Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “yield point”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

A mechanism-based quantitative multi-scale framework for investigating irradiation hardening of tungsten at low temperature

We present the development and validation of a mechanism-based multi-scale modeling framework to quantitatively link the irradiation defect evolution kinetics at the microscopic scale to the macroscopic yield strength and flow stress evolution of tungsten irradiated at low temperature (0.08 < T/T m < 0.18, where T m is the melting point and is equal to 3673 K). The mechanism-based strength model, proposed as the superposition of thermal softening and modified dispersed barrier hardening, is developed to understand the underlying strengthening mechanisms. The thermal softening exponent as defined in the Johnson-Cook model is obtained by fitting unirradiated yield strength at different temperatures. A set of irradiation-induced defect kinetics equations with the thermodynamics parameters derived from the atomic calculations reported in the literature is used to determine the densities and sizes of defect clusters at the meso-scale, and the predicted irradiation damage characteristics are in reasonable quantitative agreement with experimental data from literature. The effects of irradiation condition (temperature and irradiation dose) and test temperature on yield strength are quantitatively predicted and compared with experimental measurements from the literature. Here, the predicted irradiation hardening and strain hardening are compared with experimental data as model validation.

36 MATERIALS SCIENCE↗

Nucleon axial and pseudoscalar form factors using twisted-mass fermion ensembles at the physical point

We compute the nucleon axial and pseudoscalar form factors using three N f = 2 + 1 + 1 twisted-mass fermion ensembles with all quark masses tuned to approximately their physical values. The values of the lattice spacings of these three physical point ensembles are 0.080, 0.068, and 0.057 fm and spatial sizes 5.1, 5.44, and 5.47 fm, respectively, yielding m π L > 3.6 . Convergence to the ground-state matrix elements is assessed using multistate fits. We study the momentum dependence of the three form factors and check the partially conserved axial-vector current (PCAC) hypothesis and the pion pole dominance (PPD). We show that in the continuum limit, the PCAC and PPD relations are satisfied. We also show that the Goldberger-Treimann relation is approximately fulfilled and determine the Goldberger-Treiman discrepancy. Our final results are g A = 1.245 ( 28 ) ( 14 ) for the nucleon axial charge, ⟨ r A 2 ⟩ = 0.339 ( 48 ) ( 06 ) fm 2 for the axial radius, g π N N ≡ lim Q 2 → − m π 2 G π N N ( Q 2 ) = 13.25 ( 67 ) ( 69 ) for the pion-nucleon coupling constant, and G P ( 0.88 m μ 2 ) ≡ g P * = 8.99 ( 39 ) ( 49 ) for the induced pseudoscalar form factor at the muon capture point. Published by the American Physical Society 2024

Astronomy & Astrophysics↗

Simple Bioparticle Filtration Device Based on an Ultralow-Fouling Zwitterionic Polyurethane Membrane for Rapid Large-Volume Separation of Plasma and Viruses from Whole Blood

Plasma separation from whole blood is oftent required as an essential first step when performing blood tests with a viral assay. However, developing a point-of-care plasma extraction device with a large output and high virus recovery remains a significant obstacle to the success of on-site viral load tests. Here, we report a portable, easy-to-use, cost-efficient, membrane-filtration-based plasma separation device that enables rapid large-volume plasma extraction from whole blood, designed for point-of-care virus assays. The plasma separation is realized by a low-fouling zwitterionic polyurethane-modified cellulose acetate (PCBU-CA) membrane. The zwitterionic coating on the cellulose acetate membrane can decrease surface protein adsorption by 60% and increase plasma permeation by 46% compared with a pristine membrane. The PCBU-CA membrane, with its ultralow-fouling properties, enables rapid plasma separation. The device can yield a total of 1.33 mL plasma from 10 mL whole blood in 10 min. The extracted plasma is cell-free and exhibits a low hemoglobin level. In addition, our device demonstrated a 57.8% T7 phage recovery in the separated plasma. The results of real-time polymerase chain reaction analysis confirmed that the nucleic acid amplification curve of the plasma extracted by our device is comparable to that obtained by centrifugation. With its high plasma yield and good phage recovery, our plasma separation device provides an excellent replacement for traditional plasma separation protocols for point-of-care virus assays and a broad spectrum of clinical tests.

36 MATERIALS SCIENCE↗

Is the Kok effect a respiratory phenomenon? Metabolic insight using 13 C labeling in Helianthus annuus leaves

The Kok effect is a well-known phenomenon in which the quantum yield of photosynthesis changes abruptly at low light. This effect has often been interpreted as a shift in leaf respiratory metabolism and thus used widely to measure day respiration. However, there is still no formal evidence that the Kok effect has a respiratory origin. Here, both gas exchange and isotopic labeling were carried out on sunflower leaves, using glucose that was 13 C-enriched at specific C-atom positions. Position-specific decarboxylation measurements and NMR analysis of metabolites were used to trace the fate of C-atoms in metabolism. Decarboxylation rates were significant at low light (including above the Kok break point) and increased with decreasing irradiance below 100 µmol photons m –2 s –1 . The variation in several metabolite pools such as malate, fumarate or citrate, and flux calculations suggest the involvement of several decarboxylating pathways in the Kok effect, including the malic enzyme. Our results show that day respiratory CO 2 evolution plays an important role in the Kok effect. Furthermore, the increase in the apparent quantum yield of photosynthesis below the Kok break point is also probably related to malate metabolism, which participates in maintaining photosynthetic linear electron flow.

54 ENVIRONMENTAL SCIENCES↗

IGA-MPM: The Isogeometric Material Point Method

In this work, we propose the use of Isogeometric Analysis (IGA) within the context of the Material Point Method (MPM), and refer to the approach as IGA-MPM. We use the idea of IGA, and its instantiation based on Non-Uniform Rational B-Splines (NURBS), to build higher-order accurate and smooth approximation for MPM. Higher-order smoothness yields a continuous representation of the strain rate, and, as a result, prevents jumps in the stress and other history variables as the material points cross the element boundaries. Furthermore, NURBS can exactly represent all conic sections and the corresponding symmetries in the solution, which may be important in some applications. Several numerical examples of increasing complexity are presented, and show the ability of IGA-MPM to eliminate the well known cell-crossing instability of the conventional MPM. In addition, the examples presented demonstrate improved accuracy, convergence, and symmetry preservation of IGA-MPM compared to the conventional MPM, both for rectilinear and curved geometries.

42 ENGINEERING↗

Spectral Element Modeling of Acoustic to Seismic Coupling Over Topography

Acoustic waves in the atmosphere are commonly recorded on seismometers as they couple into the ground. These signals, here called ground coupled airwaves, are not commonly considered in numerical modeling of infrasound propagation, which often assumes a rigid unmeshed boundary. Starting from an analytically-tractable spherical wave model, we analyze how the coupling of an acoustic wave into a planar elastic halfspace changes over a wide range of scenarios. We use energy admittance to quantify acoustic to seismic coupling over both a planar elastic halfspace and meshed topography. Our spectral element and analytic calculations have different maxima as a function of incidence angle, with very high admittance values for near-vertical incidence (maximum ≈78%). Energy admittance calculations at shallow incidence angles are much smaller (less than 1%). In simulations over the complex topography of Sakurajima Volcano, we attribute the variable spatial pattern of energy admittance to changes in earth parameters between each model. The observed pressure difference over the simulated 15 km region appears to be < 2%. While this value is relatively small, the cumulative addition over 100s of km and multiple acoustic bounce points may be significant. Acoustic to seismic coupling along the propagation path may bias long distance yield estimates, particularly when infrasound propagates over regions with steep topography or particularly slow seismic velocities, such as alluvial planes.

58 GEOSCIENCES↗

The ballad of LLM agents: philosophical reasoning for chemistry

Large language models (LLMs) show remarkable potential for scientific reasoning but often produce unreliable or scientifically unactionable outputs when faced with multi-step logic, domain grounding, and interpretability challenges, especially in complex fields like chemistry and materials science. Here, we introduce a framework of philosophical reasoning agents, inspired by canonical thinkers such as Socrates, Descartes, Kant, and Hume, to guide LLM behavior via structured prompt engineering. These agents embody distinct reasoning paradigms (dialectical inquiry, deductive logic, rule-based judgment, and empirical validation) and are evaluated across multiple chemistry subdomains, physical, analytical, general, inorganic, and organic chemistry, using the ChemBench benchmark. Our agentic prompting approach yields substantial accuracy gains on open-ended numerical chemistry questions, with gains of +11.5 percentage points for GPT-4o with Hume, +4.5 percentage points for GPT-5 with Kant, and +21.8 percentage points for GPT-5.1 with Socrates at the strict 1% error threshold, relative to the corresponding base models. Beyond accuracy, we observe benchmark-level model–agent performance patterns, suggesting that different prompting styles interact differently with each base model. These findings demonstrate that embedding philosophy-of-science principles into multi-agent frameworks can improve and produce interpretable, adaptive, and domain-aligned scientific LLMs.

Harb, Hassan [Argonne National Laboratory (ANL), A↗

Topological nodal point superconductivity in checkerboard magnet-superconductor hybrid systems

Here, we demonstrate that checkerboard magnet-superconductor hybrid (MSH) systems possess a rich phase diagram exhibiting both strong topological superconducting (STSC) and topological nodal point superconducting (TNPSC) phases. We show that TNPSC phases exist both for ferromagnetic and antiferromagnetic systems, yielding a plethora of qualitatively different edge mode structures. Checkerboard MSH systems also facilitate the emergence of STSC phases, which can be induced even in the limit of vanishing magnetization. Our results provide a new path for the quantum engineering of topological superconducting phases using atomic manipulation techniques.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Irradiated stainless steel 347 and irradiated, welded, and hydrogen charged Zircaloy-4 property data for the target solution vessel and support lines of SHINE

In support of the reactor-vessel development effort of SHINE medical technologies, irradiation of its structural materials and post-irradiation testing have been performed in the High Flux Isotope Reactor at Oak Ridge National Laboratory. This irradiation was performed on welded and unwelded AISI 347 steel and Zircaloy-4 samples at low temperature (~60°C) in contact with the reactor coolant. Hardness, Charpy, and tensile data have been taken from all cases of unirradiated specimens, while post-irradiation tensile and hardness data have been taken from AISI 347 base metal and Zircaloy-4 base metal and weld specimens so far. Additionally, 3-point bend data have been taken from explosion-welded specimens. The expected changes to hardness, yield strength, ultimate tensile strength, uniform elongation, and total elongation as a result of the low temperature and low dose neutron irradiation are reported here.

36 MATERIALS SCIENCE↗

A stable 15-member bacterial SynCom promotes Brachypodium growth under drought stress

Introduction: Rhizosphere microbiomes are known to drive soil nutrient cycling and influence plant fitness during adverse environmental conditions. Field-derived robust Synthetic Communities (SynComs) of microbes mimicking the diversity of rhizosphere microbiomes can greatly advance a deeper understanding of such processes. However, assembling stable, genetically tractable, reproducible, and scalable SynComs remains challenging. Methods: Here, we present a systematic approach using a combination of network analysis and cultivation-guided methods to construct a 15-member SynCom from the rhizobiome of Brachypodium distachyon. This SynCom incorporates diverse strains from five bacterial phyla. Genomic analysis of the individual strains was performed to reveal encoded plant growth-promoting traits, including genes for the synthesis of osmoprotectants (trehalose and betaine) and Na+/K+ transporters, and some predicted traits were validated by laboratory phenotypic assays. Results: The SynCom demonstrates strong stability both in vitro and in planta. Most strains encoded multiple plant growth-promoting functions, and several of these were confirmed experimentally. The presence of osmoprotectant and ion transporter genes likely contributed to the observed resilience of Brachypodium to drought stress, where plants amended with the SynCom recovered better than those without. We further observed preferential colonization of SynCom strains around root tips under stress, likely due to active interactions between plant root metabolites and bacteria. Discussion: Our results demonstrate that trait-informed construction of synthetic communities can yield stable, functionally diverse consortia that enhance plant resilience under drought. Preferential colonization near root tips points to active, localized plant-microbe signaling as a component of stress-responsive recruitment. This stable SynCom provides a scalable platform for probing mechanisms of plant-microbe interaction and for developing microbiome-based strategies to improve soil and crop performance in variable environments.

Yadav, Archana↗

Laboratory Study of the Torus Instability Threshold in Solar-relevant, Line-tied Magnetic Flux Ropes

Coronal mass ejections (CMEs) occur when long-lived magnetic flux ropes (MFRs) anchored to the solar surface destabilize and erupt away from the Sun. This destabilization is often described in terms of an ideal magnetohydrodynamic instability called the torus instability. It occurs when the external magnetic field decreases sufficiently fast such that its decay index, ${n}_{}=-z\,\partial (\mathrm{ln}{B}_{})/\partial z$, is larger than a critical value, $n\gt {n}_{\mathrm{cr}}^{}$, where ${n}_{\mathrm{cr}}^{}=1.5$ for a full, large aspect ratio torus. However, when this is applied to solar MFRs, a range of conflicting values for ${n}_{\mathrm{cr}}^{}$ is found in the literature. To investigate this discrepancy, we have conducted laboratory experiments on arched, line-tied flux ropes and applied a theoretical model of the torus instability. Our model describes an MFR as a partial torus with foot points anchored in a conducting surface and numerically calculates various magnetic forces on it. This calculation yields better predictions of ${n}_{\mathrm{cr}}^{}$ that take into account the specific parameters of the MFR. Here, we describe a systematic methodology to properly translate laboratory results to their solar counterparts, provided that the MFRs have a sufficiently small edge safety factor or, equivalently, a large enough twist. After this translation, our model predicts that ${n}_{\mathrm{cr}}^{}$ in solar conditions falls near ${n}_{\mathrm{cr}}^{\mathrm{solar}}\sim 0.9$ and within a larger range of ${n}_{\mathrm{cr}}^{\mathrm{solar}}\sim (0.7,1.2)$, depending on the parameters. The methodology of translating laboratory MFRs to their solar counterparts enables quantitative investigations of CME initiation through laboratory experiments. These experiments allow for new physics insights that are required for better predictions of space weather events but are difficult to obtain otherwise.

79 ASTRONOMY AND ASTROPHYSICS↗

Development of in-use engine speed/torque heat maps across multiple heavy-duty commercial vehicle vocations

The U.S. Department of Energy (DOE) established the SuperTruck program with the goal of achieving brake thermal efficiency (BTE) greater than or equal to 55% as demonstrated in an operational heavy-duty (HD) diesel engine at a 65-miles-per-hour (mph) cruise point. Beyond the line-haul application, HD engines operate in a wide range of speed and torque conditions that are unlikely to yield the same efficiency under real-world operation. Thereby, the in-use engine heat maps described in this paper are a valuable tool to illustrate whether the engine-efficiency “sweet spot” matches the most frequent operating conditions. In this study, NREL developed engine heat maps to quantify the important operating points for various vocations using our Fleet DNA database of commercial fleet vehicle operations data. These heat maps clearly show that high-frequency operating points vary significantly according to vehicle vocation, while only a few of them match the sweet spot. Beyond the illustration, engine in-use heat maps can also be leveraged to build up reduced-order engine-efficiency models, needed by many rapid powertrain simulations. As case studies, nine reduced-order models – including line-haul truck, transfer truck, transit bus, transit bus with compressed natural gas (CNG) engine, drayage, refuse pickup, local delivery, utility truck, and school bus with CNG engine – using a trust-region reflective algorithm to fit the on-road data extracted based on the engine in-use heat maps.

33 ADVANCED PROPULSION SYSTEMS↗

11-th order of accuracy for numerical solution of 3-D Poisson equation with irregular interfaces on unfitted Cartesian meshes

For the first time the optimal local truncation error method (OLTEM) with 125-point stencils and unfitted Cartesian meshes has been developed in the general 3-D case for the Poisson equation for heterogeneous materials with smooth irregular interfaces. The 125-point stencils equations that are similar to those for quadratic finite elements are used for OLTEM. The interface conditions for OLTEM are imposed as constraints at a small number of interface points and do not require the introduction of additional unknowns, i.e., the sparse structure of global discrete equations of OLTEM is the same for homogeneous and heterogeneous materials. The stencils coefficients of OLTEM are calculated by the minimization of the local truncation error of the stencil equations. These derivations include the use of the Poisson equation for the relationship between the different spatial derivatives. Such a procedure provides the maximum possible accuracy of the discrete equations of OLTEM. In contrast to known numerical techniques with quadratic elements and third order of accuracy on conforming and unfitted meshes, OLTEM with the 125-point stencils provides 11-th order of accuracy, i.e., an extremely large increase in accuracy by 8 orders for similar stencils. The numerical results show that OLTEM yields much more accurate results than high-order finite elements with much wider stencils. The increased numerical accuracy of OLTEM leads to an extremely large increase in computational efficiency. Additionally, a new post-processing procedure with the 125-point stencil has been developed for the calculation of the spatial derivatives of the primary function. The post-processing procedure includes the minimization of the local truncation error and the use of the Poisson equation. It is demonstrated that the use of the partial differential equation (PDE) for the 125-point stencils improves the accuracy of the spatial derivatives by 6 orders compared to post-processing without the use of PDE as in existing numerical techniques. At an accuracy of 0.1% for the spatial derivatives, OLTEM reduces the number of degrees of freedom by 900 - 4∙10 6 times compared to quadratic finite elements. The developed post-processing procedure can be easily extended to unstructured meshes and can be independently used with existing post-processing techniques (e.g., with finite elements).

97 MATHEMATICS AND COMPUTING↗

Nuclear-level effective theory of 𝜇→𝑒 conversion: Formalism and applications

Over the next decade new 𝜇→𝑒 conversion searches at Fermilab (Mu2e) and J-PARC (COMET, DeeMe) are expected to advance limits on charged lepton flavor violation (CLFV) by more than four orders of magnitude. Here, by considering the consequence of 𝑃 and 𝐶⁢𝑃 on elastic 𝜇→𝑒 conversion and the structure of possible charge and current densities, we show that rates are governed by six nuclear responses and a single scale, 𝑞/𝑚 𝑁 , where 𝑞 ≈ 𝑚 𝜇 is the momentum transferred from the leptons to the nucleus. To relate this result to microscopic formulations of CLFV, we construct in nonrelativistic effective theory (NRET) the CLFV nucleon-level interaction, pointing out the relevance of the dimensionless scales 𝑦=($^{𝑞⁢𝑏}_2$) 2 ⁢ > |$\overrightarrow{𝑣}_N$⁢|>|$\overrightarrow{𝑣}_μ$⁢|>|$\overrightarrow{𝑣}_T$| , where 𝑏 is the nuclear size, $\overrightarrow{𝑣}_N$ and $\overrightarrow{𝑣}_μ$ are the nucleon and muon intrinsic velocities, and $\overrightarrow{𝑣}_T$ is the target recoil velocity. We discuss previous work, noting the lack of a systematic treatment of the various small parameters. Because the parameter 𝑦 is not small, a proper calculation of 𝜇→𝑒 conversion requires a full multipole expansion of the nuclear response functions, an apparently daunting task with Coulomb-distorted electron partial waves. We demonstrate that the multipole expansion can be carried out to high precision by introducing a simplifying local momentum 𝑞 eff for the electron. Previous work has been limited to simple charge or spin interactions, thereby treating the nucleus effectively as a point particle. We show that such formulations are not compatible with the general form of the 𝜇→𝑒 conversion rate, failing to generate three of the six allowed nuclear response functions. The inclusion of the nucleon velocity $\overrightarrow{𝑣}_N$ yields an NRET with 16 operators and a rate of the general form. Consequently, in the current discovery era for CLFV, it provides the most sensible starting point for experimental analysis, defining what can and cannot be determined about CLFV from the highly exclusive process of 𝜇→𝑒 conversion. Finally, we expand the NRET operator basis to account for the effects of $\overrightarrow{𝑣}_μ$, associated with the muon's lower component, generating corrections to the CLFV coefficients of the point-nucleus response functions. Using advanced shell-model methods, we compute 𝜇→𝑒 conversion rates for a series of experimental targets, deriving bounds on the coefficients of the CLFV operators. These calculations are the first to include a general basis of CLFV operators, full evaluation of the associated nuclear response functions, and an accurate treatment of electron and muon Coulomb effects. We discuss target selection as an experimental “knob” that can be turned to probe the microscopic origins of CLFV. We describe two types of coherence that enhance certain CLFV operators and selection rules that blind elastic 𝜇→𝑒 conversion to others. We discuss the matching of the NRET onto higher level effective field theories, such as those constructed at the light quark level, noting opportunities to build on existing work in direct detection of dark matter. We discuss the relation of 𝜇→𝑒 conversion to 𝜇→𝑒+𝛾 and 𝜇→3⁢𝑒, showing how MEG II and Mu3e results will complement those of Mu2e and COMET. Finally we describe a accompanying script—in Mathematica and Python versions—that can be used to compute 𝜇→𝑒 conversion rates in various nuclear targets for the full set of NRET operators.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Kinetic relaxation and nucleation of Bose stars in self-interacting wave dark matter

We revisit kinetic relaxation and soliton/boson star nucleation in fuzzy scalar dark matter featuring short-ranged self-interactions H int = − λ | ψ | 4 / 2 m 2 , alongside gravitational self-interactions. We map out the full curve of nucleation timescale for both repulsive ( λ < 0 ) and attractive ( λ > 0 ) short-ranged self-interaction strength and in doing so reveal two new points. Firstly, besides the two usual terms, ∝ G 2 and ∝ λ 2 , in the total relaxation rate Γ relax , there is an additional cross term ∝ G λ arising due to interference between gravitational and short-ranged self-interaction scattering amplitudes. This yields a critical repulsive interaction strength λ cr ≃ − 2 π G m 2 / v 0 2 , at which the relaxation rate is smallest and serves as the transition point between typical net attractive self-interaction ( λ ≳ λ cr ) and net repulsive self-interaction ( − λ ≳ − λ cr ). Secondly, while in the net attractive regime, nucleation timescale is similar to inverse relaxation timescale τ nuc ∼ Γ relax − 1 ; in the net repulsive regime, nucleation occurs at a delayed time τ nuc ∼ ( λ / λ cr ) Γ relax − 1 . We confirm our analytical understanding by performing 3D field simulations with varying average mass density ρ ¯ , box size L and grid size N . Published by the American Physical Society 2024

Astronomy & Astrophysics↗

New Synthetic Route to 4,6‐Diamino‐5,7‐dinitro‐benzo‐furazan, Important Decomposition Product of 1,3,5‐Triamino‐2,4,6‐trinitrobenzene

The important 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) decomposition byproduct, 4,6-diamino-5,7-dinitro-benzo-furazan (F 1 ), was prepared in a four-step reaction sequence starting with commercially available materials through a key intermediate, 4,6-dichloro-5,7-dinitro-benzo-furazan. The introduction of azido to 4,6-dichloro-benzo-furazan, followed by nitration and amination gave F 1 in good yield. This new method showed a greatly improved yield and ease of purification than previous methods (the total yield was 30%–40% in seven steps). F 1 is a stable yellow solid with a melting point of 308.7°C and a thermal decomposing temperature of 310.3°C (differential scanning calorimetry at 10°C/min heating rate). The solid-state structure was solved by single-crystal X-ray analyses at low temperatures (100 K). The compound crystallizes in a P 2 1 c space group with the formula C 6 H 4 N 6 O 5 •H 2 O with 12 molecules of F 1 /H 2 O in the unit cell. This compound has eluded complete characterization for almost 50 years. With this information, more advanced decomposition models can be created to further improve critical safety margins in handling the energetic material, TATB.

decomposition↗

Multipoint Aerostructural Optimization of Wind Turbine Rotors Using a Coupled Blade‐Resolved Aerostructural Solver

Physics‐based design optimization workflows thread the needle between computational cost limitations and simulation complexity, often compromising between modeling detail and the range of operating design conditions. Multipoint aerostructural optimization of wind turbine rotors has so far been confined to low‐fidelity analyses or to high‐fidelity studies with simplified structural models, leaving the most complex design trade‐offs unexplored. We close this gap by performing the first tightly coupled gradient‐based multipoint aerostructural rotor optimization using 3D aerodynamic and structural solvers with discrete coupled adjoints. The optimizer simultaneously varies blade planform, airfoil shapes, and structural thickness through more than 270 design variables, minimizing a weighted combination of rotor mass and power across multiple wind speeds. Applied to a modified DTU 10‐MW benchmark under conservative structural and aerodynamic constraints, our multipoint optimization reduces rotor mass by up to 36% and increases power by 12%–15% across the main operating conditions; biasing the objective toward power yields power gains up to 18% and a 17% mass reduction. For a nominal wind distribution, 3‐point rotor designs accounting for low RPM and high thrust conditions capture dominant trade‐offs and outperform single‐point designs. Adding two off‐design points changes individual‐condition power by less than 3% but leaves the weighted average within 0.5%, and the mass‐power bias has a stronger effect on the final design than the operating‐point weighting itself. Our framework extends naturally to richer load cases and site‐specific wind distributions, providing a basis for high‐fidelity multipoint design earlier in industrial workflows.

17 WIND ENERGY↗

K-shell radiation and bright spot characteristics of high-energy-density Fe-Cr-Ni plasmas influenced by X-pinch load geometry

K-shell radiation is diagnostically advantageous for the study of high-energy-density plasmas. Here, the current work investigates the influence of load geometry on K-shell x-rays in Z-pinch plasmas produced on the 1-MA Zebra generator. Stainless steel (Fe: 69%, Cr: 20%, Ni: 9%) X-pinch wire loads are fielded with an interwire angle of 31° (small-angle) or 62.5° (large-angle), respectively and studied using various x-ray diode, imaging, and spectroscopic diagnostics. The large-angle geometry produced large, individual x-ray-emitting bright spots (> 3 keV) at the wire cross-point averaging areas ≥ 1 mm 2 , with noteworthy soft x-ray (> 0.75 keV) bursts and radiation yields ≤ 14.6 kJ. The small-angle geometry produced multiple x-ray-emitting bright spots extending the pinch axis with smaller average sizes (≤ 0.5 mm 2 ), consistent with stronger current, increased radiation yield (≥ 15.5 kJ), and notable hard x-ray (> 9 keV) bursts, which peak with largest cumulative bright spot size. Spectroscopic analysis is performed with non-LTE collisional-radiative modeling, indicating a cold, nonthermal plasma region radiating from neutral to Ne-like ions, a hot, thermal region radiating from Fe and Cr He- and Li-like ions, and an intermediate region radiating Kα satellites from Li-like to O-like ions. Modeling of the nonthermal and satellite features imply a fractional hot electron abundance ~0.1% and ~0.5% for large- and small-angle geometries, respectively. Relative intensity analysis is performed on Heα and Kα lines, revealing intensity ratios that deviate from the original wire composition. Optical depth estimates allude to optically thick, thermal K-shell plasmas with densities consistent with non-LTE modeling.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗