Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Earth Systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Generating Vegetation Leaf Area Index Earth System Data Record from Multiple Sensors: Theory - Part 1

The generation of multi-decade long Earth System Data Records (ESDRs) of Leaf Area Index (LAI) and Fraction of Photosynthetically Active Radiation absorbed by vegetation (FPAR) from remote sensing measurements of multiple sensors is key to monitoring long-term changes in vegetation due to natural and anthropogenic influences. Challenges in developing such ESDRs include problems in remote sensing science (modeling of variability in global vegetation, scaling, atmospheric correction) and sensor hardware (differences in spatial resolution, spectral bands, calibration, and information content). In this paper, we develop a physically based approach for deriving LAI and FPAR products from the Advanced Very High Resolution Radiometer (AVHRR) data that are of comparable quality to the Moderate resolution Imaging Spectroradiometer (MODIS) LAI and FPAR products, thus realizing the objective of producing a long (multi-decadal) time series of these products. The approach is based on the radiative transfer theory of canopy spectral invariants which facilitates parameterization of the canopy spectral bidirectional reflectance factor (BRF). The methodology permits decoupling of the structural and radiometric components and obeys the energy conservation law. The approach is applicable to any optical sensor, however, it requires selection of sensor-specific values of configurable parameters, namely, the single scattering albedo and data uncertainty. According to the theory of spectral invariants, the single scattering albedo is a function of the spatial scale, and thus, accounts for the variation in BRF with sensor spatial resolution. Likewise, the single scattering albedo accounts for the variation in spectral BRF with sensor bandwidths. The second adjustable parameter is data uncertainty, which accounts for varying information content of the remote sensing measurements, i.e., Normalized Difference Vegetation Index (NDVI, low information content), vs. spectral BRF (higher information content). Implementation of this approach indicates good consistency in LAI values retrieved from NDVI (AVHRRmode) and spectral BRF (MODIS-mode). Specific details of the implementation and evaluation of the derived products are detailed in the second part of this two-paper series.

Ganguly, Sangram↗

Earth system modeling: can we stay ahead of what's actually happening?

Over the last forty years, Earth System Models have become more and more comprehensive and detailed. They have assimilated previously independent modeling efforts in ocean circulation, atmospheric composition, the stratosphere, land surface, and the cryosphere, and are today demonstrably more skillful than earlier efforts. Yet the structural uncertainty in the latest model projections is actually increasing. Meanwhile, impacts of climate change on, for instance, wildfires, tropical cyclones and sea level, appear to be increasing faster than we have been able to predict. I will address some of the current issues at the bleeding edges of model development and the continuing importance of model evaluation.

Gavin A Schmidt↗

Global-Scale Convergence Obscures Inconsistencies in Soil Carbon Change Predicted by Earth System Models

Soil carbon (C) responses to environmental change represent a major source of uncertainty in the global C cycle. Feedbacks between soil C stocks and climate drivers could impact atmospheric CO 2 levels, further altering the climate. Here, we assessed the reliability of Earth system model (ESM) predictions of soil C change using the Coupled Model Intercomparison Project phases 5 and 6 (CMIP5 and CMIP6). ESMs predicted global soil C gains under the high emission scenario, with soils taking up 43.9 Pg (95% CI: 9.2–78.5 Pg) C on average during the 21st century. The variation in global soil C change declined significantly from CMIP5 (with average of 48.4 Pg [95% CI: 2.0–94.9 Pg] C) to CMIP6 models (with average of 39.3 Pg [95% CI: 23.9–54.7 Pg] C). For some models, a small C increase in all biomes contributed to this convergence. For other models, offsetting responses between cold and warm biomes contributed to convergence. Although soil C predictions appeared to converge in CMIP6, the dominant processes driving soil C change at global or biome scales differed among models and in many cases between earlier and later versions of the same model. Random Forest models, for soil carbon dynamics, accounted for more than 63% variation of the global soil C change predicted by CMIP5 ESMs, but only 36% for CMIP6 models. Although most CMIP6 models apparently agree on increased soil C storage during the 21st century, this consensus obscures substantial model disagreement on the mechanisms underlying soil C response, calling into question the reliability of model predictions.

54 ENVIRONMENTAL SCIENCES↗

Combining Earth System Modeling and Machine Learning to Investigate Volcanic Sulfate Deposition in Polar Ice Cores

Volcanic eruptions emit large amounts of sulfur dioxide (SO2), water, and other chemicals into the atmosphere, both in the troposphere and the stratosphere. Most of the SO2 is converted to sulfate aerosol, which is eventually deposited following long-range transport. The deposits from large eruptions are potentially detectable in ice cores, but there are many cases in which sulfate layers have not been linked to their source volcanoes. As volcanoes can act as significant shocks to the global climate system, we are interested in locating these eruptions in order to increase understanding of the volcanic record. To narrow down the search, we performed 140 simulations of volcanic eruptions using the GISS ModelE Earth system model. We varied the latitude, longitude, Julian day, plume top, plume bottom, and injected SO2 and H2O amounts using a Latin hypercube sampling approach, and analyzed correlations between these parameters and sulfate depositions at ice core sites in Antarctica and Greenland. Using machine learning and parameter estimation, we generated probability distributions and maximum likelihood estimates for the parameters given sulfate deposition data, which can predict latitude with some skill. We find that the volcano latitude and SO2 content are best correlated with sulfate depositions at each pole, while longitude, Julian day, and H2O have small or insignificant effects. Plume altitude and thickness are important because they determine how much of the SO2 is injected into the stratosphere, which has implications for sulfur transport and lifetimes.

Earth system models↗

Entropy-based feature selection for capturing impacts in Earth system models with abrupt forcing

This paper presents the development of a new entropy-based feature selection method for identifying and quantifying impacts. Here, impacts are defined as statistically significant differences in spatio-temporal fields when comparing datasets with and without an external forcing in an Earth system model. Temporal feature selection is performed by first computing the cross-fuzzy entropy to quantify similarity of patterns between two datasets and then applying changepoint detection to identify regions of statistically constant entropy. The method is used to capture temperate north surface cooling from a 9-member simulation ensemble of the Mt. Pinatubo volcanic eruption, which injected 10 Tg of SO 2 into the stratosphere. The results estimate a mean difference decrease in near surface air temperature of -0.560 K with a 99% confidence interval between -0.864 K and -0.257 K between April and November of 1992, one year following the eruption. A sensitivity analysis with decreasing SO 2 injection revealed that the impact is statistically significant at 5 Tg but not at 3 Tg. Using identified features, a dependency graph model based on a 9-day lag had significantly fewer nodes than a graph based on monthly means. Furthermore, this demonstrates our method’s ability to perform dimension reduction while still uncovering source-to-impact pathways.

Changepoint detection↗

Numerical Water Tracers in the Atmospheric Component of the Energy Exascale Earth System Model: Implementation and Changes in Moisture Origin

Numerical water tracers are implemented in the Energy Exascale Earth System Model version 2. Simulations performed with the water‐tag‐enabled model for both pre‐industrial and future greenhouse gas concentrations reveal a marked increase in the role of mid‐latitude and southern subtropical regions as exporters of atmospheric moisture—to the extratropical upper troposphere and the tropical free troposphere. For the latter, the northward shift of the Intertropical Convergence Zone increases cross‐hemispheric transport of subtropical water vapor to the Northern Hemisphere. In the polar regions, most of the lower tropospheric moistening instead arises from increases in local evaporation. These findings illustrate the utility of the water tags, underscore critical changes in global hydrologic cycle, and provide insight into atmospheric dynamics under future climate scenarios. For applications when a global grid is desired, we additionally propose a novel statistical reconstruction, based on copula modeling, of the joint distribution of origin of water vapor, which reduces the number of tracers from order $\mathcal{O}\left({n}^{2}\right)$to order $\mathcal{O}(n)$, substantially ameliorating the considerable computational cost of water tracers. This statistical reconstruction is particularly beneficial to the interpretation of the relationship between latitude and longitude of origin of moisture over the tropical oceans and in the lower troposphere over land.

copula modeling↗

Global Sensitivity Analysis Using the Ultra‐Low Resolution Energy Exascale Earth System Model

Abstract For decades, Arctic temperatures have increased twice as fast as average global temperatures. As a first step toward quantifying parametric uncertainty in Arctic climate, we performed a variance‐based global sensitivity analysis (GSA) using a fully coupled, ultra‐low resolution (ULR) configuration of version 1 of the U.S. Department of Energy's Energy Exascale Earth System Model (E3SMv1). Specifically, we quantified the sensitivity of six quantities of interests (QOIs), which characterize changes in Arctic climate over a 75 year period, to uncertainties in nine model parameters spanning the sea ice, atmosphere, and ocean components of E3SMv1. Sensitivity indices for each QOI were computed with a Gaussian process emulator using 139 random realizations of the random parameters and fixed preindustrial forcing. Uncertainties in the atmospheric parameters in the Cloud Layers Unified by Binormals (CLUBB) scheme were found to have the most impact on sea ice status and the larger Arctic climate. Our results demonstrate the importance of conducting sensitivity analyses with fully coupled climate models. The ULR configuration makes such studies computationally feasible today due to its low computational cost. When advances in computational power and modeling algorithms enable the tractable use of higher‐resolution models, our results will provide a baseline that can quantify the impact of model resolution on the accuracy of sensitivity indices. Moreover, the confidence intervals provided by our study, which we used to quantify the impact of the number of model evaluations on the accuracy of sensitivity estimates, have the potential to inform the computational resources needed for future sensitivity studies.

54 ENVIRONMENTAL SCIENCES↗

Present and future aerosol impacts on Arctic climate change in the GISS-E2.1 Earth system model

The Arctic is warming 2 to 3 times faster than the global average, partly due to changes in short-lived climate forcers (SLCFs) including aerosols. In order to study the effects of atmospheric aerosols in this warming, recent past (1990–2014) and future (2015–2050) simulations have been carried out using the GISS-E2.1 Earth system model to study the aerosol burdens and their radiative and climate impacts over the Arctic (>60°N), using anthropogenic emissions from the Eclipse V6b and the Coupled Model Intercomparison Project Phase 6 (CMIP6) databases, while global annual mean greenhouse gas concentrations were prescribed and kept fixed in all simulations. Results showed that the simulations have underestimated observed surface aerosol levels, in particular black carbon (BC) and sulfate (SO2−4), by more than 50 %, with the smallest biases calculated for the atmosphere-only simulations, where winds are nudged to reanalysis data. CMIP6 simulations performed slightly better in reproducing the observed surface aerosol concentrations and climate parameters, compared to the Eclipse simulations. In addition, simulations where atmosphere and ocean are fully coupled had slightly smaller biases in aerosol levels compared to atmosphere-only simulations without nudging. Arctic BC, organic aerosol (OA), and SO2−4 burdens decrease significantly in all simulations by 10 %–60 % following the reductions of 7 %–78 % in emission projections, with the Eclipse ensemble showing larger reductions in Arctic aerosol burdens compared to the CMIP6 ensemble. For the 2030–2050 period, the Eclipse ensemble simulated a radiative forcing due to aerosol–radiation interactions (RFARI) of −0.39 ± 0.01 W/sq. m, which is −0.08 W/sq. m larger than the 1990–2010 mean forcing (−0.32 W/sq. m), of which −0.24 ± 0.01 W/sq. m was attributed to the anthropogenic aerosols. The CMIP6 ensemble simulated a RFARI of −0.35 to −0.40 W/sq. m for the same period, which is −0.01 to −0.06 W/sq. m larger than the 1990–2010 mean forcing of −0.35 W/sq. m. The scenarios with little to no mitigation (worst-case scenarios) led to very small changes in the RFARI, while scenarios with medium to large emission mitigations led to increases in the negative RFARI, mainly due to the decrease in the positive BC forcing and the decrease in the negative SO2−4 forcing. The anthropogenic aerosols accounted for −0.24 to −0.26 W/sq. m of the net RFARI in 2030–2050 period, in Eclipse and CMIP6 ensembles, respectively. Finally, all simulations showed an increase in the Arctic surface air temperatures throughout the simulation period. By 2050, surface air temperatures are projected to increase by 2.4 to 2.6 °C in the Eclipse ensemble and 1.9 to 2.6 °C in the CMIP6 ensemble, compared to the 1990–2010 mean. Overall, results show that even the scenarios with largest emission reductions leads to similar impact on the future Arctic surface air temperatures and sea-ice extent compared to scenarios with smaller emission reductions, implying reductions of greenhouse emissions are still necessary to mitigate climate change.

Aerosols↗

A Multi-Scale Inference, Estimation, and Prediction Engine for Earth System Modeling

We posit that AI methods can be leveraged to significantly enhance the predictive skill of forward Earth system modeling (ESM) activities. A hybrid framework incorporating traditional ESM modeling, inference methods, and AI techniques could make better use of both measured and computed information as well as computational resources by targeting inference tasks at program priorities, such as the predictability of precipitation extremes. This runtime pathway to closing the simulation/analysis-data/model improvement loop will streamline the traditional offline pathway to model improvement, which is based on domain science expertise, while suggesting guidance for further observations and measurements.

58 GEOSCIENCES↗

Scaling Global Warming Impacts on Ocean Ecosystems: Lessons From a Suite of Earth System Models

An important technique used by climate modelers to isolate the impacts of increasing greenhouse gasses on Earth System processes is to simulate the impact of an abrupt increase in carbon dioxide. The spatial pattern of change provides a “fingerprint” that is generally much larger than natural variability. Insofar as the response to radiative forcing is linear (the impact of quadrupling CO 2 is twice the impact of doubling CO 2 ) this fingerprint can then be used to estimate the impact of historical greenhouse gas forcing. However, the degree to which biogeochemical cycles respond linearly to radiative forcing has rarely been tested. In this paper, we evaluate which ocean biogeochemical fields are likely to respond linearly to changing radiative forcing, which ones do not, and where linearity breaks down. We also demonstrate that the representation of lateral mixing by mesoscale eddies, which varies significantly across climate models, plays an important role in modulating the breakdown of linearity. Globally integrated surface rates of biogeochemical cycling (primary productivity, particulate export) respond in a relatively linear fashion and are only moderately sensitive to mixing. By contrast, the habitability of the interior ocean (as determined by hypoxia and calcite supersaturation) behaves non-linearly and is very sensitive to mixing. This is because the deep ocean, as well as certain regions in the surface ocean, are very sensitive to the magnitude of deep wintertime convection. The cessation of convection under global warming is strongly modulated by the representation of eddy mixing.

54 ENVIRONMENTAL SCIENCES↗

Recreating the California New Year's Flood Event of 1997 in a Regionally Refined Earth System Model

Abstract The 1997 New Year's flood event was the most costly in California's history. This compound extreme event was driven by a category 5 atmospheric river that led to widespread snowmelt. Extreme precipitation, snowmelt, and saturated soils produced heavy runoff causing widespread inundation in the Sacramento Valley. This study recreates the 1997 flood using the Regionally Refined Mesh capabilities of the Energy Exascale Earth System Model (RRM‐E3SM) under prescribed ocean conditions. Understanding the processes causing extreme events informs practical efforts to anticipate and prepare for such events in the future, and also provides a rich context to evaluate model skill in representing extremes. Three California‐focused RRM grids, with horizontal resolution refinement of 14 km down to 3.5 km, and six forecast lead times, 28 December 1996 at 00Z through 30 December 1996 at 12Z, are assessed for their ability to recreate the 1997 flood. Planetary to synoptic scale atmospheric circulations and integrated vapor transport are weakly influenced by horizontal resolution refinement over California. Topography and mesoscale circulations, such as the Sierra barrier jet, are better represented at finer horizontal resolutions resulting in better estimates of storm total precipitation and storm duration snowpack changes. Traditional time‐series and causal analysis frameworks are used to examine runoff sensitivities state‐wide and above major reservoirs. These frameworks show that horizontal resolution plays a more prominent role in shaping reservoir inflows, namely the magnitude and time‐series shape, than forecast lead time, 2‐to‐4 days prior to the 1997 flood onset.

54 ENVIRONMENTAL SCIENCES↗

Modeling Atmospheric Brown Carbon in the GISS ModelE Earth System Model

Brown carbon (BrC) is an absorbing organic aerosol (OA), primarily emitted through biomass burning (BB), which exhibits light absorption unique to both black carbon (BC) and other organic aerosols. Despite many field and laboratory studies seeking to constrain BrC properties, the radiative forcing (RF) of BrC is still highly uncertain. To better understand its climate impact, we introduced BrC to the One-Moment Aerosol (OMA) module of the GISS ModelE Earth system model (ESM). We assessed ModelE sensitivity to primary BrC processed through a novel chemical aging scheme and to secondary BrC formed from biogenic volatile organic compounds (BVOCs). Initial results show that BrC typically contributes a top-of-the-atmosphere (TOA) radiative effect of 0.04 W m −2 . Sensitivity tests indicate that explicitly simulating BrC (separating it from other OAs), including secondary BrC, and simulating chemical bleaching of BrC contribute distinguishable radiative effects and should be accounted for in BrC schemes. This addition of prognostic BrC to ModelE allows greater physical and chemical complexity in OA representation with no apparent trade-off in model performance, as the evaluation of ModelE aerosol optical depth against Aerosol Robotic Network (AERONET) and Moderate Resolution Imaging Spectroradiometer (MODIS) retrieval data, with and without the BrC scheme, reveals similar skill in both cases. Thus, BrC should be explicitly simulated to allow more physically based chemical composition, which is crucial for more detailed OA studies like comparisons to in situ measurement campaigns. We include a summary of best practices for BrC representation within ModelE at the end of this paper.

brown carbon aerosols↗

PCMDI - An Earth System Model Evaluation Project Lawrence Livermore National Laboratory Annual Report

This annual report describes the activities of PCMDI – An Earth System Model Evaluation Project for the period November 1, 2019 – June 30, 2020. PCMDI is a project at Lawrence Livermore National Laboratory that is funded by the Climate and Environmental Sciences Division (CESD) of the Department of Energy. PCMDI is funded by two efforts within CESD: The Regional and Global Model Analysis program area (Dr. Renu Joseph, program manager) and the Atmospheric Systems Research program (Dr. Shaima Nasiri and Jeffrey Stehr, program managers). As instructed by Drs. Joseph, Nasiri, and Stehr, we provide an annual report addressing sections 4 (Progress and Plans) and 5 (Staffing and Budget Summary) of the SFA Program Management and Performance Reporting Criteria.

54 ENVIRONMENTAL SCIENCES↗

Machine-Learning-Assisted Hybrid Earth System Modelling

We propose a novel hybrid modeling approach that combines a physics-based, numerical model of the Earth system with a machine learning model. We also envision to integrate the hybrid model training with a data assimilation cycle, so that new observations update both the state estimate used as initial conditions and the machine learning model parameters.

58 GEOSCIENCES↗

Global Analysis, Interpretation and Modelling: An Earth Systems Modelling Program

The Goal of the GAIM is: To advance the study of the coupled dynamics of the Earth system using as tools both data and models; to develop a strategy for the rapid development, evaluation, and application of comprehensive prognostic models of the Global Biogeochemical Subsystem which could eventually be linked with models of the Physical-Climate Subsystem; to propose, promote, and facilitate experiments with existing models or by linking subcomponent models, especially those associated with IGBP Core Projects and with WCRP efforts. Such experiments would be focused upon resolving interface issues and questions associated with developing an understanding of the prognostic behavior of key processes; to clarify key scientific issues facing the development of Global Biogeochemical Models and the coupling of these models to General Circulation Models; to assist the Intergovernmental Panel on Climate Change (IPCC) process by conducting timely studies that focus upon elucidating important unresolved scientific issues associated with the changing biogeochemical cycles of the planet and upon the role of the biosphere in the physical-climate subsystem, particularly its role in the global hydrological cycle; and to advise the SC-IGBP on progress in developing comprehensive Global Biogeochemical Models and to maintain scientific liaison with the WCRP Steering Group on Global Climate Modelling.

Moore, Berrien, III↗

Atmospheric Constituents in GEOS-5: Components for an Earth System Model

The GEOS-S model is being developed for weather and climate processes, including the implementation of "Earth System" components. While the stratospheric chemistry capabilities are mature, we are presently extending this to include predictions of the tropospheric composition and chemistry - this includes CO2, CH4, CO, nitrogen species, etc. (Aerosols are also implemented, but are beyond the scope of this paper.) This work will give an overview of our chemistry modules, the approaches taken to represent surface emissions and uptake of chemical species, and some studies of the sensitivity of the atmospheric circulation to changes in atmospheric composition. Results are obtained through focused experiments and multi-decadal simulations.

Pawson, Steven↗