Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dynamic Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Dynamic Modelling of HiveWind Floating Wind Substructure in OpenFAST

Current aero-elastic modes tend to consider the wind turbine floating substructures as rigid. However, the new generation of offshore wind platforms are leaner, less rigid. The OpenFAST code has been updated to consider the flexibility of the floating substructure. This presentation shows how a numerical model of the HiveWind design was created within OpenFAST as well as some verifications performed. When comparing the flexible model to a simplified rigid model (previous state-of-the-art), there are some significant differences in key performance indicators. The new flexibility capability within OpenFAST allows to calculate ultimate and fatigue loads within the floating substructure, allowing for the development of more economical designs.

ENGINEERING,WIND ENERGY↗
DOE OSTI2024

Dynamic Modeling of Power Conversion Stages for an Exascale Supercomputer

In this paper a power conversion and energy consumption model for an exascale supercomputer is investigated. Power consumption, energy loss and efficiency are derived for the 27.2 MW liquid-cooled, centralized, High Performance Computing (HPC) power system, which is supplied directly from the 480 V three-phase mains. Two energy conversion stages are analyzed, measured and modeled. The model is developed in order to be adapted and implemented in a digital twin platform utilizing a Resource Allocator and Power Simulator (RAPS) module. RAPS enables estimation of potential energy savings in the direct AC power supply architecture via both conventional rectifier load sharing (commonly used in HPC systems), as well as smart rectifier load sharing. Moreover, besides the direct AC supply architecture analysis, the full direct DC supply architecture with with 1 kV DC bus were also studied. Comparison of 10 hour time frame operation of the system, with direct 480 V AC voltage supply with conventional and smart load sharing and medium dc voltage supply were done. For the direct AC supply architecture, with conventional and smart load sharing the predicted power loss was approximately 840 kW and 820 kW, respectively and the predicted total system efficiency was 92.87% and 93.05%, respectively. For the direct DC supply architecture with the 1000 V DC supply bus power loss was approximately 340 kW and the predicted total system efficiency was 97.02%.

Wojda, Rafal↗
DOE OSTI2021

Discrete Empirical Interpolation Method Based Dynamic Load Model Reduction

Dynamic load models add significant complexity to bulk power system time-domain simulations. The complexity is due to the large number of ordinary differential equations (ODEs) introduced by the dynamic load components such as induction motors. It is challenging to derive reduced-order models (ROMs) for dynamic loads due to the nonlinear functions in their governing equations. This paper applies the discrete empirical interpolation method enhanced proper orthogonal decomposition (DEIM-POD) to approximate the full dynamic load model with the ROM that minimizes the projection error of the nonlinear functions in dynamic load ODEs onto their dominant modes. This approach only requires evaluation of nonlinear functions at selected observation points. The observation points selected by DEIM also provide information for screening critical load buses where dynamic load model parameters contribute the most to the accuracy of ROM across multiple contingencies. The proposed approach is validated on IEEE 9-bus, WECC 179-bus and 2384-bus Polish systems.

bulk power system↗
DOE OSTI2025

Hidden-strangeness tetraquarks in the dynamical diquark model

The dynamical diquark model describes multiquark exotic hadrons in terms of diquark components nucleated by heavy quarks and successfully explains multiple features of hidden-charm and hidden-bottom exotics. Here, we apply the model to the marginally heavy case of hidden-strange states to probe whether mesons near 2 GeV with peculiar properties, such as 𝜙⁡(2170), 𝑓 2 ⁡(2340), and 𝑋⁡(2370), are possible tetraquark candidates. We calculate spin-multiplet average masses using potentials obtained through lattice simulations and quark models, and we also describe the detailed spectra of the expected multiplets as a diagnostic to discern the nature of future hadrons likely to be discovered in this mass region by experiments at facilities such as BESIII, JLab, and the EIC.

Bound states↗
DOE OSTI2022

A new dynamic zOnal model with air-diffuser (DOMA) - Application to thermal comfort prediction

A new Dynamic zOnal Model with Air-diffuser (DOMA) was developed. Several case studies were investigated and tested to evaluate and validate this program using measurement data. This new model was integrated into a TRaNsient SYstems Simulation program library and coupled with the multi-zone thermal model. The DOMA/TRNSYS coupled model was then used to predict room temperature distribution over an entire day of a single-zone building. The results show that increasing the heating outputs of the electric floor system, for example, from 75 to 200 W/m 2 , would not effectively improve the indoor thermal comfort, since the thermostat will reach the set point first and then turn off the system before the room gets enough heat and reach a comfortable level. This indicates the importance of selecting an appropriate location and set point for the thermostat when using a floor heating system. This potential thermal comfort issue can only be identified through the two-node model with a dynamic zonal model rather than the conventional PMV model, which thus suggests that for optimizing indoor thermal comfort of a building equipped with a time-sensitive control strategy and/or HVAC system, the TSENS results obtained from the two-node model integrated with DOMA are more appropriate than PMVs.

Construction & Building Technology↗
DOE OSTI2021

Dynamic Rupture Modeling of the M7.1, 2019 Ridgecrest, California, Earthquake

An important part of the simulation technique implemented in the strong motion prediction recipe developed in Japan, originally proposed by Irikura and Miyake (2011) is the earthquake rupture characterization that is based on established empirical scaling relationships between source parameters and seismic moment. These scaling relationships and rupture characterization are derived from recorded data and are tested by simulations. Recent analysis of results obtained with the Recipe for the 2016 M7.1 Kumamoto earthquake performed by several researchers, indicate that in order to reproduce near-fault long-period ground motions with permanent displacements, typical for earthquakes with surface rupturing, the recipe needs modifications. In particular, improvements are required in characterizing the rupture kinematics at shallow depths, above the seismogenic zone (Irikura et al., 2019). Modeling of rupture dynamics for recorded earthquakes, and numerical simulations for different rupture scenarios, provides physical constrains on slip evolution in time and space, which can be used in adjustments of empirical source scaling relationships for large crustal earthquakes. In this study we mainly focused on rupture dynamics modeling of the 2019 M7 Ridgecrest, California earthquake. The characterization of the kinematic rupture model derived from the dynamic rupture models of this earthquake can inform further refinements of rupture modeling proposed by the Recipe. Through different rupture scenarios we investigated potential relationships between characteristics of Long Period Ground Motion Generation Area (LMGA), used in the Recipe, and asperity depth and rupture initiation.

58 GEOSCIENCES↗
DOE OSTI2022

Parametric dynamic mode decomposition for reduced order modeling

Dynamic Mode Decomposition (DMD) is a model-order reduction approach, whereby spatial modes of fixed temporal frequencies are extracted from numerical or experimental data sets. The DMD low-rank or reduced operator is typically obtained by singular value decomposition of the temporal data sets. For parameter-dependent models, as found in many multi-query applications such as uncertainty quantification or design optimization, the only parametric DMD technique developed was a stacked approach, with data sets at multiple parameter values were aggregated together, increasing the computational work needed to devise low-rank dynamical reduced-order models. Here in this paper, we present two novel approach to carry out parametric DMD: one based on the interpolation of the reduced-order DMD eigen-pair and the other based on the interpolation of the reduced DMD (Koopman) operator. Numerical results are presented for diffusion-dominated nonlinear dynamical problems, including a multiphysics radiative transfer example. All three parametric DMD approaches are compared.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Learning compact physics‐aware delayed photocurrent models using dynamic mode decomposition

Abstract Radiation‐induced photocurrent in semiconductor devices can be simulated using complex physics‐based models, which are accurate, but computationally expensive. This presents a challenge for implementing device characteristics in high‐level circuit simulations where it is computationally infeasible to evaluate detailed models for multiple individual circuit elements. In this work we demonstrate a procedure for learning compact delayed photocurrent models that are efficient enough to implement in large‐scale circuit simulations, but remain faithful to the underlying physics. Our approach utilizes dynamic mode decomposition (DMD), a system identification technique for learning reduced‐order discrete‐time dynamical systems from time series data based on singular value decomposition. To obtain physics‐aware device models, we simulate the excess carrier density induced by radiation pulses by solving numerically the ambipolar diffusion equation, then use the simulated internal state as training data for the DMD algorithm. Our results show that the significantly reduced‐order delayed photocurrent models obtained via this method accurately approximate the dynamics of the internal excess carrier density—which can be used to calculate the induced current at the device boundaries—while remaining compact enough to incorporate into larger circuit simulations.

Hanson, Joshua↗
DOE OSTI2023

Plant-specific Model and Data Analysis using Dynamic Security Modeling and Simulation

The requirements for U.S. nuclear power plants to maintain a large on-site physical security force contribute to their high operational costs. The cost of maintaining the current physical security posture is approximately 10% of the overall operation and maintenance budget for commercial nuclear power plants. The goal of the Light Water Reactor Sustainability (LWRS) program’s physical security pathway is to develop tools, methods, and technologies and provide the technical basis for an optimized physical security posture. The conservatisms built into current security postures may be analyzed and minimized in order to reduce security costs while still ensuring adequate security and operational safety. The research performed at Idaho National Laboratory within LWRS program’s physical security pathway has successfully developed a dynamic force-on-force modeling framework using various computer simulation tools and integrating them with the dynamic assessment Event Modeling Risk Assessment using Linked Diagrams (EMRALD) tool. This document provides an update on the progress in applying a dynamic computational framework that links results from a commercially available force-on-force simulation tool, a commercially available thermal-hydraulic tool, and EMRALD to an operating commercial nuclear power plant. This report is only a summary of the progress and does not contain specific modeling results as those contain sensitive security information. This process of including plant procedures and multiple analysis results is being called Modeling and Analysis for Safety Security using Dynamic EMRALD Framework or MASS-DEF. Previous reports described how a user could integrate their plant-specific force-on-force models with the dynamic simulation tool EMRALD, model operator actions, integrate with probabilistic risk assessment tools, such as CAFTA (Computer Aided Fault Tree Analysis System) or SAPHIRE (Systems Analysis Programs for Hands-on Integrated Reliability Evaluations), and with thermal-hydraulic tools, such as RELAP-5. Previous reports applied various combinations of available simulations codes with EMRALD using generic plant models to demonstrate how to perform the analysis. This report documents the results of applying the dynamic computational framework to an actual nuclear facility using their security scenarios and timelines. This report does not contain any plant's sensitive information and/or Safeguards Information. The purpose of this study was to verify that results achieved using generic models are similar to actual plant results and to refine our guidance on the use of the framework. This assessment enables further analysis, such as what-if scenarios and staff-reduction evaluation, thereby optimizing physical security at plants.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

Applying Particle Swarm Optimization and Extended Kalman Filtering to Model Kaplan Generation Dynamics for Hydropower Systems

Variable renewable generation is increasing the need for hydropower plants to provide fast and flexible grid support, which places new demands on plant-level dynamic models used for monitoring, control, and operational decision-making. This need is especially important for hydroelectric systems, where turbine and generator dynamics are strongly coupled, nonlinear, and time-varying, making accurate real-time representation difficult. To address this problem, this paper develops a digital twin (DT) framework for a synchronous generator–Kaplan turbine system using an explicit separation of slow turbine dynamics and fast generator dynamics. The turbine subsystem is represented by a six-coefficient model, whose parameters are identified offline using particle swarm optimization, while the generator subsystem is updated online through an extended Kalman filter for real-time state and parameter estimation. These models are integrated within a closed-loop simulation that includes a proportional–integral–derivative–double-derivative governor and excitation system, allowing the DT to track plant behavior under realistic operating conditions. Unlike prior studies that treat turbine and generator modeling separately or rely mainly on simulated inputs, the proposed framework is validated using real operational data from a hydropower plant. Results show that the DT reproduces terminal voltage, active power, and reactive power with a normalized root mean square error of approximately 5%. This hybrid offline–online formulation constitutes the main contribution of the work, providing an adaptive and practically deployable DT for hydropower systems with direct relevance to control improvement, performance monitoring, and grid-support applications under high renewable penetration.

13 HYDRO ENERGY↗
DOE OSTI2025

Moving beyond post hoc explainable artificial intelligence: a perspective paper on lessons learned from dynamical climate modeling

AI models are criticized as being black boxes, potentially subjecting climate science to greater uncertainty. Explainable artificial intelligence (XAI) has been proposed to probe AI models and increase trust. In this review and perspective paper, we suggest that, in addition to using XAI methods, AI researchers in climate science can learn from past successes in the development of physics-based dynamical climate models. Dynamical models are complex but have gained trust because their successes and failures can sometimes be attributed to specific components or sub-models, such as when model bias is explained by pointing to a particular parameterization. We propose three types of understanding as a basis to evaluate trust in dynamical and AI models alike: (1) instrumental understanding, which is obtained when a model has passed a functional test; (2) statistical understanding, obtained when researchers can make sense of the modeling results using statistical techniques to identify input–output relationships; and (3) component-level understanding, which refers to modelers' ability to point to specific model components or parts in the model architecture as the culprit for erratic model behaviors or as the crucial reason why the model functions well. We demonstrate how component-level understanding has been sought and achieved via climate model intercomparison projects over the past several decades. Such component-level understanding routinely leads to model improvements and may also serve as a template for thinking about AI-driven climate science. Currently, XAI methods can help explain the behaviors of AI models by focusing on the mapping between input and output, thereby increasing the statistical understanding of AI models. Yet, to further increase our understanding of AI models, we will have to build AI models that have interpretable components amenable to component-level understanding. We give recent examples from the AI climate science literature to highlight some recent, albeit limited, successes in achieving component-level understanding and thereby explaining model behavior. The merit of such interpretable AI models is that they serve as a stronger basis for trust in climate modeling and, by extension, downstream uses of climate model data.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Short-lead seasonal precipitation forecast in northeastern Brazil using an ensemble of artificial neural networks

This study assesses the deterministic and probabilistic forecasting skill of a 1-month-lead ensemble of Artificial Neural Networks (EANN) based on low-frequency climate oscillation indices. The predictand is the February-April (FMA) rainfall in the Brazilian state of Ceará, which is a prominent subject in climate forecasting studies due to its high seasonal predictability. Additionally, the study proposes combining the EANN with dynamical models into a hybrid multi-model ensemble (MME). The forecast verification is carried out through a leave-one-out cross-validation based on 40 years of data. The EANN forecasting skill is compared with traditional statistical models and the dynamical models that compose Ceará’s operational seasonal forecasting system. A spatial comparison showed that the EANN was among the models with the smallest Root Mean Squared Error (RMSE) and Ranked Probability Score (RPS) in most regions. Moreover, the analysis of the area-aggregated reliability showed that the EANN is better calibrated than the individual dynamical models and has better resolution than Multinomial Logistic Regression for above-normal (AN) and below-normal (BN) categories. It is also shown that combining the EANN and dynamical models into a hybrid MME reduces the overconfidence of the extreme categories observed in a dynamically-based MME, improving the reliability of the forecasting system.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Dynamic Phasor Modeling of Various Multipulse Rectifiers and a VSI Fed by 18-Pulse Asymmetrical Autotransformer Rectifier Unit for Fast Transient Analysis

To study the fast modelling of dynamic characteristics caused by power electronic switching, the dynamic phasor (DP) theory based on the time-varying Fourier decomposition and frequency shifting is firstly applied to the modelling of various multipulse rectifiers. The DP model for symmetrical 12-pulse phase-shifting reactor rectifier unit (PSR-RU) is derived with model order reduction, relations between ac and dc terminals, and Taylor series expansion. The DP model of asymmetrical 18-pulse autotransformer rectifier unit (AT-RU) is proposed based on the switching functions expressed in the DP domain. Meanwhile, the DP model of voltage source inverter (VSI) fed by asymmetrical 18-pulse AT-RU is built with the harmonic state-space (HSS) equations. Under both balanced and unbalanced conditions, the good calculation accuracy and rapid simulation speed of the developed DP models are validated by the detailed time-domain (TD) simulation.

42 ENGINEERING↗
DOE OSTI2023

Dynamic model-based feature extraction for fault detection and diagnosis of a supermarket refrigeration system

With the increasing concerns over climate change and carbon emissions, fault detection and diagnostics (FDD) of low–global warming potential (GWP) refrigerant supermarket refrigeration systems has gained great attention from academic and industrial sectors. Various FDD approaches have been developed to detect, identify, and diagnose faults to save energy, improve food quality, and protect the environment. Here, to mitigate the difficulty of collecting high-quality steady-state operational data in field operations faced by most model-based FDD methods, this study developed dynamic models of a low–GWP refrigerant (CO 2 ) supermarket refrigeration system. The model accuracy was validated using manufacturer data and experimental data. Simulations were conducted to predict the system dynamic response under two common operational faults—evaporator air path blockage fault and the display case door open fault—to identify fault patterns and define key dynamic behavior indexes for supporting FDD algorithm development.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

A dynamic kinetic model captures cell-free metabolism for improved butanol production

Cell-free systems are useful tools for prototyping metabolic pathways and optimizing the production of various bioproducts. Mechanistically-based kinetic models are uniquely suited to analyze dynamic experimental data collected from cell-free systems and provide vital qualitative insight. However, to date, dynamic kinetic models have not been applied with rigorous biological constraints or trained on adequate experimental data to the degree that they would give high confidence in predictions and broadly demonstrate the potential for widespread use of such kinetic models. In this work, we construct a large-scale dynamic model of cell-free metabolism with the goal of understanding and optimizing butanol production in a cell-free system. Using a combination of parameterization methods, the resultant model captures experimental metabolite measurements across two experimental conditions for nine metabolites at timepoints between 0 and 24 hours. Here, we present analysis of the model predictions, provide recommendations for butanol optimization, and identify the aldehyde/alcohol dehydrogenase as the primary bottleneck in butanol production. Sensitivity analysis further reveals the extent to which various parameters are constrained, and our approach for probing valid parameter ranges can be applied to other modeling efforts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Arbitrary Order Virtual Element Methods for High‐Order Phase‐Field Modeling of Dynamic Fracture

ABSTRACT Accurate modeling of fracture nucleation and propagation in brittle and ductile materials subjected to dynamic loading is important in predicting material damage and failure under extreme conditions. Phase‐field fracture models have garnered a lot of attention in recent years due to their success in representing damage and fracture processes in a wide class of materials and under a variety of loading conditions. Second‐order phase‐field fracture models are by far the most popular among researchers (and increasingly, among practitioners), but fourth‐order models have started to gain broader acceptance since their more recent introduction. The exact solution corresponding to these high‐order phase‐field fracture models has higher regularity. Thus, numerical solutions of the model equations can achieve improved accuracy and higher spatial convergence rates. In this work, we develop a virtual element framework for the high‐order phase‐field model of dynamic fracture. The virtual element method (VEM) can be regarded as a generalization of the classical finite element method. In addition to many other desirable characteristics, the VEM allows computing on polytopal meshes. Here, we use ‐conforming virtual elements and the generalized‐ time integration method for the momentum balance equation, and adopt ‐conforming virtual elements for the high‐order phase‐field equation. We verify our virtual element framework using classical quasi‐static benchmark problems and demonstrate its capabilities with the aid of numerical simulations of dynamic fracture in brittle materials.

42 ENGINEERING↗
DOE OSTI2025

The Water Table Model (WTM) (v2.0.1): coupled groundwater and dynamic lake modelling

Abstract. Ice-free land comprises 26 % of the Earth's surface and holds liquid water that delineates ecosystems, affects global geochemical cycling, and modulates sea levels. However, we currently lack the capacity to simulate and predict these terrestrial water changes across the full range of relevant spatial (watershed to global) and temporal (monthly to millennial) scales. To address this knowledge gap, we present the Water Table Model (WTM), which integrates coupled components to compute dynamic lake and groundwater levels. The groundwater component solves the 2D horizontal groundwater flow equation using non-linear equation solvers from the C++ PETSc (Portable, Extensible Toolkit for Scientific Computation) library. The dynamic lake component makes use of the Fill–Spill–Merge (FSM) algorithm to move surface water into lakes, where it may evaporate or affect groundwater flow. In a proof-of-concept application, we demonstrate the continental-scale capabilities of the WTM by simulating the steady-state climate-driven water table for the present day and the Last Glacial Maximum (LGM; 21 000 calendar years before present) across the North American continent. During the LGM, North America stored an additional 14.98 cm of sea-level equivalent (SLE) in lakes and groundwater compared to the climate-driven present-day scenario. We compare the present-day result to other simulations and real-world data. Open-source code for the WTM is available on GitHub and Zenodo.

Callaghan, Kerry L. (ORCID:0000000226740838)↗