Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DISULFIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

On the Formation of Cometary Carbon Disulfide (CS2)

The formation of cometary CS molecules from carbon disulfide, CS2 , was proposed about 20 years before the latter's detection in comet 122P/de Vico by Jackson et al. (2002). However, the origin of CS2 has received little attention from either experimentalists or theorists. As part of our on-going laboratory program to investigate cometary molecules we have examined chemical reactions that lead to CS2 in the solid state. Icy mixtures of known cometary molecules were proton irradiated near 10 K to doses of several eV per molecule. Mid-IR spectroscopy was used as an in situ probe to record both CS2 formation in the ices and the destruction of precursors. We find that the most likely route to cometary CS2 is through OCS by way of the S + CO reaction.

Hudson, Reggie↗

Negative Ion Drift Velocity and Longitudinal Diffusion in Mixtures of Carbon Disulfide and Methane

Negative ion drift velocity and longitudinal diffusion has been measured for gas mixtures of carbon disulfide (CS2) and methane (CH4)' Measurements were made as a function of total pressure, CS2 partial pressure and electric field. Constant mobility and thermal-limit longitudinal diffusion is observed for all gas mixtures tested. Gas gain for some of the mixtures is also included.

Dion, Michael P.↗

Preparation and characterization of polythiophene/molybdenum disulfide intercalation material

Utilizing the solvothermal synthesis technique, lithium intercalated molybdenum disulfide Li{sub x}MoS{sub 2} was expediently obtained, which was allowed to react with water to the formation of single-molecule-layer suspension. The intercalation of polythiophene into MoS{sub 2} was achieved by means of in situ polymerization of the intercalated monomers. The nanocomposite was characterized by X-ray powder diffraction, thermogravimertic analysis and differential scanning calorimetry. It was revealed that the intercalated polymer chain favors the monolayer arrangement with the thiophene rings lying parallel with the host layers. The optimum conditions were explored to prepare the single-phase product with a composition of Li{sub 0.12}(PTP){sub 0.54}MoS{sub 2}. The nanocomposite exhibits enhanced electrical conductivity in the order of 10{sup -2} S cm{sup -1} at ambient temperature, resulted from the incorporation of the electronically conductive polythiophene between the semiconducting host layers and the coupling between the guest conjugated {pi}-orbits and the host layers.

36 MATERIALS SCIENCE↗

Chemical Vapor Deposition of Monolayer Rhenium Disulfide (ReS 2 )

A direct synthesis of monolayer and multilayer ReS 2 by chemical vapor deposition at a low temperature of 450 °C is reported. We performed a detailed characterization of this material using various spectroscopy and microscopy methods. Furthermore initial field-effect transistor characteristics are evaluated, which highlight the potential in being used as an n-type semiconductor.

2D materials↗

Investigation of the structure, filler interaction and degradation of disulfide elastomers made by Reversible Radical Recombination Polymerization (R3P)

In this paper we report the synthesis and analysis of cyclic polydisulfides, their redox depolymerization as well as their interaction with carbon black. Cyclic poly(3,6-dioxa-1,8-octanedithiol)s (pDODT) were synthesized by Reversible Radical Recombination Polymerization (R3P). R3P is a scalable “green” polymerization process using triethylamine (TEA), H 2 O 2 and air for the polymerization of dithiol monomers. pDODTs were synthesized in 5 and 20 g batches. The effect of peroxide concentration (3, 5, 10, 20, 30%) was investigated. It was found that the molecular weights increased exponentially with increasing peroxide concentrations. At 30% peroxide concentration pDODTs with M n up to 400,000 g/mol and polydispersity of 2 were obtained. 700 and 800 MHz NMR were used for investigating the chemical structure of the polymers. The absence of thiol end group signals in polymers made with > 10wt % H 2 O 2 and M n < 100,000 g/mol, including a sample of a fractionated polymer with starting Mn = 600,000 g/mol, verified cyclic structures. Dithiothreitol reduced the polymers to monomer and a small percentage of oligomers. Carbon black was shown to increase the moduli of high molecular weight pDODTs. Swelling tests in chloroform showed that polymers made with 20 and 30w% peroxide swelled 14 and 10 times of their starting weight without dissolving, indicating chemical interaction between the polymers and carbon black. In conclusion, further analysis of these interesting elastomers, available at the 20 g scale, is in progress.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In situ ligand generation for novel Mn(II) and Ni(II) coordination polymers with disulfide ligand: Solvothermal syntheses, structures and magnetic properties

Two coordination polymers, ([Mn{sub 2}(L1){sub 2}(μ{sub 2}-H{sub 2}O)(H{sub 2}O){sub 4}]·5H{sub 2}O){sub n}1 and ([Ni(L1)(H{sub 2}O){sub 2}]·2H{sub 2}O){sub n}2 (H{sub 2}L1=2,2′-dithiobisnicotinic acid), were prepared by the solvothermal reactions of the Mn(II) or Ni(II) ions with 2-mercaptonanicotinic acid. In 1, the [Mn{sub 2}(COO){sub 4}] units are connected by the 2,2′-dithiobisnicotinic dianion to form a two-dimensional (4,4)-connected network. In 2, the adjacent Ni(II) ions are connected by the carboxyl groups of the 2,2′-dithiobisnicotinic dianion to form an one-dimensional inorganic rod-shaped chain [Ni(COO){sub 2}]{sub n}, which are further interconnected by the 2,2′-dithiobisnicotinic ligand, giving rise to a two-dimensional framework. Variable-temperature magnetic susceptibilities of 1 and 2 exhibit overall weak antiferromagnetic coupling between the adjacent metal ions. - Graphical abstract: Two 2D coordination polymers were synthesized by transition-metal/in-situ oxidation of 2-mercaptonicotinic acid. The compounds pack into 2D frameworks by the carboxyl groups of 2,2′-dithiobisnicotinic dianion and exhibit overall weak antiferromagnetic coupling. - Highlights: • Two 2D coordination polymers containing 2,2′-dithiobisnicotinic dianion. • In situ oxidation and dehydro coupling reaction of 2-mercaptonbenzoic acid. • Two compounds display weak antiferromagnetic exchanges.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spontaneous Polarization Suppression of Exciton–Exciton Annihilation in Rhombohedral-Stacked Bilayer Molybdenum Disulfide

Rapid exciton–exciton annihilation (EEA) in two-dimensional semiconductors limits access to high-density excitonic regimes essential for efficient optoelectronic operation under strong excitation. Here, we show that EEA is strongly suppressed in rhombohedral (3R)-stacked MoS 2 bilayers relative to nonpolar 2H bilayers, and that this suppression is quantitatively consistent with repulsive dipole–dipole interactions between layer-polarized excitons induced by spontaneous polarization. Using ultrafast pump–probe spectroscopy, we measure an EEA rate of γ EEA = (5.03 ± 0.99) × 10 –3 cm 2 s –1 in 3R bilayers, which is approximately 18.2-fold smaller than that in monolayers and 2.9-fold smaller than that in nonpolar 2H bilayers. Despite the higher exciton diffusivity recently reported for 3R relative to 2H bilayers, the reduced EEA rate in 3R indicates a rate-limited regime governed by the close-encounter annihilation probability rather than diffusion. A rate-limited annihilation model incorporating a dipole–dipole repulsive potential captures the observed ratio γ EEA,3R /γ EEA,2H ≈ 0.35 for an exciton–exciton encounter distance of ∼1.3 nm, consistent with the bilayer exciton Bohr radius. These results indicate that spontaneous polarization in 3R-stacked bilayers can suppress nonlinear excitonic losses and provide a route toward high-density excitonics.

dipolar excitons↗

In Situ Electron Microscopy Investigation of Sodiation of Titanium Disulfide Nanoflakes

Two-dimensional (2D) metal sulfides show great promises for their potential applications as electrode materials of sodium ion batteries because of the weak interlayer van der Waals interactions which allow the reversible accommodation and extraction of sodium ions. The sodiation of metal sulfides can undergo a distinct process compared to that of lithiation, which is determined by their metal and structural types. Yet, the structural and morphological evolution during its electrochemical sodiation is still unclear. In this report, we studied the sodiation reaction dynamics of TiS 2 by employing in situ transmission electron microscopy and first-principles calculations. During the sodium ion intercalation process, we observed multiple intermediate phases (phase II, phase Ib, and phase Ia), different from its lithiation counterpart, with varied sodium occupation sites and interlayer stacking sequences. Further insertion of Na ions prompted a multi-step extrusion reaction which led to the phase separation of Ti metal from the Na 2 S matrix, with its 2D morphology expanded to a 3D morphology. In contrast to regular conversion electrodes, TiS 2 still maintained a compacted structure after a full sodiation. Frist-principles calculations reveal that the as-identified phases are thermodynamically preferred at corresponding intercalation/extrusion stages compared to other possible phases. The current work provides the fundamental mechanistic understanding of the sodiation process of 2D transition metal sulfides.

25 ENERGY STORAGE↗

[beta subsccript 2]-microglobulin forms three-dimensional domain-swapped amyloid fibrils with disulfide linkages

{beta}{sub 2}-microglobulin ({beta}{sub 2}-m) is the light chain of the type I major histocompatibility complex. It deposits as amyloid fibrils within joints during long-term hemodialysis treatment. Despite the devastating effects of dialysis-related amyloidosis, full understanding of how fibrils form from soluble {beta}{sub 2}-m remains elusive. Here we show that {beta}{sub 2}-m can oligomerize and fibrillize via three-dimensional domain swapping. Isolating a covalently bound, domain-swapped dimer from {beta}{sub 2}-m oligomers on the pathway to fibrils, we were able to determine its crystal structure. The hinge loop that connects the swapped domain to the core domain includes the fibrillizing segment LSFSKD, whose atomic structure we also determined. The LSFSKD structure reveals a class 5 steric zipper, akin to other amyloid spines. The structures of the dimer and the zipper spine fit well into an atomic model for this fibrillar form of {beta}{sub 2}-m, which assembles slowly under physiological conditions.

74 ATOMIC AND MOLECULAR PHYSICS↗

Partial Structure factor determination of liquid carbon dioxide and carbon disulfide

We report the results of neutron and X-ray diffraction experiments as well as MD simulations ofliquid CO2 and liquid CS2 at the same molecular density. We used a combination of the 12C/13Cneutron scattering contrast and the X-ray data (2N+X method) to deduce partial structure factors.Our data give no indication that CO2 is non-linear as has been suggested recently. The partial pairdistributionfunction information is also analyzed within the Bhatia- Thornton formalism and interms of the relative orientation of neighboring molecules. The influence of various model parameterson the thermodynamics and the structure of the molecular liquids can be quantified.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Enhanced ionization of carbon disulfide-doped heteronuclear clusters in intense laser fields and characterization of the doping level

Electron spectra from Ar{sub n} (n{<=}24 000) and doped Ar-CS{sub 2} clusters are studied experimentally at laser intensities of about 10{sup 15} W cm{sup -2}. More than an order of magnitude enhancement in the electron yield is observed in the case of doped Ar-CS{sub 2} clusters. The enhancement observed is argued to be because of the presence of species with low ionization potential, CS{sub 2}, in the cluster. Similar enhancement is also observed in K-shell emission when comparison is done between pure Ar{sub n} and mixed Ar-(CS{sub 2}) clusters under identical experimental conditions of laser irradiation. We also address the effect of doping CS{sub 2} clusters with dopant, Ar, which has higher ionization energy. We demonstrate a simple method for the characterization of doping level based on the Rayleigh scattering measurements.

74 ATOMIC AND MOLECULAR PHYSICS↗

Cross sections for electron scattering by carbon disulfide in the low- and intermediate-energy range

In this work, we report a theoretical study on e{sup -}-CS{sub 2} collisions in the low- and intermediate-energy ranges. Elastic differential, integral, and momentum-transfer cross sections, as well as grand total (elastic + inelastic) and absorption cross sections, are reported in the 1-1000 eV range. A recently proposed complex optical potential composed of static, exchange, and correlation-polarization plus absorption contributions is used to describe the electron-molecule interaction. The Schwinger variational iterative method combined with the distorted-wave approximation is applied to calculate the scattering amplitudes. The comparison between our calculated results and the existing experimental and/or theoretical results is encouraging.

74 ATOMIC AND MOLECULAR PHYSICS↗

Conformational study of quaternary epitope region of V1/V2 loop: influence of disulfide bonds and glycosylations

The HIV-1 envelope spike, which consists of a compact, heterodimeric trimer of the glycoprotein gp120 and gp41, is the sole viral target of neutralizing antibodies. The gp120 component of the viral spike is known to be heavily glycosylated, and glycosylation can affect the conformation of envelope spikes. V1/V2 variable loops of gp120 are key target regions for a number of broadly neutralizing human antibodies, such as PG9 and PG16, CH01-CH04, and PGT141-145. Two glycosylation sites (N156 and N160) have been shown by mutagenesis studies to be important in forming the PG9 and PG16 epitopes. Recently, Peter Kwong and coworkers have resolved crystal structure of V1/V2 domain of HIV-1 gp120 from strains CAP45 and ZM109 complexes with antigen-binding fragment of PG9.

59 BASIC BIOLOGICAL SCIENCES↗