Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ALLOY SYSTEMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

A study on spherical particles in Al65Cu20Fe15 alloy prepared by arc melting

Highlights: • Spherical particles and facets were found. • Spherical particles consist of quasicrystalline grains embedded in single crystal matrix. • Facets were found on the surface of spherical particles, which can be classified to three types. • A model for the formation of spherical particles is suggested. • Reasons for the formation of facets are discussed. - Abstract: Al-Cu-Fe alloys are important due to reports that stable icosahedral quasicrystalline phase with composition in the vicinity of Al{sub 65}Cu{sub 20}Fe{sub 15} can be prepared. However, it has been widely reported that the as-prepared alloy, very often by arc-melting, is porous, consisting of particles with different morphologies. Among these, one type of particles of a spherical shape is considered as pure cubic β phase in previous reports. In this research, this spherical particle was studied using a Scanning Electron Microscope, Energy Dispersive X-ray Spectroscopy, Transmission Electron Microscope, and Electron Diffraction. It was found that the particles are not single phase, consisting of icosahedral quasicrystalline grains embedded inside single crystal matrix of τ phase. Additionally, there are places where the τ phase appears to have out-most layer enriched in Cu. The surface of the particles is faceted and the facets can be classified to three types according to their detailed structures. A close examination and analysis led to the conclusion that these three types are parallel to the atomic planes of {1 1 0}, {1 1 1}, and {1 0 0}, respectively. A model for the spherical particle formation is suggested and the reasons for the formation of facets are discussed. This report is valuable in clarifying some discrepancies in previous reports, and in understanding the phase development in an Al-Cu-Fe alloy system.

36 MATERIALS SCIENCE↗

Features of the Percolation Scheme of Vibrational Spectrum Reconstruction in the Ga{sub 1–} {sub x}Al{sub x}P Alloy

Specific features of the properties of Ga–P lattice vibrations have been investigated using the percolation model of a mixed Ga{sub 1–} {sub x}Al{sub x}P crystal (alloy) with zero lattice mismatch between binary components of the alloy. In contrast to other two-mode alloy systems, in Ga{sub 1–} {sub x}Al{sub x}P a percolation splitting of δ ~ 13 cm{sup –1} is observed for the low-frequency mode of GaP-like vibrations. An additional GaP mode (one of the percolation doublet components) split from the fundamental mode is observed for the GaP-rich alloy, which coincides in frequency with the gap corresponding to the zero density of one-phonon states of the GaP crystal. The vibrational spectrum of impurity Al in the GaP crystal has been calculated using the theory of crystal lattice dynamics. Upon substitution of lighter Al for the Ga atom, the calculated spectrum includes, along with the local mode, a singularity near the gap with the zero density of phonon states of the GaP crystal, which coincides with the mode observed experimentally at a frequency of 378 cm{sup –1} in the Ga{sub 1–} {sub x}Al{sub x}P (x < 0.4) alloy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Epitaxial strain and antiferromagnetism in Heusler Fe{sub 2}VSi thin films

The effects of biaxial strain on the electrical and magnetic properties of an antiferromagnetic Heusler compound Fe{sub 2}VSi were systematically investigated. A series of epitaxial Fe{sub 2}VSi thin films on MgAl{sub 2}O{sub 4} and MgO substrates were fabricated with different tensile strains by varying the substrate-lattice mismatch and the film thickness. The strain was characterized by the ratio of the out-of-plane lattice parameter c to the in-plane lattice parameter a; this ratio c/a varied from 0.987 to 0.998 at room temperature. The tensile epitaxial strain was found to increase the antiferromagnetic Neel temperature T{sub N} to 193 K, which is 70 K higher than that for the unstrained bulk material. A clear dependence of T{sub N} on c/a was observed, which is consistent with theoretical predictions in which the band Jahn-Teller effect plays a significant role.

36 MATERIALS SCIENCE↗

Finite Element Simulation of Machining of Ti6Al4V Alloy

Titanium and its alloys are an important class of materials, especially for aerospace applications, due to their excellent combination of strength and fracture toughness as well as low density. However, these materials are generally regarded as difficult to machine because of their low thermal conductivity and high chemical reactivity with cutting tool materials. Moreover, the low thermal conductivity of Titanium inhibits dissipation of heat within the workpiece causing an higher temperature at the cutting edge and generating for higher cutting speed a rapid chipping at the cutting edge which leads to catastrophic failure. In addition, chip morphology significantly influences the thermo-mechanical behaviour at the workpiece/tool interface, which also affects the tool life.In this paper a finite element analysis of machining of TiAl6V4 is presented. In particular, cutting force, chip morphology and segmentation are taken into account due to their predominant roles to determine machinability and tool wear during the machining of these alloys. Results in terms of residual stresses are also presented. Moreover, the numerical results are compared with experimental ones.

36 MATERIALS SCIENCE↗

Determination of design allowable strength properties of elevated-temperature alloys. Part 1: Coated columbium alloys

A program to determine the characteristics of two coated columbium alloy systems for spacecraft structures is discussed. The alloy was evaluated as coated base material, coated butt-welded material, and material thermal/pressure cycled prior to testing up to 30 cycles. Evaluation was by means of tensile tests covering the temperature range to 2400 F. Design allowables were computed and are presented as tables of data. The summary includes a room temperature property table, effect of temperature curves, and typical stress-strain curves.

Favor, R. J.↗

Advancement of Novel Additively Manufactured Alloys for Space Applications

NASA has been involved in the development and maturation of metal additive manufacturing (AM) for space applications since the late 2000’s. Several efforts have focused on the understanding of AM processes through material characterization and testing, standards development, component fabrication, and infusion into development and flight applications. While many common aerospace alloys have been and continue to be a focus of ongoing development, the need for custom-alloy developments for high performance applications enabled by AM processes has been realized. The applications being targeted are liquid rocket engines with high heat fluxes, high pressure, and that utilize propellants such as hydrogen, which can degrade the alloy. NASA has recently focused on the development and advancement of novel alloy advancement using AM for use in these harsh environments, such as GRCop-42, GRCop-84, NASA HR-1, and JBK-75. These alloys have been evaluated using the laser powder bed fusion (L-PBF) and laser powder directed energy deposition (LP-DED) processes. The results from these processes have demonstrated that AM can enable rapid development of new alloy systems that can yield higher performances. These alloys have undergone the fundamental metallurgical evaluations, heat treatment study, and microstructure characterization and mechanical testing campaign. This, combined with direct application-specific component fabrication and hot-fire testing, enabled the increase of the Technology Readiness Level (TRL). This presentation will provide a background and overview of these AM-enabled novel alloys, AM processing development including metallurgical and mechanical property studies. It will also cover the latest advancement in the parallel component development and testing and future developments. The goal of these alloy development is to allow for technology infusion into NASA and commercial spaceflight missions as well as to establish and sustain the needed commercial AM supply chain.

Additive Manufacturing↗

Comparative study of local atomic structures in Zr{sub 2}Cu{sub x}Ni{sub 1−x} (x = 0, 0.5, 1) metallic glasses

Extensive analysis has been performed to understand the key structural motifs accounting for the difference in glass forming ability in the Zr-Cu and Zr-Ni binary alloy systems. Here, the reliable atomic structure models of Zr{sub 2}Cu{sub x}Ni{sub 1−x} (x = 0, 0.5, 1) are constructed using the combination of X-ray diffraction experiments, ab initio molecular dynamics simulations and a constrained reverse Monte Carlo method. We observe a systematic variation of the interatomic distance of different atomic pairs with respect to the alloy composition. The ideal icosahedral content in all samples is limited, despite the high content of five-fold symmetry motifs. We also demonstrate that the population of Z-clusters in Zr{sub 2}Cu glass is much higher than that in the Zr{sub 2}Ni and Zr{sub 2}Cu{sub 0.5}Ni{sub 0.5} samples. And Z12 〈0, 0, 12, 0〉 Voronoi polyhedra clusters prefer to form around Cu atoms, while Ni-centered clusters are more like Z11 〈0, 2, 8, 1〉 clusters, which is less energetically stable compared to Z12 clusters. These two different structural properties may account for the higher glass forming ability of Zr{sub 2}Cu alloy than that of Zr{sub 2}Ni alloy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Decreasing the Grain Boundary Diffusivity in Binary Alloys with Increasing Temperature

An interfacial thermodynamic model predicts that the interplay of grain boundary (GB) premelting, prewetting, and retrograde solubility in a binary alloy can lead to a decrease in the GB diffusivity with increasing temperature. This counterintuitive prediction is experimentally confirmed for a single-phase, Mo +0.5 at. % Ni alloy. This study calls for a reappraisal of the classical GB adsorption (segregation) theories to consider the coupling with structural disordering, and it critically supports GB premelting and prewetting theories with broad applications.

36 MATERIALS SCIENCE↗

Optical properties of ion-doped ZnO(Se) layers in the context of band anticrossing theory

The study of the optical properties of ZnO(Se) is a continuation of previous studies of ZnS(O), ZnSe(O), and CdS(O) systems in the context of band anticrossing theory. Selenium ions are implanted into high-purity zinc oxide crystals to a concentration of 10{sup 20} cm{sup –3}. The microcathodoluminescence spectra recorded with a scanning electron microscope at a temperature of 100 K provide information from the bulk of the implanted layer. The origin of the orange-red luminescence of ZnO(Se)–Zn layers is clarified. Orangered luminescence is thought to be a result of the formation of a highly mismatched alloy system, in which ZnSe(O) is formed during implantation and radiation annealing. Data suggesting that the green luminescence of pure self-activated ZnO–Zn is the self-activated (SA) emission studied in detail for other II–VI compounds (ZnS(O), ZnSe(O)) and defined by intrinsic defect complexes (A centers) are reported.

36 MATERIALS SCIENCE↗

Ta clustering and microstructural evolution in the A1 to L1{sub 0}Fe{sub 52}Pt{sub X}(Ta{sub 1-X}) phase transformation

A series of Fe{sub 52}Pt{sub 48},Fe{sub 52.3}Pt{sub 46.3}Ta{sub 1.4} and Fe{sub 52}Pt{sub 40.7}Ta{sub 7.3} thin films were sputter deposited and subsequently annealed at 550 and 750 deg. C for 30 min. The as-deposited films, which adopted the A1 phase, had a change from a predominate (111) fiber texture to (200) with the Ta additions. This has been explained in terms of the competition between the surface energy and strain energy. Annealing at 550 deg. C facilitated the L1{sub 0} order in Fe{sub 52}Pt{sub 48} and Fe{sub 52.3}Pt{sub 46.3}Ta{sub 1.4}. Upon annealing at 750 deg. C, all three composition films phase transformed into L1{sub 0}. Atom probe tomography revealed nanoscale clustering in the annealed Ta containing films. The formation of these clusters appeared to be a necessary initial step to allow the L1{sub 0} ordering reaction to occur but clustering in of itself is not sufficient for order. For the Fe{sub 52}Pt{sub 40.7}Ta{sub 7.3} film, the Ta must be depleted within the matrix to a sufficient level to allow the binary Fe-Pt to order. For the Fe{sub 52.3}Pt{sub 46.3}Ta{sub 1.4} film, these clusters were qualitatively observed within the grains at 550 deg. C and in the grain boundaries at 750 deg. C. The Fe{sub 52}Pt{sub 40.7}Ta{sub 7.3} film had clusters within and near grain boundaries. The clustering in the grain boundaries deterred grain growth through a Zener-based pinning mechanism.

36 MATERIALS SCIENCE↗

Establishing a Database of High Temperature Salt Properties for Nuclear Applications

The Fluoride-Salt-Cooled High-Temperature Reactor (FHR) is a new reactor concept employing a high temperature liquid salt fluoride coolant. The thermophysical property data for candidate salt coolants is very limited. The uncertainties of these properties are quite high and not well documented. For researchers exploring reactor designs such as the FHR, a database of high temperature liquid salts for nuclear applications is being established. Researchers can use the database, which will be updated with new experimental data, to find thermophysical properties and associated uncertainties for salt coolants to use in their analyses. This paper serves as an introduction of the database and highlights the main three coolants in the database that are considered for use in the FHR design. The salts considered for the Fluoride-Salt-Cooled High- Temperature Reactor (FHR) include LiF-BeF{sub 2} (flibe) and NaFZrF{sub 4} (nafzirf) as potential primary loop coolants and LiF-NaFKF (flinak) as a secondary loop coolant. Flibe is the primary candidate for the primary loop coolant. It has the lowest neutron cross section, is chemically stable with low corrosion rates in high-nickel alloy systems, and is weakly radioactive with the primary activation product tritium resulting in very low radiation levels in the primary loop. Flibe does have some disadvantages, which include toxicity of beryllium and the need to enrich lithium to at least 99.995% Li-7 to maintain a low nuclear cross section. For design analysis, the baseline salt used is nafzirf because it has less attractive neutronic and thermophysical properties. The benefits of nafzirf over flibe including no direct tritium production and lower cost. By designing a reactor to operate using nafzirf, it is assumed that the reactor will operate better using flibe as the coolant. Thus, one can consider the coolants flibe and nafzirf to be bounding primary salt coolants for reactor design. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Status Report on Separate Effects Testing of Thermal Conductivity of U-Zr Alloy

Phases by definition in an alloy system have distinct physical and chemical properties, including thermal conductivity. The goal of this multi-year study is to show that the different phases present in the U-Zr system indeed do have different thermal conductivities. This study will provide meso-scale (10-100 µm) experimental observations using the Thermal Conductivity Microscope (TCM) of phase dependent thermal conductivity. The results of this study may indicate the need to reconsider the application of homogeneous medium assumption for metallic nuclear fuel that is currently used in fuel performance modeling, and could provide input for improving such model using a heterogeneous phase dependent assessment of thermal properties. The local thermal conductivity values from the TCM will be compared to the bulk measurements to validate this work. Twelve alloy samples with varying Zr compositions and heat treatments were fabricated for the initial phase of this study to characterize the individual phases present in the U-Zr system. The gamma body-centered cubic (BCC) phase was successfully identified in the appropriate size for TCM measurement. Next steps in this work will include identification of remaining phases in the U-Zr alloy system. Thermal conductivity will be measured in those phase areas of the materials and used to assess fuel performance codes for improvements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A hybrid aluminium alloy and its zoo of interacting nano-precipitates

An alloy with aluminium as its base element is heat treated to form a multitude of precipitate phases known from different classes of industrial alloys: Al–Cu(–Mg), Al–Mg–Si–Cu, and Al–Zn–Mg. Nanometer-sized needle-shaped particles define the starting point of the phase nucleation, after which there is a split in the precipitation sequence into six phases of highly diverse compositions and morphologies. There are several unique effects of phases from different alloy systems being present in the same host lattice, of which we concentrate on two: the replacement of Ag by Zn on the Ω interface and the formation of combined plates of the θ′ and C phases. Using atomically resolved scanning transmission electron microscopy and energy-dispersive X-ray spectroscopy, we investigate the formation mechanisms, crystal structures and compositions of the precipitates. - Graphical abstract: Display Omitted - Highlights: • An aluminium alloy composition in-between the 2/6/7xxx systems was investigated. • Six different phases from the three systems coexist in an over-aged state. • All phases with 〈001〉{sub Al} coherencies can nucleate on 6xxx needle precipitates. • Modified theta′ and omega interfaces are observed.

36 MATERIALS SCIENCE↗

Comparative Magnetic and Structural Properties Study of Micro- and Nanopowders of Nd{sub 2}Fe{sub 14}B Doped with Ni

Micropowders of melted and heat-treated Nd{sub 16}(Fe{sub 76−x}Ni{sub x})B{sub 8} alloys system, with x = 0, 10, 20, and 25 (size distribution under 20 μm), were studied and compared with the study of nanopowders obtained, from the previous ones, by surfactant-assisted ball-milling process during 2 h. By XRD, a majority of Nd{sub 2}Fe{sub 14}B hard phase and a minority of α-Fe, Nd{sub 1.1}Fe{sub 4}B{sub 4} and NdNi{sub 2} phases were detected. The last one increases with Ni content. The crystallite size of the hard phase, in both types of samples, is not affected by the Ni content; however, the grains in micropowders are oblate, with a mean size of 37 nm, while those of the nanopowders are symmetric, with a mean size of 35 nm. Mössbauer spectra were fitted with seven sextets, which correspond to the six ferromagnetic sites of the hard phase and that of the α-Fe, and a doublet corresponding to the paramagnetic Nd{sub 1.1}Fe{sub 4}B{sub 4} phase. The mean hyperfine magnetic field, for both types of samples, decreases with Ni content. The hysteresis loops of both types of samples show a hard magnetic character, however, the coercive field and the M{sub r}/M{sub s} values for nanopowders are greater than those obtained for micropowders for all the Ni contents. Values of H{sub c} = 2 kOe and M{sub r}/ M{sub s} = 0.54 were obtained for nanopowders with 10 at.% Ni. From the hysteresis loops, which include the initial magnetization curve, Henkel plots for all the samples were obtained. These plots show that for micropowders, the predominant magnetic interaction is of dipolar type, while for nanopowders, the ferromagnetic exchange is the predominant one, which favored the magnetization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low-temperature grown quaternary Heusler-compound Co{sub 2}Mn{sub 1-x}Fe{sub x}Si films on Ge(111)

Highly ordered quaternary Co{sub 2}Mn{sub 1-x}Fe{sub x}Si films on Ge(111) are explored for spintronic device applications on Si-large-scale integrated circuit (LSI) platform. By using low-temperature molecular beam epitaxy techniques, relatively large magnetic moments are demonstrated for x between 0.50 and 1.0 despite extremely low temperature growth of 130 deg. C. Also, L2{sub 1}-ordered crystal structures can be realized even on a group-IV semiconductor substrate, Ge, compatible with Si-LSI technologies. By the point contact Andreev reflection method, the spin polarization of Co{sub 2}Mn{sub 0.5}Fe{sub 0.5}Si films is estimated to be P= 0.58 {+-} 0.02. We believe that this study will be a first step for integration of high-performance spintronic applications with next ultra LSI.

36 MATERIALS SCIENCE↗

Ductility Enhancement of Molybdenum Phase by Nano-sizedd Oxide Dispersions

The present research is focused on ductility enhancement of molybdenum (Mo) alloys by adding nano-sized oxide particles to the alloy system. The research approach includes: (1) determination of microscopic mechanisms responsible for the macroscopic ductility enhancement effects through atomistic modeling of the metal-ceramic interface; (2) subsequent computer simulation-aided optimization of composition and nanoparticle size of the dispersion for improved performance; (3) synthesis and characterization of nanoparticle dispersion following the guidance from atomistic computational modeling analyses (e.g., by processing a small sample of Mo alloy for evaluation); and (4) experimental testing of the mechanical properties to determine optimal ductility enhancement.Through atomistic modeling and electronic structure analysis using full-potential linearized muffin-tin orbital (FP-LMTO) techniques, research to date has been performed on a number of selected chromium (Cr) systems containing nitrogen (N) and/or magnesium oxide (MgO) impurities. The emphasis has been on determining the properties of the valence electrons and the characteristics of the chemical bonds they formed. It was found that the brittle/ductile behavior of this transitional metal system is controlled by the relative population of valence charges: bonds formed by s valence electrons yield metallic, ductile behavior, whereas bonds formed by d valence electrons lead to covalent, brittle behavior. The presence of valence bands from impurities also affects the metal bonding, thereby explaining the detrimental and beneficial effects induced by the inclusion of N impurities and MgO dispersions. These understandings are useful for optimizing ductility enhancement effects on the dispersion materials.

36 MATERIALS SCIENCE↗

Precisely predicting and designing the elasticity of metallic glasses

We reveal that the elastic moduli of metallic glasses (MGs) invariably vary in a much steeper manner than that predicted by the conventional “rule of mixtures” in individual alloy systems. Such deviations are proved to originate fundamentally from their disordered atomic structures and intrinsic local heterogeneities. By treating the MGs as atomic-level dual phase hybrids, we further propose universal relations to be capable of precisely predicting and designing the elastic constants of MGs. This may contribute to the development of MGs with intended properties and behaviors, and allow new understandings on the structures and properties as well as their relationships in MGs.

42 ENGINEERING↗

The effects of tungsten concentration on crystalline structure and perpendicular magnetic anisotropy of Co-W films

In this study, Co-W thin films deposited by DC magnetron sputtering were demonstrated to be perpendicular magnetic anisotropic with large magnetocrystalline anisotropy energy (MAE). Thermodynamic calculations based on Miedema’s semi-empirical model have been used to estimate the phase in this binary alloy system. Based on the thermodynamic calculations results, a series of Co-W thin films were deposited on amorphous Ta underlayer with different tungsten concentrations. According to the X-ray diffraction results, the crystal structure of Co-W thin films is consistent well with that of thermodynamic calculations. Large MAE of Co-W thin films can be obtained with K{sub u} over 2.1 × 10{sup 5} J/m{sup 3} after vacuum annealing. The perpendicular coercivity (H{sub c}) of Co-W thin film reaches 9.1 × 10{sup 4} A/m. Therefore, the Co-W thin film is considered as a potential choice of high-density magnetic recording media materials.

36 MATERIALS SCIENCE↗