Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Decay Curve”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

On the Goertler vortex instability mechanism at hypersonic speeds

The linear instability of the hypersonic boundary layer on a curved wall is considered. As a starting point, the viscosity of the fluid is taken to be a linear function of temperature and real-gas effects are ignored. It is shown that the flow is susceptible to Goertler vortices and that they are trapped in the logarithmically thin adjustment layer in which the temperature of the basic flow changes rapidly to its free stream value. The vortices decay exponentially in both directions away from this layer and are most unstable when their wavelength is comparable with the depth of the adjustment layer. The nonuniqueness of the neutral stability curve associated with incompressible Goertler vortices is shown to disappear at high Mach numbers if the appropriate 'fast' streamwise dependence of the instability is built into the disturbance flow structure. It is shown that in the hypersonic limit, wall-cooling affects the leading-order term in the expansion of the Goertler number which is independent of the wavenumber, and which is due to the curvature of the basic state but it has a negligible effect on the other terms which are dependent on the wavenumber.

Hall, Philip↗
NASA NTRS1993

Discovery of Orbital Decay in SMC X-1

We report on the results of three observations of the binary X-ray pulsar SMC X-1 with the Ginga satellite. Timing analyses of the 0.71 s X-ray pulsations yield Doppler delay curves which, in turn, enable the most accurate determination of the SMC X-1 orbital parameters available to date. Epochs of phase zero for the 3.9 day orbit were determined for 1987 May, 1988 August, and 1989 August with accuracies of 13, 0.6, and 3 s, respectively. These epochs are combined with two previous determinations of the orbital epoch to yield the rate of change in the orbital period dot-P(orb)/P(orb) = ( 3.36 +/- 0.02) x 10(exp -6) yr(exp -1). An interpretation of the orbital decay is made in the context of tidal evolution, with consideration of the influence of the increasing moment of inertia of the companion star due to its nuclear evolution. We find that, while the orbital decay is probably driven by tidal interactions, the asynchronism between the orbit and the rotation of the companion star is most likely maintained by the evolutionary expansion of the companion star (Sk 160) rather than via the Darwin instability. In this case Sk 160 is likely to be in the hydrogen shell burning phase of its evolution. Finally, a discussion is presented of the relation among the time scales for stellar evolution (less than 10(exp 7) yr), orbital decay (3 x 10(exp 5) yr), and neutron-star spin-up in the SMC X-1 system (2000 yr). In particular, we present the result of a self-consistent calculation for the histories of the spin of the neutron star and the mass transfer in this system. A plausible case can be made for the spin-up time scale being directly related to the lifetime of the luminous X-ray phase which will end in a common-envelope phase within a time of less than approx. 10(exp 4) yr.

Levine, A.↗
NASA NTRS1992

Three-dimensional structure of a curved wake

The effects of streamwise curvature on the 3D structure of a plane wake are studied. Preliminary results indicate that the wake is initially grossly 3D with large spanwise distortions in the mean velocity and Reynolds stress contours. Local extrema distributed in a quasi-periodic manner are seen. The spanwise variations are caused by the presence of relatively strong quadrupoles of mean streamwise vorticity. Further downstream the mean vorticity decays at a rate lower on the unstable side of the wake so that only the unstable side row of vortices persist to the far-field region. As a result, the spanwise distortions and local extrema seem to persist with a relatively slow decay. The effects of curvature are also apparent in the Reynolds stress results. In particular, the shear stress is significantly affected by curvature right from the start such that significantly higher magnitudes are observed on the unstable side. The curved wake clearly develops a very 3D asymmetric structure which shows no signs of reaching an equilibrium state.

Weygandt, J. H.↗
DOE OSTI2023

Impact of artificial topological changes on flow and transport through fractured media due to mesh resolution

Abstract We performed a set of numerical simulations to characterize the interplay of fracture network topology, upscaling, and mesh refinement on flow and transport properties in fractured porous media. We generated a set of generic three-dimensional discrete fracture networks at various densities, where the radii of the fractures were sampled from a truncated power-law distribution, and whose parameters were loosely based on field site characterizations. We also considered five network densities, which were defined using a dimensionless version of density based on percolation theory. Once the networks were generated, we upscaled them into a single continuum model using the upscaled discrete fracture matrix model presented by Sweeney et al. (2019). We considered steady, isothermal pressure-driven flow through each domain and then simulated conservative, decaying, and adsorbing tracers using a pulse injection into the domain. For each simulation, we calculated the effective permeability and solute breakthrough curves as quantities of interest to compare between network realizations. We found that selecting a mesh resolution such that the global topology of the upscaled mesh matches the fracture network is essential. If the upscaled mesh has a connected pathway of fracture (higher permeability) cells but the fracture network does not, then the estimates for effective permeability and solute breakthrough will be incorrect. False connections cannot be eliminated entirely, but they can be managed by choosing appropriate mesh resolution and refinement for a given network. Adopting octree meshing to obtain sufficient levels of refinement leads to fewer computational cells (up to a 90% reduction in overall cell count) when compared to using a uniform resolution grid and can result in a more accurate continuum representation of the true fracture network.

58 GEOSCIENCES↗
NASA NTRS1980

The 1979 X-ray outburst of Cen X-4

X-ray observations of the first major outburst (since its initial discovery in 1969) of the "classical" transient X-ray source Cen X-4 were obtained with the Ariel 5 All-Sky Monitor. The flare light curve exhibits a double-peaked maximum at a level of approximately 4 times the Crab nebula, and its duration and characteristic decay time scale are the shortest yet observed from the class of "soft" X-ray transients. A total X-ray output of approximately 3 x 10 to the 43rd power ergs, a factor of approximately 20 less than that of the 1969 outburst is estimated. In addition, evidence is found for a regular modulation of the flux during the decline phase at a period of 8.2 plus or minus 0.2 hours. The existing data are consistent with a source model involving episodic mass exchange from a late-type dwarf onto a neutron star comparison in a relatively close binary system.

Kaluzienski, L. J.↗
NASA NTRS1987

Prospects for observations of nucleosynthetic gamma-ray lines and continuum from SN 1987A

Expected flux levels for nucleosynthetic gamma-ray line and continuum emissions from SN 1987A are calculated for several models. The dominant line emission is from freshly synthesized Ni-56 and its decay daughters, and the continuum is from Compton scattering of line photons. For a 15 solar mass Type II model, the light curve for the 0.847 MeV gamma-ray line peaks in September 1988 at 3 x 10 to the -4th photons/sq cm/s. This is detectable only by new, ultrasensitive balloon-borne spectrometers. For models with substantial mass loss from their envelopes, the peak is in early 1988 at about 0.01 photons/sq cm/s, which is detectable at high significance levels by all current instruments. The continuum emission in the 0.05-0.5 MeV band peaks about 100 days before the 0.847 MeV line peak. This Compton precursor is observable at about the same significance level as the lines.

Gehrels, Neil↗
NASA NTRS1989

Atmospheric occultation of a solar flare in hard x rays

The objective of this study is two-fold: to investigate the absorption of hard x rays along a tangential path through the terrestrial atmosphere, and to locate, other than the use of imaging devices, the flare source of x ray emission in the sun. Observational data were taken with the Hard X Ray Burst Spectrometer (HXRBS) on board the Solar Maximum Mission satellite (SMM). The occultation event chosen for investigation is the flare on 14 October 1981. Night fell on SMM during the decaying phase of the flare. In about fifteen seconds, the x ray flux decreased to zero. The model for computing synthetic light curve, which is directly comparable to the observed curve, consists of two computing programs. One is a modified version of an existing code, which compute the coordinates of the tangent points of the SMM-sun lines. The other program computed the atmospheric densities along the angles (N to S and E to W) measured from the center of the sun. The various model also depends on the destination of the terrestrial atmosphere at geocentric positions of SMM and the sun, the mean atmospheric densities at different heights and latitudes, and the x ray absorption cross of nitrogen, oxygen, and argon. The optical length, at a given time and for a x ray energy, is computed with the two angular parameters. The fit of a particular synthetic light, curve, i.e., the exponentials of the optical lengths, to the observed eclipse curve, yields the desired angular parameters.

Chen, Kwan-Yu↗
NASA NTRS2004

Peculiar Behaviors of Faint Galactic Bulge Transients

The Rossi X-ray Timing Explorer PCA scans of the Galactic bulge (galactic longitude plus or minus 11 degrees) have detected 8 recent transients which have peak intensities of 10 to 400 mCrab. Some of the transient events have a fast rise and slow decay typical of accretion disk instabilities. It is common for these decays to be oscillatory, rather than steady, as if there are waves within the disk. There are also outbursts with symmetric light curves. In particular, the source in Terzan 2 which had a very long (decade) doubling of intensity peaking near the beginning of 1997, in 2004 has had two 30 day brightenings by a factor of 5 only 100 days apart. During each of these a burst was observed in snapshot observations near the peak. The source SLX 1735-269, also a burster, though not in our observations, has had irregularly repeated occurrences of fast swings between close to zero and 2-4 times normal. Some examples, such as the increase, drop, and slow recovery of GS 1826-238 suggest a change in the accretion disk such as emptying and refilling or a peculiar alignment. Follow up observations have provided deeper information about these transient sources and possible explanations for their behavior will be addressed.

Swank, J. H.↗
NASA NTRS1989

On the Gortler vortex instability mechanism at hypersonic speeds

The linear instability of the hypersonic boundary layer on a curved wall is considered. As a starting point the viscosity of the fluid is taken to be a linear function of temperature and real-gas effects are ignored. It is shown that the flow is susceptible to Gortler vortices and that they are trapped in the logarithmically thin adjustment layer in which the temperature of the basic flow changes rapidly to its free stream value. The vortices decay exponentially in both directions away from this layer and are most unstable when their wavelength is comparable with the depth of the adjustment layer. The non-uniqueness of the neutral stability curve associated with incompressible Gortler vortices is shown to disappear at high Mach numbers if the appropriate fast streamwise dependence of the instability is built into the disturbance flow structure. It is shown that in the hypersonic limit wall-cooling has a negligible effect on the stability of a fluid with a given value of the Chapman constant.

Hall, Philip↗
NASA NTRS2012

GRB 120422A: a Low-Luminosity Gamma-Ray Burst Driven by a Central Engine

GRB 120422A is a low-luminosity gamma-ray burst (GRB) associated with a bright supernova, which distinguishesitself by its relatively short T(sub 90) (approximately 5 s) and an energetic and steep-decaying X-ray tail. We analyze the Swift BurstAlert Telescope and X-ray Telescope data and discuss the physical implications. We show that the steep declineearly in the X-ray light curve can be interpreted as the curvature tail of a late emission episode around 58-86 s,with a curved instantaneous spectrum at the end of the emission episode. Together with the main activity in thefirst 20 s and the weak emission from 40 s to 60 s, the prompt emission is variable, which points to a centralengine origin in contrast to a shock-breakout origin, which is used to interpret some other nearby low-luminosity supernova GRBs. Both the curvature effect model and interpreting the early shallow decay as the coasting externalforward shock emission in a wind medium provide a constraint on the bulk Lorentz factor to be around several.Comparing the properties ofGRB 120422A and other supernova GRBs,we find that themain criterion to distinguish engine-driven GRBs from shock-breakout GRBs is the time-averaged -ray luminosity. Engine-driven GRBs likelyhave a luminosity above approximately 10(sup 48) erg s(sup -1).

engine↗
NASA NTRS1993

Determination of plate wave velocities and diffuse field decay rates with braod-band acousto-ultrasonic signals

Lowest symmetric and lowest antisymmetric plate wave modes were excited and identified in broad-band acousto-ultrasonic (AU) signals collected from various high temperature composite materials. Group velocities have been determined for these nearly nondispersive modes. An algorithm has been developed and applied to determine phase velocities and hence dispersion curves for the frequency ranges of the broad-band pulses. It is demonstrated that these data are sensitive to changes in the various stiffness moduli of the materials, in agreement by analogy, with the theoretical and experimental results of Tang and Henneke on fiber reinforced polymers. Diffuse field decay rates have been determined in the same specimen geometries and AU configuration as for the plate wave measurements. These decay rates are of value in assessing degradation such as matrix cracking in ceramic matrix composites. In addition, we verify that diffuse field decay rates respond to fiber/matrix interfacial shear strength and density in ceramic matrix composites. This work shows that velocity/stiffness and decay rate measurements can be obtained in the same set of AU experiments for characterizing materials and in specimens with geometries useful for mechanical measurements.

Kautz, Harold E.↗
NASA NTRS2020

SN2020bvc: A Broad-line Type Ic Supernova with a Double-peaked Optical Light Curve and a Luminous X-Ray and Radio Counterpart

We present optical, radio, and X-ray observations of SN 2020bvc (=ASASSN-20bs, ZTF 20aalxlis), a nearby (z = 0.0252; d = 114Mpc) broad-line (BL) Type Ic supernova (SN) and the first double-peaked Ic-BL discovered without a gamma-ray burst (GRB) trigger. Our observations show that SN 2020bvc shares several properties in common with the Ic-BL SN 2006aj, which was associated with the low-luminosity gamma-ray burst (LLGRB) 060218. First, the 10 GHz radio luminosity (L(radio) ≈ 10^(37) erg/s) is brighter than ordinary core-collapse SNe but fainter than LLGRB SNe such as SN 1998bw (associated with LLGRB 980425). We model our VLA observations (spanning 13–43 days) as synchrotron emission from a mildly relativistic (v ≳ 0.3c) forward shock. Second, with Swift and Chandra, we detect X-ray emission (L(X) ≈ 10^(41) erg/s) that is not naturally explained as inverse Compton emission or part of the same synchrotron spectrum as the radio emission. Third, high-cadence (6 × per night) data from the Zwicky Transient Facility (ZTF) show a double-peaked optical light curve, the first peak from shock cooling of extended low-mass material (mass Me < 10^(-2) Mꙩ at radius Re > 10^(12) cm) and the second peak from the radioactive decay of 56Ni. SN 2020bvc is the first double-peaked Ic-BL SN discovered without a GRB trigger, so it is noteworthy that it shows X-ray and radio emission similar to LLGRB SNe. For four of the five other nearby (z ≲ 0.05) Ic-BL SNe with ZTF high-cadence data, we rule out a first peak like that seen in SN 2006aj and SN 2020bvc, i.e., that lasts ≈1 day and reaches a peak luminosity M ≈ −18. Follow-up X-ray and radio observations of Ic-BL SNe with well-sampled early optical light curves will establish whether double-peaked optical light curves are indeed predictive of LLGRB-like X-ray and radio emission.

Anna Y. Q. Ho↗
NASA NTRS1981

Thermodynamics and kinetics of the sulfation of porous calcium silicate

The sulfation of plasma sprayed calcium silicate in flowing SO2/air mixtures at 900 and 1000 C was investigated thermogravimetrically. Reaction products were analyzed using electron microprobe and X-ray diffraction analysis techniques, and results were compared with thermodynamic predictions. The percentage, by volume, of SO2 in air was varied between 0.036 and 10 percent. At 10 percent SO2 the weight gain curve displays a concave downward shoulder early in the sulfation process. An analytical model was developed which treats the initial process as one which decays exponentially with increasing time and the subsequent process as one which decays exponentially with increasing weight gain. At lower SO2 levels the initial rate is controlled by the reactant flow rate. At 1100 C and 0.036 percent SO2 there is no reaction, in agreement with thermodynamic predictions.

Miller, R. A.↗
NASA NTRS1992

Description of a subset of single events from the BATSE gamma ray burst data

About 15 percent of the gamma ray bursts in the Burst and Transient Source Experiment (BATSE) data exhibit a simple light curve consisting mainly of a single pulse without fine substructures. In 12 of the burst profiles, the pulse shapes show a linear rise and decay. Three events have a distinct sharp rise followed by a long, almost exponential decay. Searches based on only a sharp rise selection criterion resulted in five more grbs with different profile complexities. In one case, we identify an envelope of fast oscillations with a long, softer tail lasting about 100 seconds. The majority of events were detectable at energies above 300 keV, with tentative estimates for fluences that vary between 4.0 x 10(exp -8) and 5.4 x 10(exp -6) ergs/sq cm. We describe here their general characteristics (durations, rise-decay times) and their hardness ratios.

Kouveliotou, Chryssa↗
NASA NTRS2012

SN 2010ay Is a Luminous and Broad-Lined Type Ic Supernova Within a Low-Metallicity Host Galaxy

We report on our serendipitous pre-discovery detection and follow-up observations of the broad-lined Type Ic supernova (SN Ic) 2010ay at z = 0.067 imaged by the Pan-STARRS1 3pi survey just approximately 4 days after explosion. The supernova (SN) had a peak luminosity, MR approx. -20.2 mag, significantly more luminous than known GRB-SNe and one of the most luminous SNe Ib/c ever discovered. The absorption velocity of SN 2010ay is v Si (is) approx. 19×10(exp 3) km s−1 at approximately 40 days after explosion, 2-5 times higher than other broad-lined SNe and similar to the GRB-SN 2010bh at comparable epochs. Moreover, the velocity declines approximately 2 times slower than other SNe Ic-BL and GRB-SNe. Assuming that the optical emission is powered by radioactive decay, the peak magnitude implies the synthesis of an unusually large mass of 56Ni, MNi = 0.9 solar mass. Applying scaling relations to the light curve, we estimate a total ejecta mass, Mej (is) approx. 4.7 solar mass, and total kinetic energy, EK (is) approx. 11 × 10(exp 51) erg. The ratio of MNi to Mej is approximately 2 times as large for SN 2010ay as typical GRB-SNe and may suggest an additional energy reservoir. The metallicity (log(O/H)PP04 + 12 = 8.19) of the explosion site within the host galaxy places SN 2010ay in the low-metallicity regime populated by GRB-SNe, and (is) approximately 0.5(0.2) dex lower than that typically measured for the host environments of normal (broad-lined) SNe Ic. We constrain any gamma-ray emission with E(gamma) (is) approximately less than 6 × 10(exp 48) erg (25-150 keV), and our deep radio follow-up observations with the Expanded Very Large Array rule out relativistic ejecta with energy E (is) approximately greater than 10(exp 48) erg. We therefore rule out the association of a relativistic outflow like those that accompanied SN 1998bw and traditional long-duration gamma-ray bursts (GRBs), but we place less-stringent constraints on a weak afterglow like that seen from XRF 060218. If this SN did not harbor a GRB, these observations challenge the importance of progenitor metallicity for the production of relativistic ejecta and suggest that other parameters also play a key role.

supernovae: individual (2010ay)↗
DOE OSTI2025

Investigating rapid alpha-decay induced aging of 238 PuO 2 by Raman Spectroscopy

Investigating alpha-decay induced aging in PuO 2 is useful in nuclear forensics; helping to determine the time since last calcination. This was previously investigate by monitoring the damage to 240 PuO 2 over the course of a few years. The rate of alpha-decay induced aging has long been assumed to scale only with the decay rate of other isotopes without direct verification. This article reports the first alpha-decay aging study of 238 PuO 2 by Raman spectroscopy. Contrary to the expected 10 days for 238 PuO 2 to reach steady state based on 240 PuO 2 studies, the alpha aging curve reached an approximate steady state ∼24–30 h after laser annealing. While the cause of the order of magnitude decrease is unknown, it is speculated that dynamic annealing could contribute to the differences in rate of induced aging. The Raman spectra of annealed and aged 238 PuO 2 matched the expected features in 239 PuO 2 and 240 PuO 2 spectra; showing no formation of new stable chemical species in the material such as secondary Pu oxide phases (e.g., Pu 4 O 9 ). In conclusion, results indicate that 238 Pu could be leveraged for rapid alpha-decay aging studies to characterize alpha-decay induced features and better understand matrix temperatures and the annealing of Frankel pair defects.

Actinide↗
NASA NTRS2011

GRB 081029: A Gamma-Ray Burst with a Multi-Component Afterglow

We present an analysis of the unusual optical light curve of the gamma-ray burst GRB 081029, a long-soft burst with a redshift of z = 3.8479. We combine X-ray and optical observations from the Swift X-Ray Telescope and the Swift UltraViolet Optical Telescope with ground-based optical and infrared data obtained using the REM and ROTSE telescopes to construct a detailed data set extending from 86 s to approx. 100000 s after the BAT trigger. Our data cover a wide energy range, from 10 keV to 0.77 eV (1.24 A to 16000 A). The X-ray afterglow shows a shallow initial decay followed by a rapid decay starting at about 18000 s. The optical and infrared afterglow, however, shows an uncharacteristic rise at about 5000 s that does not correspond to any feature in the X-ray light curve. Our data are not consistent with synchrotron radiation from a jet interacting with an external medium, a two-component jet, or continuous energy injection from the central engine. We find that the the optical light curves can be broadly explained by a collision between two ejecta shells within a two-component jet. A growing number of gamma-ray burst afterglows are consistent with complex jets, which suggests that some (or all) gamma-ray burst jets are complex and will require detailed modelling to fully understand them.

Holland, Stephen T.↗
NASA NTRS1971

A method for nonlinear exponential regression analysis

A computer-oriented technique is presented for performing a nonlinear exponential regression analysis on decay-type experimental data. The technique involves the least squares procedure wherein the nonlinear problem is linearized by expansion in a Taylor series. A linear curve fitting procedure for determining the initial nominal estimates for the unknown exponential model parameters is included as an integral part of the technique. A correction matrix was derived and then applied to the nominal estimate to produce an improved set of model parameters. The solution cycle is repeated until some predetermined criterion is satisfied.

Junkin, B. G.↗