Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “D STATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Transparent conducting oxides: A -doped superlattice approach

Two-dimensional electron gases (2DEGs) at the interface of oxide heterostructures have been the subject of recent experiment and theory, due to the intriguing phenomena that occur in confined electronic states. However, while much has been done to understand the origin of 2DEGs and related phenomena, very little has been explored with regards to the control of conduction pathways and the distribution of charge carriers. Using first principles simulations and experimental thin film synthesis methods, we examine the effect of dimensionality on carrier transport in La delta-doped SrTiO3 (STO) superlattices, as a function of the thickness of the insulating STO spacer. Our computed Fermi surfaces and layer-resolved carrier density proles demonstrate that there is a critical thickness of the STO spacer, below which carrier transport is dominated by three-dimensional conduction of interface charges arising from appreciable overlap of the quantum mechanical wavefunctions between neighboring delta-doped layers. We observe that, experimentally, these superlattices remain highly transparent to visible light. Band structure calculations indicate that this is a result of the appropriately large gap between the O 2p and Ti d states. The tunability of the quantum mechanical wavefunctions and the optical transparency highlight the potential for using oxide heterostructures in novel opto-electronic devices; thus providing a route to the creation of novel transparent conducting oxides.

Cooper, Valentino R↗

Doping effect on photoabsorption and charge-separation dynamics in light-harvesting organic molecule

Using ab-initio theoretical methods, we demonstrate possible enhancement of photo-conversion efficiency of an organic solar cell via intentional doping in molecular graphene-fullerene heterojunction [the hexabenzocoronene (HBC)-triethylene glycol (TEG)–C{sub 60} molecule]. Photoabsorption analysis indicates oxygen substitution into HBC leads to an extension of the spectra up to an infrared regime. A quantum-mechanical molecular dynamics simulation incorporating nonadiabatic electronic transitions reveals that a dissociated charge state (D{sup +} and A{sup -}) in the O-doped system is more stable than the pristine case due to the presence of an effective barrier by the TEG HOMO/LUMO level. We also find that oxygen doping in HBC enhances the intermolecular carrier mobility after charge separation. On the other hand, the pristine molecule undergoes rapid recombination between donor and acceptor charges at the interface. These analyses suggest that the graphene oxidation opens a new window in the application of organic super-molecules to solar cells.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhancing mobility and interface state engineering via UV-ozone treatment in BEOL-compatible ultrathin TiO 2 transistors

It has emerged as a potential candidate to improve the performance of monolithic-three-dimensional (M3D) integration of fused logic and memories through low-temperature in situ synthesis of high-performance metal–oxide–semiconductor (MOS) transistors. Here, we report the demonstration of the BEOL-compatible low thermal budget (350 °C) fabrication process of ultrathin-TiO2 transistors by the combination of RTA and UV-ozone treatment (RTA-UVOz). UV–ozone (UVOz) treatment of TiO2 anatase films significantly enhances stability, boosting ION current and field effect mobility (μ FE ) by two times of magnitude in TiO2 TFTs. UV ozone treatment helps to eliminate pre-existing oxygen vacancies and carbon contamination on TiO2 channels even at low temperature (100 °C), resulting in high-quality channel/dielectric interfaces with low interface states (D it ). During UVOz treatment, oxygen species (O x ) passivate the oxygen vacancies ($V$$^{2+}_{o}$), and hence low concentration of $V$$^{2+}_{o}$ would be left for ionization/de-ionization under PBS/NBS, leading to improved bias stress stability. Furthermore, the TiO 2 TFTs with thin ZrO 2 gate dielectric exhibited excellent performance including a lower subthreshold swing (SS) of 98 mV/dec with high drive I ON current ∼ 4.5 μA/μm, a high I ON /I OFF > 10 9 , and mobility μFE of 7 cm 2 /V-s under a battery powered voltage of 1 V. UV–ozone treatment enables high-performance, CMOS-compatible TiO 2 transistors with a low thermal budget, ideal for next-generation flexible, energy-efficient electronics.

BEOL↗

Structural, magnetic, optical, dielectric and electronic properties of R 2 NiIrO 6 (R = Pr and Nd): A comprehensive experimental and theoretical investigation

Double perovskites are highly promising materials capable of exhibiting a wide variety of phenomena. In this work, we perform a comprehensive experimental and theoretical study of polycrystalline R 2 NiIrO 6 (R = Pr and Nd) compounds. Both compounds were synthesised using the solid-state reaction method. Rietveld refinement confirmed a monoclinic structure with the P2 1 /n space group for both compounds. The scanning electron images showed the average grain sizes of 0.55 μm for R = Pr and 0.46 μm for R = Nd. Fourier transform infrared ra- diation spectra of the two compounds presented two intense bands at 470 cm -1 and 540 cm -1 . The optical measurements revealed that the band gaps of the compounds were in the visible absorption range. The field- cooled magnetisation - field hysteresis measurements indicated exchange bias properties in the synthesised compounds at low temperatures. Both temperature and frequency variation of dielectric constant and loss tangent measurements were conducted. The frequency-dependent ac conductivity measurements indicated that the conductivity increases with the increase of frequency as well as temperature. The Nd 2 NiIrO 6 compound showed lower ac conductivities compared to its isostructural Pr 2 NiIrO 6 compound. The atomic and electronic structures of Nd 2 NiIrO 6 and Pr 2 NiIrO 6 were explored using the spin-polarised calculations performed within the DFT+U method. Our results suggested that the inclusion of on-site correlations and repulsions for the d-states of atoms was necessary in order to obtain finite band gaps of Nd 2 NiIrO 6 and Pr 2 NiIrO 6 systems.

36 MATERIALS SCIENCE↗

Dielectron widths of the S-, D-vector bottomonium states

The dielectron widths of {Upsilon}(nS)(n = 1, ..., 7) and vector decay constants are calculated using the relativistic string Hamiltonian with a universal interaction. For {Upsilon}(nS) (n = 1, 2, 3) the dielectron widths and their ratios are obtained in full agreement with the latest CLEO data. For {Upsilon}(10580) and {Upsilon}(11020) a good agreement with experiment is reached only if the 4S-3D mixing (with a mixing angle {theta} = 27{sup o{+-}} 4{sup o}) and 6S-5D mixing (with {theta} = 40{sup o{+-}}5{sup o}) are taken into account. The possibility to observe higher 'mixed D-wave' resonances, tilde {Upsilon} (n{sup 3}D{sub 1}) with n = 3, 4, 5 is discussed. In particular, tilde {Upsilon} ({approx}11120), originating from the pure 5{sup 3}D{sub 1} state, can acquire a rather large dielectron width, {approx}130 eV, so that this resonance may become manifest in the e{sup +}e{sup -} experiments. On the contrary, the widths of pure D-wave states are very small, {Gamma}{sub ee}(n{sup 3}D{sub 1}){<=} 2 eV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurements of O(1 D) quenching rates in the F-region

In-situ determinations of the quenching of O(1 D) atoms by N2 and O2 molecules were made from observations of 6300 A nightglow intensity enhancements produced by the Platteville 1.6 MW transmitter. The heating of F-region electrons near the point of reflection of the RF wave leads to electron impact excitation of oxygen atoms to the O(1 D) state. It is shown that the resulting region of enhance 6300 A emission is localized to the region of electron energy absorption for heating at the lower altitudes. At 225 km the measured time constants for intensity buildup following transmitter turn-on and for intensity decay following turn-off are identical and equal to (13 plus or minus 1) sec. Time constants varying from 30 to 80 sec are found for the altitude range 260 to 300 km. The inferred quenching coefficient for the whole altitude range, 225 to 300 km, is 4.4 + 2 or - 1 x 10 to the minus 11th power cu cm/sec at 950 K, in good agreement with laboratory data. The quenching frequency obtained at 225 km, when referred to the altitude 120 km, is equal to (21 plus or minus 2)/sec, in agreement with less direct ionospheric determinations.

Sipler, D. P.↗

Programmable Phase Selection between Altermagnetic and Noncentrosymmetric Polymorphs of MnTe on InP via Molecular Beam Epitaxy

This dataset contains DFT input and output files supporting the theoretical modeling in the associated publication (ACS Appl. Mater. Interfaces 2026, 18, 15654-15664). The calculations model the interfacial energetics of two MnTe polymorphs — NiAs-MnTe (hexagonal, alpha phase) and ZnS-MnTe (cubic, gamma phase) — on InP(111) substrates with two surface terminations: In-terminated InP(111)A and P-terminated InP(111)B. This gives four interface configurations: NiAs on In-terminated (experimentally observed), NiAs on P-terminated (computed for comparison), ZnS on In-terminated (computed for comparison), and ZnS on P-terminated (experimentally observed). The dataset is organized into four calculation types, each covering all four polymorph/termination combinations: (i) Slabs: Pristine MnTe/InP heterostructure slabs used to compute total energies and interface energy densities (Eint) for all four configurations, as reported in Fig. 6 of the main text. (ii) Disorder: Same slab geometries with a P_Te + Te_P antisite defect pair introduced near the interface, used to assess chemical intermixing effects on interface stability (Fig. S8, SI). (iii) Strain: Pristine slab calculations with in-plane lattice parameters strained by -1% and +1% relative to the InP lattice constant, used to evaluate strain-dependent interface energetics (Fig. S9, SI). (iv) Charge_Density: Single-point calculations on the full heterostructure, the isolated InP slab, and the isolated MnTe slab at fixed geometry, used to compute differential charge density plots showing interfacial charge accumulation and depletion as a function of surface termination (Fig. S10, SI). Each calculation folder contains INCAR, KPOINTS, POSCAR, CONTCAR, OUTCAR, and POTCAR_info.txt (PAW potential information, excluding the full POTCAR due to VASP licensing restrictions). The calculations were performed using VASP 6.4.3 with PBE exchange-correlation, PAW potentials, a Hubbard correction of Ueff = 5 eV on Mn d-states, and A-type AFM spin initialization.

36 MATERIALS SCIENCE↗

Transition‐Metal Nitride Core@Noble‐Metal Shell Nanoparticles as Highly CO Tolerant Catalysts

Abstract Core–shell architectures offer an effective way to tune and enhance the properties of noble‐metal catalysts. Herein, we demonstrate the synthesis of Pt shell on titanium tungsten nitride core nanoparticles (Pt/TiWN) by high temperature ammonia nitridation of a parent core–shell carbide material (Pt/TiWC). X‐ray photoelectron spectroscopy revealed significant core‐level shifts for Pt shells supported on TiWN cores, corresponding to increased stabilization of the Pt valence d‐states. The modulation of the electronic structure of the Pt shell by the nitride core translated into enhanced CO tolerance during hydrogen electrooxidation in the presence of CO. The ability to control shell coverage and vary the heterometallic composition of the shell and nitride core opens up attractive opportunities to synthesize a broad range of new materials with tunable catalytic properties.

Garg, Aaron↗

Selective C−H Bond Cleavage in Methane by Small Gold Clusters

Abstract Methane represents the major constituent of natural gas. It is primarily used only as a source of energy by means of combustion, but could also serve as an abundant hydrocarbon feedstock for high quality chemicals. One of the major challenges in catalysis research nowadays is therefore the development of materials that selectively cleave one of the four C−H bonds of methane and thus make it amenable for further chemical conversion into valuable compounds. By employing infrared spectroscopy and first‐principles calculations it is uncovered herein that the interaction of methane with small gold cluster cations leads to selective C−H bond dissociation and the formation of hydrido methyl complexes, H‐Au x + ‐CH 3 . The distinctive selectivity offered by these gold clusters originates from a fine interplay between the closed‐shell nature of the d states and relativistic effects in gold. Such fine balance in fundamental interactions could prove to be a tunable feature in the rational design of a catalyst.

Lang, Sandra M.↗

A Physical Model for Understanding the Activation of MoS 2 Basal‐Plane Sulfur Atoms for the Hydrogen Evolution Reaction

Abstract Weak binding of hydrogen atoms to the 2H‐MoS 2 basal plane renders MoS 2 inert as an electrocatalyst for the hydrogen evolution reaction. Transition‐metal doping can activate neighboring sulfur atoms in the MoS 2 basal plane to bind hydrogen more strongly. Our theoretical studies show strong variation in the degree of activation by dopants across the 3d transition‐metal series. To understand the trends in activation, we propose a model based on the electronic promotion energy required to partially open the full valence shell of a local S atom and therefore enable it to bond with a H atom. In general, the promotion is achieved through an electron transfer from the S to neighboring metal‐atom sites. Furthermore, we demonstrate a specific, electronic‐structure‐based descriptor for the hydrogen‐binding strength: Δ dp , the local interband energy separation between the lowest empty d‐states on the dopant metal atoms and occupied p‐states on S. This model can be used to provide guidelines for chalcogen activation in future catalyst design based on doped transition‐metal dichalcogenides.

Liu, Mingjie↗

A Physical Model for Understanding the Activation of MoS 2 Basal‐Plane Sulfur Atoms for the Hydrogen Evolution Reaction

Abstract Weak binding of hydrogen atoms to the 2H‐MoS 2 basal plane renders MoS 2 inert as an electrocatalyst for the hydrogen evolution reaction. Transition‐metal doping can activate neighboring sulfur atoms in the MoS 2 basal plane to bind hydrogen more strongly. Our theoretical studies show strong variation in the degree of activation by dopants across the 3d transition‐metal series. To understand the trends in activation, we propose a model based on the electronic promotion energy required to partially open the full valence shell of a local S atom and therefore enable it to bond with a H atom. In general, the promotion is achieved through an electron transfer from the S to neighboring metal‐atom sites. Furthermore, we demonstrate a specific, electronic‐structure‐based descriptor for the hydrogen‐binding strength: Δ dp , the local interband energy separation between the lowest empty d‐states on the dopant metal atoms and occupied p‐states on S. This model can be used to provide guidelines for chalcogen activation in future catalyst design based on doped transition‐metal dichalcogenides.

Liu, Mingjie↗

Electroweak splitting functions and high energy showering

We derive the electroweak (EW) collinear splitting functions for the Standard Model, including the massive fermions, gauge bosons and the Higgs boson. We first present the splitting functions in the limit of unbroken SU(2) L × U(1) Y and discuss their general features in the collinear and soft-collinear regimes. These are the leading contributions at a splitting scale ( k T ) far above the EW scale (v). We then systematically incorporate EW symmetry breaking (EWSB), which leads to the emergence of additional “ultra-collinear” splitting phenomena and naive violations of the Goldstone-boson Equivalence Theorem. We suggest a particularly convenient choice of non-covariant gauge (dubbed “Goldstone Equivalence Gauge”) that disentangles the effects of Goldstone bosons and gauge fields in the presence of EWSB, and allows trivial book-keeping of leading power corrections in v/ k T . We implement a comprehensive, practical EW showering scheme based on these splitting functions using a Sudakov evolution formalism. Novel features in the implementation include a complete accounting of ultra-collinear effects, matching between shower and decay, kinematic back-reaction corrections in multi-stage showers, and mixed-state evolution of neutral bosons ( γ/Z/h ) using density-matrices. We employ the EW showering formalism to study a number of important physical processes at O (1-10 TeV) energies. They include (a) electroweak partons in the initial state as the basis for vector-boson-fusion; (b) the emergence of “weak jets” such as those initiated by transverse gauge bosons, with individual splitting probabilities as large as O (35%); (c) EW showers initiated by top quarks, including Higgs bosons in the final state; (d) the occurrence of O (1) interference effects within EW showers involving the neutral bosons; and (e) EW corrections to new physics processes, as illustrated by production of a heavy vector boson ( W ') and the subsequent showering of its decay products.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Ab initio study of He point defects in fcc Au-Ag alloys

The relative stabilities of He defects in two fcc Au-Ag alloys (Au3Ag2 and AuAg) are investigated using ab initio method based on density functional theory. The results show that the stabilities of He defects in the two alloys mainly depend on the atomic arrangements of the nearest neighboring host metals. A He interstitial prefers to stay at a site with more Ag neighboring atoms, while the favorable substitutional site has more Au neighboring atoms in Au-Ag alloys. Moreover, the substitutional He defects are the most stable configurations in both the alloys, and the octahedral He interstitials are energetically more favorable than the tetrahedral interstitials. It is of interest to note that the properties of He defects slightly depend on the mass-density of Au-Ag alloys. The results also demonstrate that the relative stabilities of He defects are primarily attributed to the hybridization between metals d states and He p states.

Ab initio calculation↗

Effect of epitaxial strain on the optical properties of NaOsO 3

We study the electronic and optical properties of NaOsO 3 under epitaxial strain using first principles methods. Structural optimization shows important changes with strain in the structural parameters such as the Os O bond lengths and the octahedral rotation angles. The key change in the electronic structure is the band gap, which increases with compressive epitaxial strain and decreases with tensile strain. The computed optical absorption coefficient is more or less isotropic for the unstrained structure for light polarization along the three crystallographic directions, but for the strained structure, it is enhanced if the light polarization is along a compressed crystallographic direction due to strain. This is explained in terms of the admixture of Os ( p ) orbitals with the Os ( d ) states that form the valence and the conduction bands.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

La 3 CuTe 5 : A Narrow-Gap Semiconductor with Indirect Gap and Dual-Regime Thermally Activated Transport

Metal-chalcogenide systems remain a long-standing research topic because of their structural diversity and potential to host emergent phenomena. Here, we report a new compound, La 3 CuTe 5 , synthesized from the halide-flux method. Single-crystal X-ray diffraction studies indicate the structure to be unique among reported ones. Here, the compound crystallizes in a novel structure type adopting the orthorhombic space group Pnma and a unit cell of a = 24.3947(14) Å, b = 4.4232(2) Å, and c = 10.2142(5) Å. The tetrahedral [CuTe 4 ] building blocks form chains along [010] by corner sharing and link [LaTe 7 ] and [LaTe 8 ] polyhedra via edge sharing, resulting in a three-dimensional bulk structure. Thermal analysis results indicate that the material remains stable with a temperature up to 950 °C and decomposable at 1400 °C. First-principles calculations reveal an indirect electronic band gap and flat valence bands dominated by Te p and Cu d states. Optical absorption measurements yield a band gap of ∼0.65 eV, consistent with semiconducting behavior observed in transport measurements. Fittings to the temperature-dependent resistivity reveal two thermally activated regimes associated with Arrhenius-type conduction and three-dimensional variable range hopping, respectively.

Chalcogenides↗

Norm-conserving pseudopotentials and basis sets to explore Lanthanide chemistry in complex environments

A complete set of pseudopotentials and accompanying basis sets for all lanthanide elements are presented based on the relativistic, norm-conserving, separable, dual-space Gaussian-type pseudopotential protocol of Goedecker, Teter and Hutter (GTH) within the generalized gradient approximation (GGA) and the exchange-correlation functional of Perdew, Burke and Ernzerhof (PBE). The corresponding basis sets have been molecularly optimized (MOLOPT) using a contracted form with a single set of Gaussian exponents for s, p and d states. The f states are uncontracted explicitly with Gaussian exponents. Moreover, the Hubbard U values for each lanthanide element, to be used in DFT+U calculations, are also tabulated, allowing for the proper treatment of the strong on-site Coulomb interactions of localized 4f electrons. The accuracy and reliability of our GTH pseudopotentials and companion basis sets optimized for lanthanides is illustrated by a series of test calculations on lanthanide-centered molecules, and solid-state systems, with the most common oxidation states. We anticipate that these pseudopotentials and basis sets will enable larger-scale density functional theory calculations and ab initio molecular dynamics simulations of lanthanide molecules in either gas or condensed phases, as well as of solid state lanthanide-containing materials, allowing to further explore the chemical and physical properties of lanthanide systems.

Lu, Jun-Bo↗