SEARCH · Engineering Papers

Results for “DIPS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Design of multihundred-watt dynamic isotope power system for robotic space missions

The design of a multihundred-watt dynamic isotope power system (DIPS) based on the US Department of Energy (DOE) general-purpose heat source (GPHS) and small (multihundred-watt) free-piston Stirling engine (FPSE) is described as a potential lower cost alternative to radioisotope thermoelectric generators (RTGs). The design is targeted at the power needs of future unmanned deep space and planetary surface exploration missions. Since the competitive potential of FPSE as an isotope convertor was first identified, work has focused on the feasibility of directly integrating GPHS with the Stirling heater head. Thermal modeling of various radiatively coupled heat source/heater head geometries has been performed using data furnished by the developers of FPSE and GPHS. The analysis indicates that, for the 1050 K heater head configurations considered, GPHS fuel clad temperatures remain safe operating limits under all conditions including shutdown of one engine on a twin engine unit. Based on these results, preliminary characterizations of multihundred-watt units have been established. They indicate that, per electrical watt, the GPHS/small Stirling DIPS will be roughly equivalent to MOD RTG in size and mass but will require about a third the amount of isotope fuel.

Bents, D. J.↗

NASA NTRS1991

A dynamic isotope power system portable generator for the moon or Mars

The dynamic isotope power systems (DIPS) demonstration program is focused on a standardized 2.5 kWe portable generator for multiple uses on the lunar or Martian surface. A variety of potential remote or mobile applications has been identified by NASA. These applications include remote power to science packages, surface rovers for both short and extended duration missions, and backup to central base power. Reviews conducted on alternative power sources for these applications are described. These include the comparison of DIPS to regenerative fuel cells (RFCs). Recent work is presented refining the 2.5 kWe design to assure compatibility with the Martian environment while imposing only a minor mass penalty on lunar operations. This was accomplished by limiting temperatures, except in the heat source unit (HSU), to the nonrefractory materials regime and protecting the necessary refractories in the HSU from the environment. Design changes to the HSU are described. Work related to recent concerns regarding astronaut radiation doses is described. This work includes the bases for the calculations to determine the necessary shielding or operational limitations.

Johnson, Richard A.↗

NASA NTRS1992

Ginga observations of Centaurus X-3

Attention is given to a series of observations of Centaurus X-3 made with Ginga on March 22-24, 1989, over a complete orbital cycle. The data set includes a preeclipse dip, the eclipse ingress and egress, the eclipse itself, and a phase of high steady emission after egress. The mideclipse ephemeris obtained yields an estimate of the rate of change of the orbital period of -(1.738 +/- 0.004) x 10 exp 6/yr, confirming the rate of change reported by Kelley et al. (1983) and improving the precision by a factor of 20. The pulse profiles obtained with Ginga during the high postegress phase are double-peaked at low energies, and show a reversal of phase of 180 deg. No pulsations are detected during the eclipse and at low energies during the preeclipse dip, indicating that X-ray emission at these phases is due to scattering by extended matter. The energy of the iron emission line varies between 6.5 and 6.7 keV during the observation, while its equivalent width varies between 0.18 and 1.5 keV.

Nagase, F.↗

NASA NTRS1992

Thermal buoyancy on Venus - Underthrusting vs subduction

The thermal and buoyancy consequences of the subduction endmember are modeled in an attempt to evaluate the conditions distinguishing underthrusting and subduction. Thermal changes in slabs subducting into the Venusian mantle with a range of initial geotherms are used to predict density changes and, thus, slab buoyancy. Based on a model for subduction-induced mantle flow, it is then argued that the angle of the slab dip helps differentiate between underthrusting and subduction. Mantle flow applies torques to the slab which, in combination with torques due to slab buoyancy, act to change the angle of slab dip.

Burt, Jeffrey D.↗

NASA NTRS1992

Evidence for unseen companions around T Tauri stars

The observed spectral energy distributions of HK Tau, T Tau, and R Y Tau exhibit shallow (but significant) dips at mid-infrared wavelengths. This behavior can be explained by the existence of discrete gaps in their circumstellar disks since, if the temperature in the disks decreases monotonically outward, a gap would result in a range of "missing" temperatures. The gap centers for the three objects occur at radial distances of 0.5, 1.4, and 1.6 AU, respectively, while the corresponding ratios of outer to inner radii of the gaps are 6:1, 7:1, and 15:1, respectively. Larger mid-infrared dips are observed for SU Aur and GM Aur and are interpreted as correspondingly larger gaps, with almost complete clearing of the inner region of the disk in the latter case. The gaps in all cases are consistent with the tidal effects of either companion stars or planets.

Marsh, Kenneth A.↗

NASA NTRS1990

Holographic enhanced remote sensing system

The Holographic Enhanced Remote Sensing System (HERSS) consists of three primary subsystems: (1) an Image Acquisition System (IAS); (2) a Digital Image Processing System (DIPS); and (3) a Holographic Generation System (HGS) which multiply exposes a thermoplastic recording medium with sequential 2-D depth slices that are displayed on a Spatial Light Modulator (SLM). Full-parallax holograms were successfully generated by superimposing SLM images onto the thermoplastic and photopolymer. An improved HGS configuration utilizes the phase conjugate recording configuration, the 3-SLM-stacking technique, and the photopolymer. The holographic volume size is currently limited to the physical size of the SLM. A larger-format SLM is necessary to meet the desired 6 inch holographic volume. A photopolymer with an increased photospeed is required to ultimately meet a display update rate of less than 30 seconds. It is projected that the latter two technology developments will occur in the near future. While the IAS and DIPS subsystems were unable to meet NASA goals, an alternative technology is now available to perform the IAS/DIPS functions. Specifically, a laser range scanner can be utilized to build the HGS numerical database of the objects at the remote work site.

Iavecchia, Helene P.↗

NASA NTRS1992

The x ray variability of NGC6814: Power spectra

Simulation techniques are used to obtain the X-ray variability power spectrum of unevenly sampled GINGA data from NGC6814. A simple power law is not an adequate description of the power spectrum, with the residuals showing excess power on timescales consistent with the periodicity seen in EXOSAT observations of this object. However the shape of the folded lightcurve is very different, with 3 main peaks, two of which are separated by an extremely sharp dip instead of the single peak and small harmonic structure observed by EXOSAT. Using the dip as a fiducial mark, a second GINGA observation of this source taken one year later is found to be consistent with being completely periodic and phase coherent with this first GINGA observation. Thus the period is consistent with being constant over a period of 6 years, but phase coherence is only maintained on timescales of approximately 1 year. Over 75 percent of the total source variability is due to the periodic component (r.m.s. amplitude of 36 percent). The residual variability can be described as the more usual 'flicker noise' f(exp -1.1) powerlaw. This shows no apparent high frequency break on timescales greater than 300 seconds. Subtle differences in the shape of the folded light curve with energy, and the very large amount of power in the periodic component suggest occultation as its origin, though amplification of variability from an X-ray emitting 'hot spot' at the disk inner radius through gravitational lensing is also possible. The former suffers from the very arbitrary nature of the periodic timescale, while the latter is unattractive as it cannot simply explain the lack of high frequency break in the residual power. That these models probably fail to provide an adequate explanation may be due to the added complexity of anisotropy of the X-ray emission, suggested by the discrepancy between the lack of soft photons implied by the flat spectrum and the copious source of soft photons available from reprocessing in the iron line producing material.

Done, C.↗

NASA NTRS1991

Versatile dynamic isotope power systems for the exploration of space

Dynamic, isotope-heated power systems are needed to carry out the exploration of space and are major elements identified by NASA for the Space Exploration Initiative (SEI). The Dynamic Isotope Power System (DIPS) Demonstration Program is aimed at establishing the advanced technology as well as the system designs and hardware for the SEI and other exploratory missions. Several conceptual designs of DIPS systems have been developed to provide compact, reliable, and long-lived power systems.

Johnson, Richard A.↗

NASA NTRS1992

Dynamic Isotope Power System Design Considerations for Human Exploration of the Moon and Mars

Dynamic Isotope Power System (DIPS) alternatives for the surface mission elements associated with a lunar base and subsequent manned Mars expedition were investigated, emphasizing the issue of how the mission environment affects system design. It was found that radiation shielding for human-rated applications has a greater impact on DIPS than any other factor.

Bents, D. J.↗

NASA NTRS1993

Do the spectral energy distributions of GK Tauri and HK Tauri indicate the presence of planetary companions?

The interpretation of the spectral dips of three objects (DF Tau, GK Tau, and HK Tau) for which lunar occultation data are available is discussed. Arguments against an alternate interpretation of the spectral dips (the 'disk-shell' model) are presented, and lunar occultation data are used to constrain the properties of the inferred orbiting companions. In the case of DF Tau, the occultation data indicate a stellar mass companion whose orbital radius is consistent with the present inferred gap location. For GK Tau and HK Tau, no such companions are visible, which suggests that the companions responsible for the inferred gaps are substellar. In either case, the estimated gap width is not consistent with a single orbiting body, but is consistent with a group of planets or planetesimals.

Marsh, Kenneth A.↗

NASA NTRS1993

Considerations of variations in ionospheric field effects in mapping equatorial lithospheric Magsat magnetic anomalies

The longitudinal, seasonal, and altitude-dependent variability of the magnetic field in equatorial latitudes is investigated to determine the effect of these variabilities on the isolation of lithospheric Magsat magnetic anomalies. It was found that the amplitudes of the dawn dip-latitude averages were small compared to the dusk averages, and that they were of the opposite sign. The longitudinal variation in the equatorial amplitudes of the dawn dip-latitude averages was not entirely consistent with the present knowledge of the electrojet field. Based on the results, a procedure is implemented for reducing the equatorial ionospheric effects from the Magsat data on the lithospheric component.

Ravat, D.↗

NASA NTRS1993

The equatorial electrojet and associated currents as seen in Magsat data

In view of the disagreement between reports of Langel and Estes (1985) and those of other investigators using Nagsat data sets, concerning the evidence for equatorial electrojet and meridional currents in the dawn Magsat data, this paper reexamines the Magsat data for the presence of equatorial electrojet and meridional current in both dawn and dusk local times, using a specially designed method for isolating field variations organized by dip-latitude. It is shown that such fields, if any, at dawn are very weak and do not result in a persistent pattern from longitude to longitude or a pattern consistent with that expected from an electrojet current. On the other hand, fields organized by dip-latitude are clearly present in the dusk data and it is possible to isolate longitudinal and seasonal variations in such fields. Current densities are computed for both the equatorial electrojet and meridional currents and are compared to the current densities and distributions found with recent models of the ionospheric dynamo and equatorial electrojet.

Langel, R. A.↗

NASA NTRS1994

Josephson Junctions Help Measure Resonance And Dispersion

Electrical characteristics of superconducting microstrip transmission lines measured at millimeter and submillimeter wavelengths. Submicron Josephson (super-conductor/insulator/superconductor) junctions used as both voltage-controlled oscillators and detectors to measure frequencies (in range of hundreds of gigahertz) of high-order resonant electromagnetic modes of superconducting microstrip transmission-line resonators. This oscillator/detector approach similar to vacuum-tube grid dip meters and transistor dip meters used to probe resonances at much lower frequencies.

Javadi, Hamid H. S.↗

NASA NTRS1993

Wrinkle ridges of Arcadia Planitia, Mars

Wrinkle ridges of Arcadia Planitia were examined to determine their morphology, spatial distribution, and the amount of crustal shortening and strain they accommodate. Ridges trend generally northward, but their orientation and distribution are strongly controlled by the relief of the underlying hobby material. Ridges begin or end at inselbergs of older terrain and are associated with buried craters. Arcadia Planitia ridges have an average width of 3425 m and accommodate an average folding shortening of 3 m and a faulting shortening of 55 m; mean total shortening is 57 m. Three east-west transects were constructed at 20 deg 25 deg and 28 deg N to estimate regional shortening and strain. Average total shortening across the transects is about 900 m, corresponding to a regional compressive strain of 0.06 percent. The total shortening and compression across Arcadia Planitia are less than in Lungae Planum. Faults associated with the Arcadia ridges are inferred to have a westward dip compared with an eastward dip for Lungae Planum ridges. The general levels of compression and symmetric orientation of the ridges suggest a regionally organized stress system.

Plescia, J. B.↗

NASA NTRS1994

Power Systems for Future Missions: Appendices A-L

Selection of power system technology for space applications is typically based on mass, readiness of a particular technology to meet specific mission requirements, and life cycle costs (LCC). The LCC is typically used as a discriminator between competing technologies for a single mission application. All other future applications for a given technology are usually ignored. As a result, development cost of a technology becomes a dominant factor in the LCC comparison. Therefore, it is common for technologies such as DIPS and LMR-CBC to be potentially applicable to a wide range of missions and still lose out in the initial LCC comparison due to high development costs. This collection of appendices (A through L) contains the following power systems technology plans: CBC DIPS Technology Roadmap; PEM PFC Technology Roadmap; NAS Battery Technology Roadmap; PV/RFC Power System Technology Roadmap; PV/NAS Battery Technology Roadmap; Thermionic Reactor Power System Technology Roadmap; SP-100 Power System Technology Roadmap; Dynamic SP-100 Power System Technology Roadmap; Near-Term Solar Dynamic Power System Technology Roadmap; Advanced Solar Dynamic Power System Technology Roadmap; Advanced Stirling Cycle Dynamic Isotope Power System Technology Roadmap; and the ESPPRS (Evolutionary Space Power and Propulsion Requirements System) User's Guide.

Gill, S. P.↗

NASA NTRS1994

Evidence for X-ray flux and spectral modulation by absorption in NGC 6814. 1: The nature of the most rapid variability

The Seyfert 1 galaxy NGC 6814 was observed using the Japanese X-ray astronomy satellite Ginga in 1990 April and October. The rapid variability characteristically associated with this source was reconfirmed. Specifically, three dips were found in the April observation in which the flux dropped to nearly zero in approximately 300 s. The doubling timescale was approximately 50 s. A similar but separated drop and rise in flux was observed in the October data, different in that the flux did not decrease completely to zero. A detailed analysis of the data around the structures of most rapid variability found spectral variability and lags in flux between different energy bands. Lags were on the order of a few to tens of seconds for the April data, and on the order of tens to a couple of hundred seconds for the October data. The sense of the lags was such that during flux decreases the hard flux lagged, while during flux increases the soft flux lagged. Associated significant apparent hardening of the spectrum at low flux was observed in the April data. Apparent hardening of the spectrum also occurred in the October flux decrease, to a photon index of GAMMA = 0.85; however, the spectrum softened at lowest flux to the index of the predecrease level, GAMMA = 1.54. In the April dips, the line flux was found to decrease significantly. A marginal decrease in line flux was also observed in the October data. The variability of the line flux reconfirmed the result of Kunieda et al. (1990), who found that the line production region must be within approximately 300 light-seconds from the source. To explain the observational results, a variable-absorption model was proposed, in which the column density was assumed to vary as a function of time. Other physical processes, including intrinsic spectral changes and warm absorber models, which could account for the fastest variability, could be ruled out by the results of the data analysis. A primary constraint found for geometrical models is that the material which is doing the absorption must have relatively low ionization (xi less than 100). This result leads to severe constraints on a general orbiting cloud model, requiring high densities (n approximately 10(exp 16)/cu cm) and sheetlike geometry.

Leighly, Karen↗

NASA NTRS1994

The high-state/low-state transition in V794 Aquilae

We present a V-magnitude light curve of the cataclysmic binary V794 Quilae covering an 800 day time span. The system shows variations of ups to 3 mag. In particular, there are two dips of approximately 1 mag which last for about 50 days, and are followed by a rapid recovery to the original brightness, and a third dip of approximately 3 mag lasting about 100 days. These fluctuations are thought to be caused by the response of the accretion disk in the system to the cessation of mass transfer from the mass-losing secondary star. We present computations using a time-dependent accretion disk code to delineate a range of allowed behavior for th accretion disk. To model the observed light curve, we require that the model parameters alpha(sub cold) and alpha(sub hot), which characterize the degree of coupling of the viscous dissipation to the orbital shear in the low and high states of the accretion disk, be smaller than they have been inferred to be in the dwarf novae, and that the ratio alpha(sub hot)/alpha(sub cold) also be smaller. The fact that alpha seems to vary with the rate of mass transfer may provide support for the model of Vishniac and Diamond, in which the impact of the mass transfer stream onto the outer edge of the accretion disk excites internal waves which transport angular momentum outward and provide the viscous dissipation.

Honeycutt, R. Kent↗

NASA NTRS1994

The magnetic field of solar prominences

A model is presented which accounts for the formation of coronal magnetic field lines with the appropriate 'dipped' structure to support prominences. The critical ingredients of the model are that the prominence magnetic field is a truly three-dimensional structure with significant variation along the prominence length, and the magnetic field is strongly sheared near the photospheric neutral line. Numerical calculations are presented which demonstrate that these two features lead to dip formation. In addition our model is able to account for the long-puzzling observation of inverse polarity in quiescent prominences.

Antiochos, S. K.↗