SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Silicon oxide films thicker than 1000 angstrom are produced in the dense plasma of a microwave discharge. The oxide growth is characterized by a rate limiting diffusion process modified by sputtering effects produced by the discharge. Silicon is rapidly oxidized at temperatures estimated to be 500 degrees C or lower.
Low energy neutral detection, bremsstrahlung spectra emitted from dense plasma focus mode of plasma accelerator, atomic processes and solid state physics
Measurements of the X-ray spectrum (1.85-7 keV) of A0620-00 obtained on 1975 October 17 and 1976 January 1-9 with the graphite crystal spectrometer on OSO-8 show a smooth continuum with an absence of emission lines. Upper limits are given for line emission from Si and S ions and are used to establish that the source is not optically thin. The results support a dense plasma model.
A charging model was developed for geosynchronous, three-axis stabilized spacecraft when under the influence of a geomagnetic substorm. The differential charging potentials between the thermally coated or blanketed outer surfaces and metallic structure of a spacecraft were determined when the spacecraft was immersed in a dense plasma cloud of energetic particles. The spacecraft-to-environment interaction was determined by representing the charged particle environment by equivalent current source forcing functions and by representing the spacecraft by its electrically equivalent circuit with respect to the plasma charging phenomenon. The charging model included a sun/earth/spacecraft orbit model that simulated the sum illumination conditions of the spacecraft outer surfaces throughout the orbital flight on a diurnal as well as a seasonal basis. Transient and steady-state numerical results for a three-axis stabilized spacecraft are presented.
A new intense ultraviolet light source has been developed from an array of hypocycloidal pinch (HCP) devices. The basic unit of the array is constructed with three disk electrodes and is capable of producing dense plasmas at temperatures up to 10,000,000 K. Very high input power levels to the array are possible without significantly shortening its useful life, in strong contrast with conventional xenon flashlamps. The new light source, when operated with Ar and Xe gas mixtures at high pressures (approximately 5 x 10 to the 4th Pa), produced a light output of over 100 MW in the near-UV spectral range and successfully pumped an iodine photodissociation laser at 1.315 microns. A xenon recombination laser at 2.027 microns was also pumped in the HCP array.
The heliocentrifugal motion of coronal loop transients is likely driven largely by the buoyant force exerted by the ambient medium. In the outer corona where the solar wind is well formed, the buoyant force results mainly from the rapid outward decrease in the ambient pressure of the solar wind. The contribution from magnetic buoyancy is not so significant as in the vicinity of the solar surface. Therefore, the pertinent features of the loop transients in the outer corona are basically gasdynamical. As a conspicuous part of coronal expansion, the motion of the compressible masses in the transient loops is largely controlled by thermal forces. The translational motion of heliocentrifugal expansion is driven by the hydrodynamic buoyant force, and the lateral motion of peripheral expansion is driven by the pressure difference between the dense plasma of the ejecta and the tenuous plasma of the ambient medium.
The Trigger experiment, designed to test the response of the auroral ionosphere to an impulsive release of a hot, dense plasma, and consisting of a sounding rocket payload (launched on February 11, 1977) divided into two parts, an instrumented diagnostic section and a cesium-doped high-explosive canister, is described. When the two sections were separated by about 1 km, the cesium high-explosive was ignited and the plasma around the payload was observed to increase briefly by a factor of 4 in density and a factor of 2 in temperature, upon which various particle and field phenomena occurred in rapid succession. A large increase in the field-aligned charged particle flux was observed over the approximate energy range of 10 eV to more than 300 keV, starting about 150 ms after the release and lasting about 1 second. A second particle burst started one second after the release and lasted for tens of seconds. A transient electric field pulse of 200 mV/m appeared just before the particle flux increase began.
The charging of a large sphere subject to the environment encountered by the shuttle orbiter as it passes through the auroral regions in its low polar Earth orbit was investigated. The environment consists of a low temperature dense plasma and a relatively intense (200 mu A/sq m) field aligned flux of energetic electrons (approximately 5 to 10 keV). The potential on a sphere in eclipse is presented as a function of the ratio kappa of the charging rate produced by precipitating electrons to the discharging rate produced by ram ions. It was found that a 5 meter conducting sphere charges to potentials of order 1 kilovolt for kappa approximately 2, even though a 0.5 meter sphere charges to less than 100 volts. It is concluded that the natural charging environment can induce large potentials (approximately 1 kilovolt) on the shuttle orbiter.
A system-oriented computer code is used to predict surface charging due to voltages generated within a satellite operating in the typical dense plasma environment of LEO. The use of this code is demonstrated by predicting the expansion of electric fields onto a kapton surface from a pinhole over a biased conductor in a LEO environment. The results are compared to a more-exact solution and experimental data.
Characterizations of the Saturn magnetospheric activities that have been made possible through data gathered by means of the Pioneer 11 and Voyagers 1 and 2 flybys are reviewed. The spacecraft data confirmed the presence of a Saturn magnetosphere, which features inward diffusion and energization of trapped energetic particles as well as cosmic ray albedo neutron decay as a source of inner belt protons. A dense plasma was identified in the region covering the outer magnetosphere to the magnetopause, which extends outward 17.3-23.6 Saturn radii on the sunward side and from 30.3-70 radii on the far side, according to the satellite measurements. Characteristics of the particle populations and behaviors of the outer magnetosphere, the slot region, the inner magnetosphere, and the ring region are reviewed, as are those of the magnetic field, the solar wind-magnetospheric interaction, and the Titan-magnetospheric interaction are described. Further investigation of the longitudinal asymmetry of decimetric radio emissions from Saturn is recommended.
Coronal bullets are small ejecta of cool, dense plasma observed to accelerate through the solar atmosphere from 20 to 450 km/s. The NRL Dynamic Flux Tube Model has been used to simulate the evolving physical properties of these dynamic events. The present calculations utilize an adaptive-gridding technique to resolve the fine structure within and around the bullets. In this work, an identification was made of a component of shocked plasma which piles up ahead of the bullet and eventually dominates both the dynamics and heating of the original bullet mass. The observational consequences of this shocked component are discussed in terms of the available HRTS EUV data, and suggestions are made for optimizing future observations of this phenomenon. An investigation has also been conducted of the structure of the bullet material visible in EUV spectral lines and the observable characteristics of the EUV-emitting plasma. Finally, the most likely mechanisms for accelerating the bullets, as well as favorable sites of origin are evaluated.
Three flares observed by the Soft X-Ray Polychromator on the Solar Maximum Mission were studied. Flare light curves from the Flat Crystal Spectrometer and Bent Crystal Spectrometer were examined for rapid signal variations. Each flare was characterized by an initial fast (less than 1 min) burst, observed by the Hard X-Ray Burst Spectrometer (HXRBS), followed by softer gradual X-ray emission lasting several minutes. From an autocorrelation function analysis, evidence was found for quasi-periodic fluctuations with rise and decay times of 10 s in the Ca XIX and Fe XXV light curves. These variations were of small amplitude (less than 20%), often coincided with hard X-ray emissions, and were prominent during the onset of the gradual phase after the initial hard X-ray burst. It is speculated that these fluctuations were caused by repeated energy injections in a coronal loop that had already been heated and filled with dense plasma associated with the initial hard X-ray burst.
An analysis of periodic variations in the amplitude of continuum radiation near 3 kHz trapped in the Jovian magnetosphere shows structure with periods near both five and ten hours. Contrary to a plausible initial idea, the continuum amplitudes are not organized by position of the observer relative to the dense plasma sheet. Instead, there seem to be preferred orientations of system III longitude with respect to the direction to the sun which account for the peaks. This implies a clock-like modulation of the continuum radiation intensity as opposed to a searchlight effect. The importance of the dipole longitude-solar wind alignment to the amplitude of the continuum radiation implies the source region of the radiation is near the magnetopause and may indirectly tie the generation of the radio waves to the clocklike modulation of energetic electron fluxes from Jupiter.
VLA observations of compact transient sources on the sun at 2 cm wavelength are presented. These sources have angular sizes of theta of about 5-25 arcsec, brightness temperatures of about 1-3 x 10 to the 5th K, and lifetimes ranging between a few minutes to several hours. The emission originates in regions of diffuse plage and quiet sun, where the photospheric magnetic fields are relatively weak (H of not greater than 100 G). In some cases the 2 cm radiation may be explained as the thermal bremsstrahlung of a dense plasma in the transition region. For other sources, the relatively high circular polarization suggests a nonthermal emission mechanism, such as the gyrosynchrotron radiation of mildly relativistic electron with a power-law spectrum.
The importance of the form of the driving mechanism in MHD simulations of coronal mass ejections is investigated. A model simulation problem is devised, and it is found that the use of a simple form for the initial corona, with an upward moving parcel of cold, dense plasma as the driving mechanism, can produce results that are consistent with many of the features observed by coronagraphs. The results imply that the nature of the driving mechanism may play an important role in determining the dynamical evolution of mass ejections.
The energy and wave functions of two-particle states in a dense plasma are essentially influenced by the surrounding medium. However, the two-particle bound-state energies may remain unshifted over a large density interval. Two simple examples are given to demonstrate the compensation of many-particle effects such as the self-energy and effective two-particle potentials in hydrogen plasmas. Neglecting self-energy and Pauli blocking, energy values that follow from numerical solutions of the Schroedinger equation with a Debye potential are obtained.
The electric and thermal conductivities in the outer crustal matter of a neutron star quenched into a solid state by cooling are estimated using a Monte Carlo simulation of freezing transition for dense plasmas. The conductivities are calculated by the precise evaluation of the scattering integrals, using the procedure of Ichimaru et al. (1983) and Iyetomi and Ichimaru (1983). The results predict the conductivities lower, by a factor of about 3, than those with the single-phonon approximation.
The problem of electromagnetic coupling between two horns is of interest for the Microwave Reflectometer Ionization Sensor (MRIS) that will be used in the Aeroassist Flight Experiment (AFE). Laboratory measurements of mutual coupling between conical horns (using a flat metallic reflector to simulate a critically dense plasma outside) have shown a strong dependence on the finite dimensions of the shuttle tile over the apertures. Since both, the dielectric tile and the plasma outside the tile reflect microwaves, a study should be done to isolate the two mechanisms so that the MRIS reentry flight data can be interpreted correctly. Once the coupling due to the tile itself is determined then the location of the critial electron number density layers can be determined. As a first attempt to tackle this problem the Geometrical Theory of Diffraction was used to modify the existing solution to mutual coupling between apertures with infinite dielectric sheets. By using the equivalent current method, aperture theory to determine the radiated fields inside the dielectric tiles, and ray tracing the contributions to mutual coupling were determined. Results from two cases with different tile thicknesses have indicated that the main contribution to mutual coupling is due to diffraction from the bottom and top (back and front) wedges.