Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CIGS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Spray Deposition of High Quality CuInSe2 and CdTe Films: Preprint

A number of different ink and deposition approaches have been used for the deposition of CuInSe2 (CIS), Cu(In,Ga)Se2 (CIGS), and CdTe films. For CIS and CIGS, soluble precursors containing Cu, In, and Ga have been developed and used in two ways to produce CIS films. In the first, In-containing precursor films were sprayed on Mo-coated glass substrates and converted by rapid thermal processing (RTP) to In2Se3. Then a Cu-containing film was sprayed down on top of the In2Se3 and the stacked films were again thermally processed to give CIS. In the second approach, the Cu-, In-, and Ga-containing inks were combined in the proper ratio to produce a mixed Cu-In-Ga ink that was sprayed on substrates and thermally processed to give CIGS films directly. For CdTe deposition, ink consisting of CdTe nanoparticles dispersed in methanol was prepared and used to spray precursor films. Annealing these precursor films in the presence of CdCl2 produced large-grained CdTe films. The films were characterized by x-ray diffraction (XRD) and scanning electron microscopy (SEM). Optimized spray and processing conditions are crucial to obtain dense, crystalline films.

14 SOLAR ENERGY↗

A thermodynamic evaluation of metal halides for the recrystallization of Cu(In,Ga)Se 2

CdTe films are deposited at low temperatures and recrystallized to photovoltaic device quality using CdCl 2 treatments, leading to competitive manufacturing costs. Cu(In,Ga)Se 2 (CIGS) typically requires high-temperature, low-rate depositions to produce high-efficiency devices, resulting in higher costs. A similar metal halide treatment of CIGS has been demonstrated by us previously for some metal halide sources. To understand and optimize the process, a thermodynamic evaluation of candidate metal halides for such treatments is presented as a guide for their selection. By comparing bond dissociation energies, mono- and di-halide compounds are proposed to be ideal compounds to act as transport agents. Known recrystallization and temperature reduction benefits by Ag alloying suggests that Ag-halides should be used to aid transport of all species. The high vapor pressure and mobility of Ga compounds still poses a problem for metal halide treatment resulting in Ga etching and removal of intentional Ga gradients. Less severe but similar issues with In compounds may occur. As a result, Cu compounds have low vapor pressures which may limit transport, however, Cu is highly mobile in CIGS and recrystallization still occurs.

14 SOLAR ENERGY↗

Effect of rapid thermal annealing of copper indium aluminium gallium diselenide solar cell devices and its deposition challenges

Thin-film photovoltaic research based on ternary or quaternary absorber materials has mainly concentrated on copper (indium/gallium) diselenide, CuIn x Ga 1-x Se 2 (CIGS). This material has demonstrated exceptional energy conversion efficiencies. By altering the In/Ga ratio the band gap can be varied from 1.02 eV (for CuInSe 2 ) to 1.68 eV (for CuGaSe 2 ). However, research from leading groups showed that cells have maximum efficiency at or below 1.35 eV. This paper reports the challenges of using aluminium alloyed CIGS deposited with a single step co-evaporation method. Adding aluminium is found to reduce the bulk trap state density for wide gap devices. However, it created significant safety issues when compared to conventional CIGS co-evaporation deposition systems. The release of H 2 Se when moisture comes in contact with aluminium selenide was resolved by placing exhaust lines at various places of the deposition chamber. A single phase CIAGS device with a bandgap of 1.30 eV was prepared using a co-evaporation method. The fabricated solar cell devices with CIAGS absorber layers and resulted in a photoconversion efficiency of 10.3%. A progressive rapid thermal annealing at various temperature resulted in a 10% increase in the overall efficiency at 300 °C. The efficiencies were reduced when the RTA temperature increased above 300 °C.

14 SOLAR ENERGY↗

Power system inertia estimation: Review of methods and the impacts of converter-interfaced generations

Understanding and quantifying the inertia of power systems with the integration of converter-interfaced generation (CIG) plays an essential role in the safe transition to a future low-inertia scenario. Here we provide a comprehensive summary of inertia definitions for both synchronous generators and CIGs as well as their corresponding estimation methods. In particular, the estimation methods are categorized as model-based and measurement-based approaches considering both small and large disturbances. The advantages and disadvantages of different methods are carefully discussed. This paper also offers for the first time a framework to quantify the virtual inertia of CIGs at the component and aggregation levels, an open problem in the literature. Finally, future directions for inertia estimation are identified and discussed. This significantly benefits the design of appropriate control and protection schemes in achieving a more reliable, secure, and resilient power system.

42 ENGINEERING↗

Effect of indium concentration on electrochemical properties of electrode-electrolyte interface of CuIn{sub 1-x}Ga{sub x}Se{sub 2} prepared by electrodeposition

Highlights: • CIGS thin film was electrodeposited on a molybdenum (Mo) electrode from a non-pH buffered chloride-based electrolyte. • The electrodeposited time and the concentration of In{sup 3+} control the growth of CIGS thin film prepared in this electrodeposition system. • The kinetic of electrodeposition system was gradually dominated by the diffusion process with the electrodeposition time. - Abstract: In this study, the electrochemical impedance spectroscopy (EIS) technique was used to investigate the electrochemical behavior of the interface between the Mo electrode and the Cu-In-Ga-Se electrolyte. In this electrodeposition system, the main parameters include (1) various deposition times, and (2) the effect of In{sup 3+} concentration on the diffusion processes, electrical double layer, charge transfer resistance, and Warburg impedance. Experimental results revealed that the electrochemical kinetic behavior of CIGS thin film is strongly influenced by (1) the electrical double layer existing between the substrate, and (2) the electrolyte with different concentrations of In{sup 3+}. With an increase in the electrodeposition time, the kinetic behavior of this electrodeposition system was gradually dominated by the diffusion process rather than charge transfer process.

36 MATERIALS SCIENCE↗

Enhanced electrical properties of pulsed laser-deposited CuIn{sub 0.7}Ga{sub 0.3}Se{sub 2} thin films via processing control

Polycrystalline CuIn{sub 0.7}Ga{sub 0.3}Se{sub 2} thin films were prepared on soda-lime glass substrates using pulsed laser deposition (PLD) with various process parameters such as laser energy, repetition rate and substrate temperature. It was confirmed that there existed a limited laser energy, i.e. less than 300 mJ, to get phase pure CIGS thin films at room temperature. Particularly, even at room temperature, distinct crystalline CIGS phase was observed in the films. Crystallinity of the films improved with increasing substrate temperature as evidenced by the decrease of FWHM from 0.65 degto 0.54 deg. Slightly Cu-rich surface with Cu{sub 2-x}Se phase was confirmed to exist by Raman spectra, depending on substrate temperature. Improved electrical properties, i.e., carrier concentration of {proportional_to}10{sup 18} cm{sup -3} and resistivity of 10{sup -1}{omega} cm at higher substrate temperature for the optimal CIGS films are assumed to be induced by the potential contributions from highly crystallized thin films, existence of Cu{sub 2-x}Se phase and diffusion of Na from substrates to films. (author)

14 SOLAR ENERGY↗

Recombination Kinetics and Stability in Polycrystalline Cu(In,Ga)Se2 Solar Cells

Time-resolved photoluminescence (TRPL) measurements indicate that bare Cu(In,Ga)Se{sub 2} (CIGS) films degrade when they are exposed to air or stored in nitrogen-purged dry boxes. The degradation significantly affects device performance and electro-optical measurements. Measuring films prior to degradation reveals long lifetimes and distinct recombination properties. For high-quality material, the surface recombination velocity at grain boundaries, bare CIGS surfaces, and CIGS/CdS interfaces is less than 10{sup 3} cm/s, and lifetime values are often greater than 50 ns. In high injection, CIGS has recombination properties similar to GaAs. On completed devices, charge-separation dynamics can be characterized.

14 SOLAR ENERGY↗

Core Levels, Band Alignments, and Valence-Band States in CuSbS 2 for Solar Cell Applications

The earth-abundant material CuSbS 2 (CAS) has shown good optical properties as a photovoltaic solar absorber material, but has seen relatively poor solar cell performance. To investigate the reason for this anomaly, the core levels of the constituent elements, surface contaminants, ionization potential, and valence-band spectra are studied by X-ray photoemission spectroscopy. The ionization potential and electron affinity for this material (4.98 and 3.43 eV) are lower than those for other common absorbers, including CuInxGa (1-x) Se 2 (CIGS). Experimentally corroborated density functional theory (DFT) calculations show that the valence band maximum is raised by the lone pair electrons from the antimony cations contributing additional states when compared with indium or gallium cations in CIGS. The resulting conduction band misalignment with CdS is a reason for the poor performance of cells incorporating a CAS/CdS heterojunction, supporting the idea that using a cell design analogous to CIGS is unhelpful. These findings underline the critical importance of considering the electronic structure when selecting cell architectures that optimize open-circuit voltages and cell efficiencies.

14 SOLAR ENERGY↗

Epitaxial growth of very large grain bicrystalline Cu(In,Ga)Se{sub 2} thin films by a hybrid sputtering method

Epitaxial bicrystals of Cu(In,Ga)Se{sub 2} (CIGS) have been grown and characterized spanning high angle incoherent grain boundaries. The grain boundaries in the CIGS were generally found to be fully dense, although voids were occasionally observed as is typical in CIGS polycrystals. There was no significant difference in composition of the grains across the boundary. No reduction in dislocation density near the grain boundary was found. X-ray diffraction results were consistent with partially strained epitaxial layers with domains tilted relative to the surface normal and with different rotations in the surface plane. The tetragonal symmetry of the unit cell appears to have affected the residual strain in the layers and the amount of misfit observed. The surface morphology was found to reflect trends observed in growth of single well-oriented crystals. Differences in surface potential of air-exposed grains showed a morphology-dependent work function. However, no significant potential difference was observed that was related to the grain boundary. Surface morphology effects were much greater. The surface showed a clear rotation of morphology across twin boundaries in the surface plane of one grain. The twin boundaries were also fully dense.

36 MATERIALS SCIENCE↗

Relationship between open-circuit voltage in Cu(In,Ga)Se{sub 2} solar cell and peak position of (220/204) preferred orientation near its absorber surface

Cu(In,Ga)Se{sub 2} (CIGS) absorbers with various Ga/III, Ga/(In+Ga), profiles are prepared by the so-called “multi-layer precursor method” using multi-layer co-evaporation of material sources. It is revealed that open-circuit voltage (V{sub OC}) of CIGS solar cell is primarily dependent on averaged Ga/III near the surface of its absorber. This averaged Ga/III is well predicted by peak position of (220/204) preferred orientation of CIGS film near its surface investigated by glancing-incidence X-ray diffraction with 0.1° incident angle. Finally, the peak position of (220/204) preferred orientation is proposed as a measure of V{sub OC} before solar cell fabrication.

36 MATERIALS SCIENCE↗

Cu−In−Ga−S quantum dot composition-dependent device performance of electrically driven light-emitting diodes

Colloidal synthesis of ternary and quaternary quantum dots (QDs) of In/Ga ratio-varied Cu−In{sub 1−x}−Ga{sub x}−S (CIGS) with nominal x = 0, 0.5, 0.7, and 1 and their application for the fabrication of quantum dot-light-emitting diodes (QLEDs) are reported. Four QLEDs having CIGS QDs with different compositions are all solution-processed in the framework of multilayered structure, where QD emitting layer is sandwiched by hybrid charge transport layers of poly(9-vinlycarbazole) and ZnO nanoparticles. The device performance such as luminance and efficiency is found to be strongly dependent on the composition of CIGS QDs, and well interpreted by the device energy level diagram proposed through the determination of QD valence band minima by photoelectron emission spectroscopic measurement.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Large magnetoresistance in Heusler-alloy-based epitaxial magnetic junctions with semiconducting Cu(In{sub 0.8}Ga{sub 0.2})Se{sub 2} spacer

We investigated the structure and magneto-transport properties of magnetic junctions using a Co{sub 2}Fe(Ga{sub 0.5}Ge{sub 0.5}) Heusler alloy as ferromagnetic electrodes and a Cu(In{sub 0.8}Ga{sub 0.2})Se{sub 2} (CIGS) semiconductor as spacers. Owing to the semiconducting nature of the CIGS spacer, large magnetoresistance (MR) ratios of 40% at room temperature and 100% at 8 K were obtained for low resistance-area product (RA) values between 0.3 and 3 Ω μm{sup 2}. Transmission electron microscopy observations confirmed the fully epitaxial growth of the chalcopyrite CIGS layer, and the temperature dependence of RA indicated that the large MR was due to spin dependent tunneling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Comparative operando XPS studies of quasi-Fermi level splitting and open-circuit voltage in CZTSe/CdS and CIGS/CdS junctions and device structures

This contribution describes operando x-ray photoelectron spectroscopy (opXPS) studies of Cu(In,Ga)Se 2 (CIGS) and Cu 2 ZnSnSe 4 (CZTSe) absorber layers and device structures. X-ray-excited valence-band and core-level spectra were acquired on bare absorber surfaces and after CdS and ZnO:Al depositions in standard absorber/CdS/ZnO/ZnO:Al device stacks. OpXPS data sets were acquired at various x-ray fluxes, with and without white-light illumination. From these measurements, quasi-Fermi level splitting (ΔE F ) values in the absorber/CdS junctions were measured directly as a function of excitation conditions. For both CIGS and CZTSe, results show that ..delta..EF proportional to the full open-circuit voltage (V OC ) of the completed devices is present after the deposition of the CdS layer - i.e., E F = qV OC - demonstrating that the so-called V OC deficit in CZTSe solar cells is also present at this stage of processing. The authors find that photoexcitation due to x-rays or stray visible light during XPS or similar measurements can produce measurable photovoltages in materials, absorber/CdS junctions, and finished devices. In situ current density versus voltage measurements on a typical CIGS device reveal that x-ray-induced photoexcitation associated with typical XPS measurement conditions is equivalent to ~3 x 10 -3 suns, which in this study produced V OC = 440 mV. These findings demonstrate that accounting for photoexcitation conditions during XPS or similar measurements can improve band-offset determinations and produce more reliable values for the junction built-in voltage. The implications of the study findings on the CZTSe V OC deficit and device performance are discussed.

36 MATERIALS SCIENCE↗

Joint PP and PS plane-wave wave-equation migration-velocity analysis

Conventional joint PP and PS velocity analysis is based on ray tomography. We develop a joint PP and PS wave-equation migration-velocity-analysis method using plane-wave common-image gathers (CIGs) to produce accurate P- and S-wave velocity models. The objective function of our new method consists of three terms: The first and second terms penalize the moveout residuals computed from PP and PS plane-wave CIGs, respectively, and the third term constrains the nonzero relative depth shifts between the PP and PS migration images. The moveout of plane-wave CIGs is automatically picked using a semblance analysis method, and the relative depth shifts between the PP and PS images are automatically computed using dynamic warping or manually picking the depths of certain primary reflectors. The moveout residuals and the relative depth shifts are transformed into weighted image perturbations, and they are then projected into the velocity models to update the P- and S-wave velocity models using the scalar-wave equations and their linearized forms. Here, numerical tests with synthetic and multicomponent field data demonstrate that our method can simultaneously invert for accurate P- and S-wave velocity models for elastic migration.

58 GEOSCIENCES↗

Photovoltaics Informatics: Harnessing Energy Science via Data-Driven Approaches

We discuss our current research focus on photovoltaic (PV) informatics, which is dedicated to functionality enhancement of solar materials through data management and data mining-aided, integrated computational materials engineering (ICME) for rapid screening and identification of multi-scale processing/structure/property/performance relationships. Our current PV informatics research ranges from transparent conducting oxides (TCO) to solar absorber materials. As a test bed, we report on examples of our current data management system for PV research and advanced data mining to improve the performance of solar cells such as CuInxGa1-xSe2 (CIGS) aiming at low-cost and high-rate processes. For the PV data management, we show recent developments of a strategy for data modeling, collection and aggregation methods, and construction of data interfaces, which enable proper archiving and data handling for data mining. For scientific data mining, the value of high-dimensional visualizations and non-linear dimensionality reduction is demonstrated to quantitatively assess how process conditions or properties are interconnected in the context of the development of Al-doped ZnO (AZO) thin films as the TCO layers for CIGS devices. Such relationships between processing and property of TCOs lead to optimal process design toward enhanced performance of CIGS cells/devices.

CONSTRUCTION↗

Flexible Ultra Moisture Barrier Film for Thin-Film Photovoltaic Applications

Flexible Thin-film photovoltaic (TFPV) is a low cost alternative to incumbent c-Si PV products as it requires less volume of costly semiconductor materials and it can potentially reduce installation cost. Among the TFPV options, copper indium gallium diselenide (CIGS) has the highest efficiency and is believed to be one of the most attractive candidates to achieve PV cost reduction. However, CIGS cells are very moisture sensitive and require module water vapor transmission rate (WVTR) of less than 1x10 -4 gram of water per square meter per day (g-H 2 O/m 2 /day). Successful development and commercialization of flexible transparent ultra moisture barrier film is the key to enable flexible CIGS TFPV products, and thus enable ultimate PV cost reduction.

14 SOLAR ENERGY↗

Interfacial Modifiers

Our project objective in the first and only Budget Period was to demonstrate the potential of nm-scale organofunctional silane coatings as a method of extending the lifetime of PV materials and devices. Specifically, the target was to double the lifetime performance of a laminated Cu(In,Ga)Se2 (CIGS) cell under real-world and accelerated aging exposure conditions. Key findings are that modification of aluminum-doped zinc oxide (AZO) films (materials used as transparent conductive oxide (TCO) top contacts) resulted in decreased degradation of optical and electrical properties under damp heat (DH) exposure compared to un-modified AZO. The most significant finding is that modification of the AZO top contact of full CIGS devices resulted in significantly improved properties under DH exposure compared to un-modified devices, by a factor of 4 after 1000 h. Results of this one-year project have demonstrated that surface functionalization is a viable pathway for extending the lifetime of state-of-the-art CIGS devices.

14 SOLAR ENERGY↗