Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Chemical modification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

In situ visualisation of zeolite anisotropic framework flexibility during catalysis

Zeolites exhibit framework flexibility driving their chemical and catalytic properties. Since the zeolitic pores are extremely small, a slight strain generated in the crystal induces compelling changes in shape, connectivity, accessibility, and the framework chemical properties. These modifications affected the adsorption and desorption of reactants/products and the diffusion within the channels during reaction. Using in situ 3D Bragg coherent X-ray diffraction imaging, we unveil the dynamics of the zeolite structure during catalysis, contraction and/or expansion of its framework also known as zeolite framework flexibility. Here, we imaged three-dimensionally a single faujasite zeolite crystal during the ethanol dehydration reaction revealing anisotropic lattice dynamics simultaneously to guest molecules formation. Understanding zeolite flexibility could permit to tune zeolites properties towards potentially higher adsorption and selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Hard and semi-hard Fe-based magnetic materials

Iron (Fe) is the most important ferromagnetic element, not only for its high magnetic moment and high Curie temperature but for its abundance as well. Fe-based magnetic materials are therefore widely applied in technologies and industries, with most of the applications for soft magnetic materials, because of the low magnetocrystalline anisotropy (MCA) of Fe. However, it is possible to realize magnetic hardening in Fe-based materials as we have learned from the early carbon steel permanent magnets although their coercivity was modest. Recent efforts to search for rare-earth-free hard magnetic materials have shown more promising evidences for achieving high MCA in Fe-based materials. In this paper, we review the history and the recent developments of Fe-based hard and semi-hard magnetic materials with a focus on mechanisms of high MCA in Fe-based phases and the related crystal and electronic structures. Here, we have tabulated and discussed the structures and the magnetic properties of the Fe-based binary or ternary systems containing p-block and d-block elements, with many of them showing considerable MCA. Furthermore, it is important to know and to understand that the MCA in Fe-based magnetic materials can be tailored/enhanced through chemical and/or structural modifications that will lead to “artificially engineered” hard and semi-hard magnetic materials for advanced permanent magnets in the future.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Tunable Ion Transport with Freestanding Vermiculite Membranes

Membranes integrating two-dimensional (2D) materials have emerged as a category with unusual ion transport and potentially useful separation applications in both aqueous and nonaqueous systems. The interlayer galleries in these membranes drive separation and selectivity, with specific transport properties determined by the chemical and structural modifications within the inherently different interlayers. Here, in this work, we report an approach to tuning interlayer spacing with a single source material–exfoliated and restacked vermiculite with alkanediamine cross-linkers–to both control the gallery height and enhance the membrane stability. The as-prepared cross-linked 2D vermiculite membranes exhibit ion diffusivities tuned by the length of the selected diamine molecule. The 2D nanochannels in these stabilized vermiculite membranes enable a systematic study of confined ionic transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Low-chromophore lignin isolation from natural biomass with polyol-based deep eutectic solvents

When attempting to obtain light-color lignin from lignocellulosic biomass or industrial lignin, the available options based on chemical or morphological modification suffer from low yield, high cost, and lack of availability at the required scales. In this study, we adopted a polyhydric-alcohol-based deep eutectic solvent (PA-DES) to directly extract light-color lignin from natural biomass, which is even whiter than native cellulolytic enzyme lignin (CEL). The isolated lignin possessed a high recovery yield (97.36%), regular micro-spherical morphology, enriched β-ether linkage of 58/100Ar, low phenolic hydroxyl content of 1.25 mmol g -1 , minimal carbonyl content of 0.70 mmol g -1 , and less condensed structures, thus yielding a lower content of chromophores. Further, this lignin showed excellent sunscreen effects, which could enhance the SPF of a commercial sunscreen from 15 to 40 with only 5 wt% addition. This study can provide essential guidance for the scale-up production of light-color lignin and obtaining near-complete digestible cellulose for further saccharification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Vacancy complexes in Cd 3 As 2

Epitaxial growth of the three-dimensional topological semimetal Cd 3 As 2 on semiconductor substrates enables its use and integration in device applications. Epitaxy also provides an avenue for varying and controlling point defects through modification of the chemical potential during growth. In turn, knowledge of the point defects that are generated in Cd 3 As 2 epilayers will aid the interpretation of electron transport behavior and guide growth efforts to produce material with low defect densities. Point defects in Cd 3 As 2 epilayers grown by molecular beam epitaxy with varying As/Cd flux ratios are probed by positron annihilation spectroscopy. We find that lower As/Cd flux ratios produce higher concentrations of point defects. Remarkably, the measurements indicate that the average defect size is larger than a monovacancy. The data presented here contribute to an evolving picture of vacancy point defects in Cd 3 As 2 and can be used to direct future investigation of the defect-transport relationships in this emerging electronic material.

36 MATERIALS SCIENCE↗
DOE OSTI2025

In situ Gas Cell TEM Investigation of Nanoporous and Zeolite-based Nanocatalysts

A crucial application of in situ transmission electron microscopy is the understanding of nanocatalysts and the effect of the environment on their structure. Pre-treatments, such as calcination or annealing, can dramatically impact the catalytic properties by modifying the morphology and composition of nanostructures. Zeolites and nanoporous structures are particularly sensitive to reactive environments as the porosity or the chemical state can substantially change during the interaction with gases at elevated temperatures.[1] For instance, it has been shown that heating in air causes redispersion of sintered Cu clusters on zeolite, improving the catalytic properties.[2] These observations are possible though innovative in situ TEM gas holders, where the samples are enclosed into a small cell with SiNx windows, isolating the reactive environment from the rest of the column. [3] Here, we present in situ gas cell experiments of sensitive nanoporous structure and zeolite-based nanocatalysts. Scanning transmission electron microscopy (STEM) and electron energy-loss spectroscopy were used to understand migration of Al during calcination. In situ diagnostics also help distinguish Al as Bronsted sites, extra-framework Lewis sites, or bulk alumina. More broadly, in situ gas-heating TEM experiments are useful to determine chemical changes and modification of morphology of sensitive nanocatalysts upon pre-treatment (Figure 1).[4] Detailed in situ STEM and energy-dispersive X-ray spectroscopy (EDS) demonstrated compositional changes in nanoporous CuAlTi structures for hydrogen-deuterium exchange (H2-D2) reaction. Coarsening due to annealing at high temperature, a necessary steps for the preparation of catalysts, can be reversed by applying a redox cycle. Using the wide range of gases and temperature, the diagnostics are helpful to derive fundamental understanding of these catalysts at the atomic scale and also provide general guidelines to improve their design.

Foucher, Alexandre [ORNL] (ORCID:0000000150424002)↗
DOE OSTI2024

Factors influencing quantum evaporation of helium from polar semiconductors from first principles

While there is much indirect evidence for the existence of dark matter (DM), to date it has evaded detection. Current efforts focus on DM masses over ~GeV—to push the sensitivity of DM searches to lower masses, new DM targets and detection schemes are needed. In this work, we focus on the latter—a novel detection scheme recently proposed to detect 10–100 meV phonons in polar target materials. Previous work showed that well-motivated models of DM can interact with polar semiconductors to produce an athermal population of phonons. This new sensing scheme proposes that these phonons then facilitate quantum evaporation of 3 He from a van der Waals film deposited on the target material. However, a fundamental understanding of the underlying process is still unclear, with several uncertainties related to the precise rate of evaporation and how it can be controlled. In this work, we use ab initio density functional theory calculations to compare the adsorption energies of helium atoms on a polar target material, sodium iodide, to understand the underlying evaporation physics. We explore the role of surface termination, monolayer coverage, and elemental species on the rate of He evaporation from the target material. Using this, we discuss the optimal target features for He-evaporation experiments and their range of tunability through chemical and physical modifications such as applied field and surface termination.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Engineered Wood: Sustainable Technologies and Applications

Natural wood has been used for construction, fuel, and furniture for thousands of years because of its versatility, renewability, and aesthetic appeal. However, new opportunities for wood are arising as researchers have developed ways to tune the material's optical, thermal, mechanical, and ionic transport properties by chemically and physically modifying wood's naturally porous structure and chemical composition. Such modifications can be used to produce sustainable, functional materials for various emerging applications such as automobiles, construction, energy storage, and environmental remediation. In this review, we highlight recent advancements in engineered wood for sustainable technologies, including thermal and light management, environmental remediation, nanofluidics, batteries, and structural materials with high strength-to-weight ratios. Additionally, the current challenges, opportunities, and future of wood research are discussed, providing a guideline for the further development of next-generation, sustainable wood-based materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Advanced Anode for Internal Reforming and Thermal Management in Solid Oxide Fuel Cells

Solid oxide fuel cell (SOFC) is an efficient and clean electrical power generation system compared to conventional combustion based technologies with energy efficiency reaching as high as 85-90% in co-generation mode (electricity and heat). Other advantages of SOFCs are hybridization, modularity of construction, small CO 2 foot print per kWh of generated electricity and fuel flexibility. Hydrocarbons present in the gaseous fuel is utilized in SOFCs by internal or external reforming. There are two different internal reforming concepts: Direct Internal Reforming (DIR) and Indirect Internal Reforming (IIR). For DIR operation, the endothermic reforming reaction and the exothermic reaction from the oxidation reaction are operated together in the single unit eliminating the requirement for a separate fuel reformer. This configuration also simplifies the overall system design, making SOFC more attractive and efficient means of producing electrical power. The main advantage of the DIR type of operation is that the H 2 or CO consumption by the electrochemical reaction could directly promote the conversion of methane at the anode side of the fuel cell resulting in high conversion and high efficiency. The DIR operation, however, requires an anode material that has desired dual catalytic (hetero and electro) properties for reforming reaction and electrochemical reactions. The anode materials also need to remain resistant to carbon formation at the operating temperature and atmosphere with stable cell performance. Another requirement is to match the reforming reactions and electrochemical reactions to avoid local cooling or overheating, which can result in mechanical failure due to thermally induced stresses. Direct internal reforming (DIR) of hydrocarbon fuels simplifies the overall SOFC system design making it more attractive and efficient for producing electrical power. Low cost alloy anodes for distributed internal reforming of methane and other hydrocarbon fuels offer increased fuel-flexibility, reliability, and long term performance stability of solid oxide fuel cells (SOFC). The research program examined modification of the chemical compositions and microstructure of high entropy alloy (HEA) anode materials using thermochemical calculations and process simulation and modeling to achieve distributed reforming over the entire anode to eliminate hot zones. Cell fabrication and testing of the HEA anodes using button cell configuration has been performed to demonstrate the advantages of new anode over traditional Ni-YSZ anodes for distributed reforming and carbon free operation. Technical accomplishments include identification and synthesis of HEA carbon-resistant anode, demonstration of reduction in reforming rate confirmed by GC and modelling data validating effectiveness for thermal management in cell/stacks, electrochemical testing of HEA anode in single cell (HEA-GDC||YSZ||LSM-YSZ) and Characterization of pretest and posttest anode materials by TEM and SEM-EDS confirming carbon-free operation.

30 DIRECT ENERGY CONVERSION↗
NASA NTRS1975

A nonlinear model for gas chromatograph systems

Fundamental engineering design techniques and concepts were studied for the optimization of a gas chromatograph-mass spectrometer chemical analysis system suitable for use on an unmanned, Martian roving vehicle. Previously developed mathematical models of the gas chromatograph are found to be inadequate for predicting peak heights and spreading for some experimental conditions and chemical systems. A modification to the existing equilibrium adsorption model is required; the Langmuir isotherm replaces the linear isotherm. The numerical technique of Crank-Nicolson was studied for use with the linear isotherm to determine the utility of the method. Modifications are made to the method eliminate unnecessary calculations which result in an overall reduction of the computation time of about 42 percent. The Langmuir isotherm is considered which takes into account the composition-dependent effects on the thermodynamic parameter, mRo.

Feinberg, M. P.↗
NASA NTRS1984

Formation of ion damage tracks

A new model is proposed to explain both localized damage regions and preferential etching of damage tracks caused by the passage of energetic ions in insulators. The formation of each region of extended defects is initiated by the Auger decay of a vacancy produced in an inner electronic shell of an atom of the insulator by an incident ion. This decay produces an intense source of ionization within a small volume around the decaying atom, which causes decomposition of the material in a manner similar to that observed in pulsed laser irradiation. The resulting chemical or crystalline modification of the material is the latent track, which can be preferentially etched due to its changed structure.

Tombrello, T. A.↗
NASA NTRS1985

Silicon carbide-silicon nitride fibers: Preparation and characterization of polycarbosilazane precursors

This study examines the effect of modifications of the chemical structure of the monomers on the properties of the polymeric precursor and and ceramic fibers. A group of silaneamines, R'-Si (NH-R) sub 3, taken from the series where R' is methyl or phenyl and R is n-propyl, n-butyl, phenyl or allyl, are converted to polycarbosilazanes by heating in excess of 500 C. Resins obtained from this polymerization are characterized by NMR and IR spectroscopy and GPC. Each resin is tested for fiber-forming properties. Resin samples and fibers are hydrolytically cured. Thermogravimetric analyses are conducted on the cured resins to compare the relative thermal stability and examine the pyrolysis process. Cured fibers are tested for tensil strength.

Crouse, D. J.↗
NASA NTRS1995

Active Experiments in Space Plasmas; Symposium D4.1 of Commission D, COSPAR Scientific Assembly, 30th, Hamburg, Germany, July 11-21, 1994

Papers from the conference are presented and cover the following topics: ion and electron beams; ionospheric modification; spacecraft interactions; chemical releases; and plasma waves. Auroras and plasma emissions are reported from electron beam injection experiments on the EXCEDE 3 rocket and APEX satellite respectively. The important parameters affecting the charging of spacecraft during the operation of electron guns is covered. The Active Magnetospheric Particle Acceleration Satellite (AMPAS) mission utilizing dual-payload tethered satellites and both up and downward directed electron beams is proposed to study the magnetosphere. Recent results and associated theories from the Sura, Arecibo and Troms ionospheric heating facitlites are presented. The effects of neutral gases on spacecraft charging are examined in a series of rocket flights. Many results from the Combined Release and Radiation Effects Satellite chemical release experiments are presented.

Rietveld, M. T.↗
NASA NTRS1998

X-ray Diffraction Studies of the Structure and Thermochemistry of Alkaline-Earth Oxide-Coated Thermionic Cathodes

NASA LeRC has a broad, active cathode technology development program in which both experimental and theoretical studies are being employed to further development of thermionic cathodes for use as electron sources in vacuum devices for communications and other space applications. One important type of thermionic cathode under development is the alkaline-earth oxide-coated (BaO, SrO, CaO) cathode. Significant improvements in the emission characteristics of this cathode have been obtained through modification of the chemical composition and morphology of the oxide coating, with the best result thus far coming from the addition of In2O3 and Sc2O3. Whereas the In2O3 produces a finer, more uniform particle structure, the exact chemical state and role of the Sc2O3 in the emission enhancement is unknown. The purpose of this cooperative agreement is to combine the studies of the surface chemistry and electron emission at NASA LeRC of chemically modified oxide coatings with a study of the thermochemistry and crystal structure using X-ray diffraction equipment and expertise at Clark Atlanta University (CAU). The study at CAU is intended to provide the description and understanding of the structure and thermochemistry needed for further improvement and optimization of the modified coatings. A description of the experimental procedure, preliminary X-ray diffraction test results, together with the design of an ultrahigh vacuum chamber necessary for high temperature thermochemistry studies will be presented.

Karikari, E. K.↗
NASA NTRS1997

Measurements of Ice Nucleating Aerosols in the Upper Troposphere and Lower Stratosphere

Our major accomplishments during Year 1 were: Development of aerosol and crystal collection techniques. Development of single-particle chemical characterization techniques. Modification of system design for DC-8 and initial testing. Our major accomplishments during Year 2 were: Completion of system design and proof-of-concept experiments. Participation in SUCCESS mission. Reporting of theoretical and laboratory findings in the scientific literature. Reporting of initial SUCCESS results at scientific meetings. Our major accomplishments during Year 3 were: Data reduction and submission of all SUCCESS data to the archive. Participation in SUCCESS data comparison workshops. Reporting of SUCCESS results at the AEAP Meeting. Organization of CN counter intercomparison workshop. Preparation of three manuscripts submitted to the GRL SUCCESS Special Issue.

Kreidenweis, S. M.↗
NASA NTRS2006

Stability of Atmospheric-Pressure Plasma Induced Changes on Polycarbonate Surfaces

Polycarbonate films are subjected to plasma treatment in a number of applications such as improving adhesion between polycarbonate and silicon alloy in protective and optical coatings. The changes in surface chemistry due to plasma treatment have tendency to revert back. Thus stability of the plasma induced changes on polymer surfaces over desired time period is very important. The objective of this study was to examine the effect of ageing on atmospheric pressure helium-plasma treated polycarbonate (PC) sample as a function of treatment time. The ageing effects were studied over a period of 10 days. The samples were plasma treated for 0.5, 2, 5 and 10 minutes. Contact angle measurements were made to study surface energy changes. Modification of surface chemical structure was examined using, X-ray Photoelectron Spectroscopy (XPS). Contact angle measurements on untreated and plasma treated surfaces were made immediately, 24, 48, 72 and 96 hrs after treatment. Contact angle decreased from 93 deg for untreated sample to 30 deg for sample plasma treated for 10 minutes. After 10 days the contact angles for the 10 minute plasma treated sample increased to 67 deg, but it never reverted back to that of untreated surface. Similarly the O/C ratio increased from 0.136 for untreated sample to 0.321 for 10 minute plasma treated sample indication increase in surface energy.

Sharma, Rajesh↗
NASA NTRSDate not supplied

Unraveling Solar Wind Space Weathering of Carbon-Rich Asterods: Low-Flux VS. High-Flux Ion Irradiation of Murchison

Introduction: Space weathering processesalter the microstructural, compositional, and optical properties of airless planetary surfaces.Solar wind space weatheringforms ion-damaged rims within the outermost ~100 nm of regolith grains through atomic-displacements and implantation of energetic H+and He+ions[1]. Transmission electron microscope(TEM)studies of space weathered Itokawa and lunar olivine particles reveal predominantly nanocrystalline solar wind-damaged rims with only minor regions of amorphization[2-5]. This finding differs from laboratoryion irradiation experiments in which samples become amorphous at fluences 2-3 orders of magnitude lower than the independentlyconstrained fluences for still-crystalline natural samples [6-7].Ion flux is generally considered to have a secondaryeffectcompared to fluence in these irradiation experiments. However, solar wind irradiation of natural samples occurs at a flux that is ~4-5 orders of magnitude lower than whatisused inlaboratory simulations (e.g., [6,8-9]). Constraining how the very low ion flux of solar wind influences the microstructural, chemical, and spectral alteration of silicate minerals will improve our understanding of solar wind space weathering and aid in the analysis of returned samples from the Hayabusa2 and OSIRIS-REx missions. Here we report results from low-and high-flux ion irradiation experiments on the Murchison (CM2)meteoritewithcomparable total fluences. Methods: We performed low-flux and high-flux He+(4 keV) and H+(1 keV) irradiation experiments on separate, dry-cut Murchison slabs. Low-flux He+irradiation reached a total fluence of 2.1 x 1016ions/cm2(~400 years of exposure at Bennu) using a flux of 3.6 x 1011ions/cm2/s; low-flux H+irradiation reached a total fluence of 3.9 x 1016ions/cm2(~30 years) using a flux of 6.6 x 1011ions/cm2/s. High-flux He+irradiation reached a total fluence of 2.0 x 1016ions/cm2(~400 years)using a flux of 9.1 x 1012ions/cm2/s; high-flux H+irradiation reached a total fluence of 5.8 x 1016ions/cm2(~50 years)using flux of 8.4 x 1012ions/cm2/s. By irradiating to similar total fluences in both the low-flux and high-flux experiments, we can better isolate and evaluatethe effects of ion flux. Differences between unirradiatedand irradiated surfaces are determined using threeanalytical techniques:(1) in situX-ray photoelectron spectroscopy(XPS) reveals changes in surface chemistry,(2) visible to near-infrared spectroscopy (VNIR; 0.35-2.5 μm) highlights changes in spectraltrends, such as albedo and slope, and (3) TEM and energy-dispersive X-ray spectroscopy (EDS) identifieschanges in nanoscale structure and elemental composition within olivine and matrix electron-transparent thin sections prepared using focused ion beam scanning electron microscopy (FIB-SEM). Results and Discussion: XPS analyses of the low-fluxand high-fluxHe+-and H+-irradiated samples showa minorreduction in surface carbon contentand chemicalreduction ofFe3+to Fe2+. The latter result is consistent with the higher Fe2+/Fe3+ratios observed in phyllosilicate-rich space weathered rims of Ryugu grains [10].VNIR analyses suggest that the low-flux H+-irradiated spectrum has a slightly bluer slope (over 0.65-2.5 μm) compared to the unirradiated VNIR spectrum from [9] while the low-flux He+-irradiated spectral slope is comparable to the unirradiated surface. Both the high-flux He+-and H+-irradiated VNIR spectra exhibitslightlyhigheralbedos at shorter wavelengths relativeto their unirradiated counterparts, with He+irradiation yielding a greater change. Thus far, the low-flux He+-irradiated matrix and olivine FIBsections as well as the low-flux H+-irradiated olivine FIBsection have been examined with TEM. The surfaces of all three samplesshowless vesiculation than high-flux/high-fluenceirradiated matrix and olivine samples from [9]. The depth of phyllosilicate amorphization in thelow-fluxHe+-irradiated matrix FIBsection varieslaterally, with crystalline domains occurring as shallow as ~25 nm in some regions. Thelow-flux He+-irradiated olivine FIBsection has acontinuous,~40-90 nm thick ion-affected layer with polycrystalline and amorphous microstructures. The low-flux H+-irradiated olivine sampleexhibits a distinct, ~10-40 nm ion-affected layer whose uppermost ~20 nmin thicker regions is predominantly amorphous.Continuing to compare results from this work to those from [9] will provide a comprehensive understanding of how ion flux impacts the microstructural, chemical, and optical modification of various mineral phases and, in turn,help identify space weathering features from parent body alteration in Hayabusa2 and OSIRIS-REx returned samples.

D L Laczniak↗
DOE OSTI2020

Microbial electro-photosynthesis

Methods and apparatus for growing photosynthetic organisms lacking Photosystem II (PSII) function using externally supplied electrons shuttled into the organism using redox mediators to improve photosynthetic output and to produce and recover chemicals of interest. By removing PSII, all PAR photons are funneled toward Photosystem I, thereby significantly increasing the theoretical photon utilization efficiency for CO2 fixation, energy storage and the capacity to synthesize valuable chemicals. Additional genetic modification can be performed to insert or enhance specific metabolic pathways to generate products of commercial interest.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗