Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AUTOCLAVES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Automated Ply-by-Ply Lamination and In-Situ Consolidation of Thermoplastic Composite High-Contour Stiffeners for High-Rate Aircraft Manufacturing

To meet the future demand of the commercial aircraft market, composite aircraft manufacturing rates must significantly increase. NASA’s Hi-Rate Composites Aircraft Manufacturing (HiCAM) program addresses this need to advance aircraft composite manufacturing technologies. Thermoplastic composites offer a promising solution to these manufacturing demands and present an opportunity for Northrop Grumman to bring the benefits of its Automated Stiffener Forming (ASF) technology to thermoplastic processing. Within HiCAM, Northrop Grumman is evolving the ASF technology for ply-by-ply, in-situ processing of thermoplastic composite materials. The modular process accommodates flexibility in the laminate stacking, while allowing for ply drops, ply additions, and yaw, pitch, and roll in the laminate geometry. To adapt the ASF process for thermoplastics, heating technologies and roller compaction processes were investigated by manufacturing flat test coupons. These panels were evaluated by photo-microscopy, non-destructive inspection, and short beam shear tests and results were compared against baseline autoclave coupons. The results of the laminates fabricated via ASF are presented.

out of autoclave↗

Development of oxygen sensors for use in liquid metal

For generation IV reactor concepts, based on liquid metal cooling, there is a need for robust oxygen sensors which can be used in the core of the reactor since corrosion can only be kept sufficiently low by controlling the dissolved oxygen content in the liquid metal. A robust, ceramic membrane type sensor has been developed at IFE/Halden (Norway) and tested in an autoclave system at KTH (Sweden). The sensor has been tested in lead-bismuth at 550 deg. C and performed well. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Characterization of Simulated BWR and Steam Exposed FeCrAl Coated Zircaloy 2

To combat the rapid oxidation that occurs in nuclear reactors during transient scenarios, investigations into modifying or replacing the existing zirconium based cladding and structural material have become a focus. Aside from testing these alternatives in the transient scenarios, verification of performance under normal operation is necessary. This work will examine the effect of normal BWR water chemistry over two time periods on FeCrAl coated Zircaloy 2 (Zry2) and its response to high temperature steam. X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Energy-dispersive X-ray Spectroscopy (EDS), and Thermogravimetric (TG) analysis are utilized to analyze the chemical and physical changes caused by these exposures. These tests show that under short time periods, normal water chemistry BWR conditions do not adversely change the effectiveness of a FeCrAl coating. A spinel structure was formed using Ni from an external source, however it did not have a major impact on the coatings performance in high temperature steam. Additional autoclave exposures up to 40 hours are ongoing, including coatings which were proton irradiated up to 5 dpa. (authors)

36 MATERIALS SCIENCE↗

Following Solid-Acid-Catalyzed Reactions by MAS NMR Spectroscopy in Liquid Phase -Zeolite-Catalyzed Conversion of Cyclohexanol in Water

The catalytic conversion of cyclohexanol on zeolite HBEA in hot liquid water leads to dehydration as well as alkylation products. A novel micro autoclave suitable for application in MAS NMR at high temperatures and pressures is developed and successfully applied to obtain new insight into the mechanistic pathway leading to an understanding of the reactions under selected experimental conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A custom 3D printed paddlewheel improves growth in flat panel photobioreactor

One of the main challenges with using flat panel photobioreactors for algal growth is uneven mixing and settling of cells in corners, especially when bubbling is the only method used for mixing. Here, in order to improve mixing in our flat panel reactor, we designed a custom paddlewheel. Paddlewheels are frequently used in outdoor algae raceway ponds to improve mixing and we are taking advantage of the same principle for mixing in the reactor. The paddlewheel is easily integrated into our PSI FMT150 1‐L flat panel photobioreactor and is printed on a 3D printer using high temperature poly lactic acid (HT‐PLA). With the inclusion of an annealing step, the paddlewheel is autoclavable. Addition of the paddlewheel in the reactor minimized cell settling and improved algal growth, as evidenced by a nearly 40% increase in oxygen production rates. Nutrient dispersion and utilization in the culture was also improved as evidenced by a corresponding 38% decrease in CO 2 concentration. The paddlewheel device presented here is a cost‐effective method for improving algal growth in a flat panel photobioreactor.

09 BIOMASS FUELS↗

Preozonation of primary-treated municipal wastewater for reuse in biofuel feedstock generation

The results of a laboratory scale investigation on ozone pretreatment of primary-treated municipal wastewater for potential reuse in fermentation processes for the production of biofuels and bio-based feedstock chemicals were presented. Semi-batch preozonation with 3.0% (w/w) ozone at 1 L min -1 resulted into a considerable inactivation of the indigenous heterotrophic bacteria in the wastewater with less than 0.0002% comprising the ozone-resistant fraction of the microbial population. The disinfection process was modeled using first-order inactivation kinetics with a rate constant of 4.39 10 -3 s -1. Chemical oxygen demand (COD) levels were reduced by 30% in 1-h experiments. COD depletion was also modeled using a pseudo-first-order kinetics at a rate constant of 9.50 10 -5 s -1. Biological oxygen demand (BOD 5) values were reduced by 60% up to 20 min of ozonation followed by a plateau and some slight increases attributed to partial oxidation of recalcitrant materials. Ozone also had no substantial effect on the concentration of ammonium and phosphate ions, which are essential for microbial growth and metabolism. Preliminary tests indicated that oleaginous microorganisms could be cultivated in the ozonated wastewater, resulting in relatively higher cell densities than in raw wastewater and comparable results with autoclave-sterilized wastewater. This process could potentially produce significant quantities of oil for biofuel production from municipal wastewater streams.

biofuels, kinetics, municipal wasterwater, ozone↗

Addition of gaseous olefin to produce boiler fuel and stability studies

As a renewable liquid fuel, bio‐oil produced from fast pyrolysis of biomass is receiving increasing attention. However, bio‐oil has some negative properties, such as polymerization over time, high water content, high viscosity, and low energy value. It must be upgraded to be used as a fuel. The objective of this study was to develop an upgrading method by esterification and olefination reactions to produce bio‐oil with lower water content and higher energy value for combustion as a boiler fuel. Loblolly pine wood was pyrolyzed at a feed rate of ∼7 kg/h in a Mississippi State University proprietary auger reactor to produce bio‐oil with 65% yield. Upgrading reactions were performed in a high‐pressure batch autoclave. Bio‐oil was reacted with alcohols and gaseous olefins in the presence of a heterogeneous catalyst to produce upgraded bio‐oil. The influence of reaction conditions such as reaction time, reaction temperature, and catalyst content were evaluated. Physical and chemical properties such as acid value, higher heating value, water content, and optimal conditions were identified. The result of olefination shows improved bio‐oil quality and increased energy density. Accelerated aging tests were also performed. © 2014 American Institute of Chemical Engineers Environ Prog, 2014 34: 933–941, 2015

Tao, Jingming↗

CO 2 -induced chemo-mechanical alteration in reservoir rocks assessed via batch reaction experiments and scratch testing

Here, the injection of carbon dioxide (CO 2 ) into geological formations results in a chemical re-equilibration between the mineral assemblage and the pore fluid, with ensuing mineral dissolution and re-precipitation. Hence, target rock formations may exhibit changes of mechanical and petrophysical properties due to CO 2 exposure. We conducted batch reaction experiments with Entrada Sandstone and Summerville Siltstone exposed to de-ionized water and synthetic brine under reservoir pressure (9–10 MPa) and temperature (80°C) for up to four weeks. Samples originate from the Crystal Geyser field site, where a naturally occurring CO 2 seepage alters portions of these geologic formations. We conducted micro-scratch tests on rock samples without alteration, altered under laboratory conditions, and naturally altered over geologic time. Scratch toughness and hardness decrease as a function of exposure time and water salinity up to 52% in the case of Entrada and 87% in the case of Summerville after CO 2 -induced alteration in the laboratory. Imaging of altered cores with SEM-EDS and X-ray microCT methods show dissolution of carbonate and silica cements and matrix accompanied by minor dissolution of Fe-oxides, clays, and other silicates. Parallel experiments using powdered samples confirm that dissolution of carbonate and silica are the primary reactions. The batch reaction experiments in the autoclave utilize a high fluid to rock volume ratio and represent an end member of possible alteration associated with CO 2 storage systems. These types of tests serve as a pre-screening tool to identify the susceptibility of rock facies to CO 2 -related chemical-mechanical alteration during long-term CO 2 storage.

54 ENVIRONMENTAL SCIENCES↗

Effect of pH on hydrogen pick-up and corrosion in zircaloy-4

Thermal Desorption Spectroscopy (TDS) has been used to investigate the hydrogen pick-up behaviour in different samples of Zircaloy-4. This includes as-received, cold rolled, hydrogen charged, and autoclave-oxidised in pure water and at an elevated pH (with 50% deuterated water) compared to commercial reactors. A characteristic desorption peak for hydrogen has been found at about 650 Celsius degrees, which is theorised to come from hydrides. Cold rolled samples show the same general shape spectrum as the as-received samples, with more hydrogen detected per unit volume of sample. This suggests more hydrogen is in trapping sites or outward diffusion paths are facilitated by dislocations, since no more hydrogen has been added. The peak broadens towards higher temperature, which indicates that additional dislocations could provide trapping sites with a slightly higher energy than the average in the as-received samples. The hydrogen charged samples form a hydride rim, which contains much more hydrogen than the as-received samples. The peak broadens but on average does not shift. The surface oxide, when present, acts as a barrier to the desorption of hydrogen, until the temperature rises enough for the oxygen to migrate into the bulk. The oxide itself only contains a small amount of hydrogen, as is evidenced when the oxide layer is removed, whereupon the desorption peak returns to the characteristic shape seen in as-received samples. Samples oxidised in pure water exhibit a slightly higher oxidation rate, and pass through kinetic transition much earlier than samples exposed to an elevated pH. Before transition pH has little effect on the hydrogen pick-up. After transition the hydrogen pick-up is much higher in pure water, which implies that the H{sup +} concentration in the environment affects hydrogen pickup at this stage. The elevated pH samples showed peaks for D-H and D{sub 2}, which follow the H{sub 2} peaks. The hydrogen content in these samples increases at around 70% of the time to the first transition. This may correlate with development of through-thickness percolation paths, which could lead to the pH inside cracks being modified to a lower value, increasing the availability of H{sup +} ions. (authors)

36 MATERIALS SCIENCE↗

Characterization of the Hydrothermal Corrosion Behavior of Ceramics for Accident Tolerant Fuel Cladding

Accident-tolerant fuel (ATF) is an increasingly important research topic for the nuclear industry, and ceramics such as SiC are strong contenders for deployment as ATF cladding. The hydrothermal corrosion characteristics of SiC and Al2O3 were investigated via constantly-refreshing autoclave corrosion and post exposure characterization. Four different types of chemical vapor deposited (CVD) SiC specimens were examined (two with high electrical resistance, one with low electrical resistance, and a single crystal 4H structural variant). Al2O3 specimens were prepared in single crystal and polycrystalline states. PWR primary water, BWR–HWC, and BWR–NWC environments were maintained throughout the experiments. Characterization conducted using SEM and EDS was used to determine factors affecting corrosion rates and susceptibility to grain boundary attack in each water chemistry condition. Raman spectroscopy was also used to determine chemical variation of the surface with corrosion. Grain boundary attack was found to be significant for both alumina and SiC polycrystalline variants.

Doyle, Peter↗

Compatibility of Wrought Superalloys with Supercritical CO2

Supercritical CO2 (sCO2) power cycles, particularly direct-fired cycles, have the possibility of revolutionizing clean fossil energy with peak temperatures above 700 °C and wrought precipitation strengthened alloys like Haynes 282™ for structural components. At temperatures <650 °C, it would be desirable to use less expensive alloys, however, steels are known to be susceptible to carburization. Laboratory 300 bar sCO2 autoclave results were collected on a range of alloys including less expensive Ni-based alloys like 825 compared to advanced austenitic steels like alloy 709 at 600 °C. Both alloys 825 and 709 formed thin, protective Cr-rich oxides after 1,000 h. Alloy 825 also was exposed for 1,000 h in sCO2 at 800 °C and compared to a range of Ni-based alloys. Comparing alloys 625, 825, and 282, the mass gain increased with increasing alloy Ti content under these conditions. High Al superalloys did not perform significantly better under these conditions at 800 °C.

Pint, Bruce↗

Progressing Zirconium-Alloy Corrosion Models Using Synchrotron XANES

The corrosion and hydrogen pickup of in-reactor zirconium-based cladding is currently limiting the maximum fuel burnup in light-water reactors. Since the oxidation rate and hydrogen pickup fraction of zirconium alloys vary significantly as a function of exposure time, burnup, and alloy composition, it is critical to better understand the underlying mechanisms to model and predict corrosion behavior. Following the analysis of ~500 autoclave coupons, a physically based zirconium-alloy corrosion model founded on first principles, named “Coupled Current Charge Compensation (C4)”, has been developed. The model reproduces the differences in oxidation kinetics and hydrogen pickup between different zirconium alloys, such as Zr-Nb and Zircaloy-4. Since oxidized solute elements affect the corrosion process through a space-charge compensation mechanism, synchrotron nano-beam X-ray Absorption Near-Edge Spectroscopy has been performed on multiple oxidized Zr-Nb alloys to determine the oxidation-state profile of niobium in the oxide layer. The results inform the C4 model and the associated hydrogen pickup fraction.

C4 Model↗

Manufacturing demonstration of microbially mediated zinc sulfide nanoparticles in pilot-plant scale reactors

The thermophilic anaerobic metal-reducing bacterium Thermoanaerobacter sp. X513 efficiently produces zinc sulfide (ZnS) nanoparticles (NPs) in laboratory-scale ( ≤24-L) reactors. To determine whether this process can be up-scaled and adapted for pilot-plant production while maintaining NP yield and quality, a series of meso-scale experiments were performed using 100-l and 900-l reactors. Pasteurization and N 2 -sparging replaced autoclaving and boiling for deoxygenating media in the transition from small-scale to pilot-plant reactors. Consecutive 100-L batches using new or recycled media produced ZnS NPs with highly reproducible ~2 nm average crystallite size (ACS) and yields of ~0.5g L -1 , similar to small-scale batches. The 900-L pilot plant reactor produced ~ 320 g ZnS without process optimization or replacement of used medium; this quantity would be sufficient to form a ZnS thin film with ~120 nm thickness over 0.5 m width 13 km length. At all scales, the bacteria produced significant amounts of acetic, lactic and formic acids, which could be neutralized by the controlled addition of sodium hydroxide without the use of an organic pH buffer, eliminating 98% of the buffer chemical costs. In conclusion, the final NP products were characterized using XRD, ICP-OES, FTIR, DLS, and C/N analyses, which confirmed the growth medium without organic buffer enhanced the ZnS NP properties by reducing carbon and nitrogen surface coatings and supporting better dispersivity with similar ACS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Promising Technology for Reprocessing Complex Uranium Ores from the Elkon Deposit

The results of research on reprocessing of complex uranium ores from the Elkon deposit with recovery of uranium, gold, silver, and vanadium by methods of radiometric sorting, combining of autoclave and atmospheric leaching of ore followed by sorption and extraction recovery of valuable components, are presented. The capacity was 90 mg/g in sorption of uranium on strongly basic anionite and the uranium concentration ≤0.003 g/dm{sup 3} in sorption filtrates. The choice of eluent is determined by the formulation of the problem of obtaining the finished uranium product of the requisite form and quality. A fundamentally new composition of the extracting agent is proposed for direct extraction of uranium from nitrate-containing solutions. An iron-vanadium concentrate with vanadium and iron content 2.58 and 22.8%, respectively, suitable for subsequent reprocessing, was obtained. The anionite PuroGold S-992 is recommended for recovery of gold and silver. The gold and silver concentrations in the commercial desorbate were 270 and 380 mg/dm{sup 3}, respectively; a gold-containing concentrate was obtained.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The Impact of Impurities on Alloy Behavior in Supercritical CO 2 at 700 °C

As part of round robin testing, specimens of commercial alloys 316, 120, 625, and 740 were exposed to 20 MPa research grade CO 2 at 700 °C for up to 1500 h. The first set of specimens had higher mass gain likely due to impurities not flushed from the autoclave at startup. After this issue was corrected, an identical set of specimens exhibited lower mass gains for both the Fe- and Ni-based alloys. The differences in reaction products were characterized to understand the effect of impurities under these conditions. As suggested by the mass change, thicker oxides were formed in each case, primarily for the Fe-based alloys. Furthermore, for the Ni-based alloys, the difference was primarily in the transient stage of oxidation with no change in rate constant. Alloy 120 exhibited increased internal attack, and differences in the scale phases formed were characterized to better understand the effect of impurities. Alloy 740 primarily exhibited a greater depth of internal attack in the first run.

36 MATERIALS SCIENCE↗

Oxidation Behavior of Carbon Steel: Effect of Formation Temperature and pH of the Environment

The nature of surface oxide formed on carbon steel piping used in nuclear power plants affects flow-accelerated corrosion. In this investigation, carbon steel specimens were oxidized in an autoclave using demineralized water at various temperatures (150-300 °C) and at pH levels (neutral, 9.5). At low temperatures (< 240 °C), weight loss of specimens due to dissolution of iron in water occurred to a greater extent than weight gain due to oxide formation. With the increase in temperature, the extent of iron dissolution reduced and weight gain due to oxide formation increased. A similar trend was observed with the increase in pH as was observed with the increase in temperature. XRD and Raman spectroscopy confirmed the formation of magnetite. The oxide film formed by precipitation process was negligible at temperatures from 150 to 240 °C compared to that at higher temperatures (> 240 °C) as confirmed by scanning electron microscopy. Electrochemical impedance measurement followed by Mott–Schottky analysis indicated an increase in defect density with exposure duration at 150 °C at neutral pH but a low and stable defect density in alkaline environment. The defect density of the oxide formed at neutral pH at 150-300 °C was always higher than that formed in alkaline environment as reported in the literature.

36 MATERIALS SCIENCE↗

Effect of Air and Argon Sintering Atmospheres on Properties and Hydrothermal Aging Resistance of Y-TZP Ceramics

In this work, we investigated the role of sintering atmosphere and temperature on low-temperature degradation of 3 mol.% yttria tetragonal zirconia polycrystals ceramics. Green compacts were prepared by die-pressing followed by cold isostatic pressing at 200 MPa. The green bodies were sintered between the temperature range of 1250 and 1500 °C in air and argon gas atmosphere. Sintered samples were tested to determine bulk density, Young’s modulus, Vickers hardness and fracture toughness. The results revealed that the mechanical properties of air-sintered samples were better than that of argon-sintered samples sintered at 1400 °C and below while the argon sintering marginally improves the fracture toughness and hardness when sintered at 1450 °C and above. FESEM images showed that the tetragonal grain size was similar when sintered in argon atmosphere. However, regardless of sintering atmosphere, grain growth was inevitable as the sintering temperature was increased. Hydrothermal aging test in superheated steam was performed in an autoclave at temperature of 180 °C and 10 bar pressure up to 12 h. Effect of aging on tetragonal-to-monoclinic phase transformation was measured by using x-ray diffraction. The phase transformation was found to be strongly influenced by the sintering temperature and sintering atmosphere. The sample sintered at 1500 °C in argon atmosphere exhibited rapid phase transformation compared to air atmosphere, while the samples sintered at or below 1400 °C in argon showed no phase transformation after 12-h exposure in steam environment.

36 MATERIALS SCIENCE↗

Corrosion Mechanism and Applicability Assessment of N80 and 9Cr Steels in CO{sub 2} Auxiliary Steam Drive

Corrosion tests were conducted in a high-temperature high-pressure (HTHP) autoclave to simulate the conditions of CO{sub 2} auxiliary steam drive in gas injection wells. Weight loss tests were performed with the sheets of N80 and 9Cr steels under the testing conditions. The morphology and composition of corrosion products were explored by SEM, EDS, XRD and XPS. The corrosion resistance of 9Cr steel was better than that of N80 steel under the testing conditions. The corrosion rates of N80 and 9Cr met the application requirements in CO{sub 2} auxiliary steam drive. The results broke the constraint in ISO-15156 standards. The corrosion process of N80 steel was mainly affected by the flow velocity. However, the corrosion process of 9Cr steel was mainly affected by temperature. The corrosion resistance of 9Cr steel depended on the FeCO{sub 3} content of Cr-rich layer, which was closely related to temperature. The low flow velocity influenced the diffusion process of N80 steel corrosive ions, whereas the high flow velocity influenced the integrity of corrosion scales. Considering the influence of flow velocity on the corrosion of tubing and casing, in the gas injection well, 9Cr steel and N80 steel were, respectively, selected as the materials of tubing and casing.

36 MATERIALS SCIENCE↗