Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “APEX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1962

Monte Carlo Calculations of Neutron Number Spectra and Buildup Factors in Infinite Conical Configurations

A Monte Carlo code simulating neutron transport in infinite cones of water and water-equivalent hydrogen was prepared for an IBM 704 computer. The code was essentially a modification of the point-source, infinite-medium code used in NASA TN D-850. Studies were made of differential neutron number spectra and associated buildup factors for infinite cones having apex half-angles of 15 degrees, 30 degrees, 45 degrees, and 60 degrees. The buildup factors obtained were compared with those for the appropriate infinite medium, which allowed an examination of the effect of solid angle subtended by material on the transport of 6-Mev source neutrons emanating from the cone apex. The variation of number buildup factor with distance for the various cones shows that neutron scattering out of the cones is predominant in the first 30 t o 40 centimeters of material, and that transport beyond this distance is of a similar nature in all the cones.

CONE↗
NASA NTRS1963

The Annual Variation in the Radiant Distribution of Sporadic Meteors

Meteor data obtained from the Southern Hemisphere confirm that the strengths of the helion, apex and antihelion sources of sporadic meteor activity are in the ratio 2 :1 : 2 when averaged over a whole year. During the year the helion and anti-helion source strengths vary from 0.8 to 4.0 times that of the apex.

SPORADIC METEOR↗
NASA NTRS1974

Contact and crack problems for an elastic wedge

The contact and the crack problems for an elastic wedge of arbitrary angle are considered. The problem is reduced to a singular integral equation which, in the general case, may have a generalized Cauchy kernel. The singularities under the stamp as well as at the wedge apex were studied, and the relevant stress intensity factors are defined. The problem was solved for various wedge geometries and loading conditions. The results may be applicable to certain foundation problems and to crack problems in symmetrically loaded wedges in which cracks initiate from the apex.

Erdogan, F.↗
NASA NTRS1976

Computer measurement and representation of the heart in two and three dimensions

Methods for the measurement and display by minicomputer of cardiac images obtained from fluoroscopy to permit an accurate assessment of functional changes are discussed. Heart contours and discrete points can be digitized automatically or manually, with the recorded image in a video, cine, or print format. As each frame is digitized it is assigned a code name identifying the data source, experiment, run, view, and frame, and the images are filed for future reference in any sequence. Two views taken at the same point in the heart cycle are used to compute the spatial position of the ventricle apex and the midpoint of the aortic valve. The remainder of the points on the chamber border are corrected for the linear distortion of the X-rays by projection to a plane containing the chord between the apex and the aortic valve center and oriented so that lines perpendicular to the chord are parallel to the image intensifier face. The image of the chamber surface is obtained by generating circular cross sections with diameters perpendicular to the major chord. The transformed two- and three-dimensional imagery can be displayed in either static or animated form using a graphics terminal.

Rasmussen, D.↗
NASA NTRS1976

Phase relationship in three-phase composites which include a void phase

The paper shows the relationship among polymer, particles, and voids in a three-phase composite and how some of the properties of a composite may be changed by changing the proportions of the phases. The three-phase composite is an aggregate of microspheres bonded together with a small amount of polymer which may not form a continuous matrix. The void space (third phase) is obtained by limiting the amount of polymer which is mixed with the microspheres. A ternary phase diagram is used to show the proportional relationship among the three phases, with each apex representing a volume fraction of unity for a constituent while the side opposite the apex represents a volume fraction of zero for that constituent. The vertical dimension represents some composite property such as density or strength. The effect of composition on composite properties is shown by plotting them on a binary phase diagram which represents a perpendicular plane coincident with the 0.60 volume fraction microsphere line.

Price, H. L.↗
NASA NTRS1977

Comments regarding energy release and transfer in solar flares

Skylab observations of the high-temperature coronal plasma are used in characterizing energy released in the corona during flare-like events. The loop structure of the soft X-ray flare features is reviewed; short-term exposures of several soft X-ray images are employed in suggesting that energy, and possibly material as well, is added to the apex of loop systems during flare events. An accompanying restriction in the flow of mass and energy from the loop apex is also hypothesized to account for the recorded observations. Further investigations of the confining ability of the magnetic fields that contain the X-ray emitting plasma are proposed.

Vorpahl, J. A.↗
NASA NTRS1983

The Ponta Grossa Arch: A proposal for ts configuration and evolution from the interpretation of remote sensing data

Visual analysis of MSS imagery was used to construct a map of dikes in a wide area of the Ponta Grossa Arch both in the Parana Basin and its basement. Analysis of the map by photographic methods defined the zone of highest density of the dikes, and some aspects of the longitudinal and transverse heterogeneities, as well as localized the apex of the Arch. Borders of the Arch were also suggested. Field investigations confirmed the position of the apex of the flexure on Palezoic sediments and pre-lava Mesozoic sediments. Controversial aspects of the relative absence of dikes in certain units or lithologies and the composition of intrusions surrounding the city of Castro were observed. The apparent synchronism between the activity of the Parana Basin and the Arch is discussed as well as the frequent inverse characteristics of vertical movements. The similarity of rocks in Brazil and Africa is also considered.

Parada, N. D. J.↗
NASA NTRS1984

Three-dimensional structures of two solar active regions from VLA observations at 2, 6, and 20 centimeter wavelengths

Three-dimensional structures of two active region groups are determined from observations with the Very Large Array (VLA) at 2, 6, and 20 cm. One of the groups exhibits a single magnetic loop of length approximately 10 to the 10th cm. The 2 cm radiation is mostly thermal bremsstrahlung and originates from the footprints of the loop. The 6 and 20 cm radiation is dominated by low-harmonic gyroresonance radiation and originates from the upper portion of the legs or the top of the loop. The loop broadens toward the apex. The top of the loop is not found to be the hottest point, but two temperature maxima on either side of the loop apex are observed, which is consistent with the model proposed for long loops. From 2 and 6 cm observations it can be concluded that the electron density and temperature cannot be uniform in a plane perpendicular to the axis of the loop; the density should decrease away from the axis of the loop.

Shevgaonkar, R. K.↗
NASA NTRS1984

Voyager photometry of Iapetus

Voyager images of Saturn's satellite Iapetus ranging in phase angle from 8 to 90 deg have been used to define the satellite's photometric properties and construct an albedo map of its surface. Iapetus shows variations in reflectance across its surface of a factor of 10 to 20, the greatest albedo range known for a solar system object. It is darkest at the apex of orbital motion, becomes brighter away from the apex, and is brightest near the poles. The 'boundary' between light and dark material is gradual rather than sharp. The photometric properties of the surface are adequately described by a lunarlike photometric function, but the surface phase function varies with albedo. The dark material on Iapetus is reddish, the bright material somewhat less so.

Squyres, S. W.↗
NASA NTRS1986

Three dimensional structures of solar active regions

Three dimensional structure of an active region is determined from observations with the Very Large Array (VLA) at 2, 6, and 20 cm. This region exhibits a single magnetic loop of length approx. 10 to the 10th power cm. The 2 cm radiation is mostly thermal bremsstrahlung and originates from the footpoints of the loop. The 6 and 20 cm radiation is dominated by the low harmonic gyroresonance radiation and originates from the upper portion of the legs or the top of the loop. The loop broadens toward the apex. The top of the loop is not found to be the hottest point, but two temperature maxima on either side of the loop apex are observed, which is consistent with the model proposed for long loops. From 2 and 6 cm observations it can be concluded that the electron density and temperature cannot be uniform in a plane perpendicular to the axis of the loop; the density should decrease away from the axis of the loop.

Kundu, M. R.↗
NASA NTRS1986

Time-dependent numerical modeling of dust halo formation at comets

The evolution of gas and dust distributions following a spatially and temporally localized comet outburst was calculated using a hybrid kinetic-hydrodynamic method. In the inner coma the time-dependent continuity, momentum, and energy equations of the dusty gas flow were solved simultaneously using 12 dust sizes. Beyond 300 km a three-dimensional kinetic model was used to calculate the trajectory of each individual dust grain. It was found that following the onset of the comet outburst a gas-dust blast wave propagates outward in the inner coma. About 15 minutes after the increased gas and dust production was initiated at the nucleus, a new equilibrium was reached in the inner coma. The most important feature of this new steady state was the significant increase of the dust terminal velocities. These higher terminal velocity values resulted in larger apex distances for dust particles emitted during the outburst. The dust particles spend a relatively long time near their apex points; therefore, the outburst generates long-lasting distinct dust envelopes in front of the regular dust coma.

Gombosi, T. I.↗
NASA NTRS1989

Inception length to a fully-developed fin-generated shock wave boundary-layer interaction

An experimental study of fin-generated shock wave turbulent boundary-layer interactions confirmed previous observations that, sufficiently far from the fin apex, such interactions become conical. The inception length to conical symmetry was found to increase weakly with Mach number for Mach numbers from 2.5 to 4 and fin angles from 4 to 22 deg. For the range of interactions examined, the inception length was found to depend primarily upon the inviscid shock angle, this angle ranging from 21 to 40 deg. The behavior of the inception length with shock angle can be broadly divided into two categories. For 'weak' interactions with shock angles less than about 35 deg, the inception length decreased as the shock angle increased. For 'strong' interactions with shock angles greater than about 35 deg, the inception region was small and was approximately constant at three boundary-layer thicknesses in length. In the latter, strong interaction case, the inception length was an order of magnitude smaller than that found in the weakest interactions examined, to the extent that strong interactions were practically fully-developed from the apex.

Lu, Frank K.↗
NASA NTRS1989

Low-latitude zonal and vertical ion drifts seen by DE 2

Horizontal and vertical ion drift data from the DE 2 spacecraft have been used to determine average zonal and vertical plasma flow (electric field) characteristics in the +/- 26-deg dip latitude region during a time of high solar activity. The 'average data' local time profile for an apex height bin centered at 400 km indicates westward plasma flow from 0600 to 1900 solar local time ((SLT) with a maximum westward velocity of 80 m/s in the early afternoon. There is a sharp change to eastward flow at approximately 1900 hours with an early evening peak of 170 m/s. A secondary nighttime maximum exists at 0430 SLT preceeding the reversal to westward flow. This profile is in good agreement with Jicamarca, Peru, radar measurements made under similar solar maximum conditions. Haramonic analysis indicates a net superrotation which is strongest at lower apex altitudes. The diurnal term is dominant, but higher order terms through the quatradiurnal are significant.

Coley, W. R.↗
NASA NTRS1990

Autonomous power expert fault diagnostic system for Space Station Freedom electrical power system testbed

The goal of the Autonomous Power System (APS) program is to develop and apply intelligent problem solving and control to the Space Station Freedom Electrical Power System (SSF/EPS) testbed being developed and demonstrated at NASA Lewis Research Center. The objectives of the program are to establish artificial intelligence technology paths, to craft knowledge-based tools with advanced human-operator interfaces for power systems, and to interface and integrate knowledge-based systems with conventional controllers. The Autonomous Power EXpert (APEX) portion of the APS program will integrate a knowledge-based fault diagnostic system and a power resource planner-scheduler. Then APEX will interface on-line with the SSF/EPS testbed and its Power Management Controller (PMC). The key tasks include establishing knowledge bases for system diagnostics, fault detection and isolation analysis, on-line information accessing through PMC, enhanced data management, and multiple-level, object-oriented operator displays. The first prototype of the diagnostic expert system for fault detection and isolation has been developed. The knowledge bases and the rule-based model that were developed for the Power Distribution Control Unit subsystem of the SSF/EPS testbed are described. A corresponding troubleshooting technique is also described.

Truong, Long V.↗
NASA NTRS1990

Delta wing surface pressures for high angle of attack maneuvers

A wind tunnel experiment was performed on a delta wing with a leading edge sweep of 70 deg. Unsteady pressures were measured on the suction surface of the wing as it was oscillated from 0-30 deg, and 2-60 deg angle-of-attack. Pressure coefficients were measured at different surface locations for two pitch rates. Static pressure measurements were also obtained for comparison with the dynamic results. The Reynolds number was fixed at 420,000, based on the centerline chord length. Pressure measurements were made from 35-90 percent of the chord, along a ray from the apex at 60 percent of the local semispan. Spanwise measurements were also made at a constant chord location, x/c = 75 percent from the apex. The unsteady pressure data over the 0-30 deg angle-of-attack range showed pressures fluctuating in phase with model motion, and little overshoot from the static values. The pressures for the large amplitude motion showed large overshoots from the static values. In addition, during the high angle-of-attack portion of the motion, the upstroke (angle of attack increasing) pressure coefficients were typically much lower than the downstroke values. For the lower pitch rate, there was little difference between upstroke and downstroke pressures at the low angles of attack.

Thompson, S. A.↗
NASA NTRS1990

The effect of the low Earth orbit environment on space solar cells

The results of a space flight experiment designed to provide reference cell standards for photovoltaic measurements as well as to investigate the solar spectrum and the effect of long-term exposure of solar cells to the space environment are presented. This experiment, the Advanced Photovoltaic Experiment (APEX), was launched into low Earth orbit as part of the Long Duration Exposure Facility in 1984 and retrieved 69 months later. APEX contained over 150 solar cells of a wide variety of materials, designs and coverglasses. Data on cell performance was recorded for the first year-on-orbit.

Brinker, David J.↗
NASA NTRS1991

Autonomous power system intelligent diagnosis and control

The Autonomous Power System (APS) project at NASA Lewis Research Center is designed to demonstrate the abilities of integrated intelligent diagnosis, control, and scheduling techniques to space power distribution hardware. Knowledge-based software provides a robust method of control for highly complex space-based power systems that conventional methods do not allow. The project consists of three elements: the Autonomous Power Expert System (APEX) for fault diagnosis and control, the Autonomous Intelligent Power Scheduler (AIPS) to determine system configuration, and power hardware (Brassboard) to simulate a space based power system. The operation of the Autonomous Power System as a whole is described and the responsibilities of the three elements - APEX, AIPS, and Brassboard - are characterized. A discussion of the methodologies used in each element is provided. Future plans are discussed for the growth of the Autonomous Power System.

Ringer, Mark J.↗
NASA NTRS1991

Advanced Photovoltaic Experiment, S0014: Preliminary Flight Results and Post-Flight Findings

The Advanced Photovoltaic Experiment (APEX) is an LDEF experiment designed to provide reference solar cell standards for laboratory measurements as well as to investigate the solar spectrum and the effects of long term exposure of solar cells to the LEO environment. Silicon and gallium arsenide solar cells were flown with the appropriate instrumentation to periodically measure cell performance and temperature. The experimental objectives, the design employed to realize these objectives and the solar cells and instrumentation selected for the flight are presented. A discussion of the flight data returned are included. Preliminary results from the post flight analysis of the absolute cavity radiometer, the digital solar angle sensor, and the Barr Associates narrow bandpass optical filters are also presented. The initial findings of work to determine the chemical nature of contamination layers on APEX are also presented.

Brinker, David J.↗