SEARCH · Engineering Papers

Results for “vehicle data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS1982

A Shuttle Upper Atmosphere Mass Spectrometer /SUMS/ experiment

A magnetic mass spectrometer is currently being adapted to the Space Shuttle Orbiter to provide repeated high altitude atmosphere data to support in situ rarefied flow aerodynamics research, i.e., in the high velocity, low density flight regime. The experiment, called Shuttle Upper Atmosphere Mass Spectrometer (SUMS), is the first attempt to design mass spectrometer equipment for flight vehicle aerodynamic data extraction. The SUMS experiment will provide total freestream atmospheric quantitites, principally total mass density, above altitudes at which conventional pressure measurements are valid. Experiment concepts, the expected flight profile, tradeoffs in the design of the total system and flight data reduction plans are discussed. Development plans are based upon a SUMS first flight after the Orbiter initial development flights.

Blanchard, R. C.↗

NASA NTRS2001

The Analysis and Modeling of the Deployment of NASA's X-38 Parafoil

NASA is currently working on developing the X-38 Crew Return Vehicle for the Internati6nal Space Station (ISS). The aerodynamics of the X-38 and its enormous 7500 square ft parafoil are extremeJy complicated and must be understood and modeled accurately before the vehicle is actually used for human space flight. A large amount of analysis has been performed on the steady state regions of the flight profile when the parafoil is already open. However, the deployment region of the flight profile has not been analyzed in much depth and is a particularly complicated dynamic flight period. During deployment, the X-38 system has its parafoil open up to its full area in five stages over a period of 20-30 seconds. The vehicle transitions from angles of attack around 90 deg to 0 deg in about two seconds and is extremely dynamic. This paper will detail the analysis work done to generate accurate flight profile characteristics of the deployment from flight data from vehicle test drops. Additionally, a computer simulation tool for steady state flight was modified to analyze and model the parafoil deployment. Eventually, a computer model was produced that generated accurate representations of the parafoil deployment dynamics for the vehicle test drops to date.

Ranier, Chris↗

NASA NTRSDate not supplied

Lessons Learned from Aerothermal Flight Data on NASA Mars Entry Vehicles

The NASA Mars Science Laboratory (MSL) and Mars 2020 entry vehicles included temperature measurements inside and direct heat flux on the surface of the thermal protection system (TPS) material. The instrumentation was included to begin addressing predictive capabilities for aerodynamic heating and ablative TPS material response. The MSL aeroshell included temperature measurements at seven heatshield locations, from which total aerodynamic heating was reconstructed. The Mars 2020 instrumentation suite included eleven heatshield measurement locations and new backshell measurements at nine locations: six with temperature sensors, two with sensors to directly measure total heat flux, and one to measure radiative heat flux. Both instrumentation suites returned full sets of data, with all temperature sensors nearest to the surface surviving entry, indicating minimal material recession. Heatshield boundary layer transition (BLT) was observed for both vehicles prior to the time of peak heating, with transition starting near the shoulder and progressing towards the stagnation area. MSL’s higher speed on approach to Mars resulted in higher total heating compared to Mars 2020, with the maximum occurring near the heatshield’s leeside shoulder. The Mars 2020 backshell heating data indicate significant contributions from shock layer radiation. Heating from Navier-Stokes flowfield calculations are in family with reconstructed heating. The paper covers the instrumentation, BLT and reconstructed heating on both heatshields, backshell heating for Mars 2020, TPS performance, and predicted versus reconstructed heat fluxes. Opportunities for improved design approaches for future Mars missions are discussed, especially for the upcoming Mars Sample Return mission.

Mars Science Laboratory↗

NASA NTRSDate not supplied

Lessons Learned from Aerothermal Flight Data on NASA Mars Entry Vehicles

Mars Science Laboratory↗

NASA NTRS1966

Surveyor mission operations system

Functional description of launch vehicle, tracking and data acquisition, spacecraft, and mission operations of Surveyor mission

LAUNCH VEHICLE↗

NASA NTRS2009

Telemetry Boards Interpret Rocket, Airplane Engine Data

For all the data gathered by the space shuttle while in orbit, NASA engineers are just as concerned about the information it generates on the ground. From the moment the shuttle s wheels touch the runway to the break of its electrical umbilical cord at 0.4 seconds before its next launch, sensors feed streams of data about the status of the vehicle and its various systems to Kennedy Space Center s shuttle crews. Even while the shuttle orbiter is refitted in Kennedy s orbiter processing facility, engineers constantly monitor everything from power levels to the testing of the mechanical arm in the orbiter s payload bay. On the launch pad and up until liftoff, the Launch Control Center, attached to the large Vehicle Assembly Building, screens all of the shuttle s vital data. (Once the shuttle clears its launch tower, this responsibility shifts to Mission Control at Johnson Space Center, with Kennedy in a backup role.) Ground systems for satellite launches also generate significant amounts of data. At Cape Canaveral Air Force Station, across the Banana River from Kennedy s location on Merritt Island, Florida, NASA rockets carrying precious satellite payloads into space flood the Launch Vehicle Data Center with sensor information on temperature, speed, trajectory, and vibration. The remote measurement and transmission of systems data called telemetry is essential to ensuring the safe and successful launch of the Agency s space missions. When a launch is unsuccessful, as it was for this year s Orbiting Carbon Observatory satellite, telemetry data also provides valuable clues as to what went wrong and how to remedy any problems for future attempts. All of this information is streamed from sensors in the form of binary code: strings of ones and zeros. One small company has partnered with NASA to provide technology that renders raw telemetry data intelligible not only for Agency engineers, but also for those in the private sector.

Source record↗

NASA NTRS1968

Results of several experimental investigations of the static aerodynamic characteristics for the Apollo/Saturn 5 launch vehicle

Experimental static aerodynamic data for Apollo, Saturn 5 launch vehicle configurations

Walker, C. E.↗

NASA NTRS2001

Communication System Architecture for Planetary Exploration

Future human missions to Mars will require effective communications supporting exploration activities and scientific field data collection. Constraints on cost, size, weight and power consumption for all communications equipment make optimization of these systems very important. These information and communication systems connect people and systems together into coherent teams performing the difficult and hazardous tasks inherent in planetary exploration. The communication network supporting vehicle telemetry data, mission operations, and scientific collaboration must have excellent reliability, and flexibility.

Braham, Stephen P.↗

NASA NTRSDate not supplied

Simulating Secure Data Exchange and Storage for Urban Air Mobility Environments

In this paper I give some background on UAM, the need for security in UAM, as well as blockchain. Then I discuss how blockchain can facilitate a secure exchange and storage of data in a UAM environment, focusing on a simulation we developed to that simulates a UAM environment. Specifically, the simulation focuses on the negotiation between UAM operators, PSUs, and the DSS when two operators want to claim the same airspace. We discuss how this process, as well as the subsequent vehicle telemetry data, is captured in the blockchain.

UAM↗

NASA NTRS1983

High angle of attack inviscid flow calculations over a Shuttle-like vehicle with comparisons to flight data

Recent advances in computational techniques and computer hardware have made it possible to attack the problem of computing steady-state inviscid flowfields over complex three-dimensional bodies such as the Space Shuttle Orbiter. Certain problems have arisen in connection with cases involving high angles of attack. Weilmuenster et al. (1981, 1982) have, therefore, presented a time asymptotic computational method, HALIS, designed to handle the high angle-of-attack problem for the inviscid flow over the Space Shuttle vehicle. The code was modified to include all of the Shuttle vehicle forward of the wing root. Body surface pressures generated by the HALIS code were shown to be in excellent agreement with flight pressures measured on the Shuttle vehicle. In the present investigation, results from the HALIS code, which has been extended to cover the first 1212 inches of the Shuttle vehicle, are compared with flight surface pressures. Shock shapes at several angles of attack are also presented.

Weilmuenster, K. J.↗

NASA NTRS2013

Developing an Accurate CFD Based Gust Model for the Truss Braced Wing Aircraft

The increased flexibility of long endurance aircraft having high aspect ratio wings necessitates attention to gust response and perhaps the incorporation of gust load alleviation. The design of civil transport aircraft with a strut or truss-braced high aspect ratio wing furthermore requires gust response analysis in the transonic cruise range. This requirement motivates the use of high fidelity nonlinear computational fluid dynamics (CFD) for gust response analysis. This paper presents the development of a CFD based gust model for the truss braced wing aircraft. A sharp-edged gust provides the gust system identification. The result of the system identification is several thousand time steps of instantaneous pressure coefficients over the entire vehicle. This data is filtered and downsampled to provide the snapshot data set from which a reduced order model is developed. A stochastic singular value decomposition algorithm is used to obtain a proper orthogonal decomposition (POD). The POD model is combined with a convolution integral to predict the time varying pressure coefficient distribution due to a novel gust profile. Finally the unsteady surface pressure response of the truss braced wing vehicle to a one-minus-cosine gust, simulated using the reduced order model, is compared with the full CFD.

Bartels, Robert E.↗

NASA NTRS1985

The space shuttle ascent vehicle aerodynamic challenges configuration design and data base development

The phase B Space Shuttle systems definition studies resulted in a generic configuration consisting of a delta wing orbiter, and two solid rocket boosters (SRB) attached to an external fuel tank (ET). The initial challenge facing the aerodynamic community was aerodynamically optimizing, within limits, this configuration. As the Shuttle program developed and the sensitivities of the vehicle to aerodynamics were better understood the requirements of the aerodynamic data base grew. Adequately characterizing the vehicle to support the various design studies exploded the size of the data base to proportions that created a data modeling/management challenge for the aerodynamicist. The ascent aerodynamic data base originated primarily from wind tunnel test results. The complexity of the configuration rendered conventional analytic methods of little use. Initial wind tunnel tests provided results which included undesirable effects from model support tructure, inadequate element proximity, and inadequate plume simulation. The challenge to improve the quality of test results by determining the extent of these undesirable effects and subsequently develop testing techniques to eliminate them was imposed on the aerodynamic community. The challenges to the ascent aerodynamics community documented are unique due to the aerodynamic complexity of the Shuttle launch. Never before was such a complex vehicle aerodynamically characterized. The challenges were met with innovative engineering analyses/methodology development and wind tunnel testing techniques.

Dill, C. C.↗

NASA NTRS2001

Analysis of Measured and Predicted Acoustics from an XV-15 Flight Test

Flight acoustic and vehicle state data from an XV-15 acoustic flight test are examined. Flight predictions using TRAC are performed for a level flight (repeated) and four descent conditions (including a BVI). The assumptions and procedures used for TRAC flight predictions as well as the variability in flight measurements, which are used for input and comparison to predictions, are investigated in detail. Differences were found in the measured vehicle airspeed, altitude, glideslope, and vehicle orientation (yaw, pitch and roll angle) between each of the repeat runs. These differences violate some of the prediction assumptions and significantly impacted the resulting acoustic predictions. Multiple acoustic pulses, with a variable time between the pulses, were found in the measured acoustic time histories for the repeat runs. These differences could be attributed in part to the variability in vehicle orientation. Acoustic predictions that used the measured vehicle orientation for the repeat runs captured this multiple pulse variability. Thickness noise was found to be dominant on approach for all the cases, except the BVI condition. After the aircraft passed overhead, broadband noise and low frequency loading noise were dominant. The predicted LowSPL time histories compared well with measurement on approach to the array for the non-BVI conditions and poorly for the BVI condition. Accurate prediction of the lift share between the rotor and fuselage must be known in order to improve predictions. At a minimum, measurements of the rotor thrust and tip-path-plane angle are critical to further develop accurate flight acoustic prediction capabilities.

Boyd, D. Douglas, Jr.↗

NASA NTRS2023

Prediction of Noise-Power-Distance Data for Urban Air Mobility Vehicles

In contrast to most commercial air traffic today, vehicles serving the urban air mobility (UAM) market are anticipated to operate within communities and be close to the public at large. The approved model for assessing environmental impact of air traffic actions in the United States, the Federal Aviation Administration (FAA) Aviation Environmental Design Tool (AEDT), does not directly support analysis of such operations due to a combined lack of UAM aircraft flight performance model data and aircraft noise data. This paper addresses the latter by offering two prediction-based approaches for generation of noise-power-distance (NPD) data for use within AEDT. One utilizes the AEDT fixed-wing aircraft modeling approach and the other utilizes the AEDT rotary-wing aircraft modeling approach.

noise-power-distance↗

NASA NTRS1953

Preliminary Drag and Heat-transfer Data Obtained from Air-launched Cone-cylinder Test Vehicle over Mach Number Range from 1.5 to 5.18

An air-launched cone-cylinder test vehicle designed to obtain data at Mach numbers above 4.0 was rocket boosted from a release Mach number of 5.18. The vehicle was launched at an altitude of 35,000 feet and reached peak velocity of 5150 feet per second at 28,500 feet. The total-drag coefficient (based on maximum cross-sectional area) decreased gradually from 0.31 at a Mach number of 1.75 to 0.145 at a Mach number of 5.18, while the Reynold's number (based on body length) increased from 31 x 10 to the 6th power to 107 x 10 to the 6th power. The skin friction coefficients, in general, were slightly lower than Van Driest's theoretical values for similar wall-temperature conditions. Convective heat-transfer coefficients were obtained from a single skin-thermocouple measurement. The maximum wall temperature recorded was 1240 degrees r.

Messing, Wesley E↗

NASA NTRS2014

Conceptual Launch Vehicle and Spacecraft Design for Risk Assessment

One of the most challenging aspects of developing human space launch and exploration systems is minimizing and mitigating the many potential risk factors to ensure the safest possible design while also meeting the required cost, weight, and performance criteria. In order to accomplish this, effective risk analyses and trade studies are needed to identify key risk drivers, dependencies, and sensitivities as the design evolves. The Engineering Risk Assessment (ERA) team at NASA Ames Research Center (ARC) develops advanced risk analysis approaches, models, and tools to provide such meaningful risk and reliability data throughout vehicle development. The goal of the project presented in this memorandum is to design a generic launch 7 vehicle and spacecraft architecture that can be used to develop and demonstrate these new risk analysis techniques without relying on other proprietary or sensitive vehicle designs. To accomplish this, initial spacecraft and launch vehicle (LV) designs were established using historical sizing relationships for a mission delivering four crewmembers and equipment to the International Space Station (ISS). Mass-estimating relationships (MERs) were used to size the crew capsule and launch vehicle, and a combination of optimization techniques and iterative design processes were employed to determine a possible two-stage-to-orbit (TSTO) launch trajectory into a 350-kilometer orbit. Primary subsystems were also designed for the crewed capsule architecture, based on a 24-hour on-orbit mission with a 7-day contingency. Safety analysis was also performed to identify major risks to crew survivability and assess the system's overall reliability. These procedures and analyses validate that the architecture's basic design and performance are reasonable to be used for risk trade studies. While the vehicle designs presented are not intended to represent a viable architecture, they will provide a valuable initial platform for developing and demonstrating innovative risk assessment capabilities.

Launch Vehicle↗

NASA NTRSDate not supplied

Continued Environmental Microbiology Monitoring of The International Space Station (ISS) Veggie Unit Used for In-Flight, Crop-Based Food Systems

The International Space Station is a closed environment where rotating sets of Crewmembers live and work. This environment is monitored to ensure occupants’ health and safety during their spaceflight residency by routine Environmental Health System (EHS) collection of microbial samples including air, surface, and water. The microbial samples are collected, enumerated, and analyzed quarterly to monitor on-board system contamination and potential risks to crew health. Quarterly monitoring of the microorganisms in the ISS environment supports crew safety and contributes to a large set of microbial concentration and diversity data. The current in-inflight microbial requirements were developed using this historical data collected by the routine environmental monitoring. These in-flight microbial requirements have been established to maintain the health and safety of the spacecraft environment. This study leverages quarterly operational EHS sampling by collecting additional microbial samples from the surface of the Veggie plant production system on ISS. These samples will yield microbial concentration and diversity that can be compared and analyzed with nominal surface samples from the vehicle. The data collected in this study will aid in the development of requirements for spaceflight-based food production systems. Continued surface sampling of the internal and external surfaces of the Veggie system, along with collaboration from both Johnson Space Center (JSC) & Kennedy Space Center (KSC) scientists studying the microbiome of the veggie-crop systems, will be implemented as part of the future development of crop-based food system requirements for the ISS and beyond.

Christian Mena↗

NASA NTRS2001

Analysis of Measured and Predicted Acoustics From an XV-15 Flight Test

Flight acoustic and vehicle state data from an XV-15 acoustic flight test are examined. Flight predictions using TiltRotor Aeroacoustic Code (TRAC) are performed for a level flight (repeated) and four descent conditions (including a blade vortex interaction (BVI)). The assumptions and procedures used for TRAC flight predictions as well as the variability in flight measurements, which are used for input and comparison to predictions, are investigated in detail. Differences were found in the measured vehicle airspeed, altitude, glideslope, and vehicle orientation (yaw, pitch, and roll angle) between each of the repeat runs. These differences violate some of the prediction assumptions and significantly impacted the resulting acoustic predictions. Multiple acoustic pulses, with a variable time between the pulses, were found in the measured acoustic time histories for the repeat runs. These differences could be attributed in part to the variability in vehicle orientation. Acoustic predictions that used the measured vehicle orientation for the repeat runs captured this multiple pulse variability. Thickness noise was found to be dominant on approach for all the cases, except the BVI condition. After the aircraft passed overhead, broadband noise and low frequency loading noise were dominant. The predicted LowSPL time histories compared well with measurement on approach to the array for the non-BVI conditions and poorly for the BVI condition. Accurate prediction of the lift share between the rotor and fuselage must be known in order to improve predictions. At a minimum, measurements of the rotor thrust and tip-path-plane angle are critical to further develop accurate flight acoustic prediction capabilities.

Boyd, D. Douglas, Jr.↗