Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Catalytic Conversion of Model Compounds of Plastic Pyrolysis Oil over ZSM-5

Mechanistic investigation of the catalytic conversion of model compounds for plastic pyrolysis oil (1-octene, octadiene, octane, and toluene) over ZSM-5 in a fixed-bed reactor was studied. 1-Octene breaks down into smaller olefins, which undergo further cracking, oligomerization, cyclization, and hydrogen transfer to eventually produce benzene, toluene, xylene (BTX), coke, and hydrogen. The effect of contact time on 1-octene conversion was further investigated and compared with thermodynamics analyses to elucidate the reaction network. Under the reaction conditions (500 oC, 1 atm), octadiene undergoes thermal coking, significantly contributing to reactor fouling. The products from octane cracking are similar to the products from 1-octene conversion whereas toluene undergoes disproportionation, dealkylation and coking. The analysis of spent catalyst showed long-chain hydrocarbons created by oligomerization reactions filled the pores and covered the surface of the catalyst. As a result, when mesoporous ZSM-5 is used instead of conventional, product selectivity is maintained for 70 hours in time-on-stream experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Catalytic direct conversion of ethane to value-added chemicals under microwave irradiation

The reaction mechanism of ethane conversion over 4 % Mo-0.5 % Fe/ZSM-5 catalyst was investigated using two different reactors with different heating modes. A microwave fixed-bed reactor (MWFB) was used and its performance was compared to a conventional thermal fixed-bed reactor (CTFB). Over 80 % ethane conversion was achieved under microwave irradiation mode at 375 °C. Here, to achieve the same ethane conversion conventionally, the reaction temperature had to be elevated to 660 °C in the CTFB. The formation rates and selectivity of the products were compared under these two heating methods. The CTFB products had a higher selectivity towards aromatic compounds; whereas, the MWFB products had a higher selectivity towards ethylene; 26.5 % higher than the CTFB. Carbon analysis over spent catalysts of CTFB showed three distinct types of coke, whereas the microwave resulted in a single higher temperature coke type.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Comparative techno-economic analysis of synthetic renewable natural gas production via reactive CO 2 capture and conversion

Reactive CO 2 capture and conversion (RCC) is an emerging carbon management strategy that integrates CO 2 capture and conversion and avoids intermediate CO 2 purification. In this study, we design an RCC process to capture atmospheric CO 2 and react it with renewable hydrogen to produce synthetic renewable natural gas (SRNG), which serves as a carbon-neutral energy source and a chemical form of long-duration renewable energy storage. We assess the technological potential of RCC through process modeling, techno-economic, carbon footprint, and sensitivity analyses. Our findings demonstrate that RCC offers energy savings and comparable cost to separated capture and conversion processes. The cost is dominated by renewable hydrogen and material replacement cost. SRNG produced via RCC is competitive with existing low-carbon natural gas technologies and presents a promising low-cost option for long-duration energy storage. This work highlights the potential for deploying RCC technologies within a circular carbon economy and the scientific and technical challenges that must be overcome for material and technology developers.

03 NATURAL GAS↗
DOE OSTI2026

Catalytic monoterpenes conversion over Pd and zeolite to sustainable aviation fuel

Waste terpenes from wood drying are typically processed using a Regenerative Thermal Oxidizer (RTO) and converted to CO2 which is then released to the atmosphere. A novel alternative to this approach is to capture these terpenes using Fluidized Bed Concentrator (FBC) technology developed by CaptisAire which provides a useful waste carbon feedstock for subsequent upgrading. We have developed a catalytic approach where these waste terpenes (comprised of pinenes, limonene, and camphene), are converted to aromatic, and cycloalkane hydrocarbons suitable for use as a Sustainable Aviation Fuel (SAF) blendstock without the need for additional hydrogen. This provides a renewable source for aviation fuel aromatics and increases the potential blend content of renewably sourced alkanes from Hydroprocessed Esters and Fatty Acids (HEFA) and Alcohol to Jet (ATJ) processes. Terpenes were converted in a batch reactor at 260 °C and 120 psi N2 using a combination of Pd/C and H-BEA zeolite. Experimental results infer the role of the zeolite Brønsted acid to facilitate isomerization of pinenes and camphene to limonene, which then undergoes subsequent dehydro-aromatization to p-cymene using Pd/C. Hydrogen release from the dehydro-aromatization process, enables inert conversion of monoterpenes to cycloalkanes without additional hydrogen. Monoterpenes conversion to C10 aromatics (60%) and C10 cycloalkanes (40%) in an inert environment, provides a viable route for SAF blendstock sourced directly from captured waste terpenes. Transition to commercial off-the-shelf catalysts, facilitates scale-up of the terpene conversion process and improves commercial viability. We subsequently created hydrocarbon blends using HEFA or ATJ and converted terpenes, providing a 100% SAF blend with potential to replace traditional Jet-A.

Lawal, Ajibola [ORNL] (ORCID:0000000187266570)↗
DOE OSTI2022

The role of lignin in the conversion of wheat straw to cellobionic acid by Neurospora crassa HL10

An engineered Neurospora crassa strain (HL10) naturally produces cellulases, cellobiose dehydrogenase (CDH), and heterologously expresses laccase. It can convert Avicel (cellulose) to cellobionic acid (cellobionate) without any enzyme addition at high yields. However, the addition of a catalytic amount of artificial redox mediators was required to achieve a high yield conversion. When a lignocellulosic substrate like wheat straw was used as the carbon source, it was found that adding exogenous artificial redox mediators did not improve cellobionate yield. We hypothesized that lignin and lignin degradation products were able to serve as redox mediators for the CDH-laccase conversion system. Experiments were designed to prove the hypothesis. When N. crassa HL10 was grown on Avicel, the addition of enzyme hydrolyzed lignin (EHL) can achieve a similar level of cellobionate production as with ABTS addition. The addition of EHL can increase the cellobionate production rate in the CDH-laccase bi-enzyme system using cellobiose as the substrate. The formation of lignin radicals, and the quenching of lignin radicals by reduced CDH, were verified by an electron paramagnetic resonance (EPR) experiment, providing further evidence that lignin radicals can serve as the electron acceptor of reduced CDH. Hence, lignocellulosic biomass is a self-sufficient substrate for the production of cellobionate. The conversion of the lignocellulosic substrate to cellobionate using N. crassa HL10 can be achieved without any exogenous enzyme addition or redox mediator addition.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Green synthesis of cellulose formate and its efficient conversion into 5-hydroxymethylfurfural

5-hydroxymethylfurfural (HMF) production from cellulose is a hot topic, while the rigidity of cellulose limits its efficient conversion into HMF. Cellulose formate has exhibited the great potential for HMF production but it’s synthesis via direct formylation of cellulose in formic acid is difficult. We reported a green synthetic route of cellulose formate and its efficient conversion into HMF. Ball milled cellulose formate (BCF) was synthesized via ball milling followed by formylation in formic acid at 80 °C for 0.5 h. The structure of BCF was thoroughly characterized and BCF was subsequently converted to HMF catalyzed by AlCl3 and HCl in dimethyl sulfoxide (DMSO)-H 2 O media. Results showed that ball milling of cellulose for 1–1.5 h efficiently deconstructed its crystallinity and degree of polymerization, boosting its further formylation and catalytic conversion. An overall 66.9% HMF yield from cellulose was achieved at 150 °C for 20 min using BCF derived from cellulose ball milled for 1.5 h as the substrate. BCF exhibits high reactivity toward HMF due to its excellent solubility and accessibility in DMSO-H 2 O media, and the release of formic acid in reaction further facilitates HMF production. BCF synthesized with different ball milling times shows different degrees of substitution of formyl groups, which could serve as an indicator and regulate the HMF production. The green synthesis of cellulose formate creates an efficient pathway for HMF production.

5-hydroxymethylfurfural↗
DOE OSTI2024

Pairing Ga/Al-Zeolites with tailored acidity as tandem catalysts for the conversion of alcohols to olefins

Zeolites are versatile catalysts owing to their tunable acidity where the active site(s) can be placed within the crystal framework or as extra-framework species in confined pores. A common approach to tailor Brønsted acidity is heteroatom exchange involving the replacement of framework aluminum with alternative elements. Introduction of heteroatoms often results in less acidic catalysts that can be used in tandem reactions for targeted reactive intermediates. Here, in this study, we prepare a series of three different zeolites with MWW, CHA, and MFI frameworks as aluminosilicates and gallosilicates to demonstrate their performance in alcohol dehydration reactions. The two reactions examined in this study are methanol conversion to dimethyl ether and ethanol conversion to ethylene. Our findings reveal that Ga-zeolites exhibit superior performance with Ga-MCM-22 (MWW) achieving nearly 100% alcohol conversion and selectivity to desired products at contact times that are significantly less than most dehydration catalysts reported in literature. The unique properties of Ga-zeolites are attributed to their reduced acid site strength via a direct (one-pot) synthesis that avoids conventional time-intensive, multi-step post-synthesis modifications of Al-zeolites. Here we demonstrate the use of Ga-zeolites as tandem catalysts when paired with a downstream Al-zeolite in a dual-bed reactor configuration to convert cheaper reagents (alcohols) upstream to more desired intermediates as feeds for downstream catalysts to produce light olefins. We demonstrate that dual beds using Ga-zeolite – Al-ZSM-5 (upstream–downstream) pairings outperform single bed configurations with Al-ZSM-5 or a physical mixture (Ga-/Al-zeolite) for methanol to hydrocarbons reactions, with notable improvements in catalyst lifetime and increased light olefins selectivity. Similarly, dual beds using Ga-zeolite – Al-SSZ-13 (upstream–downstream) pairings result in improved performance for ethanol to propylene reactions with significant increases in propylene selectivity (>20 %) compared to a conventional single bed configuration of Al-SSZ-13. Overall, this study offers a new perspective on the use of heteroatom-exchanged zeolite catalysts in tandem reactions as a means of capitalizing on their reduced acid site strength and suggests differences in the intrinsic acidity of zeolite crystal structures.

42 ENGINEERING↗
DOE OSTI2023

Meta-analysis of biogas upgrading to renewable natural gas through biological CO 2 conversion

Biogas upgrading through CO 2 conversion by hydrogenotrophic methanogenesis is receiving an increasing attention worldwide because of the demand for renewable natural gas. Herein, a holistic and statistical study of the operation conditions, driving forces, performances, and potential implementation of biogas upgrading via biological CO 2 conversion was conducted. Based on a systematic review and meta-analysis of 46 existing publications that were selected from 1475 papers, we have compiled a global dataset of CO 2 bioconversion biogas upgrading, encompassing 308 study cases. Subsequently, we employed a rigorous analytical framework incorporating data processing and mixed effects linear regression analysis to examine the dataset. This analysis revealed a significant positive relationship between the H 2 :CO 2 ratio and the methane percentage in the upgraded biogas when using the study as a random effect. Furthermore, we performed meta-analysis on observations taken when the ratio was close to 4:1 and found that ex situ reactors (91.93% [88.11%, 95.75%]) can perform better than in situ reactors (84.74% [80.69%, 88.80%]). No evidence of differential performance was found based on the present dataset between different temperature regimes or operation modes. Furthermore, those findings establish a database that will contribute to a deeper understanding of the biogas upgrading via biological CO 2 conversion.

Biogas upgrading↗
DOE OSTI2022

Conversion kinetics during melting of simulated nuclear waste glass feeds measured by dissolution of silica

In this work, we experimentally investigated the batch-to-glass conversion kinetics of two low-activity and two high-level nuclear waste melter feeds that represent widely different behavior during melting; tests comprised thermogravimetric analysis, the feed expansion test, evolved gas analysis, and x-ray diffraction. Our study indicates that the conversion processes, which include gas-evolving reactions, dissolution of crystalline phases, and primary foam expansion and collapse, are interconnected and influenced by the feed’s thermal history. The fraction of dissolved silica was adopted as a measure of the extent of conversion inside the cold cap—the floating layer of feed material on the top surface of the melt in an electric melter. The interface between the cold cap and the free-flowing melt below was associated with a constant fraction of dissolved silica. The estimated viscosity of glass-forming melt at this interface lies within a narrow range for the feeds studied.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

The Feasibility of Direct CO2 Conversion Technologies on Impacting Mid-Century Climate Goals

Recent IPCC modeling suggests that to limit global warming below 2 degrees C, "unprecedented" reductions in CO2 emissions will be required during the 2030-2050 time frame. The direct conversion of CO2 to fuels and chemicals using renewable electricity has garnered interest as one route to draw down emissions with the ability to synthesize products at a significantly lower carbon footprint than conventional methods. However, most direct CO2 conversion pathways are only in the early stages of development and face technical and market hurdles prior to scale-up, bringing into question what role they may play in influencing global CO2 emissions within this critical two-decade window. In this perspective, we highlight low-temperature electrolysis as a promising technology for direct CO2 conversion, including discussion on the products that could most impact global emission levels, and importantly, offer insight into the timeline, required advancements, and specific technical targets needed to successfully scale and deploy these technologies at the commercial level.

chemicals↗
DOE OSTI2022

Oxidative coupling of methane (OCM) conversion into C 2 products through a CO 2 /O 2 co-transport membrane reactor

Oxidative coupling of methane (OCM), which transforms CH 4 into C 2 products (C 2 H 6 and C 2 H 4 ) with molecular O 2 as the oxidant, is one of the most studied direct methane conversions (DMCs). However, a major technical hurdle to the OCM process is to achieve high CH 4 conversion at high C 2 (C 2 H 6 and C 2 H 4 ) selectivity. One rudimentary cause for this “tradeoff” behavior is the high chemical reactivity of the products (C 2 H 6 or C 2 H 4 ), which can be re-oxidized by O 2 . To overcome this thermodynamic challenge, minimizing the oxidizing power of the oxidant and lowering the local oxygen partial pressure are keys. Here, In this work, we demonstrate a new membrane reactor that capture CO 2 /O 2 from a flue gas and uses it for OCM conversion. The results show that the co-captured CO 2 /O 2 mixture converts CH 4 into C 2 H 6 in the presence of a 2%Mn–5%Na 2 WO 4 /SiO 2 catalyst, followed by thermal cracking of C 2 H 6 into C 2 H 4 and H 2 . The presence of CO 2 decreases the local partial pressure of O 2 , thus reducing the propensity of C 2 -products re-oxidation and leading to a higher C 2 selectivity. We show that a small button-type membrane reactor can achieve 12% C 2 yield with ~57% C 2 -selectivity using a diluted CH 4 -Ar mixture as the feedstock. We expect higher C 2 yield with tubular plug-flow membrane reactors in the future. We also highlight the unique advantage of the membrane reactor in intensifying CO 2 capture from both flue gas and OCM purification process into one single step.

42 ENGINEERING↗
DOE OSTI2026

Deep Learning enabled spectral energy conversion for in situ exposure measurements

A detector-specific deep learning (DL) approach is presented for spectra-to-exposure conversion using large-format sodium iodide (NaI(Tl)) detectors deployed for in situ environmental radiation measurements in emergency response scenarios. Accurate determination of exposure from NaI spectra is challenging due to poor energy resolution, partial energy absorption, and the strong sensitivity of traditionally deployed analytical conversion methods to calibrated source geometry and pre-deployment assumptions. Here, to address these limitations, a multi-layer perceptron model was trained on a hybrid in situ /Monte Carlo dataset constructed to span a broad range of photon energies, spatial extents, and realistic deployment variability, representative of general in situ emergency response conditions. The DL model was evaluated against commonly fielded analytical approaches under matched simulation conditions, including a single-factor method, a G-function method, and a modeled pressurized ion chamber (PIC) baseline. This study was intentionally computational in scope to enable controlled, like-for-like comparisons between conversion techniques while minimizing confounding real-world variability. Comparison to the modeled PIC provides contextual benchmarking and is not intended as a field inter-comparison with deployed instruments. Across the evaluated 20 keV to 3 MeV energy range, the DL approach consistently exhibited higher accuracy and reduced variance relative to the analytical methods against a deterministically calculated exposure. This may indicate improved robustness to spectral complexity without reliance on source-, geometric-, or spectral region-specific optimization. While results do not represent real-world validation, the presented work demonstrates that deep learning may effectively learn the nonlinear detector response-to-exposure relationship for asymmetric NaI(Tl) detectors and offers a promising pathway for improving in situ exposure estimation using spectroscopic systems already integrated into initial real-time emergency response operations.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2022

Significant improvement of conversion efficiency by passivation of low-angle grain boundaries in flexible low-cost single-crystal-like GaAs thin-film solar cells directly deposited on metal tape

We develop an easily implementable yet effective process to achieve high power conversion efficiency in newly-developed flexible single-crystal-like GaAs thin-film photovoltaic solar cells on cheap metal tape. We study various techniques on the fabricated devices to passivate the defect states associated with dangling bonds at low-angle grain boundaries (LA-GBs) existing in the single-crystal-like GaAs material. We report that sulfur by trioctylphosphine sulfide (TOP:S) solution treatment can partially but effectively passivate the defect states at the LA-GBs to increase all the solar cell performance parameters of open-circuit voltage VOC (33.2%), short-circuit current JSC (19.5%), and fill factor FF (25.8%), resulting in the improvement of the power conversion efficiency more than double. The material and device characterizations and numerical modeling are performed to propose a mechanism, also suggesting that the power conversion efficiency higher than 20%, which is an important target milestone in emerging solar cell technologies, can be achieved. This work presents the first effective passivation of the bulk defects in GaAs at the device level and can also offer a solution for other photonic and electronic devices using non-single-crystalline GaAs films for flexible electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Theoretical Perspective of Promoting Direct Methane-to-Methanol Conversion at Complex Metal Oxide–Metal Interfaces

Direct methane conversion to methanol has been considered as an effective and economic way to release greenhouse effects and current high demand on methanol in industry. However, the process has long been challenging due to lack of viable catalysts to compromise the activation of methane that typically occurs high temperatures and retaining of produced methanol that requires mild conditions. Here, this perspective demonstrates an effective strategy to promote direct methane to methanol conversion by engineering the active sites and chemical environments at complex metal oxide - copper oxide - copper interfaces. Such effort strongly depends on the extensive theoretical studies by combining density functional theory (DFT) calculations and kinetic Monte Carlo (KMC) simulations to provide in-depth understanding of reaction mechanism and active sites, which built the strong basis to enable the identification of design principles and advance the catalyst optimization for selective CH 4 -to-CH 3 OH conversion.

03 NATURAL GAS↗
DOE OSTI2025

Photoreactive Capture and Conversion of Dilute Carbon Dioxide into Synthetic Natural Gas

This study introduces a photoreactive system that integrates the capture of dilute CO 2 streams with their catalytic conversion to synthetic natural gas (CH 4 ), utilizing a Ru nanoparticle (NP)-doped TiO 2 composite loaded with linear polyethylenimine (L-PEI) and enhanced with plasmonic titanium nitride (TiN). This light-driven approach mitigates challenges that have plagued traditional thermal reactive carbon capture (RCC) methods, such as CO 2 slip and amine degradation. We demonstrate that L-PEI enables stable CO 2 capture and conversion, achieving ~70% conversion of captured CO 2 to CH 4 across multiple reaction cycles using nonflammable forming gas (~5% H 2 ) as the reductant. In contrast, branched PEI (B-PEI)-loaded composites exhibited significant catalyst deactivation after several RCC cycles. Scanning transmission electron microscopy (STEM) imaging confirms that significant sintering of the Ru NPs occur in the B-PEI sample under RCC conditions, whereas their size remains stable in more rigid L-PEI composites. Technoeconomic analysis (TEA) estimates that CH 4 production using this system could cost less than $\$$5/kg based on current electrocatalytic H 2 prices. These results represent one of the most promising demonstrations of amine-based RCC employing dilute CO 2 sources to date.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Impact of Site Identity, Location, and Accessibility on Polyethylene Conversion Rates and Product Selectivities over Metal-Free MFI Zeolites

Brønsted (BAS), Lewis (LAS), and surface Brønsted (SBAS) acid sites have been investigated for polyethylene (PE) upcycling by zeolite catalysts, but there is no clear consensus regarding their catalytic roles, partly due to the complexity of the catalysts used and varying reaction conditions across studies. This work systematically determined how these sites impact PE conversion rates and product distributions by utilizing a suite of microporous MFI catalysts with varying Si/Al ratios, acid site densities, and inherent mesoporosities. PE conversion rates did not trend with total BAS or LAS densities due to a combination of internal mass transfer limitation and the apparent inability of LAS alone to cleave C–C bonds, but a strong, statistically significant correlation was present with respect to SBAS density and mesopore surface area, jointly, owing to accelerated polymer activation on external surfaces to smaller diffusion-limited chains. However, ingress of these SBAS-derived fragments ultimately remained rate limiting, as demonstrated by solid conversion rates that increased with mesopore surface area at similar SBAS density and likewise increased with SBAS density at similar mesopore surface area. In batch PE cracking reactions, light gaseous product selectivities were most sensitive to total BAS, with higher densities generally exhibiting higher selectivity to C 3 and linear C 4 –C 7 products and higher alkane/alkene product ratios, consistent with increased β-scission turnovers. Insights from this work help systematically clarify the roles of BAS, LAS, SBAS, and mesopores in PE cracking reactions and inform the development of tailored zeolite catalysts for efficient polyolefin upcycling.

accessibility↗
DOE OSTI2024

Maximum and Comparative Efficiency Calculations for Integrated Capture and Electrochemical Conversion of CO 2

CO 2 as a C1 feedstock is receiving increasing attention, but it typically exists in dilute or impure streams. The capture and conversion of CO 2 to fuels or chemicals using carbon-neutral energy mitigates carbon emissions when CO 2 is captured from point sources and results in net or negative carbon emissions when CO 2 is obtained by direct air capture. Additionally, CO 2 capture and conversion steps are typically viewed as separate processes that optimize either capture and concentration or catalytic conversions of pure streams of CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

CO 2 Conversion to Butene via a Tandem Photovoltaic–Electrochemical/Photothermocatalytic Process: A Co-design Approach to Coupled Microenvironments

Here, we developed a tandem, unassisted, solar-driven electrochemical and photothermocatalytic process for the single-pass conversion of CO 2 to butene using only simulated solar irradiation as the energetic input. The two-step process involves electrochemical CO 2 reduction (CO 2 R) to ethylene followed by ethylene dimerization to butene. We assessed two unassisted electrochemical setups to concentrate ethylene in the CO 2 R reactor, achieving concentrations up to 5.4 vol.% with 1.8% average solar-to-ethylene conversion and 5.6% average CO 2 -to-ethylene single-pass conversion under 1-sun illumination. When passed through the photothermocatalytic ethylene oligomerization reactor, we generated 600 ppm of butene under 3-sun illumination. Through analysis of this process, we identified that the presence of H 2 , CO, and H 2 O leads to rapid deactivation of the Ni-based ethylene oligomerization catalyst.

14 SOLAR ENERGY↗