Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “voltage acceleration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Energy Loss And Beam Transport Properties of Gas Cluster Ion Beams

Energy losses of a gas cluster ion beam (GCIB) after collisions with residual gases were studied for Ar and CO{sub 2} GCIBs. From the energy distribution of an Ar GCIB after collisions at various acceleration voltages and cluster sizes, it is found that GCIB lost its energy when its energy per atom was high. In addition, the energy loss of CO{sub 2} GCIB was moderate compared to that of Ar GCIB at the same cluster size because of strong binging energy of CO{sub 2} molecules. The energy loss mainly occurs as decrease of its cluster size. The number of the scattered atoms or molecules linearly increased with the energy per atom or molecule. The reduction of cluster size is determined by the energy/atom and the cohesive energy of the gas.

74 ATOMIC AND MOLECULAR PHYSICS↗

Nano-cell Fabrication Using the Behavior of Point Defects Induced by Ion Implantation

The authors' finding that cellular structure is formed on the GaSb, InSb and Ge surfaces by ion implantation is introduced. A novel nano-fabrication technique based on the authors' discovery, which consists of a top-down process and a bottom-up process, is performed on a GaSb surface using focused ion beam. In the top-down procedure, a two-dimensional lattice of voids (initial structure) is created by irradiation with a focused ion beam. Then, the bottom-up process for developing the initial structure into nano-cell structures is performed using the image scanning mode of FIB. The structure is observed by FIB and SEM. The possibilities of the new technique are examined, varying the ion acceleration voltage and the ion dose.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Combined electron backscatter diffraction and cathodoluminescence measurements on CuInS{sub 2}/Mo/glass stacks and CuInS{sub 2} thin-film solar cells

Electron backscatter diffraction (EBSD) and cathodoluminescence (CL) measurements in a scanning electron microscope were performed on cross sections of CuInS{sub 2} thin films and ZnO/CdS/CuInS{sub 2}/Mo/glass thin-film solar cells. The CuInS{sub 2} layers analyzed for the present study were grown by a rapid thermal process. The regions of the CuInS{sub 2} layers emitting high CL intensity of band-band luminescence are situated near the top surface (or close to the interface with ZnO/CdS). This can be attributed to an enhanced crystal quality of the thin films in this region. The phenomenon may be related to the recrystallization via solid-state reactions with Cu{sub x}S phases, which is assumed to run from the top to the bottom of the growing CuInS{sub 2} layer. The distribution of CL intensities is independent of the sample temperature, the acceleration voltage of the electron beam, and of whether or not the ZnO/CdS window layers are present. When comparing CL images and EBSD maps on identical sample positions, pronounced intragrain CL contrast is found for individual grains. Also, it is shown that at random grain boundaries, the decreases in CL intensities are substantially larger than at {Sigma}3 grain boundaries.

36 MATERIALS SCIENCE↗

Zeeman polarimetry measurement for edge current density determination using Li-beam probe on JT-60U

Zeeman polarimetry system using Li-beam probe has been developed for the edge current density measurement in the JT-60U tokamak, which measures the polarization angle {alpha} (related to the pitch angle of the magnetic field) by means of photoelastic modulators, etalons, and phase sensitive detection using digital lock-in amplifiers with the accuracy in the {alpha} of {Delta}{alpha}{approx}0.1 deg. The diagnostic has 20-channel viewing chords covering the plasma peripheral region of normalized minor radius r/a{approx}0.8-1 with a spatial resolution of up to {approx}1 cm. Li-beam injection with beam current of up to {approx}5 mA has been achieved. A new tuning method of the wavelength for the etalon has been demonstrated, scanning the beam acceleration voltage and keeping a beam current constant during a single shot. The peak wavelength of the etalon is adjusted in the direction to both blue- and redshifts by changing the angle of incidence and increasing the temperature, respectively. Time evolution of the edge current density profile has been determined for the current ramp experiment in the Ohmically heated discharges. In addition, the edge current density profile with the local peak of j{sub ped}{approx}0.15-0.25 MA/m{sup 2} at r/a{approx}0.9 has been identified in the H-mode plasma, which is correlated with large pressure gradient in the pedestal region.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Enhanced resistance of single-layer graphene to ion bombardment

We report that single-layer graphene on a SiO{sub 2}/Si substrate withstands ion bombardment up to {approx}7 times longer than expected when exposed to focused Ga{sup +} ion beam. The exposure is performed in a dual beam scanning electron microscope/focused ion beam system at 30 kV accelerating voltage and 41 pA current. Ga{sup +} ion flux is determined by sputtering a known volume of hydrogenated amorphous carbon film deposited via plasma-enhanced chemical vapor deposition.

36 MATERIALS SCIENCE↗

Cherenkov electromagnetic instability excited by an oscillating relativistic electron beam in ion channel

The Cherenkov electromagnetic instability excited by an oscillating relativistic electron beam in ion channel has been studied. It is shown that the complex boundary with beam-ion channel-plasma system and the perturbation of electrons induce several electromagnetic-electrostatic hybrid slow waves, which offer the possibility to excite the instability. Under such conditions, the electronic betatron motion plays a decisive role in exciting the instability. The necessary and sufficient conditions inducing the instability have been given, and related physical mechanisms have been discussed. Furthermore, the influence of the parameters, such as accelerating voltage, on the width of instability band and the growth rate of the instability has been given.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Grating spectrometer system for beam emission spectroscopy diagnostics using high-energy negative-ion-based neutral beam injection on LHD

A beam emission spectroscopy (BES) system was developed for density gradient and fluctuation diagnostics in the Large Helical Device (LHD). In order to cover the large Doppler shift of the H{alpha} beam emission because of the high-energy negative-ion-based neutral beam atom (acceleration voltage V{sub acc}=90-170 kV) and the large motional Stark splitting due to the large vxB field (magnetic field B=3.0 T), a grating spectrometer was used instead of a conventional interference filter system. The reciprocal linear dispersion is about 2 nm/mm, which is sufficient to cover the motional Stark effect spectra using an optical fiber with a diameter of 1 mm.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Generation of 3 GW microwave pulses in X-band from a combination of a relativistic backward-wave oscillator and a helical-waveguide compressor

The phenomenon of passive compression of frequency-modulated (FM) pulses in a dispersive media (DM) was used to increase the peak microwave power up to the multigigawatt level. A helically corrugated waveguide was used as the DM, while a relativistic X-band backward-wave oscillator (RBWO) with a descending-during-the-pulse accelerating voltage served as a source of FM pulses. Compression of pulses down to a halfwidth of 2.2 ns accompanied by a 4.5-fold power increase up to a value of about 3.2 GW has been demonstrated.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Effects of spontaneous polarization on GaInN/GaN quantum well structures

Using electron beam irradiation, cathodoluminescence, and photoluminescence under ultrahigh vacuum conditions, we study the effect of spontaneous polarization on polar (0001) and nonpolar (1100) GaInN/GaN quantum well structures. We use cathodoluminescence measurements with an electron beam irradiation time of up to several hours. A drastic blueshift of the quantum well emission accompanied by a 100-fold increase of intensity is observed in polar samples. These changes can be described by an activation of the spontaneous polarization field due to the desorption of surface charges, which counteracts the piezoelectric field in the quantum well. Etching or annealing of the surface leads to similar effects. The influence of the sample structure was investigated by varying the cap thickness of the samples. A different time- dependent behavior of changes in the quantum well emission energy and the intensity depending on cap thickness and acceleration voltage was observed. This can be explained by de-screening and screening effects induced by the electron beam which are discussed in detail. For nonpolar (1100) samples, no change in quantum well emission energy or intensity was observed. This is consistent with a spontaneous-polarization-induced surface field in the c-plane case and verifies the absence of the spontaneous polarization field in the nonpolar (1100) direction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Correlation between resistance-change effect in transition-metal oxides and secondary-electron contrast of scanning electron microscope images

Conductive atomic-force microscopy (C-AFM) writing is attracting attention as a technique for clarifying the switching mechanism of resistive random-access memory by providing a wide area filled with filaments, which can be regarded as one filament with large radius. The writing area on a nickel-oxide (NiO) film formed by conductive atomic-force microscopy was observed by scanning electron microscope, and a correlation between the contrast in a secondary-electron image (SEI) and the resistance written by C-AFM was revealed. In addition, the dependence of the SEI contrast on the beam accelerating voltage (V{sub accel}) suggests that the resistance-change effect occurs near the surface of the NiO film. As for the effects of electron irradiation and vacuum annealing on the C-AFM writing area, it was shown that the resistance-change effect is caused by exchange of oxygen with the atmosphere at the surface of the NiO film. This result suggests that the low-resistance and high-resistance areas are, respectively, p-type Ni{sub 1+{delta}}O ({delta} < 0) and insulating (stoichiometric) or n-type Ni{sub 1+{delta}}O ({delta}{>=} 0).

36 MATERIALS SCIENCE↗

Commissioning of heating neutral beams for COMPASS-D tokamak

Two neutral beam injectors have been developed for plasma heating on COMPASS-D tokamak (Institute of Plasma Physics, Prague). The 4-electrodes multihole ion-optical system with beam focusing was chosen to provide the low divergence 300 kW power in both deuterium and hydrogen atoms. The accelerating voltage is 40 kV at extracted ion current up to 15 A. The power supply system provides the continuous and modulated mode of the beam injection at a maximal pulse length 300 ms. The optimal arrangement of the cryopanels and the beam duct elements provides sufficiently short-length beamline which reduces the beam losses. The evolution of the impurities and molecular fraction content is studied in the process of the high voltage conditioning of the newly made ion sources. Two injectors of the same type have been successfully tested and are ready for operation at tokamak in IPP, Prague.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Controlling the electrical properties of ZnO films by forming zinc and oxide bridges by a plasma and electron-assisted process

A new method to produce electrically steady ZnO films without any heating process has been developed by using plasma and electron beams to facilitate bonding between the metallic component and the oxygen on coated ZnO films. Both plasma atmosphere and electron beams can function as sources of nonequilibrium bonding energy, forming bridges between the zinc present in the zinc complex and the oxygen in the ZnO particles to construct a zinc-oxide thin film. Our results confirm that it is possible to achieve low conductive characteristics by controlling the acceleration voltage of electrons used to irradiate the ZnO coating. The electrically steady films fabricated have various potential applications, being particularly well-suited to electrical devices on a plastic medium.

36 MATERIALS SCIENCE↗

Integration of a broad beam ion source with a high-temperature x-ray diffraction vacuum chamber

Here, the integration of a low energy, linearly variable ion beam current density, mechanically in situ adjustable broad beam ion source with a high-temperature x-ray diffraction (XRD) vacuum chamber is reported. This allows in situ XRD investigation of phase formation and evolution processes induced by low energy ion implantation. Special care has been taken to an independent adjustment of the ion beam for geometrical directing towards the substrate, a 15 mm small ion source exit aperture to avoid a secondary sputter process of the chamber walls, linearly variable ion current density by using a pulse length modulation (PLM) for the accelerating voltages without changing the ion beam density profile, nearly homogeneous ion beam distribution over the x-ray footprint, together with easily replaceable Kapton{sup Registered-Sign} windows for x-rays entry and exit. By combining a position sensitive x-ray detector with this PLM-modulated ion beam, a fast and efficient time resolved investigation of low energy implantation processes is obtained in a compact experimental setup.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electron-optical systems for planar gyrotrons

The methodology of designing an electron-optical system (EOS) that forms sheet helical electron beams (HEBs) for high-power gyrotrons is developed. As an example, we consider the EOS for a 140-GHz gyrotron operated at the first harmonic of the cyclotron frequency with an accelerating voltage of 50 kV, a beam current of 30 A, and a magnetic field compression of 36. A planar geometry of the magnetron-injection gun (MIG) is suggested. The adiabatic theory of MIGs modified for the planar geometry of EOS is used for preliminary estimations of MIG parameters. Numerical simulation of the HEB properties based on the CST STUDIO SUITE 3D code is performed to find the optimal configuration of a planar MIG. The accuracy of the calculated data is discussed. The main factors that affect the HEB quality are considered. It is shown that a sheet HEB with a pitch-factor of 1.3 and velocity spread not exceeding 25%–30% can be formed; this is quite acceptable for high-efficiency operation of modern gyrotrons. Calculation of the beam-wave interaction with the obtained HEB parameters proved that a high output power with a sufficiently good efficiency of about 20% can be reached. Simulations show the feasibility of the experimental implementation of a novel planar EOS and its use in short-wave planar gyrotrons. The developed technique can be used for the study and optimization of planar gyrotrons of different frequency bands and power levels.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Comparison of crystal growth and thermoelectric properties of n-type Bi-Se-Te and p-type Bi-Sb-Te nanocrystalline thin films: Effects of homogeneous irradiation with an electron beam

The effects of homogenous electron beam (EB) irradiation on the crystal growth and thermoelectric properties of n-type Bi-Se-Te and p-type Bi-Sb-Te thin films were investigated. Both types of thin films were prepared by flash evaporation, after which homogeneous EB irradiation was performed at an acceleration voltage of 0.17 MeV. For the n-type thin films, nanodots with a diameter of less than 10 nm were observed on the surface of rice-like nanostructures, and crystallization and crystal orientation were improved by EB irradiation. The resulting enhancement of mobility led to increased electrical conductivity and thermoelectric power factor for the n-type thin films. In contrast, the crystallization and crystal orientation of the p-type thin films were not influenced by EB irradiation. The carrier concentration increased and mobility decreased with increased EB irradiation dose, possibly because of the generation of defects. As a result, the thermoelectric power factor of p-type thin films was not improved by EB irradiation. The different crystallization behavior of the n-type and p-type thin films is attributed to atomic rearrangement during EB irradiation. Selenium in the n-type thin films is more likely to undergo atomic rearrangement than the other atoms present, so only the crystallinity of the n-type Bi-Se-Te thin films was enhanced.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Focusing of intense and divergent ion beams in a magnetic mass analyzer

A magnetic mass analyzer is used to determine the beam composition of a vacuum arc ion source. In the analyzer, we used the concentric multi-ring electrodes to focus the intense and divergent ion beams. We describe the principle, design, and the test results of the focusing device. The diameter of the beam profile is less than 20 mm when the accelerating voltage is 30 kV and the focusing voltage is about 2.0 kV. The focusing device has been successfully used in the magnetic mass analyzer to separate Ti{sup +}, Ti{sup 2+}, and Ti{sup 3+}.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Terahertz electromagnetic wave generation and amplification by an electron beam in the elliptical plasma waveguides with dielectric rod

The propagation of electromagnetic waves in an elliptical plasma waveguide including strongly magnetized plasma column and a dielectric rod is investigated. The dispersion relation of guided hybrid electromagnetic waves is obtained. Excitation of the waves by a thin annular relativistic elliptical electron beam will be studied. The time growth rate of electromagnetic waves is obtained. The effects of relative permittivity constant of dielectric rod, radius of dielectric rod, accelerating voltage, and current density of the annular elliptical beam on the growth rate and the frequency spectra are numerically presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of stress on optical transitions in GaN nanorods containing a single InGaN/GaN quantum disk

Cathodoluminescence (CL) hyperspectral imaging has been performed on GaN nanorods containing a single InGaN quantum disk (SQD) with controlled variations in excitation conditions. Two different nanorod diameters (200 and 280 nm) have been considered. Systematic changes in the CL spectra from the SQD were observed as the accelerating voltage of the electron beam and its position of incidence are varied. It is shown that the dominant optical transition in the SQD varies across the nanorod as a result of interplay between the contributions of the deformation potential and the quantum-confined Stark effect to the transition energy as consequence of radial variation in the pseudomorphic strain.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗