Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Coulomb”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Seasonal and Long‐Term Groundwater Unloading in the Central Valley Modifies Crustal Stress

Abstract Changes in terrestrial water content cause elastic deformation of the Earth's crust. This deformation is thought to play a role in modulating crustal stress and seismicity in regions where large water storage fluctuations occur. Groundwater is an important component of total water storage change in California, helping to drive annual water storage fluctuations and loss during periods of drought. Here we use direct estimates of groundwater volume loss during the 2007–2010 drought in California's Central Valley obtained from high resolution Interferometric Synthetic Aperture Radar‐based vertical land motion data to investigate the effect of groundwater volume change on the evolution of the stress field. We show that GPS‐derived elastic load models may not capture the contribution of groundwater to terrestrial water loading, resulting in an underestimation of nontectonic crustal stress change. We find that groundwater unloading during the drought causes Coulomb stress change of up to 5.5 kPa and seasonal fluctuations of up to 2.6 kPa at seismogenic depth. We find that faults near the Valley show the largest stress change and the San Andreas fault experiences only ~40 Pa of Coulomb stress change over the course of a year from groundwater storage change. Annual Coulomb stress change peaks dominantly in the fall, when the groundwater level is low; however, some faults experience peak stress in the spring when groundwater levels are higher. Additionally, we find that periods of increased stress correlate with higher than average seismic moment release but are not correlated with an increase in the number of earthquakes. This indicates groundwater loading likely contributes to nontectonic loading of faults, especially near the Valley edge, but is not a dominant factor in modulation of seismicity in California because the amplitude of stress change declines rapidly with distance from the Valley. By carefully quantifying and spatially locating groundwater fluctuations, we will improve our understanding of what drives nontectonic stress and forces that modulate seismicity in California.

58 GEOSCIENCES↗
DOE OSTI2020

Electrolyte design for LiF-rich solid–electrolyte interfaces to enable high-performance microsized alloy anodes for batteries

Lithium batteries with Si, Al or Bi microsized (>10 µm) particle anodes promise a high capacity, ease of production, low cost and low environmental impact, yet they suffer from fast degradation and a low Coulombic efficiency. In this paper, we demonstrate that a rationally designed electrolyte (2.0 M LiPF 6 in 1:1 v/v mixture of tetrahydrofuran and 2-methyltetrahydrofuran) enables 100 cycles of full cells that contain microsized Si, Al and Bi anodes with commercial LiFePO 4 and LiNi 0.8 Co 0.15 Al 0.05 O 2 cathodes. Alloy anodes with areal capacities of more than 2.5 mAh cm -2 achieved >300 cycles with a high initial Coulombic efficiency of >90% and average Coulombic efficiency of >99.9%. These improvements are facilitated by the formation of a high-modulus LiF–organic bilayer interphase, in which LiF possesses a high interfacial energy with the alloy anode to accommodate plastic deformation of the lithiated alloy during cycling. Lastly, this work provides a simple yet practical solution to current battery technology without any binder modification or special fabrication methods.

25 ENERGY STORAGE↗
DOE OSTI2022

Efficient evaluation of the Breit operator in the Pauli spinor basis

The frequency-independent Coulomb–Breit operator gives rise to the most accurate treatment of two-electron interaction in the non-quantum-electrodynamics regime. The Breit interaction in the Coulomb gauge consists of magnetic and gauge contributions. The high computational cost of the gauge term limits the application of the Breit interaction in relativistic molecular calculations. In this work, we apply the Pauli component integral–density matrix contraction scheme for gauge interaction with a maximum spin- and component separation scheme. We also present two different computational algorithms for evaluating gauge integrals. One is the generalized Obara–Saika algorithm, where the Laplace transformation is used to transform the gauge operator into Gaussian functions and the Obara–Saika recursion is used for reducing the angular momentum. The other algorithm is the second derivative of Coulomb interaction evaluated with Rys-quadrature. This work improves the efficiency of performing Dirac–Hartree–Fock with the variational treatment of Breit interaction for molecular systems. In conclusion, we use this formalism to examine relativistic trends in the Periodic Table and analyze the relativistic two-electron interaction contributions in heavy-element complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Further investigation on the fusion of 6 Li with 209 Bi target at near-barrier energies

The complete and incomplete fusion cross sections for 6 Li+ 209 Bi were measured using the in-beam γ-ray method around the Coulomb barrier. The cross sections of (deuteron captured) incomplete fusion (ICF) products were re-quantified experimentally for this reaction system. Here, the results reveal that the ICF cross section is equivalent to that of complete fusion (CF) above the Coulomb barrier and dominant near or below the Coulomb barrier. A theoretical calculation based on the continuum discretized coupled channel (CDCC) method was performed for the aforementioned CF and ICF cross sections; the result is consistent with the experiments. The universal fusion function (UFF) was also compared with the measured CF cross section for different barrier parameters, demonstrating that the CF suppression factor is significantly influenced by the choice of potential, which can reflect both dynamic and static effects of breakup on the fusion process.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Impact of penetrating collisions of plasma ions on spectral line shapes

Spectral-line-broadening models have been moving towards including full Coulomb interactions between the atom and plasma, replacing the commonly used dipole approximation. The effects of the full Coulomb interaction have been thoroughly explored for plasma electrons, resulting in redshifts of spectral lines in high-energy-density plasmas. We explore the impact of a full Coulomb treatment on ion broadening. Penetrating collisions due to ions do not significantly impact the linewidths. The most significant aspect is the appearance of quasimolecular resonances in the far line wings, such as those previously observed in white-dwarf spectra. We identify several problems with the existing models. The most direct implementation causes the quasimolecular features to appear at the wrong photon energies. It is possible to include the detailed molecular structure, but this currently requires the Anderson-Talman approximation, which ignores the N-body properties of the plasma. We find that N-body effects can substantially broaden these quasimolecular features and even shift them, depending on the plasma conditions. We conclude that penetration of ions into the spatial extent of the radiator wave function does not strongly affect the usual diagnostics and may have a moderate to weak effect on opacity. Furthermore, the Rosseland mean opacity is weighted towards low-opacity regions of a spectrum, where these quasimolecular features are found.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Electric Field Analysis in a Cold-Ion Source Using Stark Spectroscopy of Rydberg Atoms

Here, we analyze electric fields in ion sources generated by quasicontinuous photoionization of cold Rb atoms trapped in the focal spot of a near-concentric, in-vacuum cavity for 1064-nm laser light. Ion streams are extracted with an external electric field, F. Stark effects of Rb 57F and of nearby high-angular-momentum Rydberg levels, which exhibit large, linear Stark shifts, are employed to study the net electric-field probability distribution within the ion-source region over an extraction-field range of 0 < F < 0.35 V/cm. For F = 0, we also investigate ion-field-induced Stark spectra of the 60P 1/2 state, which exhibits a (lesser) quadratic electric-field response that affords a simplified electric-field analysis. Experimental Rydberg spectra are compared with theoretical Stark spectra, which are weighted with net electric-field distributions obtained from classical ion-trajectory simulations that include Coulomb interactions. Experiments and models are in good agreement. At small F and high ion-source rates, the field approximately follows a Holtsmark distribution, and the ion streams are degraded by the Coulomb microfields. With increasing F and at lower ion-source rates, the fields become narrowly distributed around F, resulting in directional ion streams that are less degraded by microfields. Our results are of interest for monitoring cold-ion sources for focused-ion-beam applications, where Coulomb interactions are of concern, and for studies of electric fields in cold plasmas.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Collective modes in excitonic insulators: Effects of electron-phonon coupling and signatures in the optical response

Here, we consider a two-band spinless model describing an excitonic insulator (EI) on the two-dimensional square lattice with anisotropic hopping parameters and electron-phonon (el-ph) coupling, inspired by the EI candidate Ta 2 NiSe 5 . We systematically study the nature of the collective excitations in the ordered phase which originates from the interband Coulomb interaction and the el-ph coupling. When the ordered phase is stabilized only by the Coulomb interaction (pure EI phase), its collective response exhibits a massless phase mode in addition to the amplitude mode. We show that in the BEC regime, the signal of the amplitude mode becomes less prominent and that the anisotropy in the phase-mode velocities is reduced. Through coupling to the lattice, the phase mode acquires a mass and the signal of the amplitude mode becomes less prominent. Importantly, the character of the softening mode at the boundary between the normal semiconductor phase and the ordered phase depends on the parameters. In particular, we point out that even for el-ph coupling smaller than the Coulomb interaction, the mode that softens to zero at the boundary can have a phonon character. We also discuss how the collective modes can be observed in the optical conductivity. Furthermore, we study the effects of nonlocal interactions on the collective modes and show the possibility of realizing a coexistence of an in-gap mode and an above-gap mode split off from the single-amplitude mode in the system with local interactions only.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Correlated metals and unconventional superconductivity in rhombohedral trilayer graphene: A renormalization group analysis

Here, motivated by recent experimental observations of correlated metallic phases and superconductivity in rhombohedral trilayer graphene (RTG), we perform an unbiased study of electronic ordering instabilities in hole-doped RTG. Specifically, we focus on electronic states energetically proximate to Van Hove singularities (VHSs), where a large density of states promotes different interaction-induced symmetry-breaking electronic orders. To resolve the Fermi surface near VHSs, we construct a fermionic hot-spot model and demonstrate that a perpendicular electric field can tune different nesting structures of the Fermi surface. Subsequently, we apply a renormalization group analysis to describe the low-energy phase diagrams of our model under both short-range repulsive interactions as well as realistic (long-range) Coulomb interactions. Our analysis shows instabilities towards either intervalley coherent metallic phases or superconducting phases. The dominant pairing channel depends crucially on the nature of Fermi surface nesting—repulsive Coulomb interaction favors spin-singlet d-wave pairing for relatively small displacement field and spin-singlet i-wave pairing for larger displacement field. We argue that the phase diagram of RTG can be well-understood by modeling the realistic Coulomb interaction as the sum of repulsive density-density interaction and ferromagnetic spin-triplet intervalley coherence (IVC) Hund's coupling, while phonon-mediated electronic interactions have a negligible effect on this system, in sharp contrast to twisted graphene multilayers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Spontaneous Localization at a Potential Saddle Point from Edge State Reconstruction in a Quantum Hall Point Contact

Quantum point contacts (QPCs) are an essential component in mesoscopic devices. Here, in this work, we study the transmission of quantum Hall edge modes through a gate-defined QPC in monolayer graphene. We observe resonant tunneling peaks and a nonlinear conductance pattern characteristic of Coulomb-blockaded localized states. The in-plane electric polarizability reveals the states are localized at a classically unstable electrostatic saddle point. We explain this unexpected finding within a self-consistent Thomas-Fermi model, finding that localization of a zero-dimensional state at the saddle point is favored whenever the applied confinement potential is sufficiently soft compared to the Coulomb energy. Our results provide a direct demonstration of Coulomb-driven reconstruction at the boundary of a quantum Hall system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Dielectric screening and vacancy formation for large neutral and charged Si n H m ( n > 1500 ) nanocrystals using real-space pseudopotentials

A commonly used procedure for computing the properties of defects in crystalline materials is to consider a large supercell that includes the defect of interest. This is a straightforward technique as standard energy band codes can be used for such computations. For neutral defects, the only impediment of such an approach is to avoid defect-defect interactions between adjoining cells. However, this procedure can be complex if the defect of interest is charged as the system at large contains Coulombic divergences. Moreover, some have recently argued that the conventional definition of formation energies for charged defects cannot be reconciled with statistical mechanics. Here, we focus on an alternative approach. We consider large nanocrystals wherein a charged defect can be placed. Since the system is confined, a charged defect within the nanocrystal does not result in a Coulombic divergence. The chief impediment is computational, i.e., while no defect-defect or Coulombic divergences are present, the nanocrystal must be sufficiently large to allow the system to properly replicate a bulklike configuration. With the development of new algorithms and hardware advances, computations for systems of sufficient size to address this issue are feasible. In particular, we solve the Kohn-Sham equation in real space using pseudopotential-density-functional theory for large silicon nanocrystals, which contain thousands of atoms. Further, we focus on (i) the screening of a point charge and (ii) the formation of a charged vacancy in hydrogen-terminated silicon nanocrystals. This approach allows us to examine the role of quantum confinement in addition to exploring the bulk limit. Comparisons to other methods confirm the viability of this approach.

36 MATERIALS SCIENCE↗
DOE OSTI2025

LiCl–Based Aqueous Electrolytes for Efficient Iron Electrodeposition

This study investigates room temperature, aqueous electrolytes for efficient iron electrodeposition. Specifically, a novel lithium chloride-based electrolyte was identified to suppress hydrogen evolution while promoting fast kinetics of iron electrodeposition, achieving high coulombic efficiency (>90%) at high current densities (>400 mA cm −2 ). Electrochemical analysis of the partial current densities of iron deposition and hydrogen co-evolution revealed that water reduction is kinetically suppressed in this electrolyte, resulting in an increase in the measured coulombic efficiency. Furthermore, a detailed investigation of the iron speciation and their complexation was performed, which revealed that, in concentrated LiCl-containing electrolytes, the ferrous (Fe 2+ ) species coordinate with chloride rather than water, enhancing deposition kinetics. The combined effect of enhanced electrodeposition kinetics and suppressed water activity provide elevated coulombic efficiency. Overall, this paper develops an understanding of anion and cation effects on the mechanism of electrodeposition and hydrogen co-evolution in concentrated electrolytes in search of improved aqueous media (e.g., concentrated LiCl) for efficient metal electro-synthesis.

Lvovich, William [Case Western Reserve University,↗
DOE OSTI2021

Dual Function Solid State Battery with Self-Forming Self-Healing Electrolyte and Separator (Final Scientific/Technical Report)

Over the course of this program, we have demonstrated an improved rechargeable Li/I2 battery with reduced impedance, improved cyclability, improved Coulombic Efficiency, and the ability to “self-heal” during shorting events. Multi-year efforts have led to the development and improvements in the composition, fabrication, and preparation of the solid state electrolyte, the role of the interface, and design of appropriate test conditions. These investigations have led to significant improvements in Coulombic efficiency. By systematic development of a composite solid state electrolyte, this system is able to self-form upon charge, thus lending itself to long shelf life before use. The initial project objective was to demonstrate a solid-state rechargeable battery based on a Li-metal anode and iodine cathode with a self-forming, self-healing electrolyte and separator with high gravimetric and volumetric energy density. The final deliverables of this project build on a multi-year effort beginning with materials development and design to generate a suitable solid state electrolyte composite with demonstrated higher ionic conductivity compared to the baseline (LiI). Development in cell design and interface modification leading to the generation of rechargeable solid electrolyte cells with Coulombic efficiency improvements of ~3X over initial tests, as well as demonstration of self-healing behavior, where the cells retained their ability to continue extended cycling after shorting events. The hypothesis put forward as part of the initial concept for the project was that the cell chemistry would be self-healing. For example, if a lithium dendrite formed during charge of the cell and reached the iodine cathode, the reaction of the lithium dendrite with the iodine would consume the tip of the dendrite to form lithium iodide, more of the solid electrolyte. The formation of the solid electrolyte would allow the cell to recover and continue to function. This type of self-healing during cycling has been demonstrated and has the potential to improve on safety considerations that stem from shorting events in other Li- containing systems.

25 ENERGY STORAGE↗
DOE OSTI2023

Disorder, interactions, and their interplay in novel narrow-gap Dirac materials and Weyl semimetals

Progress of the modern day condensed matter physics is to a large extent driven by the synthesis of new materials, advances in their experimental characterization and theoretical description. Recent discoveries of novel gapless Weyl semimetals, such as NaBi,CdAs, and BiTe-based films, in which magnetic dopants essentially suppress the gap, have added to the family of graphene and topological insulators actively investigated over the past decade. With the field of novel semimetals rapidly maturing, its focus necessarily shifts from demonstrations of the feasibility of such materials to their quantitative characterization. While the transport and optical properties of graphene and topological insulators are well captured within the picture of free non-interacting electrons, gapless 3D Weyl semimetals and narrow-gap 2D semiconductors with Dirac spectrum are known to be extremely susceptible to disorder and electron-electron interactions. This susceptibility obscures the manifestations of nontrivial band structure -- like quantum anomalous Hall effect -- of the new topological materials. Among particular projects to be addressed are: 1) optical conductivity of 3D gapless Dirac fermions in the presence of smooth disorder, 2) interplay of disorder and Coulomb interactions in the spectral properties of such fermions, 3) formation and structure of the impurity band with Coulomb supercritical clusters, 4) Coulomb interaction-driven renormalization of the electron spectrum and of the transport response in the presence of strong magnetic field, 5) instanton approach to the disorder-induced fluctuation states in zero-gap 3D materials, and 6) the role of disorder in quantum anomalous Hall effect. The proposal relies upon the investigators' previous broad expertise in interacting and disordered electron systems. The methods to be employed include perturbative diagrammatic technique, non-perturbative instanton and self-consistent approximations, hydrodynamics of electron liquid. Both analytical as well as numerical approaches are to be employed. The anticipated broader outcome of the proposal includes gaining an in-depth understanding of the interplay of the disorder and interactions under the conditions when this interplay has the most dramatic impact on observables. Traditionally, interaction effects are among the most challenging and interesting problems of condensed matter physics. Similarly, disordered systems typically present very difficult but extremely rich problems in the description of various materials. Importantly, understanding the spectral and transport properties of such materials not only presents the fundamental objective, but is also of particular interest for many applications, such as computation, memory, optics, plasmonics. In particular realization of the quantum anomalous Hall effect may lead to the development of low-power-consumption electronics. Indeed, a major constraint for practical use of the quantum Hall effect is limited by the requirement of the quantizing magnetic field. At the same time, the quantum anomalous Hall effect samples exhibit non-dissipative edge quantum transport in a zero magnetic field.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Collaborative Research: Unravelling the Physics Associated with the Production of Extremely Dense Plasma States of Microscale (Final Report) Nanosecond-pulsed Discharges

The aim of this project is to study and establish the physical mechanisms that contribute to the formation of anomalously dense plasmas in high-pressure nanosecond-pulsed discharges. These discharges have a broad range of applications such as plasma-assisted combustion, plasma flow actuators, biomedical sterilization and exotic materials synthesis. The structure and formation of these discharges, producing high plasma densities of ~10 14 -10 15 cm -3 , are well-studied and understood. Fast-pulsed microscale high-pressure discharges can be driven to even higher densities of > 10 19 cm -3 , approaching warm dense matter conditions. The mechanisms that generate these plasmas have not been understood. Analysis of the warm dense matter state under laboratory conditions is an expensive and non-trivial endeavor. For instance, dense plasmas can be generated by electrical explosions of metal foils and wires. Plasmas generated after the explosion have a short lifetime and often present difficult conditions for diagnostics. Generation of dense plasmas was also achieved during high-voltage nanosecond pulsed discharges when the so-called explosive electron emission is obtained. Unfortunately, this process is very difficult to control for the studies of warm dense matter. In our recent study, we have shown that additional heating of plasma by lasers can further increase the density of plasma and even lead to the fully ionized state. This method, potentially, allows better control of the plasma parameters. In this work, we studied a second stage laser-heated micro-discharge using a self-consistent one-dimensional particle-in-cell Monte Carlo-collision (1D PIC-MCC) model coupled with Maxwell’s equations. We predicted the generation of a fully ionized plasma on the picosecond time scale. However, this model considered the plasma as an ideal gas despite the high pressure and the nearly fully ionized state. The ideal plasma model assumes that the dilute gas approximation is valid, where the inter-particle interactions are negligible. For charged particles this assumption holds as long as the shielded Coulomb potential assumption is valid. For very high plasma densities, this concept breaks down since the Debye sphere surrounding each charged particle no longer contains enough electrons to statistically provide the shielding of the single particle Coulomb interaction potential. At such densities, the plasma can no longer be described as ideal and non-ideal coupling effects need to be considered. In this report, we elucidate our recent work of developing a PIC-MCC model with improvements for non-ideal plasma conditions due to Coulomb coupling at high densities. In particular, we study the interaction of green light radiation and a dense microplasma, and explore the non-ideal plasma effects in this interaction. In this computational model, we implement the two most important non-ideal effects: ionization potential depression (IPD) and enhanced collision cross sections. Our primary goal is to study the physics associated with electromagnetic (EM) wave heating, also called the second-stage wave-heating, and establish the role of plasma non-ideality in this phenomenon. Our secondary goal is to improve the chemistry mechanism of the 1D PIC-MCC model by including a more detailed excited species collision treatment. At high pressures, stepwise ionization from excited species might play an important role in the ionization process. Previously, this ionization mechanism was neglected due to the excitation collision cross section of xenon being smaller than that of ionization. However, a preliminary study showed that the excited species density in the initial microplasma was an order of magnitude higher than the electron density. Therefore, my aim is to determine the significance of this additional ionization pathway to the plasma generation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Dynamical Pair Production at Sub-Barrier Energies for Light Nuclei

In the collision of two heavy ions, the strong repulsion coming from the Coulomb field is enough to produce e+e− pair(s) from vacuum fluctuations. The energy is provided by the kinetic energy of the ions and the Coulomb interaction at the production point. If, for instance, the electron is located at the center of mass (C.M.) of the two ions moving along the z-axis, and the positron is at a distance x from the electron, the ions can be accelerated towards each other since the Coulomb barrier is lowered by the presence of the electron. This screening results in an increase in the kinetic energy of the colliding ions and may result in an increase in the fusion probability of light ions above the adiabatic limit.

Settlemyre, Thomas (ORCID:0000000276824773)↗
DOE OSTI2024

Proton and neutron density distributions at supranormal density in low- and medium-energy heavy-ion collisions. II. Central Pb + Pb collisions

This paper represents a continuation of our investigation into the limitations on total, proton, and neutron particle number densities, as well as the asymmetry of proton and neutron density distributions achievable in central heavy-ion collisions. We explore these aspects at low and medium energies within the framework of the Boltzmann-Uhlenbeck-Uehling (pBUU) transport and time-dependent Hartree-Fock (TDHF) models. Previous studies, focusing on symmetric and asymmetric collisions of Ca and Sn nuclei [1], and initial results on Pb-nuclei collisions [2], emphasized the role of the Coulomb interaction in these events. Our findings indicated that: (i) the highest total densities predicted at 𝐸 beam = 800 MeV/nucleon were on the order of ≈ 2.5⁢𝜌 0 (𝜌 0 = 0.16 fm −3 ), (ii) the proton-neutron asymmetry for maximal densities, 𝛿=(𝜌$^{max}_{n}$− 𝜌$^{max}_{p}$)/(𝜌$^{max}_{n}$+𝜌$^{max}_{p}$), did not generally exceed the asymmetry in the initial state of the collision at all beam energies and tended to decrease during the reaction, and (iii) a significant portion of this asymmetry had its microscopic origin in Coulomb forces, masking the pure nuclear contribution. These new findings, particularly relevant in the astrophysical context, are further examined in this work, focusing on the heaviest target-projectile combination 212,208 Pb accessible in an experiment. We introduce the SkT3 Skyrme force model, not previously used for the Pb system, and compare it to the SV-bas and SV-sym34 models to explore the symmetry-energy dependence of the results. Contour plots of nucleonic densities are presented, contrasting the time evolution of the density distributions in low (TDHF) and high (pBUU) models. We also present the evolution of normalized maximal proton, neutron, and total nucleon number density with increasing beam energy in the full pBUU model and the Vlasov approximation, aiming to explore the impact of correlations in the reaction. The time evolution of the proton and neutron density distributions in the plane transverse to the beam direction is illustrated at both low and high beam energy. In conclusion, our detailed examination of the Pb system in this work provides further essential evidence that the aforementioned findings (i)–(iii) are only weakly dependent on system size and a symmetry-energy model, and thus, they are of more general importance.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Direct and Inverse Photoelectron Spectroscopy Evidence for a Revised Picture of Electronic States of Negative Polarons in n‐Doped C 60

Abstract Determining the electronic levels associated with polarons, the fundamental charge carriers in organic semiconductors, is key to understanding the charge transport properties of these materials. Recent findings challenge the traditional view of these electronic levels by highlighting the importance of intra‐molecular Coulomb interactions in polarons. Experimental evidence was previously presented for a revised model of the negative polaron in the case of the polymer semiconductor poly(NDI2OD‐T 2 ); there, the addition of an excess electron was seen to lead to the emergence of a singly occupied state within the energy gap of the undoped material and an unoccupied state above the edge of the conduction states . Here, focus is on a small‐molecule semiconductor, C 60 , and spectral evidence is provided of a similar picture for the new states appearing upon polaron formation. Specifically, direct and inverse photoemission spectroscopy is used to investigate the density of states in C 60 films n‐doped with two dimeric dopants. The Coulomb interaction energy (Hubbard U ) of the C 60 anion is experimentally determined to be ≈1.1 eV, a value that aligns closely with theoretical predictions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Imitating Architectural Mortise‐Tenon Structure for Stable Ni‐Rich Layered Cathodes

Ni-rich layered oxides are the most promising cathodes for Li-ion batteries, but chemo-mechanical failures during cycling and large first-cycle capacity loss hinder their applications in high-energy batteries. Herein, by introducing spinel-like mortise-tenon structures into the layered phase of LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811), the adverse volume variations in cathode materials can be significantly suppressed. Meanwhile, these mortise-tenon structures play the role of the expressway for fast lithium-ion transport, which is substantiated by experiments and calculations. Moreover, the particles with mortise-tenon structures usually terminate with the most stable (003) facet. The new cathode exhibits a discharge capacity of 215 mAh g –1 at 0.1 C with an initial Coulombic efficiency of 97.5%, and capacity retention of 82.2% after 1200 cycles at 1 C. Importantly, this work offers a viable lattice engineering to address the stability and low initial Coulombic efficiency of the Ni-rich layered oxides, and facilitates the implementation of Li-ion batteries with high-energy density and long durability.

25 ENERGY STORAGE↗