Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wake modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Wakefield Calculations for Radiation Stopper 1 (RST1)

The main result of this note is that no wakefield mitigation is required for the Radiation Stopper (RST1) in the LCLS injector. The RST1 geometry is not symmetric in the vertical direction, and we derive a slight modification to the diffraction model wake for a cylindrically symmetric (2D) cavity that can be used for this problem. Performing a full 3D MAFIA calculation for the nominal 1 mm (rms) long bunch, we show that the modified diffraction model well describes the wakefields generated in RST1. The results imply an on-axis emittance growth of 0.0075%, well below the 0.5% tolerance threshold. To reach the 0.5% threshold the beam would need to be mis-steered by a large amount - 7 mm - from the axis. One reason that the effect is small is that the beta functions at the RST1 are small.

43 PARTICLE ACCELERATORS↗

Wake characteristics of buildings in disturbed boundary layers

Measurements relevant to the effect of buildings on the low level atmospheric boundary layer are presented. Field measurements of velocity and turbulence in the wake of a block building 3.2 m high and 26.8 m long are presented which show an apparent increase in momentum flow above the upwind value. Velocity-deficit and turbulence-excess decay characteristics of the disturbed or nonequilibrium layer are correlated with power law exponents and apparent roughness length at various distances downstream of the disturbance. Model wake profiles from the simulated building are compared at various stations for equilibrium and nonequilibrium upstream profiles. Empirical correlations relating building wake profiles to upstream nonequilibrium parameters are presented. The relationship of the data to the smooth-rough transition is discussed, and a flow model is presented.

Logan, E., Jr.↗

The prediction of blade wake interaction noise based on a turbulent vortex model

Blade wake interaction is defined as the broadband noise generated by the interaction of helicopter rotor blades with their own wake. Experimental observations have shown that this is a strong function of advance ratio and tip path plane angle. This paper describes how this noise source can be associated with the blade vortex interactions in the forward sector of the rotor. Measured levels of turbulence in the vortex core are used to predict the broadband noise levels with some success. However, more detailed information on the turbulence spectrum and the trajectory of the shed vortices is required before more accurate noise predictions can be made.

Glegg, Stewart A. L.↗

The appliation of potential CFD methods to helicopter hover flows

Fixed-wing code development is now aimed primarily at the solution of problems dominated by separation--based on the assumptions that the ability to solve such problems implies the ability to solve all other problems and that present inviscid method are already adequate for most other problems. Neither of the above assumptions are correct for rotary wing problems. This is because of the unique and overriding importance of wake modeling to rotor problems and also due to the well-known numerical diffusion problems which convectional Eulerian Computational fluid dynamics (CFD) method encounter when called on to convect strong vortical regions for long distances. The need for accurate wake analyses is probably the most fundamental difference between rotory and fixed-wing aerodynamics. In addition, rotary wing complexity requires a much more intimate relationship between test and analysis than is common in fixed-wing work. With these issues in mind, this paper will review some of our recent experience in using a unique-Eulerian-Lagrangian Computational fluid dynamics (CFC) method for the solution of a critical rotor-wake problem--the prediction of hover performance.

Caradonna, F. X.↗

Euler solutions for self-generated rotor blade-vortex interactions

A finite-difference procedure was developed, on the basis of the conservation form of the unsteady three-dimensional Euler equations, for the prediction of rotor blade-vortex interactions (BVIs). Numerical solution procedures were obtained for the analysis of the model parallel BVIs and the more realistic helicopter self-generated-rotor BVIs. It was found that, for self-generated subcritical interactions, the accuracy of the predicted leading edge pressures relied heavily on the user-specified vortex core radius and on the CAMRAD-code-predicted geometry of the interaction vortex elements and their relative orientation with respect to the blade. It was also found that the free-wake model used in CAMRAD to predict the tip vortex trajectory for use in the Euler solution yields lower streamwise and higher axial wake convective velocities than those inferred from the experimental data.

Hassan, A. A.↗

The prediction of loads on the Boeing Helicopters Model 360 rotor

Results are presented from a test/theory correlation investigation involving three rotor-analysis codes, two full potential rotor flow CFD solvers, and data obtained from tests on the Model 360 helicopter's rotor. Attention is given to the problem of reliable higher harmonic loading prediction. It is found that the rotor hover performance and loading experimental data are in excellent agreement with a novel, full potential free-wake computational technology; the need for a multiple tip-vortex wake model's use in predicting vibratory airloads is confirmed.

Dadone, Leo↗

Tools for Assessing Performance (TAP) Project: FY2023 Quarter 2 Report

LANL personnel presented TAP-sponsored work at the 103 rd Annual Meeting of the American Meteorological Society, which was held in Denver, CO in January 2023. There were four different presentations related to TAP-sponsored work that were given by LANL staff and studentsat this meeting: (1) Gloeckler, T., M. Nelson, H. Shah, M. Deshler, L. Wedell, R. Linn, N. Duboc, S. Pol, P. Bieringer, A. Annunzio, B. Martin, and H. Tinnesand, 2023. Testing Validity and Limitations of a Low-Order Diffusive Wake Model. 15 th Symposium on the Urban Environment, January 8-12, 2023, Denver, CO, U.S.A. (2) Nelson, M., H. Shah, T. Gloeckler, M. Deshler, L. Wedell, A. Ortega, R. Linn, N. Duboc, P. Conry, S. Pol, and H. Tinnesand, 2023. The Isolated Building Wake Experiment. Paper 1A.1. 24 th Symposium on Boundary Layers and Turbulence, January 8-12, 2023. Denver, CO, U.S.A. (3) Shah, H., M. Nelson, S. Pol, R. Linn, N. Duboc, and H. Tinnesand, 2023. Detailed Measurement of a Building Wake Under Real-World Atmospheric Conditions. Poster 102. 24 th Symposium on Boundary Layers and Turbulence, January 8-12, 2023, Denver, CO, U.S.A. (4) Wedell, L., M. Nelson, H. Shah, T. Gloeckler, M. Deshler, R. Linn, S. Pol, H. Tinnesand, 2023. The Isolated Building Wake Experiment: Using a Rotating Building to Mulitply the Number of Wake Measurement Locations without Moving the Instruments. Paper 1A.4A. 24 th Symposium on Boundary Layers and Turbulence, January 8-12, 2023, Denver, CO, U.S.A.

54 ENVIRONMENTAL SCIENCES↗

Three-dimensional structure of wind turbine wakes as measured by scanning lidar

Abstract. The lower wind speeds and increased turbulence that are characteristic of turbine wakes have considerable consequences on large wind farms: turbines located downwind generate less power and experience increased turbulent loads. The structures of wakes and their downwind impacts are sensitive to wind speed and atmospheric variability. Wake characterization can provide important insights for turbine layout optimization in view of decreasing the cost of wind energy. The CWEX-13 field campaign, which took place between June and September 2013 in a wind farm in Iowa, was designed to explore the interaction of multiple wakes in a range of atmospheric stability conditions. Based on lidar wind measurements, we extend, present, and apply a quantitative algorithm to assess wake parameters such as the velocity deficits, the size of the wake boundaries, and the location of the wake centerlines. We focus on wakes from a row of four turbines at the leading edge of the wind farm to explore variations between wakes from the edge of the row (outer wakes) and those from turbines in the center of the row (inner wakes). Using multiple horizontal scans at different elevations, a three-dimensional structure of wakes from the row of turbines can be created. Wakes erode very quickly during unstable conditions and can in fact be detected primarily in stable conditions in the conditions measured here. During stable conditions, important differences emerge between the wakes of inner turbines and the wakes of outer turbines. Further, the strong wind veer associated with stable conditions results in a stretching of the wake structures, and this stretching manifests differently for inner and outer wakes. These insights can be incorporated into low-order wake models for wind farm layout optimization or for wind power forecasting.

17 WIND ENERGY↗

RABBIT: A Rapid Low Fidelity BVI Prediction Tool—Comparison and Validation using the NASA RVLT Toolchain

Rotorcraft noise source identification is at the forefront of civil rotorcraft applications with the emergence of the Urban Air Mobility (UAM) market. Blade Vortex Interaction (BVI) has been identified as one key source of noise produced by a rotor. To predict BVI occurrences for various Urban Air Mobility (UAM) configurations, the RApid Blade and Blade-Vortex InTeraction (RABBIT) tool was developed and utilized. The tool is built from a Beddoes Wake Model, and computes variables such as miss distance and BVI angle to calculate an impulse factor, which is able to visualize BVI for a given vehicle and flight condition. A complete checkout of this tool and comparison with CAMRADII and ANOPP2/AARON, is performed. A wake comparison between RABBIT and CAMRADII is presented, and BVI is compared with ANOPP2/AARON’s acoustic pressure time history to verify the tools effectiveness and accuracy. Three NASA Revolutionary Vertical Lift Technology (RVLT) concept vehicles were analyzed with increasing geometric and aerodynamic complexity, including the Quiet Single Main Rotor (QSMR), Side-by-Side, and Quadrotor. An analysis of the results concludes that RABBIT presents a low-fidelity tool that accurately predicts BVI location and intensity for multiple vehicle configurations and various flight conditions.

RABBIT↗

Report of the Ad Hoc Committee on the assessment of models of a wake shield environment around various spacecraft, Universities Space Research Association

Models depicting the ambient atmosphere which can overtake the spacecraft vacuum shield are presented. The subject areas discussed are: possible changing effects on the wake shield environment; possible utilization of the induced environmental contamination monitor; present state of the knowledge of the parameters used to describe the intermolecular collisions; the possibility of using simple models to describe the wake shield environment; possible errors associated with using kinetic theory to calculate that part of the atmosphere overtaking the shield; and a general assessment of the Monte Carlo techniques used to calculate the shield environment.

Wu, S. T.↗

Application of a comprehensive analytical model of rotorcraft aerodynamics and dynamics (CAMRAD) to the McDonnell Douglas AH-64A helicopter

CAMRAD results on main rotor blade natural frequency and structural loads predictions are compared to flight test data and predictions of the Dynamic Analysis Research Tool (DART) and the Rotor/Airframe Comprehensive Aeroelastic Program (RACAP). Consideration is also given to the effects of various analytical options available in CAMRAD including dynamic stall, wake modeling, and the number of bending and torsion degrees of freedom included in the structural analysis. It is concluded that, while several modeling limitations are identified in the CAMRAD structural analyses, the structural loads predictions are as accurate as analysis codes which provide more representative models of the complex geometries and structures of the AH-64A rotor system. However, it is noted that the CAMRAD analysis cannot be considered fully reliable for dynamic predictions for more advanced bearingless rotor designs being proposed for future AH-64 configurations.

Callahan, C.↗

Wake Vortex Inverse Model User's Guide

NorthWest Research Associates (NWRA) has developed an inverse model for inverting landing aircraft vortex data. The data used for the inversion are the time evolution of the lateral transport position and vertical position of both the port and starboard vortices. The inverse model performs iterative forward model runs using various estimates of vortex parameters, vertical crosswind profiles, and vortex circulation as a function of wake age. Forward model predictions of lateral transport and altitude are then compared with the observed data. Differences between the data and model predictions guide the choice of vortex parameter values, crosswind profile and circulation evolution in the next iteration. Iterations are performed until a user-defined criterion is satisfied. Currently, the inverse model is set to stop when the improvement in the rms deviation between the data and model predictions is less than 1 percent for two consecutive iterations. The forward model used in this inverse model is a modified version of the Shear-APA model. A detailed description of this forward model, the inverse model, and its validation are presented in a different report (Lai, Mellman, Robins, and Delisi, 2007). This document is a User's Guide for the Wake Vortex Inverse Model. Section 2 presents an overview of the inverse model program. Execution of the inverse model is described in Section 3. When executing the inverse model, a user is requested to provide the name of an input file which contains the inverse model parameters, the various datasets, and directories needed for the inversion. A detailed description of the list of parameters in the inversion input file is presented in Section 4. A user has an option to save the inversion results of each lidar track in a mat-file (a condensed data file in Matlab format). These saved mat-files can be used for post-inversion analysis. A description of the contents of the saved files is given in Section 5. An example of an inversion input file, with preferred parameters values, is given in Appendix A. An example of the plot generated at a normal completion of the inversion is shown in Appendix B.

Lai, David↗

A computational method for helicopter vortex wakes

A method for calculating the wake geometry and blade loads for a hovering helicopter rotor is presented. The approach incorporates a simplified free wake model of the rotor in a finite difference calculation of the flow field. A variation of the 'cloud-in-cell' technique, modified to eliminate self-induced velocity errors for curved vortex filaments, is used. Simple lifting line theory is used to calculate the blade loads. Calculations showing the effect of vortex core size and the number of vortex filaments representing the wake are presented. For large numbers of vortices, it is seen that the wake geometry fails to converge. However, only a few vortices are needed to adequately represent the wake. Comparisons with experimental results are also presented.

Roberts, T. W.↗

Review of Reactive Power Dispatch Strategies for Loss Minimization in a DFIG-based Wind Farm

This study reviews and compares the performance of reactive power dispatch strategies for the loss minimization of Doubly Fed Induction Generator (DFIG)-based Wind Farms (WFs). Twelve possible combinations of three WF level reactive power dispatch strategies and four Wind Turbine (WT) level reactive power control strategies are investigated. All of the combined strategies are formulated based on the comprehensive loss models of WFs, including the loss models of DFIGs, converters, filters, transformers, and cables of the collection system. Optimization problems are solved by a Modified Particle Swarm Optimization (MPSO) algorithm. The effectiveness of these strategies is evaluated by simulations on a carefully designed WF under a series of cases with different wind speeds and reactive power requirements of the WF. The wind speed at each WT inside the WF is calculated using the Jensen wake model. The results show that the best reactive power dispatch strategy for loss minimization comes when the WF level strategy and WT level control are coordinated and the losses from each device in the WF are considered in the objective.

17 WIND ENERGY↗

CALCULATING POINT-CHARGE WAKEFIELDS FROM FINITE LENGTH BUNCH WAKE-POTENTIALS

Starting from analytical properties of high frequency geometric impedance we show how one can accurately calculate short bunch wake-potentials (and even point-charge wakefields) from time domain calculations performed with a much longer bunch. In many practical instances this drastically reduces the need for computer resources, speeds up the calculations, and improves their accuracy. To illustrate this method we give examples for 2D accelerator structures of various complexities. We describe preliminary results of a new method that allows us to accurately obtain longitudinal wakefields of short bunches by adding a long-bunch result from an EM solver and a singular analytical wake model. In the future this work will be generalized to 3D geometries as well. Similarly, the method should be equally applicable to the calculations of transverse wakefields. Periodic structures with a significant number of periods (2 {ge} a{sup 2}/{sigma}L, where L is the period length) have not been considered so far. They have asymptotic wakefields that differ from the examples described above. We believe this method is applicable to such geometries as well, as long as correct asymptotic solutions are used.

43 PARTICLE ACCELERATORS↗

Preliminary comparison of model and prototype wakes

Velocity and turbulence profiles previously measured in the wake of a long building 3.2 m high, located in the field, transverse to the wind and in an atmospheric boundary layer several hundred meters thick are compared with wake profiles at corresponding longitudinal stations for a scale model of the building located in a large meteorological wind tunnel having a boundary layer thickness of 0.61 m to assess the accuracy of full scale wake profile predictions based on model tests. Results are presented which show that disparities in nondimensional profiles result from differences in relative depth of logarithmic layers and in surface conditions.

Logan, E., Jr.↗

The Aerodynamics of the Curled Wake: A Simplified Model in View of Flow Control

When a wind turbine is yawed, the shape of the wake changes and a curled wake profile is generated. The curled wake has drawn a lot of interest because of its aerodynamic complexity and applicability to wind farm controls. The main mechanism for the creation of the curled wake has been identified in the literature as a collection of vortices that are shed from the rotor plane when the turbine is yawed. This work extends that idea by using aerodynamic concepts to develop a control-oriented model for the curled wake based on approximations to the Navier-Stokes equations. The model is tested and compared to large-eddy simulations using actuator disk and line models. The model is able to capture the curling mechanism for a turbine under uniform inflow and in the case of a neutral atmospheric boundary layer. Here, the model is then tested inside the FLOw Redirection and Induction in Steady State framework and provides excellent agreement with power predictions for cases with two and three turbines in a row.

17 WIND ENERGY↗