Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Approximate boundary”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Laser Doppler velocimeter system simulation for sensing aircraft wake vortices

A hydrodynamic model of aircraft vortex wakes in an irregular wind shear field near the ground is developed and used as a basis for modeling the characteristics of a laser Doppler detection and vortex location system. The trailing vortex sheet and the wind shear are represented by discrete free vortices distributed over a two-dimensional grid. The time dependent hydrodynamic equations are solved by direct numerical integration in the Boussinesq approximation. The ground boundary is simulated by images, and fast Fourier Transform techniques are used to evaluate the vorticity stream function. The atmospheric turbulence was simulated by constructing specific realizations at time equal to zero, assuming that Kolmogoroff's law applies, and that the dissipation rate is constant throughout the flow field. The response of a simulated laser Doppler velocimeter is analyzed by simulating the signal return from the flow field as sensed by a simulation of the optical/electronic system.

Thomson, J. A. L.↗
NASA NTRS1976

Simulation of three-dimensional separated flows with vortex filaments

A Lagrangian vorticity method for numerical simulation of three-dimensional separated flows with vortex filaments, about solid bodies, is discussed. The method is an extension of an earlier one for three-dimensional rotational flows away from solid boundaries e.g., jets, vortex rings, and aircraft trailing vortices after initial rollup. In this method an harmonic contribution to the velocity field is computed at each time step to ensure tangency of the velocity field at the boundary. The mechanics of the boundary layer are approximated with sufficient accuracy so that the separation lines are located correctly on the surface of the body.

Leonard, A.↗
NASA NTRS1978

Comparison of reusable insulation systems for cryogenically-tanked earth-based space vehicles

Three reusable insulation systems concepts were developed for use with cryogenic tanks of earth-based space vehicles. Two concepts utilized double-goldized Kapton (DGK) or double-aluminized Mylar (DAM) multilayer insulation (MLI), while the third utilized a hollow-glass-microsphere, loadbearing insulation (LBI). Thermal performance measurements were made under space-hold (vacuum) conditions for insulating warm boundary temperatures of approximately 291 K. The resulting effective thermal conductivity was approximately 0.00008 W/m-K (W = weight,Kg; m = measured; K = temperature) for the MLI systems (liquid hydrogen test results) and 0.00054 W/m-K for the LBI system (liquid nitrogen test results corrected to liquid hydrogen temperature).

Sumner, I. E.↗
NASA NTRS1978

Comparison of reusable insulation systems for cryogenically-tanked earth-based space vehicles

Three reusable insulation systems concepts have been developed for use with cryogenic tanks of earth-based space vehicles. Two concepts utilized double-goldized Kapton (DGK) or double-aluminized Mylar (DAM) multilayer insulation (MLI), while the third utilized a hollow-glass-microsphere, load-bearing insulation (LBI). All three insulation systems have recently undergone experimental testing and evaluation under NASA-sponsored programs. Thermal performance measurements were made under space-hold (vacuum) conditions for insulation warm boundary temperatures of approximately 291 K. The resulting effective thermal conductivity was approximately .00008 W/m-K for the MLI systems (liquid hydrogen test results) and .00054 W/m-K for the LBI system (liquid nitrogen test results corrected to liquid hydrogen temperature). The DGK MLI system experienced a maximum thermal degradation of 38 percent, the DAM MLI system 14 percent, and the LBI system 6.7 percent due to repeated thermal cycling representing typical space flight conditions. Repeated exposure of the DAM MLI system to a high humidity environment for periods as long as 8 weeks provided a maximum degradation of only 24 percent.

Sumner, I. E.↗
NASA NTRS1978

Transonic flow over the NACA 64A006 with an oscillating flap-calculations based on the Euler equations

Exploratory calculations of transonic flows over the airfoil with a quarter-chord oscillating flap were made using a program which obtains approximate solutions to the Euler equations with an explicit, shock-capturing, finite-difference scheme. The calculations, essentially inviscid and for the airfoil at zero angle-of-attack in a free-stream, are at Mach numbers and reduced frequencies which were tested in experiments by Tijdeman. The oscillatory lifts from analogus calculations by various investigators generally agree with one another better than they agree with Tijdeman's data. Inclusion in the calculations of an approximate modelling of boundary conditions expected at slotted wind tunnel walls tends to shift some of the results closer to the experimental values.

Magnus, R. J.↗
NASA NTRS1979

A fast Cauchy-Riemann solver

The inhomogeneous Cauchy-Riemann equations in a rectangle are discretized by a finite difference approximation. Several different boundary conditions are treated explicitly, leading to algorithms which have overall second-order accuracy. All boundary conditions with either u or v prescribed along a side of the rectangle can be treated by similar methods. The algorithms presented here have nearly minimal time and storage requirements and seem suitable for development into a general-purpose direct Cauchy-Riemann solver for arbitrary boundary conditions.

Ghil, M.↗
NASA NTRS1978

Three dimensional thermal pollution models. Volume 1: Review of mathematical formulations

A mathematical model package for thermal pollution analyses and prediction is presented. These models, intended as user's manuals, are three dimensional and time dependent using the primitive equation approach. Although they have sufficient generality for application at sites with diverse topographical features; they also present specific instructions regarding data preparation for program execution and sample problems. The mathematical formulation of these models is presented including assumptions, approximations, governing equations, boundary and initial conditions, numerical method of solution, and same results.

Lee, S. S.↗
NASA NTRS1982

Adaptive-wall wind-tunnel research at NASA-Ames Research Center

Adaptive wall wind tunnel research is summarized. Small scale two and three dimensional wind tunnel experiments and numerical experiments with a three dimensional adaptive wall simulator are included. A NACA 0012 airfoil was tested in a 25 by 13 cm slotted wall test section. Airflow through the test section walls was controlled by adjusting the pressures in segmented plenums. Interference free conditions were successfully attained in subsonic and transonic flows. For the three dimensional experiment, the 25 by 13 cm wind tunnel was modified to permit cross stream wall adjustments. The test model was a semispan wing mounted to one sidewall. Wall interference was substantially reduced at several angles of attack at Mach 0.60. A wing on wall configuration was also modeled in the numerical experiments. These flow simulations showed that free air conditions can be approximated by adjusting boundary conditions at only the floor and ceiling of the test section. No sidewall control was necessary. Typical results from these experiments are discussed.

Schairer, E. T.↗
NASA NTRS1982

Adaptive-wall wind-tunnel research at Ames Research Center

Adaptive-wall wind-tunnel research is summarized. This research includes small-scale two- and three-dimensional wind-tunnel experiments and numerical experiments with a three-dimensional adaptive-wall simulator. Airflow through the test-section walls is controlled by adjusting the pressures in segmented plenums. Interference free conditions are successfully attained in subsonic and transonic flows. An adaptive wall test section is constructed for the transonic wind tunnel. Wall interference was reduced in the three dimensional experiment at several angles of attack at Mach 0.60. A wing on wall configuration was modeled in the numerical experiments. These flow simulations showed that free air conditions can be approximated by adjusting boundary conditions at only the floor and ceiling of the test section. No sidewall control was necessary.

Schairer, E. T.↗
NASA NTRS1983

A numerical model of acoustic choking. I - Shock free solutions

The phenomenon of acoustic choking in near sonic flows is investigated using the one-dimensional gasdynamic equations for an ideal gas. It is pointed out that this approach eliminates the need to make the classical small disturbance assumption. A finite difference scheme is elaborated to approximate these equations. Boundary conditions that correctly model the physics of the acoustics problems are chosen. The use of a fast Fourier transform routine allows the results to be compared with those obtained by using the conventional harmonic assumptions. Only solutions in which shocks have not fully developed are reported. Continuous solutions are sought, and these are compared with the Fubini solution and with certain results of Myers and Callegari (1977, 1978, 1979).

Walkington, N. J.↗
NASA NTRS1984

Energy balance of stellar coronae. III - Effect of stellar mass and radius

A homologous transformation is derived which permits the application of the numerical coronal models of Hammer from a star with solar mass and radius to other stars. This scaling requires a few approximations concerning the lower boundary conditions and the temperature dependence of the conductivity and emissivity. These approximations are discussed and found to be surprisingly mild. Therefore, the scaling of the coronal models to other stars is rather accurate; it is found to be particularly accurate for main-sequence stars. The transformation is used to derive an equation that gives the maximum temperature of open coronal regions as a function of stellar mass and radius, the coronal heating flux, and the characteristic damping length over which the corona is heated.

Hammer, R.↗
NASA NTRS1986

Advances in numerical and applied mathematics

This collection of papers covers some recent developments in numerical analysis and computational fluid dynamics. Some of these studies are of a fundamental nature. They address basic issues such as intermediate boundary conditions for approximate factorization schemes, existence and uniqueness of steady states for time dependent problems, and pitfalls of implicit time stepping. The other studies deal with modern numerical methods such as total variation diminishing schemes, higher order variants of vortex and particle methods, spectral multidomain techniques, and front tracking techniques. There is also a paper on adaptive grids. The fluid dynamics papers treat the classical problems of imcompressible flows in helically coiled pipes, vortex breakdown, and transonic flows.

South, J. C., Jr.↗
NASA NTRS1987

Electromagnetic backscattering by plates and disks

With the recent development of diffraction coefficients for imperfectly conducting half-planes, it has become possible to analyze a wide variety of problems for which the impedance surface boundary condition applies. This impedance boundary condition, while approximate, was utilized to extend the usefulness of the Uniform Geometrical Theory of Diffraction (UTD) beyond the perfectly conducting geometries. These half-plane diffraction coefficients are used to analyze patterns of an antenna in the presence of an imperfectly conducting flat polygonal plate. The Geometrical Theory of Diffraction (GTD) techniques were also used to investigate the backscattering from perfectly conducting plates. To further improve the soft polarization results for wide angles, a model for the creeping wave or circulating current on the edge of the disk was obtained and used to find an additional component of the backscattered field. The backscattering from a square plate was then analyzed using GTD. Backscattering in both the principal and off-principal planes was examined.

Balanis, Constantine A.↗
NASA NTRS1987

Initial turbulence effect on jet evolution with and without tonal excitation

The effect of initial turbulence level on the development of a jet and on the susceptability of the jet to discrete tone excitation was experimentally investigated. Turbulence intensity was varied, over the range 0.15 to 5 percent, by using screens and grids placed upstream of an 8.8 cm diameter nozzle. Top-hat mean velocity profiles with approximately identical initial boundary layer states were ensured in all cases; the turbulence spectra were broadband. It was found, contrary to earlier reports, that the natural jet decay remained essentially unchanged for varying initial turbulence. For a fixed amplitude of the tonal excitation, increasing the initial turbulence damped out the growth of the instability wave; as a result, the excitability, assessed from the mean velocity decay on the axis, was found to diminish. However, the degree of damping in the amplification of the instability wave was only slight compared to the large increase in the initial turbulence. The jet with 5 percent turbulence could be measurably altered by excitation with a velocity perturbation amplitude as little as 0.25 percent of the jet velocity. The amplitude effect data indicate an upper bound of the extent to which a jet could be excited, and thus its plume shortened, by the plane wave, single frequency excitation. An additional data set with no grid or trip, yielding a nominally laminar boundary layer, re-emphasizes the profound effect of initial boundary layer state on jet evolution as well as on its excitability. This jet decayed the fastest naturally, and consequently, it was the least excitable in spite of its turbulence being the least.

Raman, G.↗
NASA NTRS1986

Numerical and physical aspects of aerodynamic flows III; Proceedings of the Third Symposium, California State University, Long Beach, CA, January 21-24, 1985

The present symposium considers hydrodynamic stability and turbulent transition, transition calculations in three-dimensional flows, a quasi-simultaneous finite difference approach for strongly interacting flows, the significance of the thin layer Navier-Stokes approximation, unsteady airfoil boundary layers, predictions and experiments on airfoils at low Reynolds numbers, and a comparison of interactive boundary layer and thin layer Navier-Stokes procedures. Also discussed are a viscous-inviscid interaction method for computing unsteady transonic separation, massive separation and dynamic stall on a cusped trailing edge airfoil, the computation of turbulent separated flows over wings, an iterative scheme for three-dimensional transonic flows, and the computation of three-dimensional flows with shock wave/boundary layer interaction. Many of the papers in this symposium were abstracted previously (cf., A85-42951).

Cebeci, T.↗
NASA NTRS1987

Initial turbulence effect on jet evolution with and without tonal excitation

The effect of initial turbulence level on the development of a jet and on the susceptibility of the jet to discrete tone excitation was experimentally investigated. Turbulence intensity was varied, over the range 0.15 to 5 percent, by using screens and grids placed upstream of an 8.8 cm diameter nozzle. Top-hat mean velocity profiles with approximately identical initial boundary layer states were ensured in all cases; the turbulence spectra were broadband. It was found, contrary to earlier reports, that the natural jet decay remained essentially unchanged for varying initial turbulence. For a fixed amplitude of the tonal excitation, increasing the initial turbulence damped out the growth of the instability wave; as a result, the excitability, assessed from the mean velocity decay on the axis, was found to diminish. However, the degree of damping in the amplification of the instability wave was only slight compared to the large increase in the initial turbulence. The jet with 5 percent turbulence could be measurably altered by excitation with a velocity perturbation amplitude as little as 0.25 percent of the jet velocity. The amplitude effect data indicate an upper bound of the extent to which a jet could be excited, and thus its plume shortened, by the plane wave, single frequency excitation. An additional data set with no grid or trip, yielding a nominally laminar boundary layer, re-emphasizes the profound effect of initial boundary layer state on jet evolution as well as on its excitability. This jet decayed the fastest naturally, and consequently, it was the least excitable in spite of its turbulence being the least.

Raman, G.↗
NASA NTRS1988

Carbon monoxide over the Amazon Basin during the 1985 dry season

During the Amazon Boundary Layer Experiment, approximately 100 hours of in situ carbon monoxide measurements were obtained using a tunable diode laser sensor that provided continuous, fast-response (about 1 s) measurements. This data set, taken on board the NASA Electra between July 12 and August 12, 1985, characterizes the temporal and spatial changes in the CO distribution over the Amazon Basin as meteorological conditions progressed from the early to middle phases of the 1985 day season. Early dry-season CO values of 75-95 ppbv were generally observed in the PBL. As the dry season became well established, biomass burning and a persistent capping inversion at about 3 km profoundly altered the CO distribution, with PBL values typically reaching 150-275 ppbv. Concentrations as high as 800 ppbv were measured within identifiable haze layers. An analysis of satellite imagery shows that biomass burning was occurring along the Amazon River system and in savannah areas located more than 1000 km south of the region sampled.

Sachse, G. W.↗
NASA NTRS1989

Numerical simulation of viscous vortex rings

Vortex interactions and their role in turbulent flow are examined. The objectives are twofold. First, to use the existing axisymmetric code to study the annihilation process of colliding vortex rings and determine the relevance of this problem to similar 3-D phenomena. The second objective is to extend the code to three dimensions. The code under development is unique in that it can compute flows in a truly infinite domain (i.e., without periodic boundary conditions or approximations from truncating the domain). Because of this, the far field sound can be computed, and therefore, contribute to improved models of turbulence generated noise for this class of flows. Issues which can be addressed by the code include: effects of viscosity on mode selection in azimuthal breakdown of vortex rings (i.e., the Widnall instability); reconnection, the associated production of small scales, and the time scale of the process.

Stanaway, Sharon Kay↗