SEARCH · Engineering Papers

Results for “Charging Behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Fast Charge-Driven Li Plating on Anode and Structural Degradation of Cathode

Enabling fast charging in lithium ion batteries (LIBs) is a key factor to make electric vehicles drive just like gasoline-powered vehicles when the time comes to refuel. However, fast charging to current LIBs (LiNi x Mn y Co 1–z O 2 /graphite) is limited by lithium plating, which is barely reversible and causes LIBs to lose capacity over time. Thus, research to quantify the lithium plating in LIB cells is extremely important in improving our fundamental understanding of lithium plating behavior and enabling fast charging for LIBs. Here, we precisely quantified the amount of fast-charge-driven lithium plating in a coin-cell composed of LiNi 0.5 Mn 0.3 Co 0.2 O 2 (NMC532)/graphite. We found that the amount of lithium plating gradually increases with the cycle count and reaches 25.59 μmole (26.80 mAh g –1 cathode ) by the 100th cycle. The study also reveals that the NMC532 has lost 19% of its original lithium content after 100 fast-charging cycles; this, correspondingly, causes a lattice volumetric strain of 0.59%.

25 ENERGY STORAGE↗

DOE OSTI2020

Measurements of electron transport in liquid and gas Xenon using a laser-driven photocathode

Measurements of electron drift properties in liquid and gaseous xenon are reported. The electrons are generated by the photoelectric effect in a semitransparent gold photocathode driven in transmission mode with a pulsed ultraviolet laser. The charges drift and diffuse in a small chamber at various electric fields and a fixed drift distance of 2.0 cm. At an electric field of 0.5 kV/cm, the measured drift velocities and corresponding temperature coefficients respectively are 1.97 ± 0.04 mm/µs and (-0.69 ± 0.05)%/K for liquid xenon, and 1.42 ± 0.03 mm/µs and (+0.11 ± 0.01)%/K for gaseous xenon at 1.5 bar. In addition, we measure longitudinal diffusion coefficients of 25.7±4.6 cm2/s and 149±23 cm2/s, for liquid and gas, respectively. The quantum efficiency of the gold photocathode is studied at the photon energy of 4.73 eV in liquid and gaseous xenon, and vacuum. These charge transport properties and the behavior of photocathodes in a xenon environment are important in designing and calibrating future large scale noble liquid detectors.

Njoya, Oumarou↗

DOE OSTI2024

Electric Vehicle Charging Demand in the Chicago Metropolitan Area through 2030

This report outlines the collaborative efforts between Argonne National Laboratory and Exelon in advancing the Agent-Based Transportation Energy Analysis Model (ATEAM). Aligning with ComEd’s beneficial electrification plan, this study developed eight scenarios to access the temporal and spatial distribution of charging load and demand stemming from the widespread adoption of battery electric vehicles (BEV) adoption, augmented public charging infrastructure deployment, and increased multi-unit dwelling (MUD) charging availability. Enhancements to the ATEAM model encompassed the simulation of multiple days of travel behavior, estimation of total public charging infrastructure needs, user interface refinements, and output tracking at both vehicle and charging station levels. The total electricity consumption for residential and public charging to support over 800,000 BEVs in Chicago in 2029 is projected at approximately 10.2 GWh. Enhanced MUD home charging accessibility (70%) amplifies the home charging load in the study area by 1.5% compared to the baseline scenario (10%). The widespread adoption of BEVs reduces peak charging loads, owing to their inclusion across households with diverse income levels, thus fostering a more dispersed charging activity pattern. However, widespread BEV adoption increases the peak home charging load in areas with lower median household incomes, reflecting a higher BEV concentration in these locales and, subsequently, heightened peak charging demands. In the Widespread BEV adoption scenario, fewer census tracts exhibit elevated peak loads for combined home and public charging, indicating a more even distribution of charging demand across the study area. Predominantly, peak loads for combined charging—both home and public— occur between 2 p.m. and 10 p.m. across all scenarios, encompassing the majority of census tracts.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2024

Real-space visualization of atomic displacements in a long-wavelength charge density wave using cryogenic 4D-STEM

EuA⁢l 4 , a known skyrmion magnet, represents a class of materials that show complex electronic behaviors involving long-wavelength charge density wave (CDW). Here we realize direct real-space imaging of the concomitant periodic lattice distortion (PLD) with picometer precision in EuA⁢l 4 . Simultaneous imaging of microstructure, polarization, and interatomic distance is made possible using cryogenic four-dimensional scanning transmitting electron microscopy (cryo-4DSTEM). With this approach, we determined that the PLD in EuA⁢l 4 incorporates two out-of-phase atomic displacement modes on the Eu and Al sublattices. The PLD introduces periodic local symmetry fluctuations from the average symmetry of the bulk EuA⁢l 4 crystal. This critical local structural insight helps understanding of charge-spin-lattice couplings behind the intertwined quantum order in EuA⁢l 4 . Furthermore, our results also demonstrate cryo-4DSTEM as an indispensable approach for probing CDW and related quantum materials at low temperatures.

Ni, Haoyang↗

DOE OSTI2022

Negative string tension of a higher-charge Schwinger model via digital quantum simulation

We study some properties of generalized global symmetry for the charge- q Schwinger model in the Hamiltonian formalism, which is the (1 + 1)D quantum electrodynamics with a charge- q Dirac fermion. This model has the |$\mathbb {Z}_q\, 1$| -form symmetry, which is a remnant of the electric |$U(1)\, 1$| -form symmetry in the pure Maxwell theory. It is known that, if we put the theory on closed space, then the Hilbert space is decomposed into q distinct sectors, called universes, and some states with higher energy density do not decay to the ground state due to the selection rule of the 1-form symmetry. Even with open boundaries, we can observe the stability of such states by seeing a negative string tension behavior, meaning that opposite charges repel each other. In order to see negative string tensions, the vacuum angle θ has to be large enough and the standard path-integral Monte Carlo method suffers from the sign problem. We develop a method based on the adiabatic state preparation to see this feature with digital quantum simulation and confirm it using a classical simulator of quantum devices. In particular, we measure the local energy density and see how it jumps between the inside and outside of the insertion of the probe charges. We explicitly see that the energy density inside is lower than that outside. This is a clear signature of the negative string tension.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2024

Dephasing in Fluxonium Qubits from Coherent Quantum Phase Slips

Phase slips occur across all Josephson junctions (JJs) at a rate that increases with the impedance of the junction. In superconducting qubits composed of JJ-array superinductors—such as fluxonium—phase slips in the array can lead to decoherence. In particular, phase-slip processes at the individual array junctions can coherently interfere, each with an Aharonov-Casher phase that depends on the offset charges of the array islands. These coherent quantum phase slips (CQPS) perturbatively modify the qubit frequency, and therefore charge noise on the array islands will lead to dephasing. By varying the impedance of the array junctions, we design a set of fluxonium qubits in which the expected phase-slip rate within the JJ array changes by several orders of magnitude. We characterize the coherence times of these qubits and demonstrate that the scaling of CQPS-induced dephasing rates agrees with our theoretical model. Furthermore, we perform noise spectroscopy of two qubits in regimes dominated by either CQPS or flux noise. We find that the noise power spectrum associated with CQPS dephasing appears to be featureless at low frequencies and not 1 / f . Numerical simulations indicate that this behavior is consistent with charge noise generated by charge-parity fluctuations within the array. Our findings broadly inform JJ-array-design trade-offs, relevant for the numerous superconducting-qubit designs employing JJ-array superinductors. Published by the American Physical Society 2024

Physics↗

DOE OSTI2026

Intertwined charge, spin, and orbital degrees of freedom under electronic correlations in the one-dimensional Fe 3+ chalcogenide chain

Motivated by recent developments in the study of quasi-one-dimensional iron systems with Fe 2+ , we comprehensively study an Fe 3+ chalcogenide chain system. Based on first-principles calculations, the Fe 3+ chain has a similar electronic structure to that discussed before for the Fe 2+ chain, because of the similar Fe⁢𝑋 4 (𝑋 = S or Se) tetrahedron-chain geometry. Furthermore, a three-orbital electronic Hubbard model for this chain was constructed using the density matrix renormalization group method. A robust antiferromagnetic coupling was unveiled in the chain direction. In addition, in the intermediate electronic correlation 𝑈/𝑊 region, we found an interesting orbital-selective Mott phase with the coexistence of localized and itinerant electrons (𝑈 is the on-site Hubbard repulsion, while 𝑊 is the electronic bandwidth) based on the orbital-selective behavior observed in the charge fluctuations. Furthermore, we do not observe any obvious pairing tendency in the Fe 3+ chain in the electronic-correlation 𝑈/𝑊 region, where superconducting pairing tendencies were reported before in iron ladders. This suggests that superconductivity is unlikely to emerge in the Fe 3+ systems. Finally, our results clearly establish the similarities and differences between Fe 2+ and Fe 3+ iron chains, as well as iron ladders.

density matrix renormalization group↗

DOE OSTI2023

Magnetic Properties of Tetravalent Pu in the Perovskites BaPuO 3 and SrPuO 3

BaPuO 3 and SrPuO 3 were synthesized, and their structures were refined in the orthorhombic space group Pbnm , a common distortion from the classic $Pm\bar{3}$m over barm cubic perovskite. Magnetic-susceptibility measurements, obtained as a function of temperature over the range of 1.8-320 K, exhibit temperature-dependent behavior, with evidence of long-range magnetic order at temperatures higher than their lanthanide and actinide analogues: BaPuO 3 below 164(1) K and SrPuO 3 below 76(1) K. Effective moments of 1.66(10)μ B for BaPuO 3 and 1.84(8)μ B for SrPuO 3 were obtained by fitting their paramagnetic susceptibilities using the Curie-Weiss law. Further, both are below the free-ion value of 2.68 μ B expected for a Pu 4+ 5 $\mid$ 4 ground level. Ab initio wave function calculations, performed at the relativistic complete active space level including spin-orbit coupling and with an embedded cluster approach that neglects interactions between Pu centers, were used to generate embedded-cluster Pu 4+ magnetic susceptibilities. The calculations agree well with experimental data at higher temperatures, providing evidence that a single-ion representation is sufficient to account for the observed paramagnetic behavior without the need to invoke charge transfer, disproportionation, strong covalent bonding, or other more complex electronic behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Low-energy quasi-circular electron correlations with charge order wavelength in Bi 2 Sr 2 CaCu 2 O 8+δ

Most resonant inelastic x-ray scattering (RIXS) studies of dynamic charge order correlations in the cuprates have focused on the high-symmetry directions of the copper oxide plane. However, scattering along other in-plane directions should not be ignored as it may help understand, for example, the origin of charge order correlations or the isotropic scattering resulting in strange metal behavior. Our RIXS experiments reveal dynamic charge correlations over the qx-qy scattering plane in underdoped Bi 2 Sr 2 CaCu 2 O 8+δ . Tracking the softening of the RIXS-measured bond-stretching phonon, we show that these dynamic correlations exist at energies below approximately 70 meV and are centered around a quasi-circular manifold in the q x -q y scattering plane with radius equal to the magnitude of the charge order wave vector, q CO . This phonon-tracking procedure also allows us to rule out fluctuations of short-range directional charge order (i.e., centered around [q x = ±q CO , q y = 0] and [q x = 0, q y = ±q CO ]) as the origin of the observed correlations.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Solvent-Free Melt-Processed Cathode Mitigates Li Anode Instability in Polymer-Based Solid-State Batteries

Solvent-free manufacturing of battery components is a promising alternative to traditional slurry processing for reducing the cost and environmental impact. In this work, we used twin-screw melt extrusion to fabricate a polymer-based high voltage composite cathode. The melt-processed cathode is dense (near zero porosity) and thick (65 μm) and has high active material loading (80 wt %). The active particles are distributed uniformly throughout the melt-processed cathode, unlike the traditional slurry-cast cathode, which exhibits inhomogeneous particle distribution. In the melt-processed cathode, polymer and carbon form separate phases, whereas in the slurry-cast cathode they blend into a single phase. Due to these structural differences, the melt-processed cathode shows smooth charge–discharge profiles, while the slurry-cast cathode shows noisy charging and soft-shorting behavior. In conclusion, this work highlights that twin-screw extrusion as a scalable, solvent-free manufacturing method is advantageous in producing uniform cathodes, which mitigates anode instability.

25 ENERGY STORAGE↗

DOE OSTI2024

Efficient simulation of low-temperature physics in one-dimensional gapless systems

Here, we discuss the computational efficiency of the finite-temperature simulation with minimally entangled typical thermal states (METTS). To argue that METTS can be efficiently represented as matrix product states, we present an analytic upper bound for the average entanglement Rényi entropy of METTS for a Rényi index 0 < q ≤ 1. In particular, for one-dimensional (1D) gapless systems described by conformal field theories, the upper bound scales as O⁡(cN 0 ⁢log⁡β) where c is the central charge and N is the system size. Furthermore, we numerically find that the average Rényi entropy exhibits a universal behavior characterized by the central charge and is roughly given by half of the analytic upper bound. Based on these results, we show that METTS can provide a speedup compared to employing the purification method to analyze thermal equilibrium states at low temperatures in 1D gapless systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2023

Crystallographic Insight of Reduced Lattice Volume Expansion in Mesoporous Cu 2+ -Doped TiNb 2 O 7 Microspheres during Li + Insertion

TiNb 2 O 7 represents a promising anode material for lithium-ion batteries (LIBs), but its practical applications are currently hampered by the non-negligible volumetric expansion and contraction during the charge/discharge process and the sluggish ion/electron kinetics. Here a combination technique is reported by systematically optimizing the porous and spherical morphology, crystal structure, and surface decoration of mesoporous Cu 2+ -doped TiNb 2 O 7 microspheres to enhance the electrochemical Li + storage performance and stability simultaneously. The Cu 2+ dopants preferentially replace Ti 4+ in crystal lattices, which decreases the Li + diffusion barrier and increases the electronic conductivity, as confirmed by density functional theory (DFT) calculation and demonstrated by diverse electrochemical characterizations. The successful Cu 2+ doping significantly reduces the lattice expansion coefficient from 7.26% to 4.61% after Li + insertion along the b-axis of TiNb 2 O 7 , as visualized from in situ and ex situ XRD analysis. The optimal 5% Cu 2+ -doped TiNb 2 O 7 with surface coating of N-doped carbon exhibits significantly enhanced specific capacity and rate and cyclic performances in both half- and full-cell configurations, demonstrating an excellent electrochemical behavior for fast-charging LIB applications.

36 MATERIALS SCIENCE↗

DOE OSTI2023

When Is a Bond Broken? The Polarizability Perspective.

Abstract The question of when a chemical bond can be said to be broken is of fundamental chemical interest but has not been widely studied. Herein we propose that the maxima of static polarizability along bond dissociation coordinates naturally define cutoff points for bond rupture, as they represent the onset of localization of shared electron density into constituent fragments. Examples of computed polarizability maxima over the course of bond cleavage in main‐group and transition metal compounds are provided, across covalent, dative and charge‐shift bonds. The behavior along reaction paths is also considered. Overall, the static polarizability is found to be a sensitive reporter of electronic structure reorganization associated with bond stretching, and thus can serve as a metric for describing bond cleavage (or diagnose the absence of a chemical bond).

Hait, Diptarka↗

DOE OSTI2023

When Is a Bond Broken? The Polarizability Perspective.

Hait, Diptarka↗

DOE OSTI2024

Insights into the interaction of nitrobenzene and the Ag(111) surface: A DFT study

Here, this study explores the potential of nitrobenzene as an anolyte material for nonaqueous redox flow batteries (RFBs) by theoretically examining its low-coverage adsorption behavior on neutral and charged Ag(111) model electrode surfaces. At the low coverage limit, DFT calculations show a preference for nitrobenzene to adsorb parallel to the surface, with the benzene ring and nitro group centered over HCP sites. Interactions between nitrobenzene and the surface were analyzed using induced charge density analysis, Bader charge analysis, and projected density of states (PDOS). It was found that nitrobenzene adsorbs primarily through van der Waals interactions with the surface. As nitrobenzene accumulates negative charge, the strength of adsorption diminishes. Understanding the electrode-electrolyte interface is crucial for enhancing RFB electrochemical performance, and this study sheds light on nitrobenzene's interaction with a model Ag electrode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Molecular Dynamics Simulation Study of the Protonation State Dependence of Glutamic Acid Transport through a Cyclic Peptide Nanotube

The effect of the protonation state of glutamic acid on its translocation through cyclic peptide nanotubes (CPNs) was assessed by using molecular dynamics (MD) simulations. Anionic (GLU–), neutral zwitterionic (GLU0), and cationic (GLU+) forms of glutamic acid were selected as three different protonation states for an analysis of energetics and diffusivity for acid transport across a cyclic decapeptide nanotube. Based on the solubility-diffusion model, permeability coefficients for the three protonation states of the acid were calculated and compared with experimental results for CPN-mediated glutamate transport through CPNs. Potential of mean force (PMF) calculations reveal that, due to the cation-selective nature of the lumen of CPNs, GLU–, so-called glutamate, shows significantly high free energy barriers, while GLU+ displays deep energy wells and GLU0 has mild free energy barriers and wells inside the CPN. The considerable energy barriers for GLU– inside CPNs are mainly attributed to unfavorable interactions with DMPC bilayers and CPNs and are reduced by favorable interactions with channel water molecules through attractive electrostatic interactions and hydrogen bonding. Unlike the distinct PMF curves, position-dependent diffusion coefficient profiles exhibit comparable frictional behaviors regardless of the charge status of three protonation states due to similar confined environments imposed by the lumen of the CPN. The calculated permeability coefficients for the three protonation states clearly demonstrate that glutamic acid has a strong protonation state dependence for its transport through CPNs, as determined by the energetics rather than the diffusivity of the protonation state. In addition, the permeability coefficients also imply that GLU– is unlikely to pass through a CPN due to the high energy barriers inside the CPN, which is in disagreement with experimental measurements, where a considerable amount of glutamate permeating through the CPN was detected. To resolve the discrepancy between this work and the experimental observations, several possibilities are proposed, including a large concentration gradient of glutamate between the inside and outside of lipid vesicles and bilayers in the experiments, the glutamate activity difference between our MD simulations and experiments, an overestimation of energy barriers due to the artifacts imposed in MD simulations, and/or finally a transformation of the protonation state from GLU– to GLU0 to reduce the energy barriers. Altogether, our study demonstrates that the protonation state of glutamic acid has a strong effect on the transport of the acid and suggests a possible protonation state change for glutamate permeating through CPNs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Voltage and Temperature Limits of Advanced Electrolytes for Lithium-Metal Batteries

Several advanced electrolytes (mainly ether-based) have recently demonstrated excellent electrochemical performance in high energy density lithium (Li)-metal batteries. However, the safety of these ether-based electrolytes is still unknown. This work evaluates the thermal stability of these new formulations to understand their safety limits of operation in comparison to carbonate electrolytes typically used in Li-ion batteries. Electrolyte stability is assessed in conjunction with LiNi 0.8 Mn 0.1 Co 0.1 O 2 cathode and Li-metal anode at ultra-high voltages (≤ 4.8 V) and temperatures (≤ 300°C) to trigger thermal runaway, where onset and extent of heat release are monitored via isothermal microcalorimetry and differential scanning calorimetry Most ether-based electrolytes show improved thermal resilience over commercial carbonate formulations when heated up to 300°C. The thermal behavior in presence of charged cathode and Li-metal suggests that the new electrolytes may be better at stabilizing active material surfaces than carbonate electrolytes. Although extreme voltages severely destabilize the ether-based formulations, prompting thermal runaway, a phosphate based localized high concentration electrolyte exhibits superior stability over commercial carbonate electrolytes at all tested temperatures (32°C, 45°C, and 60°C). Although thermal analysis during the first charge process (as adopted in this preliminary study) may be insufficient to conclude the long-term advantages of these electrolytes, a more stable electrolyte identified under extreme voltage and temperature conditions will provide valuable guidance for the safety of future electrolyte designs.

25 ENERGY STORAGE↗

DOE OSTI2020

Covariant spectator theory of n p scattering: Deuteron form factors

The deuteron form factors are calculated using two model wave functions obtained from the 2007 CST high precision fits to $np$ scattering data. Included in the calculation are a new class of isoscalar $np$ interaction currents which are automatically generated by the nuclear force model used in these fits. If the nuclear model WJC2 is used, a precision fit ($\chi^2$/datum $\eqsim1$) to the Sick Global Analysis (GA) of all $ed$ elastic scattering data can be obtained by adjusting the unknown off-shell nucleon form factors $F_3(Q^2)$ (discussed before) and $F_4(Q^2)$ (introduced in this paper), and predicting the high $Q^2$ behavior of the neutron charge form factor $G_{En}(Q^2)$ well beyond the region where it has been measured directly. Relativistic corrections, isoscalar interaction currents, and off-shell effects are defined, discussed, and their size displayed. A rationale for extending $ed$ elastic scattering measurements to higher $Q^2$ is presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗