in these antarctic lakes undergo significant fluctuations and are more diverse than was previously recognized.

NASA Discipline Exobiology↗

Genesis Preliminary Examination: Ellipsometry Overview

The Genesis spacecraft returned to Earth on September 8, 2004, experiencing a non-nominal reentry in which both the drogue and main parachutes failed to deploy causing the capsule to impact the surface of the UTTR desert at a speed of approximately 310 kph (193 mph). The impact caused severe damage to the capsule and a breach of the science canister in the field. The science canister was recovered and transported to the cleanroom at UTTR within approximately 8 hours of reentry. Although the ground water table did not rise to canister level before removal, damp soil and debris from the heat shield and other spacecraft components did enter the canister and contaminate some collector surfaces. The objective of preliminary examination of the Genesis collectors is to provide the science community with the information necessary to request the most useful samples for their analysis.

Stansbery, E. K.↗

Fractographic Examination of the Vertical Stabilizer and Rudder from American Airlines Flight 587

The first major structural component failure of a composite part on a commercial airplane occurred during the crash of American Airlines Flight 587. The fractured composite lugs that attached the vertical stabilizer to the aircraft tail and the fractured composite honeycomb rudder were examined as part of the National Transportation Safety Board investigation of the accident. In this paper the composite fractures are described and the resulting clues to the failure events are discussed.

Fox, Matthew R.↗

Urban forms, physical activity and body mass index: a cross-city examination using ISS Earth Observation photographs

Johnson Space Center has archived thousands of astronauts acquired Earth images. Some spectacular images have been widely used in news media and in k-12 class room, but their potential utilizations in health promotion and disease prevention have relatively untapped. The project uses daytime ISS photographs to define city forms and links them to city or metropolitan level health data in a multicity context. Road connectivity, landuse mix and Shannon's information indices were used in the classification of photographs. In contrast to previous remote-sensing studies, which tend to focus on a single city or a portion of a city, this project utilized photographs of 39 U.S. cities. And in contrast to previous health-promotion studies on the built environment, which tend to rely on survey respondents' responses to evaluate road connectivity or mixed land use for a single study site, the project examined the built environments of multiple cities based on ISS photos. It was found that road connectivity and landuse mix were not statistically significant by themselves, but the composite measure of the Shannon index was significantly associated with physical activity, but not BMI. Consequently, leisure-time physical activity seems to be positively associated with the urban complexity scale. It was also concluded that unless they are planned or designed in advance, photographs taken by astronauts generally are not appropriate for a study of a single-site built environment nor are they appropriate for a study of infectious diseases at a local scale. To link urban built environment with city-wide health indicators, both the traditional nadir view and oblique views should be emphasized in future astronauts' earth observation photographs.

Lin, Ge↗

The Hollow Spheres of the Orgueil Meteorite: A Re-Examination

In 1971, Rossignol-Strick and Barghoorn provided images and a description of a number of spherical hollow microstructures showing well-defined walls in acid macerated extract of the Orgueil CI carbonaceous meteorite. Other forms such as membranes and spiral shaped structures were also reported. The carbon-rich (kerogen) hollow spheres were found to be in a narrowly constrained distribution of sizes (mainly 7 to 10 microns in diameter). Electron microprobe analysis revealed that these spheres contained Carbon, possibly P, N, and K. It was established that these forms could not be attributed to pollen or other recent terrestrial contaminants. It was concluded that they most probably represented organic coatings on globules of glass, olivine or magnetite in the meteorite. However, recent studies of the Orgueil meteorite have been carried out at the NASA/Marshall Space Flight Center with the S-4000 Hitachi Field Emission Scanning Electron Microscope (FESEM). These investigations have revealed the presence of numerous carbon encrusted spherical magnetite platelets and spherical and ovoidal bodies of elemental iron in-situ in freshly fractured interior surfaces of the meteorite. Their size range is also very narrowly constrained (typically approximately 6 to 12 microns) in diameter. High resolution images reveal that these bodies are also encrusted with a thin carbonaceous sheath and are surrounded by short nanofibrils that are shown to be composed of high purity iron by EDAX elemental analysis. We present Secondary and Backscatter Electron FESEM images and associated EDAX elemental analyses and 2D X-ray maps of these forms as we re-examine the hollow spheres of Orgueil and attempt to determine if they are representatives of the same population of indigenous microstructures.

Hoover, Richard B.↗

Effects of High-Temperature Exposures on the Fatigue Life of Disk Superalloys Examined

Tests used to characterize the low-cycle-fatigue resistance of disk superalloys are usually performed at cyclic frequencies of 0.33 Hz or faster. However, service conditions for disks in some aerospace and land-based gas turbine engines can produce major cycle periods extending from minutes to hours and days. Over a service life, this can produce total service times near the maximum temperature that exceed 100 hr for aerospace applications and 100,000 hr for land-based applications. Such time-dependent effects of realistic mission cycles on fatigue resistance can be significant in superalloy disks, and need to be considered for accurate disk life prediction. The purpose of this study at the NASA Glenn Research Center was to examine the effects of extended exposures and extended cycle periods on the fatigue resistance of two disk superalloys. Current alloy Udimet 720 (Special Metals Corporation, Huntington, WV) disk material was provided by Solar Turbines/Caterpillar Co., and advanced alloy ME3 was provided by the NASA Ultra-Efficient Engine Technologies (UEET) Project, in powder-metallurgy-processed, supersolvus heat-treated form. Fatigue specimens were fully machined and exposed in air at temperatures of 650 to 704 C for extended times. Then, they were tested using conventional fatigue tests with a total strain range of 0.70 percent and a minimum-to-maximum strain ratio of zero to determine the effects of prior exposure on fatigue resistance. Subsequent tests with extended dwells at minimum strain in each fatigue cycle were performed to determine cyclic exposure effects.

Gabb, Timothy P.↗

Materials Examination of the Vertical Stabilizer from American Airlines Flight 587

The first in-flight failure of a primary structural component made from composite material on a commercial airplane led to the crash of American Airlines Flight 587. As part of the National Transportation Safety Board investigation of the accident, the composite materials of the vertical stabilizer were tested, microstructure was analyzed, and fractured composite lugs that attached the vertical stabilizer to the aircraft tail were examined. In this paper the materials testing and analysis is presented, composite fractures are described, and the resulting clues to the failure events are discussed.

Fox, Matthew R.↗

Metallurgical examination of an AMTEC power unit

Two AMTEC power units fabricated by Advanced Modular Power Systems, Inc. using a cold end condenser manufactured by Creare, Inc. which operate for 342 hours and 575 hours were dissected and examined.

AMTEC↗

(abstract) Examining Sea Ice SAR Signatures in the Arctic

This research examines the seasonal changes of the sea ice cover in the Arctic Basin as it responds to atmospheric and oceanic conditions. Monitoring this process provides a means of determining the onset and extent of the annual seasonal stages, which is thought to be an indicator for detecting climate change in the polar regions. Much of the response of sea ice to seasonal conditions results in changes in the phase of water (both in the ice and snow cover), surface roughness, and internal properties such as air bubbles. Imagery from SAR has proven to be an important tool for revealing these changes since radar backscatter is affected by both surface roughness and dielectric properties of water and salt. The major ice types and ice features may have unique SAR backscatter signatures because of the inherent variations in surface roughness, salinity, and internal properties in each category.

change surface roughness dielectric properties↗

An Examination of the Performance of Parallel Calculation of the Radiation Integral on a Beowulf-Class Computer

This paper uses the parallel calculation of the radiation integral for examination of performance and compiler issues on a Beowulf-class computer. This type of computer, built from mass-market, commodity, off-the-shelf components, has limited communications performance and therefore also has a limited regime of codes for which it is suitable.

Beowulf cluster pile of PCs parallel computation p↗

Examination of the Armagh Observatory Annual Mean Temperature Record, 1844-2004

The long-term annual mean temperature record (1844-2004) of the Armagh Observatory (Armagh, Northern Ireland, United Kingdom) is examined for evidence of systematic variation, in particular, as related to solar/geomagnetic forcing and secular variation. Indeed, both are apparent in the temperature record. Moving averages for 10 years of temperature are found to highly correlate against both 10-year moving averages of the aa-geomagnetic index and sunspot number, having correlation coefficients of approx. 0.7, inferring that nearly half the variance in the 10-year moving average of temperature can be explained by solar/geomagnetic forcing. The residuals appear episodic in nature, with cooling seen in the 1880s and again near 1980. Seven of the last 10 years of the temperature record has exceeded 10 C, unprecedented in the overall record. Variation of sunspot cyclic averages and 2-cycle moving averages of temperature strongly associate with similar averages for the solar/geomagnetic cycle, with the residuals displaying an apparent 9-cycle variation and a steep rise in temperature associated with cycle 23. Hale cycle averages of temperature for even-odd pairs of sunspot cycles correlate against similar averages for the solar/geomagnetic cycle and, especially, against the length of the Hale cycle. Indications are that annual mean temperature will likely exceed 10 C over the next decade.

Wilson, Robert M.↗

An Examination of Sunspot Number Rates of Growth and Decay in Relation to the Sunspot Cycle

On the basis of annual sunspot number averages, sunspot number rates of growth and decay are examined relative to both minimum and maximum amplitudes and the time of their occurrences using cycles 12 through present, the most reliably determined sunspot cycles. Indeed, strong correlations are found for predicting the minimum and maximum amplitudes and the time of their occurrences years in advance. As applied to predicting sunspot minimum for cycle 24, the next cycle, its minimum appears likely to occur in 2006, especially if it is a robust cycle similar in nature to cycles 17-23.

Wilson, Robert M.↗

Examination of B. subtilis var. niger Spore Killing by Dry Heat Methods

Dry heat microbial reduction is the only NASA approved sterilization method to reduce the microbial bioburden on space-flight hardware prior to launch. Reduction of the microbial bioburden on spacecraft is necessary to meet planetary protection requirements specific for the mission. Microbial bioburden reduction also occurs if a spacecraft enters a planetary atmosphere (e.g., Mars) and is heated due to frictional forces. Temperatures reached during atmospheric entry events (>200 C) are sufficient to damage or destroy flight hardware and also kill microbial spores that reside on the in-bound spacecraft. The goal of this research is to determine the survival rates of bacterial spores when they are subjected to conditions similar to those the spacecraft would encounter (i.e., temperature, pressure, etc.). B. subtilis var. niger spore coupons were exposed to a range of temperatures from 125 C to 200 C in a vacuum oven (at <1 Torr). After the exposures, the spores were removed by sonication, dilutions were made, and the spores were plated using the pour plate method with tryptic soy agar. After 3 days incubation at 32 C, the number of colony-forming units was counted. Lethality rate constants and D-values were calculated at each temperature. The calculated D-values were: 27 minutes (at 125 C), 13 minutes (at 135 C), and <0.1 minutes (at 150 C). The 125 C and 135 C survivor curves appeared as concavedownward curves. The 150 C survivor curve appeared as a straight-line. Due to the prolonged ramp-up time to the exposure conditions, spore killing during the ramp-up resulted in insufficient data to draw curves for exposures at 160 C, 175 C, and 200 C. Exploratory experiments using novel techniques, with short ramp times, for performing high temperature exposures were also examined. Several of these techniques, such as vacuum furnaces, thermal spore exposure vessels, and laser heating of the coupons, will be discussed.

bacillus subtilis var niger↗

Special, Unopened Lunar Samples: Is it Time to Examine Them?

During the last three missions to the Moon several samples were collected and immediately placed in a vacuum tight-containers. Three of these samples have never been opened and, together with 2 samples not placed in vacuum, are the only lunar samples that have not been examined. There were, however, samples collected immediately adjacent to many of these samples that have been studied. Because there was nothing notable about these samples, there was no compelling reason to open these samples, and it was decided that they be preserved for future studies. The purpose of this abstract is to remind the science community of their existence and to open a discussion as to whether this is an appropriate time to study one or more of these samples

Lofgren, Gary E.↗

The Atmospheric Radiation Measurement Program May 2003 Intensive Operations Period Examining Aerosol Properties and Radiative Influences: Preface to Special Section

Atmospheric aerosols influence climate by scattering and absorbing radiation in clear air (direct effects) and by serving as cloud condensation nuclei, modifying the microphysical properties of clouds, influencing radiation and precipitation development (indirect effects). Much of present uncertainty in forcing of climate change is due to uncertainty in the relations between aerosol microphysical and optical properties and their radiative influences (direct effects) and between microphysical properties and their ability to serve as cloud condensation nuclei at given supersaturations (indirect effects). This paper introduces a special section that reports on a field campaign conducted at the Department of Energy Atmospheric Radiation Measurement site in North Central Oklahoma in May, 2003, examining these relations using in situ airborne measurements and surface-, airborne-, and space-based remote sensing.

Ferrare, Richard↗

Stardust Interstellar Preliminary Examination (ISPE)

In January 2006 the Stardust sample return capsule returned to Earth bearing the first solid samples from a primitive solar system body, C omet 81P/Wild2, and a collector dedicated to the capture and return o f contemporary interstellar dust. Both collectors were approximately 0.1m(exp 2) in area and were composed of aerogel tiles (85% of the co llecting area) and aluminum foils. The Stardust Interstellar Dust Col lector (SIDC) was exposed to the interstellar dust stream for a total exposure factor of 20 m(exp 2-) day during two periods before the co metary encounter. The Stardust Interstellar Preliminary Examination ( ISPE) is a three-year effort to characterize the collection using no ndestructive techniques. The ISPE consists of six interdependent proj ects: (1) Candidate identification through automated digital microsco py and a massively distributed, calibrated search (2) Candidate extr action and photodocumentation (3) Characterization of candidates thro ugh synchrotronbased FourierTranform Infrared Spectroscopy (FTIR), S canning XRay Fluoresence Microscopy (SXRF), and Scanning Transmission Xray Microscopy (STXM) (4) Search for and analysis of craters in f oils through FESEM scanning, Auger Spectroscopy and synchrotronbased Photoemission Electron Microscopy (PEEM) (5) Modeling of interstell ar dust transport in the solar system (6) Laboratory simulations of h ypervelocity dust impacts into the collecting media

Westphal, A. J.↗