Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CAPACITANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Concentric Coplanar Capacitive Sensor System with Quantitative Model

A concentric coplanar capacitive sensor includes a charged central disc forming a first electrode, an outer annular ring coplanar with and outer to the charged central disc, the outer annular ring forming a second electrode, and a gap between the charged central disc and the outer annular ring. The first electrode and the second electrode may be attached to an insulative film. A method provides for determining transcapacitance between the first electrode and the second electrode and using the transcapacitance in a model that accounts for a dielectric test piece to determine inversely the properties of the dielectric test piece.

Bowler, Nicola↗
NASA NTRS2016

Capacitive Trans-Impedance Amplifier Circuit with Charge Injection Compensation

A capacitive trans-impedance amplifier circuit with charge injection compensation is provided. A feedback capacitor is connected between an inverting input port and an output port of an amplifier. A MOS reset switch has source and drain terminals connected between the inverting input and output ports of the amplifier, and a gate terminal controlled by a reset signal. The reset switch is open or inactive during an integration phase, and closed or active to electrically connect the inverting input port and output port of the amplifier during a reset phase. One or more compensation capacitors are provided that are not implemented as gate oxide or MOS capacitors. Each compensation capacitor has a first port connected to a compensation signal that is a static signal or a toggling compensation signal that toggles between two compensation voltage values, and a second port connected to the inverting input port of the amplifier.

Milkov, Mihail M.↗
NASA NTRS2016

Deformation of Cases in High Capacitance Value Wet Tantalum Capacitors under Environmental Stresses

Internal gas pressure in hermetic wet tantalum capacitors is created by air, electrolyte vapor, and gas generated by electrochemical reactions at the electrodes. This pressure increases substantially with temperature and time of operation due to excessive leakage currents. Deformation of the case occurs when the internal pressure exceeds pressure of the environments and can raise significantly when a part operates in space. Contrary to the cylinder case wet tantalum capacitors that have external sealing by welding and internal sealing provided by the Teflon bushing and crimping of the case, no reliable internal sealing exists in the button case capacitors. Single seal design capacitors are used for high capacitance value wet tantalum capacitors manufactured per DLA L&M drawings #04003, 04005, and 10011, and require additional analysis to assure their reliable application in space systems. In this work, leakage currents and case deformation of button case capacitors were measured during different environmental test conditions. Recommendations for derating, screening and qualification testing are given. This work is a continuation of a series of NEPP reports related to quality and reliability of wet tantalum capacitors.

Tantalum Capacitors↗
NASA NTRSDate not supplied

Quasi-Wireless Capacitive Power Transfer with Secure Data Acquisition for Robotic Systems in Space Infrastructure

Space exploration is dependent on robotic systems that utilize end-effectors to collect samples, probe surfaces, and manipulate objects. These systems can rarely be designed to do all three, forcing engineers to make tradeoffs based on the mission parameters - i.e. should the robotic appendage have a claw, drill, or shovel, and which would be best suited for the mission? Additionally, as more industrial and government entities partake in space exploration, data protection is needed in transit and at rest. To address these challenges, we present a first-of-its- kind robotic linkage that has no wiring between the joints. Instead, quasi-wireless capacitive (QWiC) power transfer is used to send energy over the robot’s chassis without a return wire. This enables the system to be completely modular through the use of single-contact permanent magnet connections, allowing rapid alterations in joint kinematics and/or the changing of end-effectors. For collecting sensor data from the robotic arm and to send remote commands to it, we use a Supervisory Control and Data Acquisition (SCADA) system. Data transmission relies on MQTT and OPC UA communication protocols with encryption. The SCADA server logs and archives sensor data and provides the functionality for authorized users to send remote commands from SCADA client(s) to motors. A SCADA client can be any of the web browsers that connects to a server via a secure communication channel using SSL protocol. Furthermore, as an extra data protection mechanism, we inject noise to the sensor data traffic, which obfuscates the timing of sensor data packets and adds confusion about which data packet represents which motor.

wireless sensor networks↗
NASA NTRSDate not supplied

Monitoring of Ionic Silver Biocide with Capacitively-Coupled Contactless Conductivity Detection (C4D)

Monitoring of biocide dosing in spacecraft potable water systems is desirable to ensure dosing system operation and resultant microbial control. Electrolytic conductivity is linearly related to the concentration ionic silver (Ag+, the baseline biocide for future NASA missions) chemically dosed into highly purified water, and could serve as a proxy measurement. Traditional conductivity cells rely on immersed metal or graphite electrodes, which may potentially be subject to significant current-induced or auto-galvanic deposition of Ag+. Furthermore, oxide fouling may potentially induce measurement errors. Capacitively-coupled contactless conductivity detection (C4D) is a promising alternative. C4D uses electrodes placed outside an inert, non-conductive flow path, potentially mitigating such problems. We identified and purchased a commercial C4D system with claimed performance (conductivity range: 20 nS/cm to 4 µS/cm) appropriate for this application. We characterized the instrument’s performance with conductivity standards and Ag+ solutions. We began investigations considering practical and long-term detector operation, including potential current-induced deposition of conductive deposits at the tubing wall. In addition, we designed a side-stream flow system to provide liquid flow through the narrow tubing (1/16” outer diameter) required by the detector and characterized the performance of the combined C4D detector/flow system. Finally, we completed theoretical modeling of expected conductivity change with multiple dosing techniques and water chemistries.

Lance Dean Delzeit↗
NASA NTRS2026

Thermal Cycle and Capacitance Testing of Mezzo Industries Phase Changer Material Heat Capacitor

Effective Thermal management is essential for the safety and performance of human spacecraft, especially during long-duration missions with fluctuating heat loads. Phase Change Material (PCM) heat exchangers offer a compact, efficient solution by storing and releasing thermal energy through latent heat during phase transitions. This allows PCM systems to buffer transient thermal loads without immediate heat rejection, reducing the need for oversized radiators – particularly critical during ascent and re-entry when radiators are stowed. By maintaining stable temperatures in crew cabins and equipment bays, PCM technology enhances crew comfort, protects sensitive systems, and supports long-term mission sustainability with minimal mass and volume impact. A phase change material heat capacitor prototype, designed and built under a NASA Small Business Innovation Research grant by Mezzo Technologies, utilizes a laser welding microtube manufacturing process that promises increased reliability and performance over current manufacturing methods like brazing. This heat exchanger was tested through coolant thermal cycling within the expected flow rates and temperature range of the Orion spacecraft, the crewed spacecraft taking NASA astronauts to the moon under the Artemis Program. The useful heat storage capacitance was measured and compared to Orion spacecraft requirements.

Active Thermal Control Systems↗
NASA NTRSDate not supplied

Thermal Cycle and Capacitance Testing of Mezzo Industries Phase Change Material Heat Capacitor

A phase change material heat capacitor prototype, designed and built under a NASA Small Business Innovation Research grant by Mezzo Technologies, was tested through coolant thermal cycling within the expected flow rates and temperature range of the Orion spacecraft’s propylene glycol-water mixture coolant system. Testing was performed with the phase change material contained under sealed conditions after a degassing procedure and exposed to atmosphere without prior degassing. The useful heat storage capacitance was measured and compared to Orion spacecraft requirements and theoretical N-Pentadecane storage capacity.

Propylene Glycol Water↗
DOE OSTI2024

Development & Experimental Validation of a Generalized Resistance-Capacitance Model for Numerical Simulation of Phase-Change Material Embedded Heat Exchangers

Latent heat thermal energy storage (LHTES) using phase change material (PCM) has attracted increased attention as a viable solution for overcoming the mismatch between energy supply and demand for renewable energy-based systems. PCM-embedded heat exchangers (PCM-HX) have the potential to significantly improve thermal performance due to high storage capacity and low temperature variation during the phase change process. Most models for simulating LHTES heat transfer use Computational Fluid Dynamics (CFD) simulations, which have high computational costs resulting from considering the complex and time-dependent physics relevant to PCM-HXs. In this paper, a Generalized Resistance Capacitance-based Model (GRCM) was developed to predict the thermal performance of arbitrary PCM-HXs in a computationally efficient manner without compromising modeling accuracy. The GRCM is exercised for three case studies: (i) verification for a single-slabbed finned PCM-HX, (ii) verification and validation for a copper foam/paraffin composite PCM-HX, and (iii) validation for a straight tube annular finned PCM-HX. The copper foam PCM-HX uses an electric heater at the top of HX, while the other two configurations utilize water as heat transfer fluid. For the single-slabbed finned PCM-HX melting case, the mean deviation in average PCM temperature predicted by the GRCM compared to the CFD model was between 0.56 – 0.73 K, with maximum temperature deviation of 2.68 K. For the HTF outlet temperature, the validation results showed that GRCM prediction matches very well with experimental data, with mean temperature deviation of 0.24 K during melting case, while for solidification case was 0.34 K. These results showcase the GRCM’s capability for accurately reproducing the thermal characteristics of PCM-HXs with considerably lower computational effort.

42 ENGINEERING↗
DOE OSTI2025

Chemical Vapor Deposition-Grown Hexagonal Boron Nitride and Graphene for Tandem Dielectric Capacitive Polymer Devices

To address the low energy density of polymeric capacitors, this work explores how tandem combinations of antagonistic properties can enhance energy storage. We introduce multilayer architecture integrating chemical vapor deposition (CVD)-grown ≈2 nm hexagonal boron nitride (hBN) and graphene with ferroelectric polyvinylidene fluoride (PVDF) and linear polyetherimide (PEI) layers to suppress leakage paths, reduce loss, and promote Maxwell–Wagner–Sillars polarization. Raman spectroscopy, X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM), and plasma focused ion beam (PFIB) analyses confirm robust material integration. In conclusion, for the tandem device, E BD ≈600 V/μm, while individual layers show lower values (PVDF|Graphene (Gr)|PVDF ≈ 50 V/μm and PEI|hBN|PEI ≈ 275 V/μm), yielding an overall ≈6000% enhancement and demonstrating the effectiveness of the 2D multilayer design.

Chemical vapor deposition (CVD)↗
DOE OSTI2025

Enhanced dielectric insulation of biaxially oriented high temperature polyester films for capacitive energy storage

Biaxially oriented polypropylene (BOPP) films are widely used in dielectric capacitors due to their ultralow loss, high breakdown strength, and long lifetime. However, their poor temperature tolerance limits applications in emerging high-temperature environments such as wide-band-gap power electronics in electric vehicles. Here, we report significantly enhanced dielectric insulation properties of biaxially oriented poly(ethylene 2,6-naphthalate) (BOPEN) films compared to biaxially oriented poly(ethylene terephthalate) (BOPET) films, despite their similar semicrystalline morphologies. BOPEN exhibits higher DC and AC breakdown strengths and markedly extended lifetimes at elevated temperatures. For instance, at 120 °C, the DC Weibull lifetime of BOPEN exceeded that of BOPET by over two orders of magnitude and even surpassed that of BOPP. Through comprehensive analyses—leakage current, electric displacement-electric field loops, and thermally stimulated depolarization current—we attribute this superior performance to suppressed homocharge injection and conduction losses, enabled by the rigid naphthalene-based backbone in BOPEN that reduces dipole mobility and chain polarity. These findings underscore the potential of BOPEN as a next-generation polymer dielectric for high-temperature capacitor applications.

25 ENERGY STORAGE↗
DOE OSTI2025

Under-capacitated and over-powered? Rural austerity and asymmetrical negotiating relationships in US wind energy development

Though rural local governments are central actors in renewable energy development, local governments in the United States (US) remain systematically under-funded. This paper considers what the manifestations of austerity in local governments broadly and rural localities specifically mean for renewable energy development and for energy transitions. Drawing on a survey of 262 elected county officials with experience with wind energy in eight US states, this paper asks how local officials understand the impacts of wind development, how local governments are involved in wind energy negotiations, how the resources and expertise needed to navigate negotiations are distributed among counties, and analyze the relationship between local capacity, access to resources, and involvement in negotiations. We find that local officials express simultaneously affective and material concerns with the impacts of wind development and see negotiations with the developer as central to realizing local benefits. However, the expertise and staffing needed to negotiate with developers is less accessible to poorer or sparsely populated counties, and counties with lower overall revenues have narrower scopes of negotiation, and counties incre. Our results suggest that uneven rural capacity heightens an already asymmetrical relationship between localities and developers. In analyzing how infrastructure developments are shaped by relationships between localities and developers that are conditioned by austerity and (under)capacity, this paper contributes to and bridges scholarly discussions on rural austerity, rescaling, and renewable energy transitions. These results challenge conventional wisdoms around centralizing energy siting processes, contextualize popular and academic debates about opposition to renewable energy development, and highlight the need for rural reinvestment to realize meaningfully participatory energy developments.

Elmallah, Salma↗
DOE OSTI2025

Corrigendum to ‘Under-capacitated and over-powered? Rural austerity and asymmetrical negotiating relationships in US wind energy development’ [J. Rural Stud., 119 (2025) 1–14]

The authors regret that there is an incomplete sentence in the abstract of the article, and request that the portion “, and counties incre” be deleted from the abstract (found at the end of the sentence beginning with “However …”). The portion to be deleted is underlined and bolded below. The authors would like to apologise for any inconvenience caused. Current abstract: Though rural local governments are central actors in renewable energy development, local governments in the United States (US) remain systematically under-funded. This paper considers what the manifestations of austerity in local governments broadly and rural localities specifically mean for renewable energy development and for energy transitions. Drawing on a survey of 262 elected county officials with experience with wind energy in eight US states, this paper asks how local officials understand the impacts of wind development, how local governments are involved in wind energy negotiations, how the resources and expertise needed to navigate negotiations are distributed among counties, and analyze the relationship between local capacity, access to resources, and involvement in negotiations. We find that local officials express simultaneously affective and material concerns with the impacts of wind development and see negotiations with the developer as central to realizing local benefits. However, the expertise and staffing needed to negotiate with developers is less accessible to poorer or sparsely populated counties, and counties with lower overall revenues have narrower scopes of negotiation, and counties incre. Our results suggest that uneven rural capacity heightens an already asymmetrical relationship between localities and developers. In analyzing how infrastructure developments are shaped by relationships between localities and developers that are conditioned by austerity and (under)capacity, this paper contributes to and bridges scholarly discussions on rural austerity, rescaling, and renewable energy transitions. These results challenge conventional wisdoms around centralizing energy siting processes, contextualize popular and academic debates about opposition to renewable energy development, and highlight the need for rural reinvestment to realize meaningfully participatory energy developments.

Elmallah, Salma↗