Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Crystal Characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Anisotropic magnetism of the Shastry-Sutherland lattice material BaNd 2 PtO 5

For this work, single crystals were grown and characterized to investigate the physical properties and magnetic ground state of BaNd 2 PtO 5 , a candidate to host physics of the Shastry-Sutherland model. Analysis of single crystal x-ray diffraction data yields an updated crystal structure, similar to the prior report but now in space group P4/mbm. Magnetization and specific heat measurements reveal an antiferromagnetic transition at T N =1.9K and a large magnetic anisotropy with in-plane magnetization much larger than out-of-plane magnetization. Single crystal neutron diffraction at zero field reveals a propagation vector of ($\frac{1}{2}$$\frac{1}{2}$$\frac{1}{2}$) for the magnetic ground state as compared to the ($\frac{1}{2}$$\frac{1}{2}$0) wave vector observed in the related body-centered material BaNd 2 ZnO 5 . The ground state is found to be a fully compensated antiferromagnet with diffraction data well fitted within the magnetic space group P S –1 (BNS setting #2.7). The ordered moment is mostly in the basal plane with nearest neighbors forming ferromagnetic dimers, however it also has a finite out-of-plane component unlike the related easy-plane materials BaNd 2 ZnO 5 and BaNd 2 ZnS 5 . Field-induced transitions are observed below T N when the field is applied within the basal plane, and in-plane anisotropy of the associated critical fields is observed. The magnetization is strongly impacted by misalignment of the field away from high symmetry directions. These results suggest complex magnetic structures may arise in the field-induced states, and they highlight the need for extreme care when studying this and related Shastry-Sutherland materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Surface oxidation and crystallization of FeNi-Based soft magnetic nanocrystalline and amorphous nanocomposite alloys

In this work, we present characterization of surface oxidation and crystallization behavior of Metal Amorphous Nanocomposite (MANC) (Fe 70 Ni 30 ) 80 Nb 4 Si 2 B 14 alloys via complementary x-ray diffraction, electron microscopy, and x-ray photoelectron spectroscopy techniques. An adherent amorphous oxide of roughly 15–20 nm in thickness is observed on the wheel side of the ribbon, enriched in Fe relative to Ni and with significant content of Si and Nb as would be expected based upon a comparison of the Gibbs free energy of formation of the stable oxide phases. The amorphous character of the oxide is likely to result from the significant Si-content coupled with the amorphous and nanocrystalline character of the underlying metallic layer. Higher density of FeNi-enriched nanocrystals is also observed within ~100 nm of the wheel-side surface, presumably due to reduction in local glass former concentration. A rough, crystalline copper oxide layer is also present and forms through contact between the copper wheel and the solidifying melt during the rapid solidification process. On the air side of the ribbon, a crystalline oxide layer of ~15–20 nm is formed as well as intergranular oxidation that penetrates along the grain boundaries between highly textured surface crystallites of ~50–100 nm in size. The crystalline nature of the oxide on these surfaces is asserted to result from the lack of significant Si-content and the pre-existing surface crystallites that form during the rapid solidification process which promote a crystalline oxide surface layer. Furthermore, these results shed new insights into the details of surface oxidation and can help to inform processing and alloy composition adjustments which seek to tailor surface properties.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ferromagnetic cluster-glass phase in Ca(Co 1-x Ir x ) 2-y As 2 crystals

In this study, single crystals of Ca(Co 1-x Ir x ) 2-y As 2 with 0≤x≤0.35 and 0.10≤y≤0.14 have been grown using the self-flux technique and characterized by single-crystal x-ray diffraction (XRD), energy-dispersive x-ray spectroscopy, magnetization M, and magnetic susceptibility χ measurements versus temperature T, magnetic field H, and time t, and heat-capacity C p (H,T) measurements. The XRD refinements reveal that all the Ir-substituted crystals crystallize in a collapsed-tetragonal structure as does the parent CaCo 2-y As 2 compound. A small 3.3% Ir substitution for Co in CaCo 1.86 As 2 drastically lowers the A-type antiferromagnetic (AFM) transition temperature T N from 52 to 23 K with a significant enhancement of the Sommerfeld electronic heat-capacity coefficient. The A-type AFM structure consists of ab-plane layers of spins ferromagnetically aligned along the c axis with AFM alignment of the spins in adjacent layers along this axis. The positive Weiss temperatures obtained from Curie-Weiss fits to the χ(T>T N ) data indicate that the dominant magnetic interactions are ferromagnetic (FM) for all x. A magnetic phase boundary is inferred to be present between x=0.14 and x=0.17 from a discontinuity in the x dependencies of the effective moment and Weiss temperature in the Curie-Weiss fits. FM fluctuations that strongly increase with increasing x are also revealed from the χ(T) data. Furthermore, the magnetic ground state for x≥0.17 is a spin glass as indicated by hysteresis in χ(T) between field-cooled and zero-field-cooled measurements and from the relaxation of M in a small field that exhibits a stretched-exponential time dependence. The spin glass has a small FM component to the ordering and is hence inferred to be comprised of small FM clusters. The competing AFM and FM interactions along with crystallographic disorder associated with Ir substitution are inferred to be responsible for the development of a FM cluster-glass phase. A logarithmic T dependence of Cp at low T for x=0.14 is consistent with the presence of significant FM quantum fluctuations. This composition is near the T=0 boundary at x≈0.16 between the A-type AFM phase containing ferromagnetically-aligned layers of spins and the FM cluster-glass phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Learning to Predict Crystal Plasticity at the Nanoscale: Deep Residual Networks and Size Effects in Uniaxial Compression Discrete Dislocation Simulations

The density and configurational changes of crystal dislocations during plastic deformation influence the mechanical properties of materials. These influences have become clearest in nanoscale experiments, in terms of strength, hardness and work hardening size effects in small volumes. The mechanical characterization of a model crystal may be cast as an inverse problem of deducing the defect population characteristics (density, correlations) in small volumes from the mechanical behavior. In this work, we demonstrate how a deep residual network can be used to deduce the dislocation characteristics of a sample of interest using only its surface strain profiles at small deformations, and then statistically predict the mechanical response of size-affected samples at larger deformations. As a testbed of our approach, we utilize high-throughput discrete dislocation simulations for systems of widths that range from nano- to micro- meters. We show that the proposed deep learning model significantly outperforms a traditional machine learning model, as well as accurately produces statistical predictions of the size effects in samples of various widths. By visualizing the filters in convolutional layers and saliency maps, we find that the proposed model is able to learn the significant features of sample strain profiles.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Syntheses and Characterization of Tetrazolate-Based Lanthanide Compounds and Selective Crystallization Separation of Neodymium and Dysprosium

Selective crystallization offers new opportunities for separating neodymium and dysprosium, which are considerably important in permanent magnets. Two water-soluble nitrogen-rich tetrazolate-based ligands, dtp 2– (H 2 dtp = 2,3-di-1H-tetrazol-5-ylpyrazine) and H 2 ibt – [H 3 ibt = 4,5-bis(tetrazol-5-yl)imidazole], allow the separation of Nd 3+ and Dy 3+ through selective crystallization. The reactions of Ln 3+ with the ligand Na 2 (dtp)·2H 2 O lead to two distinct phases, Na[Ln(dtp)(H 2 O) 8 ](dtp)·H 2 O (Lndtp1; Ln = La–Pr) and [Ln(H 2 O) 8 ](Hdtp)(dtp)·H 2 O (Lndtp2; Ln = Nd and Sm–Lu). Three different compound types, [Ln(H 2 ibt) 2 (H 2 O) 6 ](H 2 ibt)·3(H 2 O) (Lnibt1; Ln = La or Ce), [Ln(H 2 ibt)(H 2 O) 7 ](H 2 ibt) 2 ·4(H 2 O) (Lnibt2; Ln = Pr or Nd), and [Ln(Hibt)(H 2 ibt)(H 2 O) 4 ]·4+x(H 2 O) (Lnibt3; Ln = Sm–Lu), are obtained from reacting Ln 3+ and Na(H 2 ibt)·3(H 2 O). Two different phases are observed for Nd(Lnibt2) and Dy(Lnibt3) in the system of H 2 ibt – , which leads to crystallization-based separation of Nd/Dy with a separation factor of 32 ± 0.7, 10 times higher than that of dtp 2– , and a short separation time of 20 s (1 day for dtp 2– ). As a result, the higher performance of H 2 ibt – compared to that of dtp2– provides guidance for the rational design of water-soluble tetrazolate-derived ligands for selective crystallization.

Crystal structure↗
DOE OSTI2023

Rare Earth Nitrate Hybrid Double Perovskites [Me 4 N] 2 [MLn(NO 3 ) 6 ] (M = Na–Cs; Ln = La–Gd, ex. Pm)

An exploration of the synthetic and structural phase space of rare earth hybrid double perovskites A 2 B'BX 6 (A = organocation, B' = M + , B = M 3+ , X = molecular bridging anion) that include X = NO 3 – and B' = alkali metal is reported, complementing earlier studies of the [Me 4 N] 2 [KB(NO 3 ) 6 ] (B = Am, Cm, La–Nd, Sm–Lu, Y) (Me 4 N = (CH 3 ) 4 N + ) compounds. In the present efforts, the synthetic phase space of these systems is explored by varying the identity of the alkali metal ion at the B'-site. Herein, we report three new series of the form [Me 4 N] 2 [B'B(NO 3 ) 6 ] (B = La–Nd, Sm–Gd; B' = Na, Rb, Cs). The early members of the Na-series crystallize in the trigonal space group R3̅ from La to Nd where a phase transition occurs in the phase between 273 and 300 K, going from R3̅ to the high-symmetry, cubic space group Fm3̅m. The preceding trigonal members of the Na-series also undergo phase transitions to cubic symmetry at temperatures above 300 K, establishing a decreasing trend in the phase-transition temperature. The remainder of the Na-series, as well as the Rb- and Cs-series, all crystallize in Fm3̅m at 300 K. The temperature-dependent phase behavior of the synthesized phases is studied via variable-temperature spectroscopic methods and high-resolution powder X-ray diffractometry. All phases were characterized via single-crystal and powder X-ray diffraction and Fourier transform infrared (FT-IR) and Raman spectroscopic methods. These results demonstrate the versatility of the perovskite structure type to include rare earth ions, nitrate ions, and a suite of alkali metal ions and serve as a foundation for the design of functional rare earth hybrid double perovskite materials such as those possessing useful multiferroic, optical, and magnetic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Spectroscopic characterization of electronic structures of ultra-thin single crystal La0.7Sr0.3MnO3

Abstract We have successfully fabricated high quality single crystalline La 0.7 Sr 0.3 MnO 3 (LSMO) film in the freestanding form that can be transferred onto silicon wafer and copper mesh support. Using soft x-ray absorption (XAS) and resonant inelastic x-ray scattering (RIXS) spectroscopy in transmission and reflection geometries, we demonstrate that the x-ray emission from Mn 3 s -2 p core-to-core transition (3 s PFY) seen in the RIXS maps can represent the bulk-like absorption signal with minimal self-absorption effect around the Mn L 3 -edge. Similar measurements were also performed on a reference LSMO film grown on the SrTiO 3 substrate and the agreement between measurements substantiates the claim that the bulk electronic structures can be preserved even after the freestanding treatment process. The 3 s PFY spectrum obtained from analyzing the RIXS maps offers a powerful way to probe the bulk electronic structures in thin films and heterostructures when recording the XAS spectra in the transmission mode is not available.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Nucleation kinetics model for primary crystallization in Al–Y–Fe metallic glass

The high density of aluminum nanocrystals (>10 21 m -3 ) that develop during the primary crystallization in Al-based metallic glasses indicates a high nucleation rate (~10 18 m -3 s -1 ). Several studies have been advanced to account for the primary crystallization behavior, but none have been developed to completely describe the reaction kinetics. Recently, structural analysis by fluctuation electron microscopy has demonstrated the presence of the Al-like medium range order (MRO) regions as a spatial heterogeneity in as-spun Al 88 Y 7 Fe 5 metallic glass that is representative for the class of Al-based amorphous alloys that develop Al nanocrystals during primary crystallization. From the structural characterization, an MRO seeded nucleation configuration is established, whereby the Al nanocrystals are catalyzed by the MRO core to decrease the nucleation barrier. The MRO seeded nucleation model and the kinetic data from the delay time (τ) measurement provide a full accounting of the evolution of the Al nanocrystal density (N v ) during the primary crystallization under isothermal annealing treatments. Moreover, the calculated values of the steady state nucleation rates (J ss ) predicted by the nucleation model agree with the experimental results. Moreover, the model satisfies constraints on the structural, thermodynamic, and kinetic parameters, such as the critical nucleus size, the interface energy, and the volume-free energy driving force that are essential for a fully self-consistent nucleation kinetics analysis. In conclusion, the nucleation kinetics model can be applied more broadly to materials that are characterized by the presence of spatial heterogeneities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Onion-Like nanoparticles of the metal–organic framework UiO-66 synthesized by sequential spike crystal growth

Reproducible size and morphology of metal–organic framework (MOF) particles are essential for tuning these materials for applications like heterogeneous catalysis. Particle size measurements from electron micrographs provide information about the impact of changing synthetic parameters on MOF growth, but reported data are usually limited to averages and statistical distributions. Further elucidating synthetic control parameters could facilitate studies of facet-dependent and non-classical growth mechanisms. Here, in this work, phase-pure nanoparticles of the MOF UiO-66 were synthesized using alternating spikes of zirconium and hafnium-based nodes, forming an onion-like structure with alternating layers of Zr-UiO-66 and Hf-UiO-66. In conventional, bright-field transmission electron micrographs, Hf-UiO-66 and Zr-UiO-66 layers appeared darker and lighter, respectively. Alternating layers of Hf-UiO-66 and Zr-UiO-66 were also apparent in elemental maps obtained using scanning transmission electron microscopy with energy-dispersive X-ray spectroscopy. Average particle sizes increased monotonically with each spike, and no Zr-only or Hf-only particles were observed after the first spike, indicating that new material was consistently incorporated onto existing seeds. Surface area of the onion-like particles and their uptake of Ni 2+ from solution were both between the values measured for Zr-UiO-66 and Hf-UiO-66. Results demonstrate the use of sequential spikes of nodes in monitoring crystal growth in MOFs.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Focused‐beam X‐ray fluorescence and diffraction microtomographies for mineralogical and chemical characterization of unsectioned extraterrestrial samples

Abstract This study describes the application of new synchrotron X‐ray fluorescence (XRF) and diffraction (XRD) microtomographies for the 3‐D visualization of chemical and mineralogical variations in unsectioned extraterrestrial samples. These improved methods have been applied to three compositionally diverse chondritic meteorite samples that were between 300 and 400 μm in diameter, including samples prepared from fragments of the CR2 chondrite LaPaz Icefield (LAP) 02342, H5 chondrite MacAlpine Hills (MAC) 88203, and the CM2 chondrite Murchison. The synchrotron‐based XRF and XRD tomographies used are focused‐beam techniques that measure the intensities of fluorescent and diffracted X‐rays in a sample simultaneously during irradiation by a high‐energy microfocused incident X‐ray beam. Measured sinograms of the emitted and diffracted intensities were then tomographically reconstructed to generate 2‐D slices of XRF and XRD intensity through the sample, with reconstructed pixel resolution of 1–2 μm, defined by the resolution of the focused incident X‐ray beam. For sample LAP 02342, primary mineral phases that were visualized in reconstructed slices using these techniques included isolated grains of α‐Fe, orthopyroxene, and olivine. For our sample of MAC 88203, XRF/XRD tomography allowed visualization of forsteritic olivine as a primary mineral phase, a vitrified fusion crust at the sample surface, identification of localized Cr‐rich spinels at spatial resolutions of several micrometers, and imaging of a plagioclase‐rich glassy matrix. In the sample of Murchison, major identifiable phases include clinoenstatite‐ and olivine‐rich chondrules, variable serpentine matrix minerals and small Cr‐rich spinels. Most notable in the tomographic analysis of Murchison is the ability to quantitatively distinguish and visualize the complex mixture of serpentine‐group minerals and associated tochilinite–cronstedtite intergrowths. These methods provide new opportunities for spatially resolved characterization of sample texture, mineralogy, crystal structure, and chemical state in unsectioned samples. This provides researchers an ability to characterize such samples internally with minimal disruption of sample micro‐structures and chemistry, possibly without the need for sample extraction from some types of sampling and capture media.

Geochemistry & Geophysics↗
DOE OSTI2022

Electron beam heating as a tool for fabricating lattice engineered crystals in glass [Invited]

Laser heating is well-established to impart optical functionality into glass by local modification and crystallization. In this paper, we demonstrate electron beam heating in scanning and transmission microscopes as an alternative for the local crystallization of Sb 2 S 3 in Sb-S-I glasses as a model system. Governed by different absorption physics, the electron beam expands morphological control of crystal cross section relative to laser, producing nanoscale (∼50 nm) single crystal architectures. We also report the effects of accelerating voltage and probe current and characterize the curved lattice of crystals formed in glass with electron diffraction techniques.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The mechanism driving a solid–solid phase transition in a biomacromolecular crystal

A solid-solid phase transition (SSPT) occurs between distinguishable crystalline forms. Because of its importance in application and theory in material science and condensed matter physics, SSPT has been studied most extensively in metallic alloys, inorganic salt or small organic molecular crystals, but much less so in biomacromolecular crystals. In general, the mechanism of SSPT at atomic and molecular levels is not well understood. Here, we describe the ordered molecular rearrangements in biomacromolecular crystals of the adenine riboswitch (riboA) aptamer using real-time serial crystallography and solution atomic force microscopy (AFM). The large, ligand-induced conformational changes drive the initial phase transition from the apo unit cell (AUC) to the trans unit cell 1 (TUC1). During this transition, coaxial stacking of P1 duplexes becomes the dominant packing interface, whereas P2-P2 interactions are almost completely disrupted, resulting in “floating” layers of molecules. The coupling points in TUC1 and their local conformational flexibility allow the molecules to reorganize to achieve the more densely packed and energetically favorable bound unit cell (BUC). Our study thus reveals the interplay between the conformational changes and the crystal phases—the underlying mechanism that drives the phase transition. Using polarized video microscopy (PVM) to monitor the SSPT in small crystals at high ligand concentration, we have identified the time window during which the major conformational changes take place, and simulated the in crystallo kinetics. Together, these results provide the spatiotemporal information necessary for informing time-resolved crystallography (TRX) experiments. Moreover, this study illustrates a practical approach to characterize SSPT in transparent crystals.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Self-selecting vapor growth of transition-metal-halide single crystals

Transition-metal halides can host a large variety of novel phenomena, such as magnetism in the monolayer limit, quantum spin liquid and spiral spin liquid states, topological magnons, and chiral phonons. Sizable high-quality single crystals are necessary for investigations of magnetic and lattice excitations by, for example, inelastic neutron scattering. In this paper, we review a less well-known vapor transport technique, self-selecting vapor growth, and report our growths of transition-metal halides using this technique. We report the growth and characterizations of sizable single crystals of α–RuCl 3 , CrCl 3 , Ru 1–x Cr x Cl 3 , and CrBr 3 . In order to expedite the conversion of starting powder to single crystals, we modified the technique by cooling the growth ampoule through an appropriate temperature range. Our work shows that the self-selecting vapor transport technique can provide large single crystals of transition-metal halides, demonstrating its potential for providing high-quality single crystals of quantum materials.

2-dimensional systems↗
DOE OSTI2026

Pressure-Induced Stabilization of Terbium(IV) in CsTb(CrO 4 ) 2 Characterized by X-ray Absorption Spectroscopy

Single crystals of CsTb(CrO 4 ) 2 and CsDy(CrO 4 ) 2 , where the lanthanide metals are in the trivalent state under ambient conditions, have been investigated under high-pressure conditions on the gigapascal scale utilizing a diamond anvil cell. These compounds were characterized by single-crystal X-ray diffraction in addition to high-pressure solid-state UV-vis-NIR spectroscopy, Raman spectroscopy, and Tb L 3 -edge highenergy- resolution fluorescence-detected X-ray absorption near-edge structure (HERFD-XANES). The high-pressure UV-vis-NIR spectra reveal strong broadening of the metal-to-ligand charge transfer band to lower energies, associated with a visible color change from yellow to dark red/black. Clear evidence for the stabilization of Tb 4+ under high pressure is provided by the appearance of a second edge feature characteristic of Tb 4+ , starting at 19.62 GPa in the high-pressure L 3 -edge HERFD-XANES at around 7528 eV. This represents the first example of Tb 4+ being stabilized by high pressure and expands upon the limited chemistry of terbium in the tetravalent state.

Anions↗
DOE OSTI2022

Synthesis of an Isostructural Series of 12-Coordinate Lanthanide Nitrate Hybrid Double Perovskites with Cubic Symmetry

In efforts to study the periodic chemical properties of the rare earth elements and their structural chemistry, a hybrid double perovskite phase A 2 B'BX 6 with the formula ((CH 3 ) 4 N) 2 KLn(NO 3 ) 6 (Ln = La–Lu, Y ex. Pm) was synthesized that crystallizes in the cubic space group, $Fm$$\bar{3}$$m$. This series was obtained via evaporative crystallization from a mixture of Ln(NO 3 ) 3 , KNO 3 , and (CH 3 ) 4 N·NO 3 in a 1:1:2 ratio from either H 2 O or 4.0 M HNO 3 . In this double perovskite structure, the B site containing the lanthanide ion is coordinated by six bidentate nitrate ligands, with the distal N$=$O oxygen atoms coordinating the potassium on the B' site in an octahedral six-coordinate environment. The two-remaining charge-compensating (CH 3 ) 4 N + cations occupy the interstitial voids in the lattice on the A site. This periodic series was characterized via single-crystal X-ray diffraction, powder X-ray diffraction, IR, and Raman spectroscopy. Emission spectra of the Eu complex indicate a phase transition to trigonal symmetry upon cooling. In conclusion, this series is unique as it represents a rare isostructural series spanning the entirety of the rare earth elements excluding promethium with homoleptic 12-coordinate rare earth metal ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Magnetic properties of the Ising-like rare earth pyrosilicate: D-Er 2 Si 2 O 7

Ising-like spin-1/2 magnetic materials are of interest for their ready connection to theory, particularly in the context of quantum critical behavior. In this work we report detailed studies of the magnetic properties of a member of the rare earth pyrosilicate family, D-Er 2 Si 2 O 7 , which is known to display a highly anisotropic Ising-like g-tensor and effective spin-1/2 magnetic moments. We used powder neutron diffraction, powder inelastic neutron spectroscopy (INS), and single crystal AC susceptibility to characterize its magnetic properties. Neutron diffraction enabled us to determine the magnetic structure below the known transition temperature (T N = 1.9 K) in zero field, confirming that the magnetic state is a four-sublattice antiferromagnetic structure with two non-collinear Ising axes, as was previously hypothesized. Our powder INS data revealed a gapped excitation at zero field, consistent with anisotropic (possibly Ising) exchange. An applied field of 1 T produces a mode softening, which is consistent with a field-induced second order phase transition. To assess the relevance of D-Er 2 Si 2 O 7 to the transverse field Ising model, we performed AC susceptibility measurements on a single crystal with the magnetic field oriented in the direction transverse to the Ising axes. This revealed a transition at 2.65 T at 0.1 K, a field significantly higher than the mode-softening field observed by powder INS, showing that the field-induced phase transitions are highly field-direction dependent as expected. Furthermore, these measurements suggest that D-Er 2 Si 2 O 7 may be a candidate for further exploration related to the transverse field Ising model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Intermediate Species in the Crystallization of Sodium Aluminate Hydroxy Hydrates

In highly alkaline “water-in-salt” Na 2 O/Al 2 O 3 /H 2 O solutions where the monomeric Al(OH) 4 - anion dominates, isolation of transitional species that seed crystallization of sodium aluminate salt hydrates has been challenging. For example, discrimination of dimeric [e.g., Al 2 O(OH) 6 2- ] from species via 27 Al nuclear magnetic resonance (NMR) spectroscopy is limited via fast interconversion through hydrolysis and condensation reactions. Despite this, using magic-angle spinning NMR ( 27 Al MAS NMR) at high magnetic field strengths (14.1 and 20.0 T) on crystals of nonasodium bis(hexahydroxyaluminate) trihydroxide hexahydrate [NSA, Na 9 [Al(OH) 6 ] 2 ·3(OH)·6(H 2 O)], we observed a 27 Al resonance consistent with Na 2 Al 2 O(OH) 6 . This tetrahedral dimeric species was also identified in the mother liquor by Raman spectroscopy while remaining expectedly unresolved by high-field liquid-state 27 Al NMR. Its substantial abundance in the mother liquor and as either an interstitial or an adsorbate on precipitated solids suggest that it plays a crucial role in NSA crystallization. Here, our detailed characterization, which includes single-pulse 27 Al MAS NMR, nutation 27 Al MAS NMR, and multiple quantum 27 Al MAS NMR, provides new molecular insights into how aluminate transitions from tetrahedral in solution to octahedral in solid. This understanding could ultimately lead to better predictions of aluminum phase change behavior in caustic sodium hydroxide with wide-ranging technological and environmental implications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Degradation mechanism of lead-vanado-iodoapatite in NaCl solution

Degradation mechanism of lead-vanado-iodoapatite (IAPT) in NaCl solution at 90 °C was investigated through systematic characterization of surface morphology, microstructure and microchemistry evolution of the alteration layer. Nano-scale characterization indicated that IAPT crystals degraded from grain boundaries toward inner grains, forming ultrafine Cl-bearing crystallites. A coupled interface dissolution-reprecipitation replacement mechanism and the ion exchange between Cl - and I - across the degradation zone may together play roles in determining the nano-scale degradation behavior of IAPT. This work highlights the degradation through multiple reactions and elemental transport across the liquid-solid and solid-solid interfaces at length scales from sub-millimeter to nanoscale.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗