High Speed Travelling Wave Carrier Depletion Silicon Mach-Zehnder Modulator.
Abstract not provided.
DeRose, Christopher T.↗
SEARCH · Engineering Papers
Results for “CARRIER MODULATION”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
High Speed Travelling Wave Carrier Depletion Silicon Mach-Zehnder Modulator.
Abstract not provided.
DeRose, Christopher T.↗
Artifacts in time-resolved Kelvin probe force microscopy
Kelvin probe force microscopy (KPFM) has been used for the characterization of metals, insulators, and semiconducting materials on the nanometer scale. Especially in semiconductors, the charge dynamics are of high interest. Recently, several techniques for time-resolved measurements with time resolution down to picoseconds have been developed, many times using a modulated excitation signal, e.g. light modulation or bias modulation that induces changes in the charge carrier distribution. For fast modulation frequencies, the KPFM controller measures an average surface potential, which contains information about the involved charge carrier dynamics. Here, we show that such measurements are prone to artifacts due to frequency mixing, by performing numerical dynamics simulations of the cantilever oscillation in KPFM subjected to a bias-modulated signal. For square bias pulses, the resulting time-dependent electrostatic forces are very complex and result in intricate mixing of frequencies that may, in some cases, have a component at the detection frequency, leading to falsified KPFM measurements. Additionally, we performed fast Fourier transform (FFT) analyses that match the results of the numerical dynamics simulations. Small differences are observed that can be attributed to transients and higher-order Fourier components, as a consequence of the intricate nature of the cantilever driving forces. These results are corroborated by experimental measurements on a model system. In the experimental case, additional artifacts are observed due to constructive or destructive interference of the bias modulation with the cantilever oscillation. Also, in the case of light modulation, we demonstrate artifacts due to unwanted illumination of the photodetector of the beam deflection detection system. Lastly, guidelines for avoiding such artifacts are given.
36 MATERIALS SCIENCE↗
Temperature feedback control for long-term carrier-envelope phase locking
A feedback control module for stabilizing a carrier-envelope phase of an output of a laser oscillator system comprises a first photodetector, a second photodetector, a phase stabilizer, an optical modulator, and a thermal control element. The first photodetector may generate a first feedback signal corresponding to a first portion of a laser beam from an oscillator. The second photodetector may generate a second feedback signal corresponding to a second portion of the laser beam filtered by a low-pass filter. The phase stabilizer may divide the frequency of the first feedback signal by a factor and generate an error signal corresponding to the difference between the frequency-divided first feedback signal and the second feedback signal. The optical modulator may modulate the laser beam within the oscillator corresponding to the error signal. The thermal control unit may change the temperature of the oscillator corresponding to a signal operable to control the optical modulator.
47 OTHER INSTRUMENTATION↗
Optimum angle modulation.
Transmission of analog message over channel corrupted by additive Gaussian noise, using modulation of sinusoidal carrier
PHASE MODULATION↗
Carrier - Interference ratios for frequency sharing between satellite systems transmitting frequency modulated and digital television signals
As the data rates required for digitally encoded television are reduced, satellite systems employing the transmission of digitally encoded television will become attractive. It is likely that television transmitted in this format will be adjacent to or in the same frequency band as television transmissions in other modulation formats, so a knowledge of carrier to interference power ratios as a function of assessed picture quality will be required for frequency sharing between these different modulation formats. This paper presents the results of subjective and quantitative tests describing the results of interference to a particular digital television system from a frequency modulated (FM) television system, and for interference to an FM television system from a digital television system.
Barnes, S. P.↗
Methods of epsilon-near-zero optical modulation
A method of optical modulation in a non-resonant epsilon-near-zero (EMZ) plasmonic electro-optical modulator is provided. An optical carrier is injected into a waveguide optically coupled to a layer of transparent conductive material having an epsilon-near-zero (ENZ) wavelength. The transparent conductive material layer constitutes a portion of a capacitive structure that includes a gate dielectric layer. A time-varying bias voltage applied across the gate dielectric layer shifts the ENZ wavelength toward the carrier wavelength, and thereby impresses a phase modulation pattern on the carrier wave.
Wood, Michael↗
Time delay and distance measurement
A method for measuring time delay and distance may include providing an electromagnetic radiation carrier frequency and modulating one or more of amplitude, phase, frequency, polarization, and pointing angle of the carrier frequency with a return to zero (RZ) pseudo random noise (PN) code. The RZ PN code may have a constant bit period and a pulse duration that is less than the bit period. A receiver may detect the electromagnetic radiation and calculate the scattering profile versus time (or range) by computing a cross correlation function between the recorded received signal and a three-state RZ PN code kernel in the receiver. The method also may be used for pulse delay time (i.e., PPM) communications.
Abshire, James B.↗
SELECTION OF MODULATION TECHNIQUE FOR SPACE-VEHICLE TELEMETRY
General considerations that influence the selection of the modulation method at subcarrier and rf carrier levels for spacecraft telemetry
SIGNAL TRANSMISSION↗
Signal simulator model A-111
A signal simulator designed to function as a signal source for Doppler tracking high data rate receivers is described. The simulator produces modulated signals whose carrier frequency can be varied between 200 and 900 MHz at rates greater than 20 MHz/sec. The modulation is phase shift keying with data rate up to 300 megabits per second.
Flattau, T.↗
Status of the US Space Station ECLSS and internal TCS
The U.S. Space Station includes many elements and systems. Responsibility for these have been delegated to four NASA centers via a work packaging concept. Marshall Space Flight Center (MSFC) is responsible for work package one (WPOI) which includes the habitation, laboratory modules, the logistic carrier elements, as well as the environmental control and life support system (ECLSS), the internal thermal control system (ITCS), and the internal audio and video systems. Current status of the ECLSS and internal thermal are the subjects of this paper. The ECLSS is composed of six subsystem groups: the temperature humidity control, the atmosphere control and supply, the air revitalization, water reclamation and management, fecal waste management, and the fire detection and suppression subsystems. The internal TCS consists of all WP01 elements of passive and active thermal measures. The ECLSS and ITCS provide services for the permanently orbiting pressurized modules as well as the pressurized and unpressurized logistics carriers. The logistics carriers are used as ground-to-station ferries for both resupply and initial delivery of selected new equipment and later replacement items. Equipment, which cannot be subjected to the rigors of the space environment, will be carried in the pressurized logistic carrier; while an unpressurized carrier is used to resupply other commodities, such as external fluid consumables. The laboratory module houses the equipment for both payloads and subsystem maintenance and repair. The habitation module is dedicated to providing living and sleeping quarters including a galley, sleeping provisions, hygiene facilities, medical services as well as services for exercise and relaxation. The four nodes that join the two modules at their ends also house electronics as well as work stations and outside viewing cupolas. The airlocks, one providing an emergency hyperbaric chamber capability, are also attached. This assembly constitutes the U.S. provided portion of the initial station. Additional international modules and docking provisions for future attached pressurized payload as well as dual logistic module and growth capabilities are also provided. The primary heat rejection mechanism is achieved via a central set of radiators provided by another work package. The interface with the central TCS at the module heat exchangers defines the active control interface boundary of the ITCS with the central TCS. All internal cooling of the permanent orbital elements are provided via internal active fluid loops within the elements utilizing water as the transport media. Cabin and equipment cooling are provided by forced air flow and cold plate heat sinks. A special active cooling loop is provided in the laboratory module to accommodate experiments and other payloads. Coatings and insulation are used in conjunction with the active components to passively limit heat losses/gains. The most challenging ECLSS new technology issues relate to oxygen and water recovery. Closure of the oxygen loop requires the use of new regenerative CO 2 removal and concentration techniques, CO 2 reduction to convert the CO 2 to water with a waste by-product, and the electrolysis of water to produce breathing oxygen for water recovery. For water recovery three separate loops are currently planned. One loop provides potable water by utilizing a combination of recovered condensate and CO 2 reduction water. A second loop purifies hygiene water from waste from the showers, clothes washer, hygiene/hand wash stations and a dishwasher. The third loop provides hygiene water by the reclamation and purification of urine water. This paper outlines the basic services provided by the ECLSS and ITCS and describes the ECLSS functional distribution throughout the pressurized assembly.
R. Humphries↗
Digital phase-modulation/multiplex system
System combines and modulates subcarriers and pulse code modulation data entirely with digital logic, and phase modulates an RF carrier with a digital representation of the composite subcarrier signal. It permits programmed control and modification of the modulation indices.
Couvillon, L. A.↗
Polarized near-infrared intersubband absorptions in CdSe colloidal quantum wells
Colloidal quantum wells are two-dimensional materials grown with atomically-precise thickness that dictates their electronic structure. Although intersubband absorption in epitaxial quantum wells is well-known, analogous observations in non-epitaxial two-dimensional materials are sparse. Here in this paper, we show that CdSe nanoplatelet quantum wells have narrow (30–200 meV), polarized intersubband absorption features when photoexcited or under applied bias, which can be tuned by thickness across the near-infrared (NIR) spectral window (900–1600 nm) inclusive of important telecommunications wavelengths. By examination of the optical absorption and polarization-resolved measurements, the NIR absorptions are assigned to electron intersubband transitions. Under photoexcitation, the intersubband features display hot carrier and Auger recombination effects similar to excitonic absorptions. Sequenced two-color photoexcitation permits the sub-picosecond modulation of the carrier temperature in such colloidal quantum wells. This work suggests that colloidal quantum wells may be promising building blocks for NIR technologies.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Gaussian and click noise in an FM/FM multiplex receiver.
An FM/FM system is one in which the signal information frequency modulates a subcarrier, which, in turn, frequency modulates a main carrier for transmission. The detection process then involves two frequency demodulators in sequence. Using Rice's click model for both FM demodulators, we obtain the average click rate and an approximate output spectrum that include the effect of the impulses generated by the carrier demodulator on the subcarrier demodulation at and below threshold. We then focus on the threshold behavior of these systems and the proportioning of their modulation parameters so as to provide certain desired characteristics. We find that due to the filtering action of the second demodulator, the number of output clicks from carrier generated spikes can be orders of magnitude smaller, yet their contribution to the output noise can be much greater than that produced by the first demodulation.
Stochel, N. H.↗
Wide-band analog frequency modulation of optic signals using indirect techniques
The wideband frequency modulation (FM) of an optical carrier by a radio frequency (RF) or microwave signal can be accomplished independent of laser type when indirect modulation is employed. Indirect modulators exploit the integral relation of phase to frequency so that phase modulators can be used to impress frequency modulation on an optical carrier. The use of integrated optics phase modulators, which are highly linear, enables the generation of optical wideband FM signals with very low intermodulation distortion. This modulator can be used as part of an optical wideband FM link for RF and microwave signals. Experimental results from the test of an indirect frequency modulator for an optical carrier are discussed.
Fitzmartin, D. J.↗
Simulation of the TDRS multipath environment
Design principles and implementation methods are discussed for simulating the propagation path between a tracking and data relay satellite and a mission spacecraft. The emphasis is on multipath and Doppler simulation but additive disturbances are also considered. The recommended form of the simulator is fed separately with the unmodulated carrier, the unmodulated subcarriers (or spread-spectrum components) and the data signals. The perturbations are also introduced separately; then successive modulation operations are performed. The simulator is segmented into elements that perform the various functions of direct and specular multipath, diffuse fading, Doppler shift and delay spread. Delay spreads are realized by discrete delays operating on baseband signals. Doppler simulation and ionospheric or diffuse multipath fading are applied to individual paths before or after modulation of the carrier by delayed baseband signals. Block diagrams are presented on how the different elements are combined to create a complete channel simulator.
Baghdady, E. J.↗
Protonic/electronic hybrid oxide transistor gated by chitosan and its full-swing low voltage inverter applications
Modulation of charge carrier density in condensed materials based on ionic/electronic interaction has attracted much attention. Here, protonic/electronic hybrid indium-zinc-oxide (IZO) transistors gated by chitosan based electrolyte were obtained. The chitosan-based electrolyte illustrates a high proton conductivity and an extremely strong proton gating behavior. The transistor illustrates good electrical performances at a low operating voltage of ∼1.0 V such as on/off ratio of ∼3 × 10{sup 7}, subthreshold swing of ∼65 mV/dec, threshold voltage of ∼0.3 V, and mobility of ∼7 cm{sup 2}/V s. Good positive gate bias stress stabilities are obtained. Furthermore, a low voltage driven resistor-loaded inverter was built by using an IZO transistor in series with a load resistor, exhibiting a linear relationship between the voltage gain and the supplied voltage. The inverter is also used for decreasing noises of input signals. The protonic/electronic hybrid IZO transistors have potential applications in biochemical sensors and portable electronics.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Low data rate coherent optical link demonstration using frequency stabilized solid state lasers
A low data rate laboratory heterodyne link demonstration operating at 1.06 micron using frequency stabilized Nd:YAG lasers was implemented. The data was modulated onto the optical carrier at 100 kbps using binary pulse position modulation. Phase coherent reception was achieved by closing the receiver phase tracking loop around the piezo-electric and temperature-tuned local oscillator laser. Initial frequency acquisition was accomplished by linearly scanning the LO frequency over the uncertainty range while a combined frequency and phase tracking loop searches for a lock indicator signal. The link performance was experimentally evaluated and compared to the theoretical predictions.
Chen, CHIEN-C.↗