Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Availability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Model Choice Metrics to Optimize Profile-QSAR Performance

Predicting molecular activity against protein targets is difficult because of the paucity of experimental data. Approaches like multitask modeling and collaborative filtering seek to improve model accuracy by leveraging results from multiple targets, but are limited because different compounds are measured with different assays, leading to sparse data matrices. Profile-QSAR (pQSAR) 2.0 addresses this problem by fitting a series of partial least squares models for each target, using as features the predictions from single-task models on the remaining targets. Here, this method has been shown to produce better results than single task and multitask models. However, the factors determining the success of pQSAR 2.0 have as yet not been characterized. In this paper we examine the experimental conditions that lead to better pQSAR models. We limit the amount of data available to the method by retraining with decreasing amounts of data and explore the model’s ability to generalize to compounds that have never been assayed. Finally, we look at the properties of training data needed to demonstrate pQSAR improvement.

Biological and medical sciences, Computer science↗
DOE OSTI2026

Conus-Wide Mapping of Water Availability and Cost

Background: New demands for water can be satisfied through a variety of source options. In some basins surface and/or groundwater may be available through permitting with the state water management agency (termed unappropriated water), alternatively water might be purchased and transferred out of its current use to another (termed appropriated water), or non-traditional water sources can be captured and treated (e.g., wastewater). The relative availability and cost of each source are key factors in the development decision. Unfortunately, these measures are location dependent with no consistent or comparable set of data available for evaluating competing water sources. With the help of water managers, water availability was mapped for over 2500 watersheds throughout CONUS. These values are unique in that they account for institutional factors (i.e., water rights, compacts, treaties, instream flows) that locally limit water use. Five water sources were individually examined, including unappropriated surface water, unappropriated groundwater, appropriated water, municipal wastewater and brackish groundwater. Associated costs to acquire, convey and treat the water, as necessary, for each of the five sources were estimated. These metrics were developed to support regional water planning and policy analysis with initial application to electric transmission planning in the western US. Problem: These data were originally developed in 20141 and updated in 20182. New datasets on which these data depend have been published. As such, there is need to update the water availability and cost data. There is also need to map this same data to a county resolution and to publish the data in a more accessible place. Organization of the dataset: Data are organized according to five primary water sources: • Unappropriated fresh surface water • Unappropriated fresh groundwater • Appropriated water • Recycled wastewater, and • Brackish water

Tidwell, Vincent [Pacific Northwest National Labor↗
DOE OSTI2023

Outbreak analysis from case count and survey data

This code enables fitting a model of an infectious disease outbreak, customized for when available data is a combination of case counts and symptom survey responses. This is just a small bit of code being used only for a publication; we need to release it to fulfill a journal's requirement that our work be reproducible.

Goldberg, Emma↗
DOE OSTI2022

Volcano infrasound: progress and future directions

Over the past two decades (2000–2020), volcano infrasound (acoustic waves with frequencies less than 20 Hz propagating in the atmosphere) has evolved from an area of academic research to a useful monitoring tool. As a result, infrasound is routinely used by volcano observatories around the world to detect, locate, and characterize volcanic activity. It is particularly useful in confirming subaerial activity and monitoring remote eruptions, and it has shown promise in forecasting paroxysmal activity at open-vent systems. Fundamental research on volcano infrasound is providing substantial new insights on eruption dynamics and volcanic processes and will continue to do so over the next decade. The increased availability of infrasound sensors will expand observations of varied eruption styles, and the associated increase in data volume will make machine learning workflows more feasible. More sophisticated modeling will be applied to examine infrasound source and propagation effects from local to global distances, leading to improved infrasound-derived estimates of eruption properties. Future work will use infrasound to detect, locate, and characterize moving flows, such as pyroclastic density currents, lahars, rockfalls, lava flows, and avalanches. Infrasound observations will be further integrated with other data streams, such as seismic, ground- and satellite-based thermal and visual imagery, geodetic, lightning, and gas data. The volcano infrasound community should continue efforts to make data and codes accessible and to improve diversity, equity, and inclusion in the field. In summary, the next decade of volcano infrasound research will continue to advance our understanding of complex volcano processes through increased data availability, sensor technologies, enhanced modeling capabilities, and novel data analysis methods that will improve hazard detection and mitigation.

58 GEOSCIENCES↗
DOE OSTI2019

Validation of RELAP-7 for Forced Convective and Natural Circulation Reactor Flows

New reactor designs such as small modular reactors and newly proposed passive safety systems rely on natural circulation two-phase flow cooling of the reactor core under accident conditions. Without a pump to drive the flow, the circulation rate is a strong function of void fraction. Under these conditions where the flow rate, pressure drop, and heat transfer are all closely coupled through the mixture density, the accurate prediction of void fraction is pivotal. Furthermore, while these passive systems boast a more reliable cooling option, the sensitivity of the system to two-phase flow instabilities is more likely than in forced convective cooling and can result in dangerous density wave or flow excursion conditions. Improvement of one-dimensional system codes and further development of three-dimensional code capability are all important efforts in addressing these issues. The proposed work is a critical step towards providing confidence through validation of the capability of thermal-hydraulic tools to meet the emerging challenges in reactor simulation. Historically, system analysis codes develop a stiffness over time due to fine-tuning of adjustable code parameters that result in a reluctance or inability to adopt improved models. Therefore, a rigorous effort should be invested in preparation for RELAP-7 to identify required modeling improvements of constitutive relations and validation of the code applicability to the wide range of possible reactor flow conditions. Part of this validation involves the uncertainty quantification which is a critical step in the Code Scaling, Applicability, and Uncertainty (CSAU) methodology and Best-Estimate Plus Uncertainty (BEPU) licensing method. BEPU allows recovery of safety margins and potentially optimizing plant performance, resulting in economic benefit for the reactor operators. Beginning with the collection of past experimental data covering prototypic LWR conditions, this document reviews three critical datasets available for the validation of system codes. The experimental methods, procedures, facilities, instrumentation, and supplementary information are consolidated to aid the validation efforts of this work and future projects. These three datasets (824 conditions) are chosen due to their wide acceptance and demonstrated application for code validation. Two experimental datasets from the Nuclear Power Engineering Corporation (NUPEC) span prototypic conditions of Boiling Water Reactors (BWR) and Pressurized Water Reactors (PWR). These datasets are labeled as the BFBT (BWR Full-size Fine-mesh Bundle Test) and the PSBT (PWR Subchannel and Bundle Test) datasets respectively. The third dataset is taken in an internally heated annulus that is scaled based on a BWR subassembly and includes two-phase flows important to post-blowdown analysis. Together, the datasets consider the full range of pressure and mass flux expected in LWR forced convective flows from steady-state to long term cooling conditions. Recognizing the deficiency of available data under low-pressure, low-flow, a new natural circulation dataset consisting of 107 conditions is obtained. With system pressures ranging between 145 and 950 kPa, natural circulation is driven by a heat flux up to 275 kW/m2 in a 3 m long heated region of the annulus test section which is followed by a 2 m long unheated region before entering a condenser. Stable natural circulation flow rates in this facility were measured to be between 182 and 590 kg/m2-s. Pressure and temperature are measured at ten locations in the facility. In addition, measurements of void fraction, interfacial area concentration, and gas velocity are obtained at five axial locations in the annulus test section. The RELAP5-3D code demonstrates good accuracy for void fraction predictions in BFBT and PSBT benchmarks, but shows relatively large discrepancy in the annulus experiments at lower pressures. In two-phase natural circulation, large oscillations are observed in many system parameters during the simulation of 19 experiment cases which were conducted at low pressures, and the model shows good predictive performance with the remaining 88 experiment cases. However, some discrepancies in void fraction and temperature predictions are found which may require improved constitutive modeling under these low-pressure, low-flow condition. The quantified uncertainty in void fraction predictions in three forced convection benchmarks due to uncertainties in boundary conditions and geometries are relatively small, except for a few cases in the annulus experiment. The output uncertainty of the natural circulation model is quantified by considering the measurement error in boundary conditions, and it is shown that the output uncertainty ranges are relatively small for the range of conditions considered. Through this work, a clear pathway is provided for validation of RELAP7 once the code is available.

42 ENGINEERING↗
DOE OSTI2024

a priori uncertainty quantification of reacting turbulence closure models using Bayesian neural networks

While many physics-based closure model forms have been posited for the sub-filter scale (SFS) in large eddy simulation (LES), vast amounts of data available from direct numerical simulations (DNS) create opportunities to leverage data-driven modeling techniques. Albeit flexible, data-driven models still depend on the dataset and the functional form of the model chosen. Increased adoption of such models requires reliable uncertainty estimates both in the data-informed and out-of-distribution regimes. Here, in this work, we employ Bayesian neural networks (BNNs) to capture both epistemic and aleatoric uncertainties in a reacting flow model. In particular, we model the filtered progress variable scalar dissipation rate which plays a key role in the dynamics of turbulent premixed flames. We demonstrate that BNN models can provide unique insights about the structure of uncertainty of the data-driven closure models. We also propose a method for the incorporation of out-of-distribution information in a BNN, which can be used for out-of-distribution query detection. The efficacy of the model is demonstrated by a priori evaluation on a dataset consisting of a variety of flame conditions and fuels.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

A co-registered in-situ and ex-situ dataset from wire arc additive manufacturing process

Recent progress in sensing techniques and data analytics tools have significantly accelerated the development of Wire Arc Additive Manufacturing (WAAM) systems. This data-centric approach emphasizes leveraging sensor data available throughout the production process to optimize performance. Integration of extensive data analysis provides opportunities for improving precision, reducing waste, and enhancing the quality of produced parts. This method relies on AI/ML models and optimization techniques, which are developed using the data collected from various sources, including in-situ sensors, ex-situ imaging, and manufacturing process parameters. The quality and diversity of this data, along with the alignment between different data streams (achieved through spatiotemporal registration) are critical for the successful development of AI/ML and optimization models. In this work, we present a spatiotemporally registered dataset generated during the WAAM process of deposition of a rectangular block. The dataset includes a comprehensive description of the deposition process, process parameters, welding characteristics and acoustic data collected in-situ, and X-Ray Computed Tomography data of the build.

42 ENGINEERING↗
DOE OSTI2026

Roadmap for transforming heterogeneous catalysis with artificial intelligence

Artificial intelligence (AI) is poised to transform heterogeneous catalysis, opening avenues for catalytic materials discovery. By uncovering intricate patterns in high-dimensional data, AI has been reshaping our pursuit of sustainable catalytic processes across the energy, environmental and chemical sectors. This promise, however, hinges on overcoming fundamental barriers, including limitations in data availability and quality, challenges in the generalizability and interpretability of data-augmented decisions, and the persistent gap between in silico predictions and experiments. Furthermore, we outline a forward-looking roadmap for deeply integrating AI into heterogeneous catalysis with an AI-ready data ecosystem, multimodal foundation models, and ultimately autonomous laboratories to accelerate the development of next-generation catalytic technologies via AI-empowered human–machine collaboration.

Computational methods↗
DOE OSTI2021

On closures for reduced order models - A spectrum of first-principle to machine-learned avenues

For over a century, reduced order models (ROMs) have been a fundamental discipline of theoretical fluid mechanics. Early examples include Galerkin models inspired by the Orr–Sommerfeld stability equation and numerous vortex models, of which the von Karman vortex street is one of the most prominent. Subsequent ROMs typically relied on first principles, like mathematical Galerkin models, weakly nonlinear stability theory, and two- and three-dimensional vortex models pioneered the data-driven proper orthogonal decomposition (POD) modeling. In early POD modeling, available data were used to build an optimal basis, which was then utilized in a classical Galerkin procedure to construct the ROM, but data have made a profound impact on ROMs beyond the Galerkin expansion. In this paper, we take a modest step and illustrate the impact of data-driven modeling on one significant ROM area. Specifically, we focus on ROM closures, which are correction terms that are added to the classical ROMs in order to model the effect of the discarded ROM modes in under-resolved simulations. Through simple examples, we illustrate the main modeling principles used to construct the classical ROMs, motivate and introduce modern ROM closures, and show how data-driven modeling, artificial intelligence, and machine learning have changed the standard ROM methodology over the last two decades. Finally, we outline our vision on how the state-of-the-art data-driven modeling can continue to reshape the field of reduced order modeling.

42 ENGINEERING↗
DOE OSTI2024

Circumventing data imbalance in magnetic ground state data for magnetic moment predictions

Abstract Magnetic materials play a crucial role in the transition to more sustainable forms of energy and electric vehicles. There is an anticipated shortage in magnetic materials in the future, and as a result there is an urgent need to discover and design new magnetic materials. Computational magnetic material design using density functional theory is daunting because of the challenge in identifying magnetic ground states from a combinatorially large set of possibilities. Machine learning offers a path forward by enabling efficient surrogate models that can more readily enumerate these states, but there is a dearth of training data available, and what is available tends to be imbalanced with too much non-magnetic data. In this work we show that the discrete and previously tackled data imbalance that exists at the level of the magnetic ordering leads to an imbalanced continuous distribution with many zeros when the data is unraveled at the atomic magnetic moment level, which subsequently leads to models with low accuracy for magnetic properties. We mitigate this by using a two-part model framework. Our scheme is able to classify atoms into magnetic and non-magnetic with an F1 score and Matthew’s correlation coefficient (MCC) of ~91% and then to provide an implicit embedding representation that maps directly onto the magnitude of the magnetic moment with a mean absolute error of 0.1 μ B . Beyond screening for new magnetic materials, we demonstrate an additional practical use case of our scheme: the provision of good initial guesses for magnetic moments in first-principles electronic relaxations. Such initialization is shown to lead to faster convergence to configurations that lie closer to the ground state.

Computer Science↗
DOE OSTI2026

Reduced-Order Modeling of Hydrogen Releases from Vent Stacks and with Wind Effects

Here, the physical release behavior of hydrogen is important to understand from a safety and design perspective. The consequences of unignited pressurized gaseous hydrogen plumes exiting vent stacks were considered by extending and modifying existing general hydrogen plume models. Entrainment, vent stack backpressure, and the flow regime of hydrogen exiting the vent were found to be significant factors affecting plume shape and size, but further investigation and validation with unchoked, low-Froude-number flows is recommended to improve the model’s robustness. Additionally, models for the effects of wind on unignited plume momentum and entrainment were added to explore this behavior. Wind was assumed to increase mixing of hydrogen with the ambient air, and to affect the momentum of the released jet. Introducing wind into the plume model led to a shorter plume for all wind and jet directions. A high counter-flowing wind led to non-physical results and challenges in interpreting the visualization. The proposed jet plume wind sub-models (specifically entrainment coefficients) were fit and compared to experimental data of different releases of hydrogen into a wind tunnel, but the quantity of data available and experimental conditions were limited. Thus, collection of more empirical data and for a wider range of conditions is recommended for improvement of the proposed computational models. Developing reduced-order models for these physical phenomena can improve accessibility to predicted physical behavior and the rate at which hydrogen systems can be safely designed and deployed.

entrainment↗
DOE OSTI2025

Data-driven Community-centered Resilient Assessment and Planning Toolkit for Nexus of Energy and Water (DCRAPT-NEW)

Urban areas, including Detroit and Pittsburgh, have suffered significant dual outages of the electrical and water infrastructure in the past decade due, in part, to the increasing number of extreme weather events. With increasing temperatures and rainfall intensity, these regions need to prepare for increasing extreme events through community-based energy and water resilience analysis, planning, and enhancement. This project developed a suite of open-source, open-access, community-centered, data-driven assessment and distributed energy resource (DER) and planning tools for energy and water resilience enhancement in urban areas. Through establishing a multi-level community awareness and engagement mechanism and a comprehensive collection of power outage and flooding data, an innovative group of community energy and water resilience assessment and planning tools have been developed for a wide range of users with differing and variable sets of data available to them. The developed tools include (1) DOE EAGLE-I data-driven, deep-learning assisted resilience assessment and DER planning tools at the county level with socioeconomic factors incorporated; (2) Utility annual power outage data-driven tools for long term resilience assessment and DER planning and 15-min power outage data-driven tools for short term resilience assessment and planning; (3) Detailed engineering tools for energy and water systems resilience assessment and planning when the system topology and component fragility curves are available; (4) Alternative Resiliency Metric Calculation that extracts and separates outage and restoration processes; and (5) Co-optimization tools that evaluate the resilience of the power and sewage system and allow users to conduct joint planning with energy and wastewater systems. The developed tools provide planners, decision-makers, and stakeholders with powerful capabilities to systematically evaluate system/community resilience and optimal and actionable guidance for enhancing resilience while prioritizing DER investments. The tools have been used and validated in Detroit and Pittsburgh and can be used in other areas of the nation. In addition, this project will (1) advance the knowledge and applications of machine-learning methods in analyzing and fusing different layers of information and generating meaningful data points such as generating rare weather events; (2) significantly improve the energy and water resilience of the identified communities in Detroit and Pittsburgh and prepare for more frequent and severe weather conditions; (3) help communities assess extreme weather event impacts and address short-term and long-term resilience-related issues The developed tools have been made public via GitHub and demonstrated to community stakeholders and utility companies via the two annual workshops and numerous community engagement meetings. The project outcomes are also disseminated through publications in various journals and conference proceedings, and presentations at top conferences.

13 HYDRO ENERGY↗
DOE OSTI2022

Experimental and kinetic modeling study of the low- temperature and high-pressure combustion chemistry of straight chain pentanol isomers: 1-, 2- and 3-Pentanol

Pentanols have received significant attention as a potential alternative fuel or fuel additive owing to their high energy densities and low vapor pressure. The development of robust chemical kinetic models for alternative fuels which can provide accurate and efficient predictions of combustion performance across a wide range of engine relevant conditions is important in developing cleaner, more efficient combustors. Although the high temperature oxidation kinetics of pentanol isomers has been researched considerably, their low temperature combustion chemistry needs further investigation. While previously proposed low temperature mechanisms for 1-pentanol based on analogy and rate rules need further refinement, the low temperature oxidation kinetics of 2-pentanol and 3-pentanol has not been studied previously by any means, experimentally or theoretically. A newly developed kinetic mechanism is presented in this work for the three straight chain pentanol isomers: 1-, 2- and 3-pentanol. Low temperature kinetics is based on a recent study by Lockwood et al., 2022 [20] involving theoretical calculations at the CCSD(T)/cc-pV∞Z level of theory for the oxidation pathways involving alcohol peroxy radicals. Rate of production analyses performed in this study highlight the importance of the newly added pressure-dependent reactions of the α-alcohol peroxy radical forming an RO 2 adduct. While the α-alcohol fuel radical reacts with O 2 to directly decompose via a chemically activated pathway at low pressures, the formation of the RO 2 adduct is favored at high pressures. Furthermore, the detailed model is comprehensively validated against new ignition experiments at low temperature and high pressure, together with the wide range of data available in the literature. Both qualitative and quantitative predictions of the experimental data using the proposed kinetic model are satisfactory for all three pentanol isomers studied here.

1-pentanol↗
DOE OSTI2021

Hyper Suprime-Cam Legacy Archive

Abstract We present the launch of the Hyper Suprime-Cam Legacy Archive (HSCLA), a public archive of processed, science-ready data from the Hyper Suprime-Cam (HSC). HSC is an optical wide-field imager installed at the prime focus of the Subaru Telescope and has been in operation since 2014. While ∼1/3 of the total observing time of HSC has been used for the Subaru Strategic Program (SSP), the remainder of the time is used for Principal Investigator (PI)-based programs. We have processed the data from these PI-based programs and make the processed, high-quality data available to the community through HSCLA. The current version of HSCLA includes data taken in the first year of science operation, 2014. We provide both individual and coadd images as well as photometric catalogs. The photometric catalog from the coadd is loaded to the database, which offers a fast access to the large catalog. There are other online tools such as an image browser and an image cutout tool and they will be useful for science analyses. The coadd images reach 24–27th magnitudes at 5σ for point sources and cover approximately 580 square degrees in at least one filter with 150 million objects in total. We perform extensive quality assurance tests and verify that the photometric and astrometric quality of the data is good enough for most scientific explorations. However, the data are not without problems and users are referred to the list of known issues before exploiting the data for science. All the data and documentations can be found at the data release site, 〈https://hscla.mtk.nao.ac.jp/〉.

Tanaka, Masayuki↗
DOE OSTI2023

Building water resilience in the face of cascading wildfire risks

Severe wildfire is altering the natural and the built environment and posing risks to environmental and societal health and well-being, including cascading impacts to water systems and built water infrastructure. Research on wildfire-resilient water systems is growing but not keeping pace with the scale and severity of wildfire impacts, despite their intensifying threat. In this study, we evaluate the state of knowledge regarding wildfire-related hazards to water systems. We propose a holistic framework to assess interactions and feedback loops between water quality, quantity, and infrastructure hazards as determinants of post-fire water availability and access. Efforts to address the evolving threat of wildfires to water systems will require more interdisciplinary research on the complex relationships shaping wildfire’s threat to water availability and access. To support this, we need reliable long-term data availability, consistent metrics, greater research in shared contexts, more extensive research beyond the burn area, and multistakeholder collaboration on wildfire risks to water systems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Novel Gloeobacterales spp. from Diverse Environments across the Globe

Photosynthetic Cyanobacteria and their descendants are the only known organisms capable of oxygenic photosynthesis. Their metabolism permanently changed the Earth’s surface and the evolutionary trajectory of life, but little is known about their evolutionary history. Genomes of the Gloeobacterales, an order of deeply divergent photosynthetic Cyanobacteria, may hold clues about the evolutionary process. However, there are only three published genomes within this order, and it is difficult to make broad inferences based on such little data. Here, I describe five species within the Gloeobacterales retrieved from publicly available databases and examine their photosynthetic gene content and the environments in which Gloeobacterales genomes and 16S rRNA gene sequences are found. The Gloeobacterales contain reduced photosystems and inhabit cold, wet-rock, and low-light environments. They are likely present in low abundances due to their low growth rate. Future searches for Gloeobacterales should target these environments, and samples should be deeply sequenced to capture the low-abundance taxa. Publicly available databases contain undescribed taxa within the Gloeobacterales. However, searching through all available data with current methods is computationally expensive. Therefore, new methods must be developed to search for these and other evolutionarily important taxa. Once identified, these novel photosynthetic Cyanobacteria will help illuminate the origin and evolution of oxygenic photosynthesis. Early branching photosynthetic Cyanobacteria such as the Gloeobacterales may provide clues into the evolutionary history of oxygenic photosynthesis, but there are few genomes or cultured taxa from this order. Five new metagenome-assembled genomes suggest that members of the Gloeobacterales all contain reduced photosystems and lack genes associated with thylakoids and circadian rhythms. Their distribution suggests that they may thrive in environments that are marginal for other species, including wet-rock and cold environments. These traits may aid in the discovery and cultivation of novel species in this clade.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Polarized Proton Structure in the Resonance Region

In view of the precise data available on inclusive polarized electron scattering off polarized proton targets in the nucleon resonance excitation region, we compare these results with the coherent sum of resonant contributions to the polarized structure function g 1 and virtual photon asymmetry A 1 . To this goal, we employ the nucleon resonance electroexcitation amplitudes determined for photon virtualities Q 2 < 5.0 GeV 2 from analyses of the CLAS data on exclusive electroproduction off protons in the resonance region. Most of the well established resonances of four star PDG status in the mass range up to 1.75 GeV are included. We find that the resonance-like structures observed in the inclusive g 1 data are related to the resonant contributions in the entire range of photon virtuality Q 2 where the data on g 1 are available. In the range of invariant mass of the final hadron system W > 1.5 GeV, the data on the asymmetry A 1 are well reproduced even when accounting for resonant contributions only, especially for the larger values of Q 2 and energies analysed. This observation offers an interesting hint to quark-hadron duality seen in polarized inclusive electron scattering observables.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Distribution Development for the RDX Regional Model at Los Alamos National Laboratory - 20385

Representing uncertainty in model inputs often means finding a balance between uncertainty and physical reality. Developing wide distributions may seem conservative in principle, but this approach may lead to unrealistic model results. Characterizing the current state of knowledge of stochastic inputs presents many challenges, especially if the data available are limited or have limited relevance to the site. Relationships among these inputs may also be important to represent but are typically complex or difficult to define. Often special adjustments must be made to account for reduced credibility in particular data. If parameters are strongly related to one another, a correlation structure may be developed for input to the model. Other techniques such as regression models may be used to incorporate relationships between the information available and the desired parameters. The process of developing distributions must consider details of the model in terms of what the distribution is meant to represent. This paper uses the example of a probabilistic fate and transport model for hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) in the regional aquifer at Los Alamos National Laboratory (LANL). For many parameters, a single draw is applied to all space and time over which the model is run, for a single iteration. This simplification is often made for many reasons, and can often be beneficial, but also adds additional complexity in the distribution development process. Defining the distributional goals as they relate to the modeling process is an important step, which should take place prior to evaluation of the data. Usually, the distributions developed are meant to characterize the average value of the parameter over the spatial and temporal domain of the model. Distribution development requires consideration of many sources of information on the parameter where available, ideally from multiple references. Examples of different sources include data from different references but also from different conditions, measurement methods, or experimental types. Depending on these conditions and the reliability or relevance of particular references, different sources of data may each contribute valuable information but have varying relevance to the site. In these cases, weighting data unequally is a useful way to incorporate this information. As an example, aqueous dispersivity data are available for a variety of rock types. Only a few values are available for the desired rock type, and this is not enough to develop a distribution. Therefore, dispersivity values from other rock types are included in distribution development but are down-weighted such that the best data have the most influence on the distribution developed. In another case, K{sub d} distributions in the model are meant to represent a known composition of multiple soil types. Data from these materials are weighted accordingly to develop a distribution for the weighted average K{sub d} across soil types. Other cases include varying reliability of different sources, and weighting data according to the confidence in these sources. In some cases, input parameters are correlated with one another. An example is advective porosity, which is positively correlated with total porosity and must be less than total porosity. Paired data with both parameters must exist to discern the relationship between the two parameters and if it is necessary to build a correlation structure into the model. In general, correlated parameters may be represented in the model by a multivariate distribution, or perhaps more desirably, capturing the correlation within the developed distributions which may be treated as independent from one another. In the example of porosity, this can be done by transforming advective porosity into a proportion of total porosity which may be drawn independently from the distribution of total porosity. This paper explores how complex data and correlations can be incorporated to meet the distributional goals of the model, using the RDX regional model as a detailed example. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗