Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Catalyst synthesis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Ultra-Low Amounts of Transition Metals in Carbon-Based Catalysts Improve Their Alkaline OER Performance: A Systematic Study

The pursuit of green hydrogen production highlights a persistent gap in electrocatalyst research: while academic efforts prioritize cost-efficiency via activity enhancement, industrial viability demands greater emphasis on electrochemical stability. Carbon-based electrocatalysts, particularly those incorporating transition metals, have shown promise in alkaline oxygen evolution (OER) due to their high activity, cost-efficiency, and resource-efficiency. However, these catalysts suffer from insufficient stability under oxidizing conditions compared to pure transition metal catalysts due to erosion of the carbon support resulting from carbon corrosion, among other degradation mechanisms. In this systematic study, the influence of ultra-low amounts (<1 wt %) of iron, cobalt, nickel, and their most common combinations on the stability of a hydrothermally derived, N-doped carbon support and the overall catalyst performance during alkaline OER is systematically explored. By identifying critical stability descriptors and correlating them with synthesis conditions and catalyst properties, primary and secondary corrosion pathways are unraveled. Subsequently, through careful adjustment of carbonization temperature and composition of incorporated transition metals, overall catalyst corrosion can be suppressed immensely. Especially, the inclusion of Ni and Fe is paramount for the formation of stable catalyst materials under laboratory conditions (10 mA/cm 2 in 0.1 M KOH), which is surprisingly unconstrained by the degree of graphitization of the carbon support. Mixing this electrochemically stable material with a graphitic carbon powder results in an excellent stability of over 400 h at 100 mA/cm 2 in 1 M KOH, implying great potential for the future improvement of carbon-based electrodes under oxidizing conditions toward industrial application.

N-doped carbon↗
DOE OSTI2021

Design of a bifunctional TEMPO-tertiary amine mesoporous silica catalyst for the three-step cascade synthesis of a chromene derivative

A key challenge is design of materials and processes whereby competing reagents or conditions do not harm the multi-step sequence, thus allowing for more efficient chemical synthesis with elimination of work-up and separation steps. In this work, a three-step reaction cascade is performed using a porous bifunctional dimethylpropylamine-TEMPO-MCM41 catalyst, converting the commodity chemicals benzyl alcohol, sodium hypochlorite, and malononitrile to a biologically active anti-cancer, and anti-malarial 2-amino-chromene derivative. The cascade first utilizes a TEMPO-catalyzed oxidation of benzyl alcohol to benzaldehyde with NaOCl as the terminal oxidant. This is followed by a two-step, dual base catalyzed Knoevenagel condensation with malononitrile followed by a Michael addition with lawsone. Optimal conditions converting benzyl alcohol to 2-amino-5,10-dioxo-4-phenyl-5,10-dihydro-4H-benzo[g]chromene-3-carbonitrile include the delayed addition of malononitrile and lawsone during the three-step reaction sequence, which results in a 2-amino-chromene yield of over 80%. The importance of stepwise reagent addition is rationalized due to the unfavorable adsorption of acidic lawsone on the surface-grafted base catalyst. Tertiary Brønsted base sites of dimethylpropylamine outperform the more Lewis basic primary propylamine functionalized catalyst. This work outlines a simple and effective method for generating mesoporous materials with two types of active sites via co-condensation and thiol-ene coupling procedures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Electrochemical ammonia synthesis via nitrate reduction on Fe single atom catalyst

Electrochemically converting nitrate, a widespread water pollutant, back to valuable ammonia is a green and delocalized route for ammonia synthesis, and can be an appealing and supplementary alternative to the Haber-Bosch process. However, as there are other nitrate reduction pathways present, selectively guiding the reaction pathway towards ammonia is currently challenged by the lack of efficient catalysts. Here we report a selective and active nitrate reduction to ammonia on Fe single atom catalyst, with a maximal ammonia Faradaic efficiency of ~ 75% and a yield rate of up to ~ 20,000 μg h –1 mg cat. –1 (0.46 mmol h –1 cm –2 ). Our Fe single atom catalyst can effectively prevent the N-N coupling step required for N 2 due to the lack of neighboring metal sites, promoting ammonia product selectivity. Density functional theory calculations reveal the reaction mechanisms and the potential limiting steps for nitrate reduction on atomically dispersed Fe sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Elucidating the Impact of Cis – Trans Organic Structure Directing Agent Isomer Ratios on the Aluminum Distribution Within SSZ-39

Despite their widespread use, the mechanisms governing the synthesis of zeolite catalysts are still poorly understood. A notable example of this problem is the uncertainty surrounding the influence of synthesis conditions on the placement of Al atoms in the zeolite framework which determines the active sites available for catalytic species. In this work, the role of the cis to trans isomer ratio of the OSDA N,N-dimethyl-3-5-dimethylpiperidinium on the energetics of 26 distinct Al pair distributions in SSZ-39 is examined both in the presence and absence of Na using density functional theory calculations. The initial orientation of the OSDA was found to have a significant impact on the final energies present, necessitating the screening of a large number of initial orientations with force field calculations and single point DFT calculations. Ground state energies were found to vary significantly with the ratio of cis to trans OSDAs with a Boltzmann distribution revealing the most likely Al pair distributions shift from sharing the same 8 membered rings to sharing the same double six membered rings to having no shared subunits as one increases the amount of cis OSDA present within the framework. The presence of Na was found to favor Al pair distributions where both Als occupied the same 6-membered ring. When an implicit solvent model was used to evaluate ground state energies the ideal Na sites shifted from 6-membered rings to empty SSZ-39 cages while OSDA positions and orientations remained largely the same. To provide insight on how kinetic factors may influence Al distributions, formation energies we calculated for connected double six membered rings. Further, these formation energies revealed a preference for Al pairs to occupy the same 4-membered ring which indicates kinetic and thermodynamic control may lead to different Al distributions in SSZ-39.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A Full Spectrum of Characterization for Insight into Carbon Speciation and Removal on a Cu/BEA Catalyst During Renewable High-Octane Hydrocarbon Synthesis

Conversion of methanol and dimethyl ether to high-octane gasoline catalyzed by beta zeolite (BEA) provides an opportunity for the production of high-quality fuels from renewable carbon sources (e.g., gasified biomass). Recent research demonstrated that a Cu-modified BEA zeolite catalyst (Cu/BEA) offered advantages over the unmodified BEA catalyst due to multifunctional Cu species that enabled incorporation of co-fed H2, reactivation of light alkanes, and reduction of products from the aromatic hydrocarbon pool. The shift in hydrocarbon pool chemistry has the potential to influence the identity and relative composition of surface carbon species that are often linked to deactivation. A detailed understanding of these carbon species is important to develop an effective and efficient regeneration procedure that can enable the transition from fundamental catalyst development to commercial application. Here, we applied complementary ex situ and in situ characterization techniques to compare the structures of surface carbon species on post-reaction Cu/BEA and unmodified BEA catalysts. Both catalysts contained acyclic and aromatic hydrocarbons along with graphitic carbon species. However, the post-reaction Cu/BEA catalyst had a lower polycyclic aromatic content, and further, the graphitic species were more hydrogenated and defective. It was also found that the presence of Cu promoted carbon removal at lower temperatures than for unmodified BEA through activation of O2 by Cu during thermal oxidation. The fundamental insight into the composition of surface carbon species enabled the design of an effective and efficient regeneration strategy for the DME homologation reaction over Cu/BEA, resulting in full recovery of the catalyst activity.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Synthesis of End-Functionalized Poly(norbornenes) and Poly(ethylidene norbornenes) Using a Pd(II) Catalyst in Combination with Chain Transfer Agents

Synthesis of end-functionalized poly(norbornene)s (PNBs) and poly(ethylidenenorbornene)s (PENBs) were prepared using the palladium catalyst t Bu 3 PPdMeCl/NaBAr f in combination with chain transfer agents (CTAs) 4-penten-1-ol and 10-undecenal. These CTAs produce polymers end-capped with -OH and -CHO groups, respectively, in high yields with M n values in the range of 6K to 17K, depending on the molar ratio of the CTA: monomer. End-functionalized PNBs and PENBs with precisely controlled Mn values and very narrow molecular weight distributions were accessed by using 4-penten-1-ol and 10-undecenal as chain-terminating agents following living polymerizations in which monomer is completely consumed. The utility of the aldehyde-functionalized polymers is illustrated via coupling to a dye molecule and by synthesis of ambiphilic diblock copolymers, PNB-b-PEG and PENB-b-PEG.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Spectroscopic insight into carbon speciation and removal on a Cu/BEA catalyst during renewable high-octane hydrocarbon synthesis

Conversion of methanol and dimethyl ether (DME) to high-octane gasoline catalyzed by beta zeolite (BEA) provides an opportunity for the production of high-quality fuels from renewable carbon sources (e.g., gasified biomass). Recent research demonstrated that a Cu-modified BEA zeolite catalyst (Cu/BEA) offered advantages over the unmodified BEA catalyst due to multifunctional Cu species that enabled incorporation of co-fed H2, reactivation of light alkanes, and reduction of products from the aromatic hydrocarbon pool. The shift in hydrocarbon pool chemistry has the potential to influence the identity and relative composition of surface carbon species that are often linked to deactivation. A detailed understanding of these carbon species is important to develop an effective and efficient regeneration procedure that can enable the transition from fundamental catalyst development to commercial application. Here, we applied complementary ex situ and in situ characterization techniques to compare the structures of surface carbon species on post-reaction Cu/BEA and unmodified BEA catalysts. Both catalysts contained acyclic and aromatic hydrocarbons along with graphitic carbon species. However, the post-reaction Cu/BEA catalyst had a lower polycyclic aromatic content, and further, the graphitic species were more hydrogenated and defective. It was also found that the presence of Cu promoted carbon removal at lower temperatures than for unmodified BEA through activation of O2 by Cu oxide during thermal oxidation. The fundamental insight into the composition of surface carbon species enabled the design of an effective and efficient regeneration strategy for the DME homologation reaction over Cu/BEA, resulting in full recovery of the catalyst activity.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
NASA NTRS2016

Synthesis and Characterization of Cobalt Containing Nanoparticles on Alumina A Potential Catalyst for Gas to Liquid Fuels Production

Fisher-Tröpsch synthesis (FTS) is a century-old gas-to-liquid (GTL) technology that commonly employs cobalt (Co, on an oxide support) or iron (supported or not) species catalysts. It has been well established that the activity of the Co catalyst depends directly upon the number of surface Co atoms. The addition of promoter (mainly noble) metals has been widely utilized to increase the fraction of Co that is available for surface catalysis. Direct synthesis of Co nanoparticles is a possible alternative approach; our preliminary synthesis and characterization efforts are described. Materials were characterized by various transmission microscopies and energy dispersive spectroscopy. Tri-n-octylphosphine oxide (TOPO) and dicobalt octacarbonyl were heated under argon to a temperature of 180 deg with constant stirring for 1 hr. Quenching the reaction in toluene produced Co-containing nanoparticles with a diameter of 5 to 10 nm. Alternatively, an alumina support (SBA-200 Al2O3) was added; the reaction was further stirred and the temperature was decreased to 140 deg to reduce the rate of further growth/ripening of the nucleated Co nanoparticles. A typical size of Co-containing NPs was also found to be in the range of 5 to 10 nm. This can be contrasted with a range of 50 to 200 nm for conventionally-produced Co-Al2O3 Fischer-Tröpsch catalysts. This method shows great potential for production of highly dispersed catalysts that are either supported or unsupported.

aluminum oxides↗
DOE OSTI2023

Synthesis and Structural Study of Substituted Ternary Nitrides for Ammonia Production

Over the past few decades, inorganic nitride materials have grown in importance in part due to their potential as catalysts for the synthesis of NH 3 , a key ingredient in fertilizer and precursor to industrial chemicals. Of particular interest are the ternary (ABN) or higher-order nitrides with high metal-to-nitrogen ratios that show promise in enhancing NH 3 synthesis reaction rates and yields via heterogeneous catalysis or chemical looping. Although metal nitrides are predicted to be numerous, the stability of nitrogen triple bonds found in N 2 , especially in comparison to the metal–nitrogen bonds, has considerably hindered synthetic efforts to produce complex nitride compounds. In this study, we present an exhaustive down-selection process to identify ternary nitrides for a promising chemical looping NH 3 production mechanism. We also report on a facile and efficient two-step synthesis method that can produce well-characterized η-carbide Co 3 Mo 3 N/Fe 3 Mo 3 N or filled β-manganese Ni 2 Mo 3 N ternaries, as well as their associated quaternary, (Co,Fe) 3 Mo 3 N, (Fe,Ni) 2 Mo 3 N, and (Co,Ni) 2 Mo 3 N, solid solutions. To further explore the quaternary space, syntheses of (Co,Ni) 3 Mo 3 N (Ni ≤ 10 mol %) and Co 3 (Mo,W) 3 N (W ≤ 10 mol %) were also investigated. The structures of the nitrides were characterized via X-ray powder diffraction. The morphology and compositions were characterized with scanning electron microscopy. In conclusion, the multitude of chemically unique, but structurally related, nitrides suggests that properties such as nitrogen activity may be tunable, making the materials of great interest for NH 3 synthesis schemes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Atomic Layer Deposition of Cu Electrocatalysts on Gas Diffusion Electrodes for CO 2 Reduction

Electrochemical reduction of CO 2 using Cu catalysts enables the synthesis of C 2+ products including C 2 H 4 and C 2 H 5 OH. Here, in this study, Cu catalysts were fabricated using plasma-enhanced atomic layer deposition (PEALD), achieving conformal deposition of catalysts throughout 3-D gas diffusion electrode (GDE) substrates while maintaining tunable control of Cu nanoparticle size and areal loading. The electrochemical CO 2 reduction at the Cu surface yielded a total Faradaic efficiency (FE) > 75% for C 2+ products. Parasitic hydrogen evolution was minimized to a FE of ~10%, and a selectivity of 42.2% FE for C 2 H 4 was demonstrated. Compared to a line-of-sight physical vapor deposition method, PEALD Cu catalysts show significant suppression of C 1 products compared to C 2+ , which is associated with improved control of catalyst morphology and conformality within the porous GDE substrate. Finally, PEALD Cu catalysts demonstrated a stable performance for 15 h with minimal reduction in the C 2 H 4 production rate.

42 ENGINEERING↗
DOE OSTI2022

Direct synthesis of branched hydrocarbons from CO 2 over composite catalysts in a single reactor

The thermocatalytic hydrogenation of CO 2 to hydrocarbons using a composite catalyst system in a single reactor under mild reaction conditions was investigated, by combining methanol synthesis, methanol dehydration and dimethyl ether homologation catalysts. High selectivity to isoparaffins, which are versatile precursors to sustainable aviation fuels, was achieved. The use of Cu/BEA significantly improved both the conversion of oxygenates and the hydrocarbon yield compared to HBEA by facilitating H-incorporation in the C-chain growth during the homologation reaction. A study of catalyst composition and reaction conditions revealed that nearly complete conversion of oxygenates was achieved using a stacked-bed configuration, providing high C-selectivity to C 4+ hydrocarbons (34.1% among all products and 95.5% in products excluding CO). The ability to completely convert oxygenates to hydrocarbons and achieve high CO-free selectivity to desired hydrocarbon products is unprecedented in CO 2 -to-hydrocarbon reports, and advantageous for downstream separation, as CO can be easily separated and recycled to improve overall hydrocarbon production in an integrated process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Atomically Dispersed Single Ni Site Catalysts for Nitrogen Reduction toward Electrochemical Ammonia Synthesis Using N 2 and H 2 O

Ammonia (NH 3 ) electrosynthesis gains significant attention as NH 3 is essentially important for fertilizer production and fuel utilization. However, electrochemical nitrogen reduction reaction (NRR) remains a great challenge because of low activity and poor selectivity. Herein, a new class of atomically dispersed Ni site electrocatalyst is reported, which exhibits the optimal NH 3 yield of 115 µg cm -2 h -1 at –0.8 V versus reversible hydrogen electrode (RHE) under neutral conditions. High faradic efficiency of 21 ± 1.9% is achieved at -0.2 V versus RHE under alkaline conditions, although the ammonia yield is lower. The Ni sites are stabilized with nitrogen, which is verified by advanced X-ray absorption spectroscopy and electron microscopy. Density functional theory calculations provide insightful understanding on the possible structure of active sites, relevant reaction pathways, and confirm that the Ni-N 3 sites are responsible for the experimentally observed activity and selectivity. Extensive controls strongly suggest that the atomically dispersed NiN 3 site-rich catalyst provides more intrinsically active sites than those in N-doped carbon, instead of possible environmental contamination. Overall, this work further indicates that single-metal site catalysts with optimal nitrogen coordination is very promising for NRR and indeed improves the scaling relationship of transition metals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

In Situ Studies of the Formation of MoP Catalysts and Their Structure under Reaction Conditions for Higher Alcohol Synthesis: The Role of Promoters and Mesoporous Supports

Three formulations of a molybdenum phosphide (MoP) catalyst system were characterized for the higher alcohol synthesis (HAS) reaction using in situ X-ray absorption spectroscopy (XAS) and X-ray diffraction (XRD), monitoring the chemical phase evolution during activation and under reaction conditions. Here, the in situ study herein provides important insights into the effect of the support and of K that lead to high performance in HAS for K-promoted MoP supported on carbon, as evidenced by previous studies (ethanol selectivity: 29%; conversion: 5%). During the activation process, XAS shows that the carbon-supported samples reduce and reach a highly crystalline state at a lower temperature than the SBA-15-supported sample, indicating a substantial difference in catalyst activation. After activation, the samples are introduced to relevant reaction conditions resulting in spectra fairly similar to one another. XRD results corroborate the difference in the degree of crystallinity of these samples, in alignment with the XAS, and reveal the formation of crystalline potassium pyrophosphate (K 4 P 2 O 7 ) during the activation period of the K-promoted samples. This K 4 P 2 O 7 phase remains present under reaction conditions. Taken together, these results provide insights into the roles played by the carbon support and K promotion, connecting activity to electronic and crystal structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A general strategy for preparing pyrrolic-N 4 type single-atom catalysts via pre-located isolated atoms

Single-atom catalysts (SACs) have been applied in many fields due to their superior catalytic performance. Because of the unique properties of the single-atom-site, using the single atoms as catalysts to synthesize SACs is promising. In this work, we have successfully achieved Co 1 SAC using Pt 1 atoms as catalysts. More importantly, this synthesis strategy can be extended to achieve Fe and Ni SACs as well. X-ray absorption spectroscopy (XAS) results demonstrate that the achieved Fe, Co, and Ni SACs are in a M1-pyrrolic N 4 (M= Fe, Co, and Ni) structure. Density functional theory (DFT) studies show that the Co(Cp) 2 dissociation is enhanced by Pt 1 atoms, thus leading to the formation of Co 1 atoms instead of nanoparticles. These SACs are also evaluated under hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), and the nature of active sites under HER are unveiled by the operando XAS studies. These new findings extend the application fields of SACs to catalytic fabrication methodology, which is promising for the rational design of advanced SACs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Precision Structure Engineering of High-Entropy Oxides under Ambient Conditions

High-entropy oxides (HEOs) have unveiled a unique frontier in the realm of heterogeneous catalysis, taking advantage of the entropic effect and increased complexities to deliver ultrahigh stability and large tuning capability. However, current HEO synthesis mainly relies on high-temperature annealing approaches affording HEOs possessing no or low surface area, inferior active site exposure efficiency, and low controllability over the structure tuning. The grand challenge lies in producing high-quality HEO catalysts with high active site utilization efficiency, which relies on precision structure engineering, preferably under mild conditions. In this work, an in situ lattice engineering approach was developed to afford a supported HEO catalyst under ambient conditions. The HEO compositions (CuCoFeNiMnO x ) were uniformly integrated into the lattice of CeO 2 driven by cavitation-induced nucleation being generated via ultrasonication. The as-afforded catalysts were featured by high surface area, atomically dispersed HEO compositions, active redox properties, abundant oxygen vacancies (O V ), antiagglomeration, and high phase stability under harsh conditions. Compared with the ex situ introduction of HEO on the surface, the in situ method provides dual benefits to maintain the dispersity of HEO via entropic and lattice confinement effects. Engineering the complex HEO within the lattice of fluorite-structured CeO 2 also yields abundant defects (e.g., O V ) and active metal sites with strong reducing properties (e.g., Ce 3+ and Cu + ), which greatly improves the activity of the lattice oxygen and tunability of the adsorption behavior of the guest molecules, especially in the presence of impurities (e.g., water and propane). The catalytic performance of the supported HEO catalyst in oxidative procedures surpasses the pure dense phase HEO as well as the ex situ-generated catalysts. Further, the synthesis approach being developed in this work, together with the fundamental understanding in structure evolution and reaction mechanism, showcases a facile pathway under ambient conditions to generate stable catalysts capable of maintaining structural robustness in high-temperature conditions while delivering enhanced catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Supported-Single Nickel Atom Catalysts for the Methanation of Carbon Dioxide

Synthesis of twenty-seven bimetallic catalysts consisting of nickel and one of nine different dopants (B, Co, Cu, Fe, Mg, Mn, Sn, V, and Zn) supported on three different metal oxides (Al 2 O 3 , CeO 2 , and SiO 2 ) is carried out via organometallic grafting. The catalysts are evaluated for their activity and selectivity for the CO 2 methanation reaction at a feed ratio of H 2 /CO 2 of 4 at 300 °C in a high-throughput flow reactor system. After in situ pre-activation (500 °C in H 2 ), Ni/Co/CeO 2 exhibited high conversion (84.3%) and selectivity for methane (99.6%). Ni/Co/CeO 2 was characterized by high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction, H 2 -temperature-programmed reduction (H 2 -TPR), and CO 2 -temperature-programmed desorption (CO 2 -TPD). HRTEM showed the presence of single Ni and Co atoms on ceria after pre-reduction at 500 °C and after the methanation reaction at 300 °C for 15 h. XPS determined that the strong interaction between Ni, Co, and ceria increased after the reduction, leading to a charge transfer between Ni and Ce that created oxygen vacancies in ceria. Nickel was found to be Ni 2+ in the as-prepared material and was partially reduced in the presence of cobalt and after the activation in H 2 at 500 °C. The DFT results show that both nickel and cerium exhibit lower Bader charges in the Ni/Co/CeO 2 system, confirming that the presence of cobalt enhances the reduction of both Ni and Ce through electronic interactions. This indicates that single cationic Ni atoms are highly effective for the methanation reaction. In conclusion, the organometallic grafting technique is found to be efficient for synthesizing catalysts with highly homogeneous dispersed species at low metal loadings (0.16 wt % Ni–0.15 wt % Co), which leads to high turnover frequency (up to 248.7 h –1 ) and durability for methanation.

CO2 conversion↗