Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DATA CONVERSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

In-Situ Detection of Process-Induced Porosity During Cure of Out-of-Autoclave Composites

Composite materials offer unique benefits in aerospace applications, including high strength-to-weight ratio, and are becoming increasingly used by industry manufacturers. Current manufacturing and processing methods can lead to defects in the composites, which are identified after fabrication using inspection methods. This study utilized a high-temperature ultrasonic inspection system to detect process-induced porosity in an out-of-autoclave (OOA) composite panel during cure. In order to perform ultrasonic scans in-situ during cure, the system needed to be able to operate at oven temperatures up to 200 °C. There are no commercially available ultrasonic scanning systems that can operate continuously at these temperatures, so an enclosure was fabricated to insulate the ultrasonic system in the curing oven. The enclosure housed a MISTRAS® motorized X-Y raster scanner and contact transducer (Olympus® X2002). The Olympus® X2002 contact transducer is a continuous high-temperature delay line transducer with a center frequency of 2.25 MHz. In order to prevent the inside of the enclosure from reaching high temperatures, a sparge pipe inside the cooling enclosure was connected to a liquid nitrogen (LN2) tank outside of the oven via insulated hoses. The cooling system was automatically controlled by a temperature controller that was programmed to open a solenoid valve along the hose at 31 ℃ and close at 28 ℃ inside the cooling enclosure. When the solenoid valve was open, LN2 would flow from the LN2 tank and vaporize prior to reaching cooling enclosure. A U-shaped sparge pipe had holes drilled along its length to uniformly introduce cold nitrogen gas into the cooling enclosure. This prevented the motors from ever reaching the maximum desired operating temperature of 38 ℃. In the bottom of the enclosure, the tool plate was placed with the composite facing the outside of the enclosure, exposing it to the temperatures of the oven. The tool plate was 63.5 mm thick borosilicate glass, which was chosen for its low ultrasonic attenuation and moderate thermal conductivity. A thin layer of ultrasonic couplant was placed on the tool plate. The transducer sent and received ultrasonic waves through the tool plate into the composite. A MISTRAS® Remote UT System performed all wave generation, analog to digital conversion, and data acquisition and processing. The transducer was connected directly to the Remote UT System via a high-temperature BNC cable (CD International, RG-316). Polyimide insulated copper wire was used to connect the scanner to a 2-axis motor drive, which was connected to the Remote UT System. The motor drive and Remote UT System were located outside the industrial oven. A diagram of the ultrasonic system is shown in Figure 1. Figure 1: Diagram of ultrasonic in-situ defect detection system. In this study, a porosity gradient was introduced into the carbon fiber reinforced polymer (CFRP) composite through a misfit of the part and caul plate. A 24-ply quasi-isotropic ([0/90, ±45]12S) composite panel was laid up using Newport® AS4C-M/NB321 out-of-autoclave (OOA) plain weave (PW) prepreg (42% resin content, 195 g/m2). The first 16 plies were 203 mm × 203 mm. Ply drops were incorporated into the panel by decreasing the length of plies 17-24. The sizes of each ply are included in Table 1. All plies were centered along their length (x-axis) creating a trapezoidal type cross-section. Table 1: Ply sizes Plies Length (mm) Width (mm) 1-16 203 203 17-18 102 203 19-20 85 203 21-22 68 203 23-24 51 203 A 15-5 stainless steel caul plate (Size: 203 × 203 × 1.2 mm) was placed on the laminate. The composite and caul plate were vacuum bagged to the tool plate. Per the product datasheet, Newport 321 can be cured between 121 °C and 149 °C, depending on service temperature, with a hold for 90-120 minutes. Based on prior thermal testing of the cooling enclosure, the desired composite temperature cycle could be attained when the air temperature of the oven was ramped to 160 °C at a rate of 1.7 °C/min with a 3 hour hold. The extended hold was not necessary to cure the composite, but did allow for additional scans at the cure temperature during preliminary testing. The composite panel was under vacuum pressure for the entire cure cycle. Under vacuum, the caul plate deformed causing high and low pressure regions. The low-pressure regions formed high porosity in the composite part. The ultrasonic data collected showed that the inspection system was able to monitor the evolution of porosity within the composite throughout the cure cycle. Fifty scans of a 203 mm × 51 mm (8 in. × 2 in.) area of the composite were completed throughout the cure cycle. The scan speed was set to 43 mm/s in the x-direction and 36 mm/s in the y-direction, with a 1.0 mm/pixel resolution in both directions. Each scan took approximately five minutes to complete. Figure 2 shows C-scan amplitude data (top view) from one scan during the cure cycle. The color map indicates the maximum amplitude (%) measured with a time gate that contains reflections from the back surface (furthest from the transducer in contact with the caul plate) of the composite. Because porosity in the composite increases the ultrasonic attenuation in the composite part, a higher amplitude (red) indicates low porosity and a lower amplitude (blue) indicates high porosity. The regions where the caul plate was applying increased pressure (center and ends of the panel) resulted in reduced porosity, whereas the ply drop regions had reduced pressure and thus had higher porosity. Figure 2: Amplitude C-scan (top view) of OOA composite from one scan during the 160 °C temperature hold. Higher amplitude (red) indicates low porosity. Lower amplitude (blue) indicates high porosity. A B-scan is a two-dimensional image plotting the ultrasonic signals from a single y-position at every x-location of the composite panel. The travel time (μs) of the ultrasonic wave (representing the through-thickness location) is plotted along the y-axis, and the ultrasonic wave signal is represented as a contour map. Based on the B-scan data, the location of the defects with respect to the composite thickness was able to be determined. The ply drop regions had high porosity near the front (tool plate) surface of the composite (Figure 3). Figure 3: B-scan (cross-section view) of OOA composite from one scan during the 160 °C temperature hold. Using the data obtained from amplitude C-scans and B-scans throughout the cure cycle, the high and low porosity regions within the composite laminate were detected and localized with high spatial resolution. This paper will discuss the evolution of porosity content in the OOA composite during cure. OOA tests aided the transition of this system to an autoclave, which is the primary method of curing aerospace-grade thermoset composites.

Tyler B. Hudson↗

Wind Tunnel Performance Tests of a Full-Scale Proprotor on the Tiltrotor Test Rig

The Tiltrotor Test Rig (TTR) is a new, large-scale proprotor test system for the National Full-Scale Aerodynamics Complex (NFAC). The TTR was jointly developed by NASA, the U. S. Army and the U. S. Air Force. The first wind-tunnel entry was completed in November 2018 with a modern, 26-ft diameter proprotor. The primary purpose was to complete the development of the TTR, including systems integration with the NFAC. The TTR and rotor were tested up to 273 knots in axial flow, which is the highest airspeed ever achieved by a full-scale proprotor in any wind tunnel. The entry constitutes the first full-scale wind-tunnel test of a gimballed, coning-flexure rotor. Extensive conversion-mode data were also acquired, and hover/climb conditions were explored. Additional testing included aerodynamic tares, motor tests, thermal tests, modal vibration tests, and other checkout activities. This report summarizes the results of the test, including examples of the most significant data.

Tiltrotor Test Rig↗

Thermal Analysis of the Advanced Modular Power Systems (AMPS) Power Electronic Modules

In an effort to transform future space power system architectures and operations, the Advanced Modular Power Systems (AMPS) project is currently developing an interface standard for power electronic modules to enable modular architectures for space power systems. Each architecture would consist of one or more modular electronic units (MEU) that would comprise of a tailored combination of modules. The standard currently comprises modules enabling switchgear, power conversion, and data interfacing. The objective of the AMPS project is to enable the modularity and interchangeability of different architectures using these standardized modules in hopes of reducing complexity and cost, increasing inherent redundancy and reliability, and minimizing power system redesign for future programs. A key enabler to these future modular architectures will be the thermal management system, which has to contend with acquiring heat from the electronics modules at the card level and then transporting that heat to the radiator of the larger system. The focus of this paper, therefore, will be the thermal design and analysis of multiple AMPS power electronics modules and the development of their thermal-vacuum test.

Modular Power Electronics↗

Open-Source GIS

The components making up an Open Source GIS are explained in this chapter. A map server (Sect. 30.1) can broadly be defined as a software platform for dynamically generating spatially referenced digital map products. The University of Minnesota MapServer (UMN Map Server) is one such system. Its basic features are visualization, overlay, and query. Section 30.2 names and explains many of the geospatial open source libraries, such as GDAL and OGR. The other libraries are FDO, JTS, GEOS, JCS, MetaCRS, and GPSBabel. The application examples include derived GIS-software and data format conversions. Quantum GIS, its origin and its applications explained in detail in Sect. 30.3. The features include a rich GUI, attribute tables, vector symbols, labeling, editing functions, projections, georeferencing, GPS support, analysis, and Web Map Server functionality. Future developments will address mobile applications, 3-D, and multithreading. The origins of PostgreSQL are outlined and PostGIS discussed in detail in Sect. 30.4. It extends PostgreSQL by implementing the Simple Feature standard. Section 30.5 details the most important open source licenses such as the GPL, the LGPL, the MIT License, and the BSD License, as well as the role of the Creative Commons.

Vatsavai, Raju↗

Identifying and bounding uncertainties in nuclear reactor thermal power calculations

Determination of the thermal power generated in the reactor core of a nuclear power plant is a critical element in the safe and economic operation of the plant. Direct measurement of the reactor core thermal power is made using neutron flux instrumentation; however, this instrumentation requires frequent calibration due to changes in the measured flux caused by fuel burn-up, flux pattern changes, and instrumentation drift. To calibrate the nuclear instruments, steam plant calorimetry, a process of performing a heat balance around the nuclear steam supply system, is used. There are four basic elements involved in the calculation of thermal power based on steam plant calorimetry: The mass flow of the feedwater from the power conversion system, the specific enthalpy of that feedwater, the specific enthalpy of the steam delivered to the power conversion system, and other cycle gains and losses. Of these elements, the accuracy of the feedwater mass flow and the feedwater enthalpy, as determined from its temperature and pressure, are typically the largest contributors to the calorimetric calculation uncertainty. Historically, plants have been required to include a margin of 2% in the calculation of the reactor thermal power for the licensed maximum plant output to account for instrumentation uncertainty. The margin is intended to ensure a cushion between operating power and the power for which safety analyses are performed. Use of approved chordal ultrasonic transit-time technology to make the feedwater flow and temperature measurements (in place of traditional differential-pressure- based instruments and resistance temperature detectors [RTDs]) allows for nuclear plant thermal power calculations accurate to 0.3%-0.4% of plant rated power. This improvement in measurement accuracy has allowed many plant operators in the U.S. and around the world to increase plant power output through Measurement Uncertainty Recapture (MUR) up-rates of up to 1.7% of rated power, while also decreasing the probability of significant over-power events. This paper will examine the basic elements involved in calculation of thermal power using ultrasonic transit-time technology and will discuss the criteria for bounding uncertainties associated with each element in order to achieve reactor thermal power calculations to within 0.3% to 0.4%. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Diminiode thermionic conversion with 111-iridium electrodes

Preliminary data indicating thermionic-conversion potentialities for a 111-iridium emitter and collector spaced 0.2 mm apart are presented. These results comprise output densities of current and of power as functions of voltage for three sets of emitter, collector, and reservoir temperatures: 1553, 944, 561 K; 1605, 898, 533 K; and 1656, 1028, 586 K. For the 1605 K evaluation, estimates produced work-function values of 2.22 eV for the emitter and 1.63 eV for the collector with a 2.0-eV barrier index (collector work function plus interelectrode voltage drop) corresponding to the maximum output of 5.5 W/sq cm at 0.24 volt. The current, voltage curve for the 1656 K 111-iridium diminiode yields a 6.2 W/sq cm maximum at 0.25 volt and is comparable with the 1700 K envelope for a diode with an etched-rhenium emitter and a 0.025-mm electrode gap made by TECO and evaluated by NASA.

Koeger, E. W.↗

Procedure for extraction of disparate data from maps into computerized data bases

A procedure is presented for extracting disparate sources of data from geographic maps and for the conversion of these data into a suitable format for processing on a computer-oriented information system. Several graphic digitizing considerations are included and related to the NASA Earth Resources Laboratory's Digitizer System. Current operating procedures for the Digitizer System are given in a simplified and logical manner. The report serves as a guide to those organizations interested in converting map-based data by using a comparable map digitizing system.

Junkin, B. G.↗

Program documentation crew system vidar data reduction (CSVIDR) program

The Crew System Vidar Data Reduction (CSVIDR) program was written to process selected portions of data acquired from long term tests of space shuttle crew equipment. Data are recorded on a seven track computer compatible tape using the Vidar autodata eight processing system. The input tape is in a six bit binary coded decimal format. The 1110 hardware conversion option is used to convert all data from a BCD format to Fieldata since the majority of the data is output without further conversion. Data is retrieved from a character string, calibrated, tabulated, printed, and output on a fixed sample rate tape for use as input to a general purpose plot program.

Vanwie, H. B.↗

EGS Collab Testbed 1: Temperature profile

This submission includes an input file, plot file, Fortran conversion file, and 3D data file from the simulation of the temperature profile within the Test Bed #1 of the EGS Collab project. The simulation was executed with PNNL's STOMP-GT simulator, which reads the input file, and produces the STOMP-GT Simulated 2D Temperature Distribution Data (plot.001302 file). The Fortran conversion file, converts the STOMP-GT Simulated 2D Temperature Distribution Data (plot.001302) 2D results in local coordinates to 3D results in Homestake coordinates.

15 GEOTHERMAL ENERGY↗

Conversion of Coal in a Fluidized Bed Chemical Looping Combustion Reactor with and without Oxygen Uncoupling

Chemical looping combustion (CLC) is a carbon capture technology that involves circulating metal-based oxygen carrier particles between two reactors, where the metal is alternately oxidized by air and then reduced by fuel as the fuel combusts. In the variant of CLC known as chemical looping with oxygen uncoupling (CLOU), the oxygen carrier releases gaseous O 2 in the fuel reactor, allowing for a rapid reaction with solid fuels. This study focuses on improving the understanding of mechanisms responsible for carbon conversion of coal and coal char in a bench-scale fluidized bed reactor using oxygen carriers with and without oxygen uncoupling properties. Effects of coal particle size and temperature on the rate of carbon conversion are evaluated in order to quantify performance and to aid in design and modeling of large-scale fully circulating chemical looping systems. The data confirms that conversion with a copper-based CLOU carrier is faster and results in lower CO and CH 4 concentrations than the natural ore ilmenite, which does not have CLOU properties. Furthermore, with coal as fuel, the increase in the rate of char carbon conversion with CLOU is lower than that previously reported because of competition for oxygen by volatiles. Conversion is also faster with smaller particles but results in higher CO concentrations as small particles gasify and release volatiles more quickly.

01 COAL, LIGNITE, AND PEAT↗

Generating Solid Models from Topographical Data

A method of generating solid models of terrain involves the conversion of topographical data into a form useable by a rapid-prototyping (RP) machine. The method was developed to enable the use of the RP machine to make solid models of Martian terrain from Mars Orbiter laser-altimeter topographical data. The method is equally applicable to the generation of models of the terrains of other astronomical bodies, including other planets, asteroids, and Earth. Topographical data describe a terrain in terms of a set of three-dimensional coordinates [e.g., Cartesian (x,y,z) or polar (latitude, longitude, radius) coordinates] of points or nodes on the terrain surface. The input data for the RP machines are required to provide a three-dimensional description, not of a single surface, but of a volume in this case, a ground volume that underlies the terrain surface. The description is required to be in the form of triangular elements that connect the nodes of all the surfaces and that completely bound the volume, with no open areas, no overlap of triangles, and no extraneous geometric elements. The software used in the present model-generation method was written in IDL - an advanced programming language that affords a number of tools, including subroutines that triangularize surfaces. The software creates a volume from the topographical surface data by adding sides to the edges of the terrain surface and joining the sides with a bottom surface. Each of the sides is triangularized by use of IDL subroutines, and then the software searches for extraneous elements and removes them. Topographical data are usually presented in a grid corresponding to polar coordinates, so that a model generated from such data is equivalent to a topographical map in Mercator projection. However an RP machine is fully capable of including the curvature of a planetary body in a model that it makes. Therefore, the software also offers a capability to transform the topographical data to a projection onto a surface having a curvature corresponding to that of the surface of the modeled planet.

Keller, John W.↗

A Posteriori Ontology Engineering for Data-Driven Science

Science—and biology in particular—has a rich tradition in categorical knowledge management. This continues today in the generation and use of formal ontologies. Unfortunately, the link between hard data and ontological content is predominately qualitative, not quantitative. The usual approach is to construct ontologies of qualitative concepts, and then annotate the data to the ontologies. This process has seen great value, yet it is laborious, and the success to which ontologies are managing and organizing the full information content of the data is uncertain. An alternative approach is the converse: use the data itself to quantitatively drive ontology creation. Under this model, one generates ontologies at the time they are needed, allowing them to change as more data influences both their topology and their concept space. We outline a combined approach to achieve this, taking advantage of two technologies, the mathematical approach of Formal Concept Analysis (FCA) and the semantic web technologies of the Web Ontology Language (OWL).

Gessler, Damian Dg↗

Reaching the Excitonic Limit in 2D Janus Monolayers by In Situ Deterministic Growth

Abstract Named after the two‐faced Roman god of transitions, transition metal dichalcogenide (TMD) Janus monolayers have two different chalcogen surfaces, inherently breaking the out‐of‐plane mirror symmetry. The broken mirror symmetry and the resulting potential gradient lead to the emergence of quantum properties such as the Rashba effect and the formation of dipolar excitons. Experimental access to these quantum properties, however, hinges on the ability to produce high‐quality 2D Janus monolayers. Here, these results introduce a holistic 2D Janus synthesis technique that allows real‐time monitoring of the growth process. This prototype chamber integrates in situ spectroscopy, offering fundamental insights into the structural evolution and growth kinetics, that allow the evaluation and optimization of the quality of Janus monolayers. The versatility of this method is demonstrated by synthesizing and monitoring the conversion of SWSe, SNbSe, and SMoSe Janus monolayers. Deterministic conversion and real‐time data collection further aid in conversion of exfoliated TMDs to Janus monolayers and unparalleled exciton linewidth values are reached, compared to the current best standard. The results offer an insight into the process kinetics and aid in the development of new Janus monolayers with high optical quality, which is much needed to access their exotic properties.

2D materials↗

Development of the NASA/FLAGRO computer program

A preliminary version of a new computer program has been developed for calculating crack propagation in cyclically loaded structures. The new program, titled NASA/FLAGRO, has numerous enhanced features over previous programs used for safe life analysis on space systems. The essential features of the new program consist of modular design, promptive input using a cathode ray tube terminal, improved crack growth rate analytical methods, many new crack case solutions, and incorporation of user-defined files for material properties and fatigue spectrums. Also, five options made available in the program are to compute: (1) safe life of a part with a preexisting crack; (2) critical crack size for a specified stress level; (3) stress-intensity factor numerical values for making comparisons or checks of solutions; (4) least-squares fit of growth rate equations to crack growth rate data; and (5) the conversion of a versus N data to Delta K versus da/dN.

Forman, Royce G.↗

Comparison of U.S. and Russian Slow Crack Growth Data and Models

Both the US and Russian space programs use similar predictive models for design of fused silica windows on the International space station. The Russian model can be derived from the power expression for slow crack growth (SCG) or “static fatigue.” The US uses both power and exponential models. Despite the similarity of models and data fitting approach (linear regression and right censoring), different SCG parameters have been derived by US and Russian parties for the same material (Russian fused silica) tested in a similar manner. The difference appears to be related to the use of short-term strength data along with the longer-term static fatigue data, with the power law parameter n being very sensitive to the conversion of strength data into equivalent static data. This hybrid approach is feasible if strength data is measured with a constant stress rate and is appropriately converted to a static equivalent. More research into the approach is needed. However, because of the nonlinear behavior of fused silica in log(v) – log(K(I) ) space and the sensitivity of parameter estimation to fit range, the exponential model is a better choice regardless of test method. Functions are given to convert parameters from the Russian model to those in the US model. However, accurate conversion is hampered by the lack of inert strength data. When the same test technique is used, US and Russian materials exhibit very similar parameters.

Silica, strength, impact, crack growth, windows, I↗

Enabling High Performance Reconfigurable Ground Data Processing Systems

The deployment of high data rate instruments onboard satellites with direct broadcast capability demands the implementation of powerful ground data processing systems. Conversely, to enable the widespread usage of direct broadcast data and the generation of subsequent data products, low cost data processing systems must be available. Reconfigurable computers based on Field Programmable Gate Arrays (FPGA) enable the implementation of ground data processing systems that lead to higher performance and lower cost while keeping a high degree of programmability and maintainability. This paper presents the conceptualization of the MODIS Adaptive Level One Accelerator (ALOA), a prototype under construction at NASA's Goddard Space Flight Center. The ALOA is a computer workstation augmented by a reconfigurable computer. The system will calibrate and geographically locate data from the EOS-AM1 MODerate resolution Imaging Spectroradiometer (MODIS) instrument at near real-time data rates.

Hines, Tonjua M.↗

Conversion of Site-Specific Meteorological Data for use in CAP-88 PC

CAP-88 PC is a commonly used radiological atmospheric dispersion model. This US EPA-approved model is used to demonstrate compliance with atmospheric emission regulations for radionuclides. While the model includes a large library of meteorological data for use across the United States, there are applications when users may wish to use onsite meteorological data as an input to the CAP-88 PC model. Here, in this work, we present a work-around process for preparing and converting onsite data for use in CAP-88 PC. However, the use of local data should provide a more realistic estimate of doses to members of the public in the immediate vicinity of a facility, although the regulatory agency having jurisdiction may not accept the use of local data for compliance. Additionally, the historical meteorological records from 20+ years ago (at a site many kilometers away) might not be representative of current local weather patterns, highlighting another benefit of using local meteorological data.

54 ENVIRONMENTAL SCIENCES↗