Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXACT SOLUTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Buckling of imperfect periodic lattice structures

A simplified buckling analysis is presented for a family of periodic lattice structures such as those proposed for large space structures. A transcendental 6 x 6 matrix of eigenvalues is shown to be sufficient for modeling buckling behavior because member stiffnesses are based on an exact solution of the beam-column equation. Exact stiffnesses are derived for a curved member, thus allowing modeling of imperfect lattice structures. Comparisons of predictions of the lattice model with those available from shell and beam theory underscore the inaccuracies introduced by treating the lattice structure as a continuum. Sample calculations are provided for an isogrid cylinder and a three element double-laced truss.

Anderson, M. S.↗
NASA NTRS1985

Construction of approximate analytical solutions to a new class of non-linear oscillator equation

The principle of harmonic balance is invoked in the development of an approximate analytic model for a class of nonlinear oscillators typified by a mass attached to a stretched wire. By assuming that harmonic balance will hold, solutions are devised for a steady state limit cycle and/or limit point motion. A method of slowly varying amplitudes then allows derivation of approximate solutions by determining the form of the exact solutions and substituting into them the lowest order terms of their respective Fourier expansions. The latter technique is actually a generalization of the method proposed by Kryloff and Bogoliuboff (1943).

Mickens, R. E.↗
NASA NTRS1986

An efficient method for solving the steady Euler equations

An efficient numerical procedure for solving a set of nonlinear partial differential equations, the steady Euler equations, using Newton's linearization procedure is presented. A theorem indicating quadratic convergence for the case of differential equations is demonstrated. A condition for the domain of quadratic convergence Omega(2) is obtained which indicates that whether an approximation lies in Omega(2) depends on the rate of change and the smoothness of the flow vectors, and hence is problem-dependent. The choice of spatial differencing, of particular importance for the present method, is discussed. The treatment of boundary conditions is addressed, and the system of equations resulting from the foregoing analysis is summarized and solution strategies are discussed. The convergence of calculated solutions is demonstrated by comparing them with exact solutions to one and two-dimensional problems.

Liou, M.-S.↗
NASA NTRS1986

Complex and singular solutions of KdV and MKdV equations

The Korteweg-de Vries (KdV) and the modified Korteweg-de Vries (MKdV) equations are shown to have, besides the regular real solutions, exact regular complex as well as singular solutions. The singular solution for the KdV is real but for the MKdV it is pure imaginary. Implications of the complex solutions are discussed.

Buti, B.↗
NASA NTRS1998

Parallel 3D Multi-Stage Simulation of a Turbofan Engine

A 3D multistage simulation of each component of a modern GE Turbofan engine has been made. An axisymmetric view of this engine is presented in the document. This includes a fan, booster rig, high pressure compressor rig, high pressure turbine rig and a low pressure turbine rig. In the near future, all components will be run in a single calculation for a solution of 49 blade rows. The simulation exploits the use of parallel computations by using two levels of parallelism. Each blade row is run in parallel and each blade row grid is decomposed into several domains and run in parallel. 20 processors are used for the 4 blade row analysis. The average passage approach developed by John Adamczyk at NASA Lewis Research Center has been further developed and parallelized. This is APNASA Version A. It is a Navier-Stokes solver using a 4-stage explicit Runge-Kutta time marching scheme with variable time steps and residual smoothing for convergence acceleration. It has an implicit K-E turbulence model which uses an ADI solver to factor the matrix. Between 50 and 100 explicit time steps are solved before a blade row body force is calculated and exchanged with the other blade rows. This outer iteration has been coined a "flip." Efforts have been made to make the solver linearly scaleable with the number of blade rows. Enough flips are run (between 50 and 200) so the solution in the entire machine is not changing. The K-E equations are generally solved every other explicit time step. One of the key requirements in the development of the parallel code was to make the parallel solution exactly (bit for bit) match the serial solution. This has helped isolate many small parallel bugs and guarantee the parallelization was done correctly. The domain decomposition is done only in the axial direction since the number of points axially is much larger than the other two directions. This code uses MPI for message passing. The parallel speed up of the solver portion (no 1/0 or body force calculation) for a grid which has 227 points axially.

Turner, Mark G.↗
NASA NTRS2005

Multi-Dimensional Spectral Difference Method for Unstructured Grids

A new, high-order, conservative, and efficient method for conservation laws on unstructured grids is developed. It combines the best features of structured and unstructured grid methods to attain computational efficiency and geometric flexibility; it utilizes the concept of discontinuous and high-order local representations to achieve conservation and high accuracy; and it is based on the finite-difference formulation for simplicity. Universal reconstructions are obtained by distributing unknowns in a geometrically similar manner for all unstructured cells. Placements of the unknown and flux points with various order of accuracy are given for the line, triangular and tetrahedral elements. The data structure of the new method permits an optimum use of cache memory, resulting in further computational efficiency on modern computers. A new pointer system is developed that reduces memory requirements and simplifies programming for any order of accuracy. Numerical solutions are presented and compared with the exact solutions for wave propagation problems in both two and three dimensions to demonstrate the capability of the method. Excellent agreement has been found. The method is simpler and more efficient than previous discontinuous Galerkin and spectral volume methods for unstructured grids.

Liu, Yen↗
DOE OSTI2020

Energy density and spectrum of single-cycle and sub-cycle electromagnetic pulses

Based on the exact solution of the Maxwell equations in the form of a collapsing spherical vector wave specified by an arbitrary function of time, we have calculated the maximum energy density that can be achieved when focusing extremely short pulses of various shapes. It is shown that our earlier formula expressing the maximum energy density in terms of the spectrum parameters for Gaussian quasi-monochromatic pulses is approximately (with an accuracy of ±40 %) valid for the main types of extremely short pulses. (extremely short laser pulses)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Benchmarking the multiconfigurational Hartree method by the exact wavefunction of two harmonically trapped bosons with contact interaction

Highlights: • Comparison of exact and numerical single-particle density matrices. • Benchmark for multiconfigurational Hartree. • Convergence for large number of orbitals. We consider two bosons in a one-dimensional harmonic trap, interacting by a contact potential, and compare the exact solution of this problem to a self-consistent numerical solution by using the multiconfigurational time-dependent Hartree (MCTDH) method. We thereby benchmark the predictions of the MCTDH method with a few-body problem that has an analytical solution for the most commonly experimentally realized interaction potential in ultracold quantum gases. It is found that exact ground state energy and first order correlations are accurately reproduced by MCTDH up to the intermediate dimensionless coupling strengths corresponding to typical background scattering lengths of magnetically trapped ultracold dilute Bose gases. For larger couplings, established for example by (a combination of) Feshbach resonances and optical trapping, the MCTDH approach overestimates the depth of the trap-induced correlation dip of first order correlations in position space, as well as overestimates the fragmentation, defined as the average relative occupation of orbitals other than the energetically lowest one. We anticipate that qualitatively similar features in the correlation function may arise for larger particle numbers, paving the way for a quantitative assessment of the accuracy of MCTDH by experiments with ultracold atoms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Accurate localization of Kosterlitz-Thouless-type quantum phase transitions for one-dimensional spinless fermions

We investigate the charge-density wave (CDW) transition for one-dimensional spinless fermions at half band filling with nearest-neighbor electron transfer amplitude t and interaction V. The model is equivalent to the anisotropic XXZ Heisenberg model for which the Bethe Ansatz provides an exact solution. For V>V c =2t, the CDW order parameter and the single-particle gap are finite but exponentially small, as is characteristic for a Kosterlitz-Thouless transition. It is notoriously difficult to locate such infinite-order phase transitions in the phase diagram using approximate analytical and numerical approaches. Second-order Hartree-Fock theory is qualitatively applicable for all interaction strengths, and predicts the CDW transition to occur at V$^{(2)}_{c,2}$≈1.5t. Second-order Hartree Fock theory is almost variational because the density of quasiparticle excitations is small. We apply the density-matrix renormalization group (DMRG) for periodic boundary conditions for system sizes up to 514 sites, which permits a reliable extrapolation of all physical quantities to the thermodynamic limit, apart from the critical region. We investigate the ground-state energy, the gap, the order parameter, the momentum distribution, the quasiparticle density, and the density-density correlation function to locate V c from the DMRG data. In conclusion, tracing the breakdown of the Luttinger liquid and the peak in the quasiparticle density at the band edge permits us to reproduce V c with an accuracy of one percent.

1-dimensional spin chains↗
NASA NTRS1971

An exact closed form solution for constant area compressible flow with friction and heat transfer

The well-known differential equation for the one-dimensional flow of a compressible fluid with heat transfer and wall friction has no known solution in closed form for the general case. This report presents a closed form solution for the special case of constant heat flux per unit length and constant specific heat. The solution was obtained by choosing the square of a dimensionless flow parameter as one of the independent variables to describe the flow. From this exact solution, an approximate simplified form is derived that is applicable for predicting subsonic flow performance characteristics for many types of constant area passages in internal flow. The data included in this report are considered sufficiently accurate for use as a guide in analyzing and designing internal gas flow systems.

Sturas, J. I.↗
NASA NTRS1974

A comparison of numerical solutions to the inviscid equations of fluid motion

The second-order MacCormack method and the third-order Rusanov and Kutler-Warming-Lomax methods are applied to the inviscid 1-d Burgers' equation, wedge flow, and the problem of shock reflection from a rigid boundary. The numerical solution in each case is compared to the exact solution and the quantitative estimates of accuracy are obtained. Results of this study show that the third-order Kutler-Warming-Lomax or the Rusanov methods tuned for minimum dissipation or minimum dispersion provide the most accurate solution in each of the examples considered.

Anderson, D. A.↗
NASA NTRS1995

Investigation of computational and spectral analysis methods for aeroacoustic wave propagation

Most computational fluid dynamics (CFD) schemes are not adequately accurate for solving aeroacoustics problems, which have wave amplitudes several orders of magnitude smaller yet with frequencies larger than the flow field variations generating the sound. Hence, a computational aeroacoustics (CAA) algorithm should have minimal dispersion and dissipation features. A dispersion relation preserving (DRP) scheme is, therefore, applied to solve the linearized Euler equations in order to simulate the propagation of three types of waves, namely: acoustic, vorticity, and entropy waves. The scheme is derived using an optimization procedure to ensure that the numerical derivatives preserve the wave number and angular frequency of the partial differential equations being discretized. Consequently, simulated waves propagate with the correct wave speeds and exhibit their appropriate properties. A set of radiation and outflow boundary conditions, compatible with the DRP scheme and derived from the asymptotic solutions of the governing equations, are also implemented. Numerical simulations are performed to test the effectiveness of the DRP scheme and its boundary conditions. The computed solutions are shown to agree favorably with the exact solutions. The major restriction appears to be that the dispersion relations can be preserved only for waves with wave lengths longer than four or five spacings. The boundary conditions are found to be transparent to the outgoing disturbances. However, when the disturbance source is placed closer to a boundary, small acoustic reflections start appearing. CAA generates enormous amounts of temporal data which needs to be reduced to understand the physical problem being simulated. Spectral analysis is one approach that helps us in extracting information which often can not be easily interpreted in the time domain. Thus, three different methods for the spectral analysis of numerically generated aeroacoustic data are studied. First, the capabilities of two traditional methods for spectral analysis, namely, the Blackman-Tukey method and periodogram method, are compared in estimating the spectra of a simple-periodic process. The periodogram is then applied to analyze transitory-deterministic processes. Finally, these two methods are compared with a more recent method, referred as the Weighted-Overlapped-Segment-Averaging (WOSA) method, in estimating the spectra of a chaotic (random-like) process. From the demonstrative case for the spectral analyses of data generated by simple-periodic process, the periodogram method is found to give a better estimate of the steep-sloped spectra than the Blackman-Tukey method. Also, for this problem, the Hanning window is found to perform better with the periodogram method than with the Blackman-Tukey method. Finally, for the spectral analysis of data generated by the chaotic process, the periodogram method does not perform well, whereas, the WOSA and Blackman-Tukey methods give equivalently good results.

Vanel, Florence O.↗
DOE OSTI2024

Nonlinear Poisson–Boltzmann solutions for charged parallel plates: When opposite charges repel

I present an exact solution of the Poisson–Boltzmann equation for two parallel plates and discuss the solution properties. I discuss in more detail plates with opposite charges: In this case, there are two critical separations, L c,1 < L c,2 . For separations less than L c,1 , the force between plates is repulsive. It switches to attractive at L c,1 , but with the electric potential having the same sign on both plates. For L > L c,2 , the force remains attractive, and the potential at the plates has the same sign as the charge on each plate. I also describe charge regulation, determined by pK a , and provide formulas for both the critical distance where oppositely charged plates repel and their charging process. Finally, the implications of these results for the nanoparticle assembly, as driven by electrostatic interactions, are also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Exact multi-instanton solutions to self-dual Yang–Mills equation on curved spaces

We find exact multi-instanton solutions to the self-dual Yang–Mills equation on a large class of curved spaces with SO(3) isometry, generalizing the results previously found on R 4 . Here, the solutions are featured with explicit multi-centered expressions and topological properties. As examples, we demonstrate the approach on several different curved spaces, including the Einstein static universe and R × dS$^{E}_{3}$, and show that the exact multi-instanton solutions exist on these curved backgrounds.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Sensitivity analysis of a layered piezoelectric system using ZFEM

The complex variable finite element method (ZFEM) is a numerical technique which aims to find the partial derivatives of the independent variables with respect to variation in dependent parameters declared in the physics. This is done by combining the complex Taylor series expansion within the weak formulation of the governing equation in a coupled system of linear equations forming a complex valued block matrix given by the Cauchy–Riemann matrix representation. In this work, two-dimensional linear first-order elements have been implemented in ZFEM to predict the design derivatives of the mechanical displacement field and the voltage potential field for a layered piezoelectric system in a steady-state study with Dirichlet boundary condition applied at the top and bottom edges of the geometry. This approach allows the standard FEM solution to quantify the sensitivity of the mechanical displacement and voltage potential fields with respect to small variations in the material properties through the information obtained from the computation of the derivatives. The domain is formed by a layered body with PZT-4 and PZT-5 stacked together. For result verification, the numerical solution obtained with ZFEM was compared to results from a commercial FEM package and the solution from the imaginary part was compared to the exact solution of a well-known benchmark problem. In conclusion, comparison of the results showed good agreement for both the real and imaginary parts of the solution and the largest sensitivities were found in PZT-5 specifically in C 13 , C 33 , and ε 33 .

42 ENGINEERING↗
NASA NTRS1985

A study of internal and distributed damping for vibrating turbomachiner blades

Internal and distributed damping as possible methods for reducing the vibration response of turbomachine blades and theoretical methods for analyzing damped vibration were studied. It is demonstrated how the Ritz-Galerkin methods may be used to straightforwardly to analyze forced vibrations with damping. This is done directly without requiring the free vibration eigenfunctions. The Galerkin method is an effective technique for these types of problems. The Ritz method has the further advantage of not needing to satisfy the force type boundary conditions, which is particularly important for plates and shells. But proper functionals representing the forcing and damping terms must be developed, and this is done. Two types of damping--viscous and material (hysteretic) are considered. Both distributed and concentrated exciting forces are treated. Numerical results are obtained for cantilevered beams and rectangular plates. Studies showing the rates of convergence of the solutions are made. In the case of the cantilever beam, approximate solutions from the present methods are compared with the exact solutions.

Leissa, A. W.↗
NASA NTRS1984

Extensions of the Ritz-Galerkin method for the forced, damped vibrations of structural elements

The Ritz-Galerkin methods were used to obtain approximate solutions for free undamped, vibration problems. It is demonstrated that these same methods may be used straightforwardly to analyze forced vibrations with damping without requiring the free vibration eigenfunctions. It was shown that the Galerkin method is an effective technique for these types of problems. The Ritz method has the advantage that it does not need to satisfy the force-type boundary conditions, which is particularly important for plates and shells. Proper functionals representing the forcing and damping terms were developed. Two types of damping--viscous and material (hysteretic) are discussed. Distributed and concentrated exciting forces are treated. Numerical results are obtained for cantilevered beams and rectangular plates. The rates of convergence of the solutions are shown. Approximate solutions from the present methods are compared with the exact solutions for the cantilever beam.

Leissa, A. W.↗