Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACCURACY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Digital Filter Design for Point-on-Wave Sensors: Highlighting Frequency Response Limitations and Enhancing Grid Simulation Accuracy

Data is proving to be the backbone of today's and, more importantly, tomorrow's grid. As the system changes and introduces fast-acting devices like power electronics, overall observability tends to decrease from the utility point-of-view. This can be mitigated by adding more high-fidelity sensors onto the grid, although this incurs a cost. These sensors are never ideal, and each have unique frequency responses that may influence the data produced. This may, in turn, impact the protection and control of the power grid. This paper presents a methodology of representing these point-on-wave sensors digitally by estimating digital-filter representations of them, thereby introducing means of improving the sensor models used in electromagnetic-transient (EMT) simulations. This may help with identifying potential high-frequency, sensor-induced distortions, and system resonance compensation. Three commercial-grade medium-voltage point-on-wave sensors are utilized in a lab environment to obtain experimental frequency responses with a frequency sweep, and it is shown that both Infinite Impulse Response (IIR) and Finite Impulse Response (FIR) filter representations may approximate these responses with varying degrees of accuracy, though each has their own strengths and weaknesses. It is found that, in general, FIR estimation better approximates these sensors than IIR estimation does.

Wilson, Aaron [ORNL] (ORCID:0000000327331697)↗
DOE OSTI2021

Assessing the Accuracy of Balanced Power System Models in the Presence of Voltage Unbalance

Traditional models of electric power systems represent distribution systems with unbalanced three-phase network models and transmission systems with balanced single-phase-equivalent network models. This distinction poses a challenge for coupled models of transmission and distribution systems, which are becoming more prevalent due to the growth of distributed energy resources connected to distribution systems. In order to maintain a balanced network representation, transmission system models typically assume that the voltage phasors at the interface to the distribution system are balanced. Inaccuracies resulting from this assumption during unbalanced operation can lead to erroneous values for line currents in the transmission system model. This paper empirically quantifies the accuracy of this balanced operating assumption during unbalanced operating conditions for both a simple two-bus system along with a more complex transmission and distribution co-simulation. This paper also characterizes the performance of different methods for translating the unbalanced voltage phasors into a balanced representation in order to give recommendations for modeling coupled transmission and distribution systems.

power distribution↗
DOE OSTI2021

Improving the Accuracy of Clustering Electric Utility Net Load Data using Dynamic Time Warping

Identifying patterns in electric utility net load data in a time-series format is very useful in preparing the operation for next day. Machine learning algorithms have been used in other domains and those concepts are applied in this paper on real-world net load measurement data. Clustering is the practice of grouping data with similar characteristics as determined by the distance measure. The K-means clustering algorithm is utilized here with actual electric utility data. The paper uses the standard distance measure, Euclidean distance (ED), and compares its performance against the dynamic time warping (DTW) measure. An actual case study with real data is presented, and DTW distance measure-based method observed to result better accuracy compared to the ED based method for substation net load measurements predominantly with residential customers.

clustering↗
DOE OSTI2024

Positioning Accuracy in a Concurrent Robot-CNC Hybrid Manufacturing System

Abstract Additive manufacturing (AM) has gained notoriety for offering advantages over traditional manufacturing methods, such as increased design complexity and flexibility. However, it has not found widespread use beyond rapid prototyping. One hindrance to the acceptance of AM processes in industry is the time and cost of fabrication per component. While metal AM by itself can be inexpensive, extra manufacturing steps in the form of subtractive manufacturing (SM) may need to be performed to reach final part tolerances, leading to hybrid additive-subtractive manufacturing (HASM) of a part, which increases time and cost. A potential area to reduce cost is through increasing the efficiency of the HASM process by conducting additive and subtractive manufacturing simultaneously. Usually, HASM is performed in a process where AM is completed in one machine or cell and transferred to another machine or cell for SM in a sequential assembly line process. This efficiency decreases part cost, but high aspect ratio parts or parts with internal geometry that require interleaved additive deposition and machining cannot be produced. One unexplored solution to simultaneous HASM that allows for interleaved operations is to operate the deposition head and machining spindle concurrently within the same machine envelope, known as concurrent HASM (CHASM). In this type of process, both AM and SM occur simultaneously on a batch of small parts or a single large part, maintaining a high efficiency without sacrificing the full range of complex geometries that AM allows for. A potential approach to the single-machine method could be to combine a robot and mill within the same envelope. A challenge to this approach, however, is control of both systems. Most machine controllers have limited external communication or, if a robot has been integrated, only offer movement of either the robot or mill at any given time. As a result, systems must pause either the AM or SM process to switch between them rather than working simultaneously. The present work investigates the positional accuracy of such a CHASM system comprised of a robotic arm and a 3-axis mill. Open-loop tests with limited communication between machines are performed on the system to verify positional error during concurrent robot-mill movements. Under certain conditions, it is demonstrated that position error can stay within 2 mm for the duration of a single layer; however, these tests show that, generally, the open-loop positioning performance of the system is inadequate for CHASM without part-specific hand-tuning of parameters. Based on these results, a set of requirements for successful robot-CNC CHASM is proposed for future integrations.

Goodwin, Jesse↗
DOE OSTI2021

Evaluation of the accuracy of stopping and range of ions in matter simulations through secondary ion mass spectrometry and Rutherford backscattering spectrometry for low energy heavy ion implantation

The freely available “Stopping and Range of Ions in Matter” (SRIM) code is used for evaluating ion beam ranges and depth profiles. We present secondary ion mass spectrometry and Rutherford backscattering experimental results of Si samples implanted with low energy Sb ions to evaluate the accuracy of SRIM simulations. We show that the SRIM simulation systematically overestimates the range by 2–6 nm and this overestimation increases for larger ion implantation energy. For the lowest energy implantation investigated, here we find up to a 25% error between the SRIM simulation and the measured range. Finally, the ion straggle shows excellent agreement between simulation and experimental results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Effects of error, chimera, bias, and GC content on the accuracy of amplicon sequencing

ABSTRACT Targeted amplicon sequencing is widely used in microbial ecology studies. However, sequencing artifacts and amplification biases are of great concern. To identify sources of these artifacts, a systematic analysis was performed using mock communities comprised of 16S rRNA genes from 33 bacterial strains. Our results indicated that while sequencing errors were generally isolated to low-abundance operational taxonomic units, chimeric sequences were a major source of artifacts. Singleton and doubleton sequences were primarily chimeras. Formation of chimeric sequences was significantly correlated with the GC content of the targeted sequences. Low-GC-content mock community members exhibited lower rates of chimeric sequence formation. GC content also had a large impact on sequence recovery. The quantitative capacity was notably limited, with substantial recovery variations and weak correlation between anticipated and observed strain abundances. The mock community strains with higher GC content had higher recovery rates than strains with lower GC content. Amplification bias was also observed due to the differences in primer affinity. A two-step PCR strategy reduced the number of chimeric sequences by half. In addition, comparative analyses based on the mock communities showed that several widely used sequence processing pipelines/methods, including DADA2, Deblur, UCLUST, UNOISE, and UPARSE, had different advantages and disadvantages in artifact removal and rare species detection. These results are important for improving sequencing quality and reliability and developing new algorithms to process targeted amplicon sequences. IMPORTANCE Amplicon sequencing of targeted genes is the predominant approach to estimate the membership and structure of microbial communities. However, accurate reconstruction of community composition is difficult due to sequencing errors, and other methodological biases and effective approaches to overcome these challenges are essential. Using a mock community of 33 phylogenetically diverse strains, this study evaluated the effect of GC content on sequencing results and tested different approaches to improve overall sequencing accuracy while characterizing the pros and cons of popular amplicon sequence data processing approaches. The sequencing results from this study can serve as a benchmarking data set for future algorithmic improvements. Furthermore, the new insights on sequencing error, chimera formation, and GC bias from this study will help enhance the quality of amplicon sequencing studies and support the development of new data analysis approaches.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

A new benchmark of soft X-ray transition energies of $$\mathrm {Ne}$$, $$\mathrm {CO}_2$$, and $$\mathrm {SF}_6$$: paving a pathway towards ppm accuracy

Abstract A key requirement for the correct interpretation of high-resolution X-ray spectra is that transition energies are known with high accuracy and precision. We investigate the K-shell features of $$\mathrm {Ne}$$ Ne , $$\mathrm {CO}_2$$ CO 2 , and $$\mathrm {SF}_6$$ SF 6 gases, by measuring their photo ion-yield spectra at the BESSY II synchrotron facility simultaneously with the 1s– n p fluorescence emission of He-like ions produced in the Polar-X EBIT. Accurate ab initio calculations of transitions in these ions provide the basis of the calibration. While the $$\mathrm {CO}_2$$ CO 2 result agrees well with previous measurements, the $$\mathrm {SF}_6$$ SF 6 spectrum appears shifted by $$\sim $$ ∼ 0.5 eV, about twice the uncertainty of the earlier results. Our result for $$\mathrm {Ne}$$ Ne shows a large departure from earlier results, but may suffer from larger systematic effects than our other measurements. The molecular spectra agree well with our results of time-dependent density functional theory. We find that the statistical uncertainty allows calibrations in the desired range of 1–10 meV, however, systematic contributions still limit the uncertainty to $${\sim }$$ ∼ 40–100 meV, mainly due to the temporal stability of the monochromator energy scale. Combining our absolute calibration technique with a relative energy calibration technique such as photoelectron energy spectroscopy will be necessary to realize its full potential of achieving uncertainties as low as 1–10 meV. Graphical abstract

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Improving precision and accuracy of genetic mapping with genotyping-by-sequencing data in outcrossing species

This dataset contains all data and supplementary materials from "Improving precision and accuracy of genetic mapping with genotyping-by-sequencing data in outcrossing species". An Excel file a list of all QTLs and linkage group length (in cM) obtained with two different SNP-calling methods (Tassel-Uneak and Tassel-GBS), genetic map-construction method (linkage-only and reference order-corrected) and depth filters (12x, 20x, 30x and 40x) for genetic mapping of 18 biomass yield traits in a biparental Miscanthus sinensis population using RAD-Seq SNPs is provided as "Supplementary file 1". A Perl script with the code for filtering VCF and HapMap-formatted data files is provided as “Supplementary file 2”. Phenotype data used for QTL mapping is provided as “Supplementary File 3”. A Perl script with the code for the simulation study is provided as “Supplementary file 4”.

GenotypingSimulator↗
DOE OSTI2020

Micrometer-accuracy 2D displacement interferometer with plasmonic metasurface resonators

In this Letter, a high-accuracy, two-dimensional displacement sensor is proposed, designed, and demonstrated based on the concept of an extrinsic Fabry–Perot Interferometer. The sensor is composed of two bundled single-mode optic fibers in parallel and two plasmonic metasurface resonators inscribed on a gold substrate via a focused ion beam. The fiber end surface and the metasurface are in parallel with a small cavity between. The cavity change or Z -component displacement is determined from the pattern of interference fringes. The X -component displacement, perpendicular to the Z component, is identified from wavelength-selective metasurface resonators, which possess unique resonant wavelengths due to different nanostructure designs. The sensor was calibrated with six displacements applied through a three-axis precision linear stage. Test results indicated that the proposed interferometer can measure displacements with a maximum error of 5.4 µm or 2.2%.

Guo, Chuanrui (ORCID:0000000271412972)↗
DOE OSTI2024

Reservoir Simulations and Accuracy Measures for CO 2 and Pressure Plumes for the Broom Creek Formation in Central North Dakota

Conference paper presented at 17th International Conference on Greenhouse Gas Control Technologies (GHGT-17), Calgary, Alberta, Canada, October 20–24, 2024. This study estimated the accuracy of the predicted 5-year carbon dioxide (CO 2 ) and pressure plumes for a hypothetical geological storage project injecting CO 2 into the Broom Creek Formation near central North Dakota.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2020

Realizing High-Accuracy Low-Cost Measurement and Verification for Deep Cost Savings (BPA Cost Share CRADA)

Developed practitioner workflows that integrate advanced M&V tools with supplementary automated routines for non-routine adjustments and for quantification of savings uncertainty to indicate rigor. Demonstrated these workflows with Seattle City Light, in collaboration with their implementers and evaluators – determine labor and time/cost savings, and uncertainty of the results obtained. Engaged the Pacific Northwest regulatory community to determine acceptance criteria for the required accuracy and reporting of advanced whole-building M&V. Documented the findings to facilitate broad industry uptake of the solutions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

Evaluation of The NSUF Reactor Activation and Damage (RAD) Calculator: Assessing the Accuracy of the Activation Calculator

Nuclear Science User Facilities developed an activation calculator as part of the Combined Material Experiment Toolbox project. The activation calculator estimates the radionuclide concentration in an irradiated sample to indicate when and where the samples may best be examined to only help with scoping the experiment. To verify the accuracy of the calculator, the results from the specific gamma dose rate [mrem/hr/g] at various cooldown times were compared to equivalent results generated in ORIGEN. Most elements were tested as a sample composed solely of that element. These samples were exposed to thirteen different lengths of irradiation in all reactor positions included in the calculator. For elements of interest (i.e., ones currently included in the Nuclear Fuels and Materials Library), 83% of the test cases fell within the allowed tolerance for this scoping tool of ±50%. The overall error is logarithmic with irradiation length and is almost completely independent of reactor position. The primary source of error is missing nuclear data and reactions. NSUF believes that the RAD Calculator can be deployed to the user community because it is designed to provide estimates to aid researchers in planning experiments, and users are cautioned about the limitations of the calculator.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Radar Motion Measurements and Synthetic Aperture Radar Image Geolocation Accuracy

Once a Synthetic Aperture Radar (SAR) image is formed, the natural question then is, "Where is this image?" and/or "Where exactly is this feature displayed in the image?" Thus, geolocation is an important exploitation of the SAR image. Since SAR measures relative location to its own position, it is crucial to understand how the radars position and motion imp acts the ability to geolocate a feature in the SAR image. Furthermore, accuracy and precision of navigation aids like GPS directly impact the goodness of the geolocation solution. These relationships are developed and discussed.

58 GEOSCIENCES↗
DOE OSTI2021

Assessing the Accuracy of a Borehole-Controlled Velocity Model of Yucca Flat, Nevada, Using Large-N Seismic Data

The Source Physics Experiment (SPE) aims to improve nuclear test monitoring capabilities through a series of chemical explosions in Yucca Flat within the Nevada National Security Site (NNSS) (Snelson et al., 2013). With geologic data from over 950 boreholes, Yucca Flat has excellent borehole control on stratigraphy. These data were used to create a Geologic Framework Model (GFM) of the basin to aid in the study of seismic wave propagation through the Earth. However, the seismic velocities of the geologic units in the GFM are less well-defined. With the acquisition of five new active source Large-N datasets, we can now quantitatively assess the accuracy of the seismic model previously controlled by borehole data alone.

58 GEOSCIENCES↗
DOE OSTI2021

High-Accuracy Module Emulators from Physically-Constrained AI Algorithms

Focal Area(s): How do we use AI tools to integrate observations, simulated data and physical and chemical fundamentals (Focal Area 3) into model components (Focal Area 2) that have high accuracy and stability and low computational burden to improve Earth System Predictability? Science Challenge: Earth system modeling of the hydrological cycle involves compute-intensive modules representing complex chemical and physical process. Recently, AI tools that are far less compute intensive have been developed that emulate these modules, but many of these efforts are not yet sufficiently accurate or even stable. We know a lot about the physics and chemistry of earth system processes. The Science Challenge is developing AI tools that not only incorporate observations and simulated data, but also incorporate the physics and chemistry of the process, while still maintaining the compute efficiency.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Spiner-EOSPAC Comparison: performance and accuracy on Power9 CPU and GPU

The goal of this report is to concisely compare EOSPAC to Spiner EOS for a selection of commonly-used materials over as much of their domain as is possible. Importantly, this comparison does not address the way that the Euler equations may amplify interpolation errors and we take as given that the rational function interpolator gives the best possible representation of the EOS represented by the Sesame data. Neither does the report address all, or even majority of, the capabilities of each code nor does it explore performance or accuracy over multiple compilers and platforms.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Spiner vs EOSPAC6: capabilities, performance, and accuracy considerations

The Cross-Cutting Capabilities Project (XCAP) has significant interest in collecting and implementing a common set of libraries to be used across the various production hydro-codes at LANL. A common set of libraries will help facilitate comparisons between codes. In addition to minimizing variables for comparisons and physics validation, efforts toward optimization and porting of packages for future architectures will be more efficient. As part of this push Singularity is being considered as an inclusive materials interface library. One crucial part of this library is the importing, inverting, and interpolation of equation of state (EOS) data. Currently the Lagrangian Applications Project (LAP) and Safety Applications Project (SAP) are using EOSPAC6 for delivery EOS data. The Eulerian Applications Project (EAP) has historically used TEOS and more recently an implementation of Singularly via a package called Spiner for EOS interpolation. Singularity currently has the option of using several analytical EOS models, directly employing SESAME via Spiner, or directly using SESAME via EOSPAC6 (not optimized yet). Assuming Singularity moves forward as a common platform for the implementation of materials models, a decision will need to be made on which EOS interpolation package XCAP should move forward with, given resources and people are finite. We will attempt to address pros and cons of Spiner and EOSPAC6 and the trade-offs that should be considered during the decision making process. This report is intended as an ASC-PEM-EOS perspective on what is needed in an EOS interpolation package. Performance and Accuracy sections will mostly address data from comparison studies in LA-UR-22-22699.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗