Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Disordered alloys”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Competing Interactions between Mesoscale Length-Scales, Order-Disorder, and Martensitic Transformation in Ferromagnetic Shape Memory Alloys

In the present study, the effects of composition and heat treatments and the resulting microstructural changes on the martensitic transformation and ferromagnetic transition have been investigated in NiCoMnIn metamagnetic shape memory alloys. In this shape memory alloy system, it is observed that upon heat treatments at a wide temperature range, the onset temperature of the martensitic transformation follows a non-monotonic behavior with respect to heat treatment time, and the nature of the non-monotonic behavior is also a function of composition. This behavior cannot be attributed to well-known factors such as precipitation, change in local composition due to the precipitation and/or global degree of order. In this work, a systematic investigation through synthesis, thermal processing and characterization via thermo-physical measurements, transmission electron microscopy and in-situ synchrotron x-ray diffraction experiments has been used to correlate the non-monotonic dependence of the martensitic transformation and ferromagnetic transition temperatures to the evolution of L2 1 domains arising from a order/disorder phase transition. A thermodynamic model for the magneto-structural transition is combined with classical nucleation theory to further ascertain the role of microstructural length-scales on the onset of the martensitic transformation. This work thus provides understanding of the thermodynamic and kinetic factors that can be controlled to tune the coupled magneto-structural transformations in NiCoMnIn metamagnetic shape memory alloys.

36 MATERIALS SCIENCE↗

Temperature and concentration dependences of the electrical resistivity for alloys of plutonium with americium under normal conditions

The temperature and concentration dependences of the electrical resistivity for alloys of americium with plutonium are analyzed in terms of the multiband conductivity model for binary disordered substitution-type alloys. For the case of high temperatures (T > {Theta}{sub D}, {Theta}{sub D} is the Debye temperature), a system of self-consistent equations of the coherent potential approximation has been derived for the scattering of conduction electrons by impurities and phonons without any constraints on the interaction intensity. The definitions of the shift and broadening operator for a single-electron level are used to show qualitatively and quantitatively that the pattern of the temperature dependence of the electrical resistivity for alloys is determined by the balance between the coherent and incoherent contributions to the electron-phonon scattering and that the interference conduction electron scattering mechanism can be the main cause of the negative temperature coefficient of resistivity observed in some alloys involving actinides. It is shown that the great values of the observed resistivity may be attributable to interband transitions of charge carriers and renormalization of their effective mass through strong s-d band hybridization. The concentration and temperature dependences of the resistivity for alloys of plutonium and americium calculated in terms of the derived conductivity model are compared with the available experimental data.

36 MATERIALS SCIENCE↗

Quaternary (FeIn{sub 2}S{sub 4}){sub x}(MnIn{sub 2}S{sub 4}){sub 1-x} alloys and photosensitive structures on their basis

Using directional crystallization of the melt of the (FeIn{sub 2}S{sub 4}){sub x}(MnIn{sub 2}S{sub 4}){sub 1-x} alloy, homogeneous crystals of a similar atomic composition are grown over the entire range of compositions 1 {>=} x {>=} 0. It is established that the crystals of the continuous series of quaternary alloys in the range x = 0-1 crystallize in the spinel structure and lattice parameter a linearly depends on x. It is established that it is possible to obtain In(Al)/(FeIn{sub 2}S{sub 4}){sub x}(MnIn{sub 2}S{sub 4}){sub 1-x} photosensitive structures. Room-temperature spectra of relative quantum efficiency of photoconversion of the In(Al)/(FeIn{sub 2}S{sub 4}){sub x}(MnIn{sub 2}S{sub 4}){sub 1-x} structures fabricated for the first time are obtained. From the analysis of these spectra, activation energies of direct and indirect band-to-band transitions for the crystals of the (FeIn{sub 2}S{sub 4}){sub x}(MnIn{sub 2}S{sub 4}){sub 1-x} alloys are determined and the dependence of these parameters on the composition of the position-disordered phases of mentioned alloys is discussed. It is concluded that the crystals of the (FeIn{sub 2}S{sub 4}){sub x}(MnIn{sub 2}S{sub 4}){sub 1-x} alloys can be used in broadband photoconverters of optical radiation.

36 MATERIALS SCIENCE↗

Interplay of Alloying and Ordering on the Electronic Structure of GaxIn1-xP Alloys

In this work, we extend the study of the electronic structure of disordered and ordered Ga{sub x}In{sub 1-x}P alloys from the focus of most previous effort, x {approx} 0.5, to the whole composition range, 0 < x < 1, using an improved empirical pseudopotential method with a supercell approach that employs a sufficiently large supercell size of {approx}28,000 atoms - a size needed to realistically model disordered and partially ordered alloys. This study provides insights into the underlying physics of the alloy system in two important phases - disordered and CuPt ordered - and the interplay of alloying and ordering effects. It also offers much-needed guidance for the optimal use of ordering phenomenon in a range of applications including telecommunications, photovoltaics, and solid-state lighting. Critical-point energies, interband transition matrix elements, and optical anisotropy are calculated for both the disordered and ordered phases. The deviation of the wave function of an alloy state from that of a virtual-crystal state is analyzed using a spectral function. The implications of such deviation are examined explicitly for the above-mentioned properties. Unusual ordering effects are revealed in the indirect-band-gap composition region of the alloy. The connection and distinction between the ordered and disordered structures are discussed. An often-used perturbation theory, known as 'a quasicubic model', is found to be reasonably accurate for predicting the anisotropy of the interband transition but inadequate for predicting the intensity variation with varying order parameter.

14 SOLAR ENERGY↗

Electronic, magnetic and structural properties of CoFeVAl and CoFeV 0.5 Mn 0.5 Al

Abstract In this study, we present results of a comprehensive computational and experimental study of CoFeVAl and CoFeV 0.5 Mn 0.5 Al Heusler alloys. It is shown that while CoFeVAl exhibits a fairly large degree of spin polarization, this material is not half-metallic due to the presence of the vanadium spin-down states at the Fermi level. However, replacing 50% of vanadium with manganese results in a nearly half-metallic transition, largely due to the shift of the Fermi level towards occupied states. Moreover, the half-metallicity of CoFeV 0.5 Mn 0.5 Al is rather robust in a wide range of considered mechanical strain and under experimentally observed B2-type atomic disorder, thus making this alloy potentially suitable for practical spintronic applications. Both considered alloys exhibit ferromagnetic alignment at larger lattice constants, aside from a relatively small magnetic moment of vanadium which is anti-aligned with the magnetic moments of Co, Fe and Mn. We have synthesized both CoFeVAl and CoFeV 0.5 Mn 0.5 Al alloys in cubic structure with some structural disorder using arc melting and annealing. The structural and magnetic properties of the synthesized CoFeV 0.5 Mn 0.5 Al alloy are in good agreement with the theoretical calculations but vary slightly from the parent compound.

Physics↗

Influence of local lattice distortions on electrical transport of refractory high entropy alloys

In this report we employ first-principles alloy theories to assess the influence of local lattice distortions on the electronic transport of six body-centered cubic high-entropy alloys. We find weak disorder smearing of bands in the ideal lattice due to the similar number of valence electrons among alloying elements. Allowing relaxation, we demonstrate that local distortions in NbMoTaW and VNbMoTaW are small while they are anomalously large in HfNbTiZr, HfNbTaTiZr, VCrZrNb and CrNbTiVZr. The Fermi surfaces of the latter are strongly smeared by local distortions, leading to nearly-saturated resistivities. These findings address the important local relaxation effect on the electronic structure of high-entropy alloys.

36 MATERIALS SCIENCE↗

Anisotropic, multiband, and strong-coupling superconductivity of the Pb 0.64 ⁢Bi 0.36 alloy

This paper presents theoretical and experimental studies on the superconductivity of Pb ⁢0.64 ⁢Bi 0.36 alloy, which is a prototype of strongly coupled superconductors and exhibits one of the strongest coupling under ambient pressure among the materials studied so far. The critical temperature, the specific heat in the superconducting state, and the magnetic critical fields are experimentally determined. Deviations from the single-gap s-wave BCS-like behavior are observed. The electronic structure, phonons, and electron-phonon interactions are analyzed in relation to the metallic Pb, explaining why the Pb-Bi alloy exhibits such a large value of the electron-phonon coupling parameter λ ≃ 2. Superconductivity is studied using the isotropic Eliashberg formalism as well as the anisotropic density functional theory for superconductors. Here, we find that while Pb is a two-gap superconductor with well-defined separate superconducting gaps, in the Pb-Bi alloy an overlapped three-gap-like structure is formed with a strong anisotropy. Furthermore, the chemical disorder, inherent to this alloy, leads to strong electron scattering, which is found to reduce the critical temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Role of Static Displacements in Stabilizing Body Centered Cubic High Entropy Alloys

The configurational entropy of high entropy alloys (HEAs) plays little role in the stabilization of one particular crystal structure over another. We show that disorder-induced atomic displacements help stabilize body centered cubic (bcc) structure HEAs with average valences <4.7. These disorder-induced atomic displacements mimic the temperature-induced vibrations that stabilize the bcc structure of group IV elemental metals at high temperatures. The static displacements are significantly larger than for face centered cubic HEAs, approaching values associated with the Lindemann criterion for melting. Chemical disorder in high entropy alloys have a previously unidentified, nonentropic energy contribution that stabilizes a particular crystalline ground state.

74 ATOMIC AND MOLECULAR PHYSICS↗

Disorder-induced reversal of spin polarization in the Heusler alloy Co{sub 2}FeSi

We study the spin polarization in the conduction band of Co{sub 2}FeSi layers with a different degree of structural order. The injected spin polarization in Co{sub 2}FeSi/(Al,Ga)As spin light-emitting diodes as well as the planar Hall effect measured for the Co{sub 2}FeSi injectors exhibit a sign reversal between injectors crystallized in the ordered L2{sub 1} phase and the Fe-Si disordered B2 phase. These results are explained by a disorder-induced change in the spin polarization at the Fermi energy of Co{sub 2}FeSi. Support for the occurrence of such a striking change in the electronic band structure is obtained by first principles calculations.

36 MATERIALS SCIENCE↗

Effect of metallurgical structure and properties on adhesion and friction behavior of cobalt alloys

The metallurgical structure and some of the mechanical properties of two cobalt alloys, cobalt-50% iron and cobalt-25% molybdenum-10% chromium, were determined under various heat treated conditions. The mechanical properties of the bcc disordered Co-50Fe alloy, which was found to be very brittle, indicated an exceedingly low fracture strength, low hardness, and very weak grain boundary strength. Ordering by suitable heat treatment only produced a more brittle material with a lower fracture strength and a slightly higher hardness value. Work hardening was found to produce a finer grain structure and a greater grain boundary strength. Tensile properties were examined. It was found that the Co-25Mo-10Cr alloy was difficult to place in the alpha Co solid solution condition, which limited the ability to use precipitation as a hardening reaction. Over two hundred adhesion cycles from zero contact load, to maximum load, to fracture were conducted between couples for each of the above alloys in an ultrahigh vacuum system which would permit the sample surfaces to be cleaned of all contaminant layers. In the Co-50Fe case, the calculated fracture stress from the adhesion tests showed values in the range of 80 to 150 k.s.i., which is about ten times greater than the values from tension tests.

Keller, D. V., Jr.↗

Effect of structural disorder on the magnetocaloric properties of Ni-Mn-Sn alloy

The magnetic and magnetocaloric properties of Ni{sub 50}Mn{sub 36.5}Sn{sub 13.5} Heusler alloy has been studied by varying the duration of annealing (0, 6, 12, 18, and 24 h) at 1173 K. The atomic ordering increases, martensitic transition (MT) becomes sharper and exchange bias field increases with increasing annealing time. The sample annealed for 24 h has shown a large magnetic entropy change (ΔS{sub M}) near its MT. But, the net refrigerant capacity at the MT of 12 h annealed sample is larger than the former one. We have discussed these results in the context of structural disorder and the ferro/antiferro correlations present in these alloy systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stabilization of Preternatural Barium Oxidation States as an Unexpected Byproduct of β-Decay: Discovery of a New Halide Semiconductor Alloy

137 Cs has a wide range of roles in the nuclear industry. The solid material, safely encapsulated in CsCl as 137 CsCl, is stored as fission product waste from nuclear power production and legacy waste from nuclear weapons production; it has also served as a radiation source in food and sewage irradiators as well as medical devices. However, because of the solubility of the chloride salt and the relatively high specific activity of 137 Cs, damaged or broken capsules can lead to severe radiological accidents. Safe capsule design and material recycling are complicated by the unclear structural evolution during β-decay, which remains ambiguous due to the differing oxidation states of Cs (1+) and Ba (2+). Here, in this study, we use first-principles calculations to investigate the evolving structure–property relationships of Cs 1–x Ba x Cl during β-decay. Despite the well-established 2+ formal oxidation state of alkali-earth metals, we find that Ba 1+ can be stabilized in the form of a mixed-valence alloy at low concentrations. Specifically, we identify three regimes for the β-decay of 137 Cs into CsCl: Ba-doped CsCl (Ba ≤ 14%), wherein Ba has the expected 2+ oxidation state; Cs–Ba–Cl alloys, where Ba has a mix of the usual Ba 2+ and highly unusual Ba 1+ oxidation state in the form of a quasi-disordered mixed-valence alloy (Ba = 25%); and phase separation into a CsCl + BaCl 2 + Ba (m) mechanical mixture, where Ba reverts to its expected 2+ oxidation state (Ba > 25%). Surprisingly, the Cs 0.75 Ba 0.25 Cl mixed-valence alloy is a narrow indirect band gap semiconductor (1.05 eV) despite the insulating nature of both CsCl and BaCl 2 . It also exhibits strongly excitonic polarized optical properties, has glass-like ultralow thermal conductivity (directional average of 0.21 W/mK at 300 K), and shows greater resistance to deformation under both tensile and volumetric strengths compared with the original CsCl structure (e.g., shear and Young’s modulus of 9.04 and 31.62 GPa, respectively). These findings imply that transmutation of 137 Cs leads to highly unusual chemical bonding that stabilizes Ba 1+ in local regions of the quasi-disordered Cs 0.25 Ba 0.75 Cl, resulting in anomalous physical properties. Moreover, this discovery provides valuable insight for safe nuclear waste capsule design, which can aid in preventing environmental or human exposure to radioactive materials.

Fuhr, Addis S. [Oak Ridge National Laboratory (ORN↗

First-Principles Study of Phase Stability of bcc XZn (X = Cu, Ag, and Au) Alloys

First-principles density-functional theory is used to study the phase stability/instability and anomalies in the formation of the high-temperature bcc phases of X Zn (X = Cu, Ag, and Au) alloys. Although from perhaps a naive point of view, their properties are expected to monotonically depend on the noble-metal (X) column position in the periodic table, this is not the case. For example, the middle-column AgZn alloy has a lower bcc order-disorder (critical) temperature than the CuZn and AuZn alloys above and below in the column. It is shown that this and other nonmonotonic behaviors can be explained in terms of a competition between atomic-size effects and X-atom d-orbital spatial extent. For example, charge-density studies and pair-potential modeling of X Zn alloys show that the effective Ag-Zn bond is significantly weaker than either the Cu-Zn or Au-Zn bond at their respective equilibrium lattice constants. Furthermore, we find that an increased atomic-core size effect initially weakens the X-Zn bonding as one goes from CuZn to AgZn, but then the larger d-orbital spatial extent for higher principal quantum numbers becomes a more dominant effect and increases the bonding from AgZn to AuZn. In conclusion, this study is focused on the highly symmetric cubic high-temperature phases, where relative bond-strength magnitudes should be far more important than any bond-directionality effects; the lattice parameters, bulk moduli, elastic constants, Debye temperatures, heats of formation, and order-disorder temperatures for the bcc phases of the three X Zn alloys are calculated and compared with experiment.

36 MATERIALS SCIENCE↗

On the theory of interactions and thermodynamic properties of carbon atoms in hcp and fcc iron

General expressions are derived for deformational interactions of interstitial atoms in an hcp interstitial alloy MeX{sub c} taking into account Me-X interactions of any range. These expressions are used for obtaining quantitative estimates of both deformational and chemical interactions of carbon atoms in hcp iron-carbon alloys. The results show that the interactions of interstitial atoms in hcp alloys noticeably differ from analogous interactions in cubic alloys, being more anisotropic, more extended, and more sharply oscillating with increasing distance. Analytical expressions are obtained for the thermodynamic contribution of interstitial atoms in disordered MeX{sub c} alloys using both the simple mean field approximation and more exact cluster methods. Comparison of the results of such calculations for austenite with the results of simulation based on the Monte Carlo technique and with experimental data shows that the accuracy of the mean field approximation for MeX{sub c} alloys is very low due to strong repulsion of neighboring interstitial atoms. On the other hand, the accuracy of cluster methods remains high for all temperatures and concentrations under consideration.

36 MATERIALS SCIENCE↗

On the theory of interactions and thermodynamic properties of carbon atoms in hcp and fcc iron

General expressions are derived for deformational interactions of interstitial atoms in an hcp interstitial alloy MeX{sub c} taking into account Me-X interactions of any range. These expressions are used for obtaining quantitative estimates of both deformational and chemical interactions of carbon atoms in hcp iron-carbon alloys. The results show that the interactions of interstitial atoms in hcp alloys noticeably differ from analogous interactions in cubic alloys, being more anisotropic, more extended, and more sharply oscillating with increasing distance. Analytical expressions are obtained for the thermodynamic contribution of interstitial atoms in disordered MeX{sub c} alloys using both the simple mean field approximation and more exact cluster methods. Comparison of the results of such calculations for austenite with the results of simulation based on the Monte Carlo technique and with experimental data shows that the accuracy of the mean field approximation for MeX{sub c} alloys is very low due to strong repulsion of neighboring interstitial atoms. On the other hand, the accuracy of cluster methods remains high for all temperatures and concentrations under consideration.

36 MATERIALS SCIENCE↗

Anti-site disorder and improved functionality of Mn₂NiX (X = Al, Ga, In, Sn) inverse Heusler alloys

Recent first-principles calculations have predicted Mn₂NiX (X = Al, Ga, In, Sn) alloys to be magnetic shape memory alloys. Moreover, experiments on Mn₂NiGa and Mn₂NiSn suggest that the alloys deviate from the perfect inverse Heusler arrangement and that there is chemical disorder at the sublattices with tetrahedral symmetry. In this work, we investigate the effects of such chemical disorder on phase stabilities and magnetic properties using first-principles electronic structure methods. We find that except Mn₂NiAl, all other alloys show signatures of martensitic transformations in presence of anti-site disorder at the sublattices with tetrahedral symmetry. This improves the possibilities of realizing martensitic transformations at relatively low fields and the possibilities of obtaining significantly large inverse magneto-caloric effects, in comparison to perfect inverse Heusler arrangement of atoms. We analyze the origin of such improvements in functional properties by investigating electronic structures and magnetic exchange interactions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of configurational disorder on the elastic properties of icosahedral boron-rich alloys based on B{sub 6}O, B{sub 13}C{sub 2}, and B{sub 4}C, and their mixing thermodynamics

The elastic properties of alloys between boron suboxide (B{sub 6}O) and boron carbide (B{sub 13}C{sub 2}), denoted by (B{sub 6}O){sub 1−x}(B{sub 13}C{sub 2}){sub x}, as well as boron carbide with variable carbon content, ranging from B{sub 13}C{sub 2} to B{sub 4}C are calculated from first-principles. Furthermore, the mixing thermodynamics of (B{sub 6}O){sub 1−x}(B{sub 13}C{sub 2}){sub x} is studied. A superatom-special quasirandom structure approach is used for modeling different atomic configurations, in which effects of configurational disorder between the carbide and suboxide structural units, as well as between boron and carbon atoms within the units, are taken into account. Elastic properties calculations demonstrate that configurational disorder in B{sub 13}C{sub 2}, where a part of the C atoms in the CBC chains substitute for B atoms in the B{sub 12} icosahedra, drastically increase the Young’s and shear modulus, as compared to an atomically ordered state, B{sub 12}(CBC). These calculated elastic moduli of the disordered state are in excellent agreement with experiments. Configurational disorder between boron and carbon can also explain the experimentally observed almost constant elastic moduli of boron carbide as the carbon content is changed from B{sub 4}C to B{sub 13}C{sub 2}. The elastic moduli of the (B{sub 6}O){sub 1−x}(B{sub 13}C{sub 2}){sub x} system are also practically unchanged with composition if boron-carbon disorder is taken into account. By investigating the mixing thermodynamics of the alloys, in which the Gibbs free energy is determined within the mean-field approximation for the configurational entropy, we outline the pseudo-binary phase diagram of (B{sub 6}O){sub 1−x}(B{sub 13}C{sub 2}){sub x}. The phase diagram reveals the existence of a miscibility gap at all temperatures up to the melting point. Also, the coexistence of B{sub 6}O-rich as well as ordered or disordered B{sub 13}C{sub 2}-rich domains in the material prepared through equilibrium routes is predicted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗