Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CAPSULES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

A tale of tails: Sialidase is key to success in a model of phage therapy against K1-capsulated Escherichia coli

Prior studies treating mice infected with Escherichia coli O18:K1:H7 observed that phages requiring the K1 capsule for infection (K1-dep) were superior to capsule-independent (K1-ind) phages. We show that three K1-ind phages all have low fitness when grown on cells in serum whereas fitnesses of four K1-dep phages were high. The difference is serum-specific, as fitnesses in broth overlapped. Sialidase activity was associated with all K1-dep virions tested but no K1-ind virions, a phenotype supported by sequence analyses. Adding endosialidase to cells infected with K1-ind phage increased fitness in serum by enhancing productive infection after adsorption. We propose that virion sialidase activity is the primary determinant of high fitness on cells grown in serum, and thus in a mammalian host. Although the benefit of sialidase is specific to K1-capsulated bacteria, this study may provide a scientific rationale for selecting phages for therapeutic use in many systemic infections.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Polarity-Tolerant Chloride Binding in Foldamer Capsules by Programmed Solvent-Exclusion

Persistent anion binding in a wide range of solution environments is a key challenge that continues to motivate and demand new strategies in synthetic receptor design. Though strong binding in low-polarity solvents has become routine, our ability to maintain high affinities in high-polarity solvents has not yet reached the standard set by nature. Anions are bound and transported regularly in aqueous environments by proteins that use secondary and tertiary structure to isolate anion binding sites from water. Inspired by this principle of solvent exclusion, we created a sequence-defined foldameric capsule whose global minimum conformation displays a helical folded state and is preorganized for 1:1 anion complexation. The high stability of the folded geometry and its ability to exclude solvent were supported by solid-state and solution phase studies. This capsule then withstood a 4-fold increase in solvent dielectric constant (εr) from dichloromethane (9) to acetonitrile (36) while maintaining a high and solvent-independent affinity of 10 5 M –1 ; ΔG ~ 28 kJ mol –1 . This behavior is unusual. More typical of solvent-dependent behavior, Cl – affinities were seen to plummet in control compounds, such as aryl-triazole macrocycles and pentads, with their solvent-exposed binding cavities susceptible to dielectric screening. Finally, dimethyl sulfoxide denatures the foldamer by putative solvent binding, which then lowers the foldamer’s Cl – affinity to normal levels. Furthermore, the design of this capsule demonstrates a new prototype for the development of potent receptors that can operate in polar solvents and has the potential to help manage hydrophilic anions present in the hydrosphere and biosphere.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An embryo of protocells: The capsule of graphene with selective ion channels

In this study, the synthesis of artificial cell is a route for searching the origin of protocell. Here, we create a novel cell model of graphene capsules with selective ion channels, indicating that graphene might be an embryo of protocell membrane. Firstly, we found that the highly oxidized graphene and phospholipid-graphene oxide composite would curl into capsules under a strongly acidic saturated solution of heavy metallic salt solution at low temperature. Secondly, L-amino acids exhibited higher reactivity than D-amino acids on graphene oxides to form peptides, and the formed peptides in the influence of graphene would be transformed into a secondary structure, promoting the formation of left-handed proteins. Lastly, monolayer nanoporous graphene, prepared by unfocused 84 Kr 25+ , has a high selectivity for permeation of the monovalent metal ions ( Rb + > K + > Cs + > Na + > Li + , based on permeation concentration), but does not allow Cl- go through. It is similar to K+ channels, which would cause an influx of K + into capsule of graphene with the increase of pH in the primitive ocean, creating a suitable inner condition for the origin of life. Therefore, we built a model cell of graphene, which would provide a route for reproducing the origin of life.

59 BASIC BIOLOGICAL SCIENCES↗

Response of the first wetted wall of an IFE reactor chamber to the energy release from a direct-drive DT capsule

Radiation hydrodynamics 1D simulations were performed with two concurrent codes, DEIRA and RAMPHY. The DEIRA code was used for DT capsule implosion and burn, and the RAMPHY code was used for computation of X-ray and fast ions deposition in the first wall liquid film of the reactor chamber. The simulations were run for 740 MJ direct drive DT capsule and Pb thin liquid wall reactor chamber of 10 m diameter. Temporal profiles for DT capsule leaking power of X-rays, neutrons and fast {sup 4}He ions were obtained and spatial profiles of the liquid film flow parameter were computed and analyzed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spectral measurements of asymmetrically irradiated capsule backlighters

Capsule backlighters provide a quasi-continuum x-ray spectrum over a wide range of photon energies. Ideally one irradiates the capsule backlighter symmetrically, however, in complex experimental geometries, this is not always possible. In recent experiments we irradiated capsule backlighters asymmetrically and measured the x-ray spectrum from multiple directions. We will present time-integrated spectra over the photon energy range of ~2-13 keV and time-resolved spectra over the photon energy range of ~2-3 keV. Lastly, we will compare the spectra from different lines of sight to determine if the laser asymmetry results in an angular dependence in the x-ray emission.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of preheat and mix on the fuel adiabat of an imploding capsule

We demonstrate the effect of preheat, hydrodynamic mix and vorticity on the adiabat of the deuterium-tritium (DT) fuel in fusion capsule experiments. We show that the adiabat of the DT fuel increases resulting from hydrodynamic mixing due to the phenomenon of entropy of mixture. An upper limit of mix, M clean =M DT ≥ 0:98 is found necessary to keep the DT fuel on a low adiabat. We demonstrate in this study that the use of a high adiabat for the DT fuel in theoretical analysis and with the aid of 1D code simulations could explain some aspects of 3D effects and mix in capsule implosion. Furthermore, we can infer from our physics model and the observed neutron images the adiabat of the DT fuel in the capsule and the amount of mix produced on the hot spot.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Implosion shape control of high-velocity, large case-to-capsule ratio beryllium ablators at the National Ignition Facility

Experiments at the National Ignition Facility (NIF) show that the implosion shape of inertial confinement fusion ablators is a key factor limiting performance. To achieve more predictable, shape tunable implosions, we have designed and fielded a large 4.2 case-to-capsule ratio target at the NIF using 6.72 mm diameter Au hohlraums and 1.6 mm diameter Cu-doped Be capsules. Simulations show that at these dimensions during a 10 ns 3-shock laser pulse reaching 275 eV hohlraum temperatures, the plasma flow from the hohlraum wall and ablator is not significant enough to impede beam propagation. Experiments measuring the shock symmetry and in-flight shell symmetry closely matched the simulations. Most notably, in two experiments, we demonstrated symmetry control from negative to positive Legendre P2 space by varying the inner to total laser power cone fraction by 5% below and above the predicted symmetric value. In conclusion, some discrepancies found in 1st shock arrival times that could affect agreement in late time implosion symmetry suggest hohlraum and capsule modeling uncertainties do remain, but this target design reduces sensitivities to them.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Robustness to hydrodynamic instabilities in indirectly driven layered capsule implosions

Here, we report on a high convergence ratio liquid layer capsule implosion performed on the National Ignition Facility and contrast it to two previously reported layered implosions, in order to better understand how the capsule design impacts the hydrodynamic stability properties of implosions. Three implosions were performed with similar convergence ratios, fuel entropy, in-flight aspect ratios, and unablated shell mass; these qualities are important for determining hydrodynamic stability. Nevertheless, while two of these implosions exhibited robustness to asymmetries, including our recent experiment that had abnormally large amplitude long-wavelength capsule asymmetries, and produced more than 80% or the yield predicted by one-dimensional (1D) simulations, which do not account for the impacts of hydrodynamic instabilities, the third implosion produced only 14% of the yield from a 1D simulation. We perform a detailed computational analysis of these three shots, which suggests that the combination of several large asymmetry seeds result in the significantly degraded performance: a large 30 μm fill tube, the presence of a microstructure in the high density carbon ablator, and a higher level of drive asymmetry. This indicates that while it is possible to stabilize a high convergence ratio implosion through various means, the factors that determine stability cannot be considered independently. Furthermore, when these asymmetries are combined in 2D simulations, they can exhibit destructive interference and underpredict the yield degradation compared to experiment and three-dimensional simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Symmetric fielding of the largest diamond capsule implosions on the NIF

We present results for the largest diamond capsule implosions driven symmetrically on the National Ignition Facility (NIF) (inner radius of ~1050 μm) without the use of cross beam transfer in cylindrical Hohlraums. We show that the methodology of designing Hohlraum parameters in a semi-empirical way using an extensive database resulted in a round implosion. In addition, we show that the radiation flux symmetry is well controlled during the foot of the pulse and that swings in P2 symmetry between the inflight dense shell and hot spot are within ±4 μm and that swings around peak compression are also within the symmetry specification of ±4 μm. We observed a stronger dependence of symmetry on the capsule scale than previously observed and also observed enhanced inner beam propagation for experiments using a gas fill density of 0.3 mg/cm 3 and 1000 μm inner radius capsules. We have observed sufficient symmetry and mass remaining at near full NIF power and energy, up to 480 TW and 1.9 MJ, with little laser–plasma interactions (low laser backscattered light) and predict that this design could support extended NIF energy of up to 2.1 MJ.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurements of enhanced performance in an indirect drive inertial confinement fusion experiment when reducing the contact area of the capsule support

Experimental results from indirectly driven inertial confinement fusion experiments testing the performance gained from using an alternate capsule tent support are reported. The polar tent describes an alternate geometry for the thin membrane used to support the Deuterium–Tritium (DT) filled capsule. In this work, the contact area is reduced by 23 times by locating the tent support close to the poles of the capsule. The polar tent experiments are repeats of previous 3 shock 1.63 MJ, 400 TW high foot experiments and use a 165 μm thick silicon doped carbon hydrogen plastic (CH) shell. Using the polar tent support, we report a DT neutron yield of 1.07 ×1016, 76% higher than the expected Y DT ∝V 7.7 scaling. This is, at the time of writing, the highest neutron yield to date from a CH shell implosion. Furthermore, we find that the inferred pressure when using the polar tent is significantly above the model based on analytic scaling even when accounting for tent effects. Analysis of x-ray and neutron images shows the reduction of lobes produced by nominal tent features. The reduction of these features in the polar tent experiments leads to decreased low mode (P2 and P4) asymmetry compared to the nominal tent results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Integrated performance of large HDC-capsule implosions on the National Ignition Facility

In this paper, we report on eight, indirect-drive, deuterium–tritium-layered, inertial-confinement-fusion experiments at the National Ignition Facility to determine the largest capsule that can be driven symmetrically without relying on cross-beam energy transfer or advanced Hohlraum designs. Targets with inner radii of up to 1050 μm exhibited controllable P 2 symmetry, while larger capsules suffered from diminished equatorial drive. Reducing the Hohlraum gas-fill-density from 0.45 mg/cm 3 to 0.3 mg/cm 3 did not result in a favorable shift of P 2 amplitude as observed in preceding tuning experiments. Reducing the laser-entrance-hole diameter from 4 mm to 3.64 mm decreased polar radiation losses as expected, resulting in an oblate symmetry. The experiments exhibited the expected performance benefit from increased experimental scale, with yields at a fixed implosion velocity roughly following the predicted 1D dependence. With an inner radius of 1050 μm and a case-to-capsule-ratio of 3.0, experiment N181104 is the lowest implosion-velocity experiment to exceed a total neutron yield of 10 16 .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-volume and -adiabat capsule (“HVAC”) ignition: Lowered fuel compression requirements using advanced Hohlraums

Lower-than-expected deuterium–tritium fuel areal densities have been experimentally inferred across a variety of high-convergence, nominally low-adiabat implosion campaigns at the National Ignition Facility (NIF) using cylinder-shaped Hohlraums [Hurricane et al., Phys. Plasmas 26, 052704 (2019)]. A leading candidate explanation is the presence of atomic mix between the fuel and ablator from hydrodynamic instability growth [Clark et al., Phys. Plasmas 26, 050601 (2019)], leading to reduced fuel compressibility and an effectively higher (in-flight) fuel adiabat α. Tolerating a high-α implosion can be obtained with significantly higher capsule absorbed energy Ecap according to the one-dimensional (1-D) ignition-threshold-factor analytic scaling [S. Atzeni and J. Meyer-ter-Vehn, Nucl. Fusion 41, 465 (2001)], ITF∼Ecap·α−1.8. Recent experiments with large Al shells in rugby-shaped Hohlraums have established high laser-capsule coupling efficiencies of ≽ 30% [Ping et al., Nat. Phys. 15, 138 (2019)], enabling a path to Ecap≽ 0.5 MJ at the NIF and increased performance margin M ≡ ITF − 1. The ability to operate at high adiabat with large capsules using nonstandard Hohlraums leads to the predicted onset of a volume-ignition mode, defined as when both the entire fuel is the “hot spot” and inertial confinement is principally provided by the ablator compared with the compressed fuel. Such an ignition mode, normally reserved for high-Z targets, e.g., double shells [Amendt et al., Phys. Plasmas 14, 056312 (2007)], is predicted to lead to lower fuel convergence and less exposure to mix due to the intended high adiabat—but at the expense of ∼3–4 × reduced (1-D) yield compared with conventional central hot-spot ignition designs.

Amendt, Peter (ORCID:0000000174021777)↗

Using distributions to understand neutron and x-ray production in ICF ignition capsules and other high energy density plasmas

Here this paper describes how x-ray and neutron distribution functions can be useful tools to visualize the conditions measured in many types of plasma physics experiments. In particular, we model a standard inertial confinement fusion ignition capsule that consists of a Si doped plastic ablator surrounding a layer of deuterium–tritium (DT) ice as the yield varies from 18 kJ to 16.7 MJ and use the distribution functions to show that neutrons and high energy x rays (15 keV) are produced under similar conditions when the yield is low. However, as the capsule starts to support a propagating burn due to alpha heating, the x rays and neutrons are produced under somewhat different conditions in different parts of the plasma. In particular, the x-ray production takes place mainly in the hot plastic ablator for the full yield ignition capsule under quite different plasma conditions from the DT region producing the 14 MeV neutrons, which results in x-ray images with larger radii than the corresponding neutron images. These same distribution functions can be applied to many other plasma physics experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A mechanism for reduced compression in indirectly driven layered capsule implosions

High-yield implosions on the National Ignition Facility rely on maintaining low entropy in the deuterium–tritium fuel, quantified by its adiabat, in order to efficiently couple energy to the hot spot through high compression of the fuel layer. We present very-high-resolution xRAGE simulation results that study the impacts of interfacial mixing and the jetting of materials due to surface defects, defects on internal interfaces, voids, and engineering features on fuel layer compression. Defects and voids are typically neglected in implosion simulations due to their small size and three-dimensional geometry. Our results showed that supersonic jets of material arise through weak spots in the shell at peak implosion velocity that prevent uniform compression of the fuel layer even when they do not introduce contaminant into the hot spot. This occurs despite maintaining low fuel entropy, since the formation of the weak spots involves nonradial displacement of fuel mass. In contrast, simulations show that fuel–ablator mixing due to interfacial instabilities has a much smaller impact on compression. We show that defects on interior interfaces of plastic capsules decrease compression by 15% to 25% and interfacial mixing between the ablator and fuel decreases compression by less than 1% for implosions with plastic or high-density carbon (HDC) ablators. For low adiabat implosions, the impact of jetting seeded by the support tent can also decrease the compression by 25%. We demonstrate that the inclusion of interior defects in simulations can explain the inferred compression in two fielded plastic capsule implosions and that the inclusion of voids, for which available characterization has large uncertainties, in simulations of HDC capsule implosions has a qualitatively consistent impact. This mechanism offers a potential explanation for persistently overestimated fuel compression in design simulations of layered implosions on the National Ignition Facility.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evaluation of Polyimide/Carbon Composite Films for Capsule Support

Capsules in National Ignition Facility targets are conventionally supported by thin polymer films. Recent experiments have shown that these films add significant perturbations to the implosion. Here in this paper, we evaluate stiffer polyimide composite films for use in a new target design that has been predicted to reduce these perturbations. The films are evaluated by their contact radius to the capsule for different deflections and the force they generate at those deflections to center the capsule. We find that a composite film with a single-sided coating of carbon produces the best results and show the performance of these films in target assemblies, highlighting the importance of the indentation depth.

36 MATERIALS SCIENCE↗

Metal Alloy ICF Capsules Created by Electrodeposition

Electrochemical deposition is an attractive alternative to physical vapor deposition and micromachining to produce metal capsules for inertial confinement fusion (ICF). Electrochemical deposition (also referred to as electrodeposition or plating) is expected to produce full-density metal capsules without seams or inclusions of unwanted atomic constituents, the current shortcomings of micromachine and physical vapor deposition, respectively. In this paper, we discuss new cathode designs that allow for the rapid electrodeposition of gold and copper alloys on spherical mandrels by making transient contact with the constantly moving spheres. Electrodeposition of pure gold, copper, platinum, and alloys of gold-copper and gold-silver are demonstrated, with nonporous coatings of >40 µm achieved in only a few hours of plating. The surface roughness of the spheres after electrodeposition is comparable to the starting mandrel, and the coatings appear to be fully dense with no inclusions. A detailed understanding of the electrodeposition conditions that result in different alloy compositions and plating rates will allow for the electrodeposition of graded alloys on spheres in the near future. Finally, this report on the electrodeposition of metals on spherical mandrels is an important first step toward the fabrication of graded-density metal capsules for ICF experiments at the National Ignition Facility.

36 MATERIALS SCIENCE↗

High-density carbon capsule experiments on the national ignition facility

Indirect-drive implosions with a high-density carbon (HDC) capsule were conducted on the National Ignition Facility (NIF) to test HDC properties as an ablator material for inertial confinement fusion. In this study, a series of five experiments were completed with 76-μm-thick HDC capsules using a four-shock laser pulse optimized for HDC. The pulse delivered a total energy of 1.3 MJ with a peak power of 360 TW. The experiment demonstrated good laser to target coupling (~90 %) and excellent nuclear performance. Lastly, a deuterium and tritium gas-filled HDC capsule implosion produced a neutron yield of 1.6×10 15 ± 3×10 13 , a yield over simulated in one dimension of 70%.

42 ENGINEERING↗

Effects of asymmetry and hot-spot shape on ignition capsules

Asymmetric implosion of inertial confinement fusion capsules is known, both experimentally and computationally, to reduce thermonuclear performance. This work shows that low-mode asymmetries degrade performance as a result of a decrease in the hydrodynamic disassembly time of the hot-spot core, which scales with the minimum dimension of the hot spot. The asymmetric shape of a hot spot results in decreased temperatures and areal densities and allows more alpha particles to escape, relative to an ideal spherical implosion, thus reducing alpha-energy deposition in the hot spot. Here, we extend previous ignition theory to include the hot-spot shape and quantify the effects of implosion asymmetry on both the ignition criterion and the capsule performance. The ignition criterion becomes more stringent with increasing deformation of the hot spot. The new theoretical results are validated by comparison with existing experimental data obtained at the National Ignition Facility. The shape effects on thermonuclear performance are relatively more noticeable for capsules having self-heating and high yields. As a result, the degradation of thermonuclear burn can be as high as 45% for shots with a yield lower than 2 × 10 15 and less than 30% for shots with a higher yield.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗