Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “turbulence modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

On the validation of a code and a turbulence model appropriate to circulation control airfoils

A computer code for calculating flow about a circulation control airfoil within a wind tunnel test section has been developed. This code is being validated for eventual use as an aid to design such airfoils. The concept of code validation being used is explained. The initial stages of the process have been accomplished. The present code has been applied to a low-subsonic, 2-D flow about a circulation control airfoil for which extensive data exist. Two basic turbulence models and variants thereof have been successfully introduced into the algorithm, the Baldwin-Lomax algebraic and the Jones-Launder two-equation models of turbulence. The variants include adding a history of the jet development for the algebraic model and adding streamwise curvature effects for both models. Numerical difficulties and difficulties in the validation process are discussed. Turbulence model and code improvements to proceed with the validation process are also discussed.

Viegas, J. R.↗
DOE OSTI2025

Investigation of Main Bearing Fatigue Estimate Sensitivity to Synthetic Turbulence Models Using a Novel Drivetrain Model Implemented in OpenFAST

ABSTRACT A coupled medium‐fidelity drivetrain model is developed and implemented in OpenFAST for a 10‐MW land‐based reference turbine. The implementation is verified against a fully coupled multibody wind turbine model, including a detailed drivetrain. The new model can simultaneously and accurately estimate main bearing loads and represent elastic bending of the drivetrain. It has low computational cost and is useful for early design phases, sensitivity analyses and complex systems like wind farms (where computational expense must be expended elsewhere). Here, the model is implemented for a monopile offshore wind turbine and used to investigate the sensitivity of main bearing basic rating life to different synthetic turbulence models. Large‐eddy simulations (LES) targeting stable, neutral, and unstable atmospheric conditions at below‐, near‐ and above‐rated wind speeds are used as a reference. The turbulence models recommended by the International Electrotechnical Commission, the Mann spectral tensor model, and the Kaimal spectral model with exponential coherence are fitted to the LES data. Additionally, a constrained turbulence generator, PyConTurb (short for Python Constrained Turbulence ), based on LES data, is applied in the aero‐hydro‐servo‐elastic simulations. Taking PyConTurb as the baseline, the Kaimal model significantly underestimates fatigue of the downwind main bearing, with between 10% and 40% less damage. The Mann model also underestimates the downwind main bearing fatigue by up to 30%. The upwind main bearing damage is driven by mean loads, and differences between models are less significant, although the trends are similar. Reasons for these discrepancies are investigated and attributed to differences in spatial and temporal variations among the turbulence models.

17 WIND ENERGY↗
NASA NTRSDate not supplied

Heated Supersonic Axisymmetric Jet Cases for the NASA Turbulence Modeling Resource

This paper will describe three new supersonic jet cases for the NASA Turbulence Modeling Resource (TMR). These cases were taken from the 6th AIAA Propulsion Aerodynamics Workshop (PAW) nozzle test problem, which utilized data taken at NASA GRC consisting of non-intrusive measurements of jet plume velocities and temperatures, including both mean values and turbulence statistics. The three jet cases all used a Mach 1.63 axisymmetric nozzle: A heated jet for each at on-design conditions, a temperature-matched on-design condition at Mach 1.63, and an off-design heated condition for the Mach 1.63 nozzle. Computational fluid dynamics (CFD) solutions are obtained using three established Reynolds-averaged Navier-Stokes (RANS) codes: Wind-US, FUN3D, and Vulcan, all using the Menter Shear Stress Transport (SST) k-ω turbulence model. The NASA TMR requires at least two CFD codes yielding essentially identical results to certify that the approaches are verified, that is - providing solutions that may not necessarily provide close comparisons with experimental data, but solve the posed CFD equations as intended.

nozzle↗
NASA NTRS1993

Evaluation of Baldwin-Barth turbulence model with thin-layer Navier-Stokes computation of an axisymmetric afterbody-exhaust jet flowfield

Axisymmetric steady flowfield over a steep circular arc afterbody with a choked exhaust jet in a subsonic freestream is numerically investigated using overflow code, developed by NASA Ames. The accuracy of Baldwin-Barth one-equation turbulence model for the computation of separated flow and plume shear layers is assessed by a comparison of predictions with available measurements from NASA Langley. The results show that the Baldwin-Barth turbulence model performs better than the Baldwin-Lomax algebraic model in predicting the surface pressure distribution in the separated flow region of the afterbody. In the jet mixing layer, the Baldwin-Barth model considerably unpredicts the growth of the shear layer, as does the Baldwin-Lomax model. It is shown that the one-equation turbulence model needs improvement for the prediction of separated flow due to smooth adverse pressure gradient, and mixing layer growth.

Kandula, M.↗
NASA NTRS1998

Flow and Turbulence Modeling and Computation of Shock Buffet Onset for Conventional and Supercritical Airfoils

Flow and turbulence models applied to the problem of shock buffet onset are studied. The accuracy of the interactive boundary layer and the thin-layer Navier-Stokes equations solved with recent upwind techniques using similar transport field equation turbulence models is assessed for standard steady test cases, including conditions having significant shock separation. The two methods are found to compare well in the shock buffet onset region of a supercritical airfoil that involves strong trailing-edge separation. A computational analysis using the interactive-boundary layer has revealed a Reynolds scaling effect in the shock buffet onset of the supercritical airfoil, which compares well with experiment. The methods are next applied to a conventional airfoil. Steady shock-separated computations of the conventional airfoil with the two methods compare well with experiment. Although the interactive boundary layer computations in the shock buffet region compare well with experiment for the conventional airfoil, the thin-layer Navier-Stokes computations do not. These findings are discussed in connection with possible mechanisms important in the onset of shock buffet and the constraints imposed by current numerical modeling techniques.

Bartels, Robert E.↗
NASA NTRS1993

Implementation of the Baldwin-Barth turbulence model into the ZETA code and its diagnosis

The Baldwin-Barth turbulence model was implemented into Zeta, a time-accurate, zonal, integro-differential code for incompressible laminar and turbulent flows. The implementation procedure is patterned after the model subroutine in ARC2D. The results of ZETA with the Baldwin-Barth turbulence model were compared with experimental data, with ZETA using Baldwin-Lomax model, and with ARC2D using the Baldwin-Barth model. The Baldwin-Barth model subroutine was tested by inputting an ARC2D velocity solution of an NACA-0012 airfoil at R(sub e) = 3.9 x 10(exp 6) and alpha = 5 deg. The resultant turbulent viscosity and Reynolds stresses compared favorably with the original data. For the same grid having grid points inside the laminar sublayer, which is necessary due to the one-equation nature of the model, ZETA however predicts early separation. It was found that the current ZETA has problem with such a fine grid. Further work is in progress to solve this problem.

Low, Scott L.↗
NASA NTRS1990

An assessment and application of turbulence models for hypersonic flows

The current approach to the Accurate Computation of Complex high-speed flows is to solve the Reynolds averaged Navier-Stokes equations using finite difference methods. An integral part of this approach consists of development and applications of mathematical turbulence models which are necessary in predicting the aerothermodynamic loads on the vehicle and the performance of the propulsion plant. Computations of several high speed turbulent flows using various turbulence models are described and the models are evaluated by comparing computations with the results of experimental measurements. The cases investigated include flows over insulated and cooled flat plates with Mach numbers ranging from 2 to 8 and wall temperature ratios ranging from 0.2 to 1.0. The turbulence models investigated include zero-equation, two-equation, and Reynolds-stress transport models.

Coakley, T. J.↗
NASA NTRS1979

Effects of turbulence model selection on the prediction of complex aerodynamic flows

Numerical simulations of viscous transonic flow over a circular-arc airfoil and in a diffuser are described. The simulations are made with a new computer program designed to serve as a tool in the development of improved turbulence models for complex flows. The program incorporates zero-, one-, and two-equation eddy viscosity models and includes a variety of subsonic and supersonic boundary conditions. The airfoil flow contains a shock-separated boundary-layer interaction that has resisted previous attempts at simulation. The diffuser flow also contains a shock-boundary-layer interaction, which has not been simulated previously. Calculations using standard turbulence models, developed originally for incompressible unseparated flows, are described. Results indicate that although there are interesting differences in predictions between the various models, none of them predict the flows accurately. Suggestions for improved turbulence models are discussed.

Coakley, T. J.↗
DOE OSTI2021

Self-similar Reynolds-averaged mechanical–scalar turbulence models for Rayleigh–Taylor, Richtmyer–Meshkov, and Kelvin–Helmholtz instability-induced mixing in the small Atwood number limit

Analytical self-similar solutions to two-, three-, and four-equation Reynolds-averaged mechanical–scalar turbulence models describing incompressible turbulent Rayleigh–Taylor, Richtmyer–Meshkov, and Kelvin–Helmholtz instability-induced mixing in planar geometry are derived in the small Atwood number (Boussinesq) limit. The models are based on the turbulent kinetic energy K and its dissipation rate ε, together with the scalar (heavy-fluid mass fraction) variance S and its dissipation rate Χ modeled either differentially or algebraically. The models allow for a simultaneous description of mechanical and scalar mixing, i.e., mixing layer growth and molecular mixing, respectively. Mixing layer growth parameters and other physical observables relevant to each instability are obtained explicitly as functions of the model coefficients. The turbulent fields are also expressed in terms of the model coefficients, with their temporal power-law scalings obtained by requiring that the self-similar equations are explicitly time-independent. The model calibration methodology is described and discussed. Expressions for a subset of the various physical observables are used to calibrate each of the two-, three-, and four-equation models, such that the self-similar solutions are consistent with experimental and numerical simulation data corresponding to these values of the observables and to specific canonical Rayleigh–Taylor, Richtmyer–Meshkov, and Kelvin–Helmholtz turbulent flows. A calibrated four-equation model is then used to reconstruct the mean and turbulent fields, and late-time turbulent equation budgets for each instability-induced flow across the mixing layer. The reference solutions derived here can provide systematic calibrations and better understanding of mechanical–scalar turbulence models and their predictions for instability-induced turbulent mixing in the very large Reynolds number limit.

42 ENGINEERING↗
NASA NTRSDate not supplied

A Wall-Distance Method for Turbulence Modeling

The distance from a grid point to the closest wall surface, wall distance, is a funda- mental quantity in turbulence modeling. Efficiency of wall-distance calculations has become more critical as the size of computational grids has significantly increased in recent years. This paper reports on an initial implementation of a new search-based wall-distance method that is suitable for general unstructured computational fluid dynamics (CFD) grids and tailored for requirements specific for turbulence modeling. The method represents a two-step approach to calculate the wall distance. In the first step, the wall distance is approximated for each grid point as the minimum distance from this point to a vertex of a triangular face at the wall. The point-to-vertex distance calculation is relatively inexpensive but may lead to a significant error in the wall-distance ap- proximation, especially for grid points near the wall. In the second step, for grid points located within a predefined distance ( threshold ) from the wall, the wall distance is computed as the minimum distance to wall faces. As a result, the wall distance is exact for all grid points within the threshold. This two-step approach reduces the computational cost yet achieves high and controllable accuracy in the evaluation of the wall distance. Algorithmic enhancements are presented to improve efficiency of wall-distance computations. Comprehensive assessment of the new method is reported for large-scale unstructured CFD grids generated for the Fifth AIAA CFD High-Lift Prediction Workshop. The performance of the new wall-distance method compares favorably with performance of two established methods implemented in high-performance CFD codes.

Wall Distance↗
NASA NTRS1994

Potential capabilities of Reynolds stress turbulence model in the COMMIX-RSM code

A Reynolds stress turbulence model has been implemented in the COMMIX code, together with transport equations describing turbulent heat fluxes, variance of temperature fluctuations, and dissipation of turbulence kinetic energy. The model has been verified partially by simulating homogeneous turbulent shear flow, and stable and unstable stratified shear flows with strong buoyancy-suppressing or enhancing turbulence. This article outlines the model, explains the verifications performed thus far, and discusses potential applications of the COMMIX-RSM code in several domains, including, but not limited to, analysis of thermal striping in engineering systems, simulation of turbulence in combustors, and predictions of bubbly and particulate flows.

Chang, F. C.↗
NASA NTRS1994

Validation of two-equation turbulence models for propulsion flowfields

The objective of the study is to assess the capability of two-equation turbulence models for simulating propulsion-related flowfields. The standard kappa-epsilon model with Chien's low Reynolds number formulation for near-wall effects is used as the baseline turbulence model. Several experimental test cases, representative of rocket combustor internal flowfields, are used to catalog the performance of the baseline model. Specific flowfields considered here include recirculating flow behind a backstep, mixing between coaxial jets and planar shear layers. Since turbulence solutions are notoriously dependent on grid and numerical methodology, the effects of grid refinement and artificial dissipation on numerical accuracy are studied. In the latter instance, computational results obtained with several central-differenced and upwind-based formulations are compared. Based on these results, improved turbulence modes such as enhanced kappa-epsilon models as well as other two-equation formulations (e.g., kappa-omega) are being studied. In addition, validation of swirling and reacting flowfields are also currently underway.

Deshpande, Manish↗
NASA NTRS1990

A non-isotropic multiple-scale turbulence model

A newly developed non-isotropic multiple scale turbulence model (MS/ASM) is described for complex flow calculations. This model focuses on the direct modeling of Reynolds stresses and utilizes split-spectrum concepts for modeling multiple scale effects in turbulence. Validation studies on free shear flows, rotating flows and recirculating flows show that the current model perform significantly better than the single scale k-epsilon model. The present model is relatively inexpensive in terms of CPU time which makes it suitable for broad engineering flow applications.

Chen, C. P.↗
NASA NTRSDate not supplied

Novel Turbulence Model Tailored for Complex Rocket Motor Exhaust Jets

This paper describes a new RANS turbulence model intended to give improved accuracy in turbulence that is affected by compressibility, rotation and curvature, and variable density, making it well-suited to complex rocket motor exhaust jets. Four key elements of the model are: the use of simple-averaged (not mass-averaged) turbulence decomposition; a second-order Taylor series for the equilibrated turbulent fluxes; empirical modeling that accounts for the combined effects of aforementioned turbulence modifiers; and model tuning on large-eddy simulation data for mixing layers for a wide range of these turbulence modifiers. The model is implemented as an extension of the k-w SST model. Results include comparisons to detached eddy simulation results for hot and cold co-flowing exhaust jets, and to experimental data for supersonic retropropulsion on the CobraMRV Mars-lander concept vehicle. The model is named TMRC for its constituents elements, the Taylor series with Mach number, rotation and curvature effects.

turbulence modeling↗
NASA NTRS1990

Application of a Reynolds stress turbulence model to the compressible shear layer

Theoretically based turbulence models have had success in predicting many features of incompressible, free shear layers. However, attempts to extend these models to the high-speed, compressible shear layer have been less effective. In the present work, the compressible shear layer was studied with a second-order turbulence closure, which initially used only variable density extensions of incompressible models for the Reynolds stress transport equation and the dissipation rate transport equation. The quasi-incompressible closure was unsuccessful; the predicted effect of the convective Mach number on the shear layer growth rate was significantly smaller than that observed in experiments. Having thus confirmed that compressibility effects have to be explicitly considered, a new model for the compressible dissipation was introduced into the closure. This model is based on a low Mach number, asymptotic analysis of the Navier-Stokes equations, and on direct numerical simulation of compressible, isotropic turbulence. The use of the new model for the compressible dissipation led to good agreement of the computed growth rates with the experimental data. Both the computations and the experiments indicate a dramatic reduction in the growth rate when the convective Mach number is increased. Experimental data on the normalized maximum turbulence intensities and shear stress also show a reduction with increasing Mach number.

Sarkar, S.↗
NASA NTRS1990

Application of a Reynolds stress turbulence model to the compressible shear layer

Theoretically based turbulence models have had success in predicting many features of incompressible, free shear layers. However, attempts to extend these models to the high-speed, compressible shear layer have been less effective. In the present work, the compressible shear layer was studied with a second-order turbulence closure, which initially used only variable density extensions of incompressible models for the Reynolds stress transport equation and the dissipation rate transport equation. The quasi-incompressible closure was unsuccessful; the predicted effect of the convective Mach number on the shear layer growth rate was significantly smaller than that observed in experiments. Having thus confirmed that compressibility effects have to be explicitly considered, a new model for the compressible dissipation was introduced into the closure. This model is based on a low Mach number, asymptotic analysis of the Navier-Stokes equations, and on direct numerical simulation of compressible, isotropic turbulence. The use of the new model for the compressible dissipation led to good agreement of the computed growth rates with the experimental data. Both the computations and the experiments indicate a dramatic reduction in the growth rate when the convective Mach number is increased. Experimental data on the normalized maximum turbulence intensities and shear stress also show a reduction with increasing Mach number.

Sarkar, S.↗
NASA NTRS2013

Assessments of a Turbulence Model Based on Menter's Modification to Rotta's Two-Equation Model

The main objective of this paper is to construct a turbulence model with a more reliable second equation simulating length scale. In the present paper, we assess the length scale equation based on Menter s modification to Rotta s two-equation model. Rotta shows that a reliable second equation can be formed in an exact transport equation from the turbulent length scale L and kinetic energy. Rotta s equation is well suited for a term-by-term modeling and shows some interesting features compared to other approaches. The most important difference is that the formulation leads to a natural inclusion of higher order velocity derivatives into the source terms of the scale equation, which has the potential to enhance the capability of Reynolds-averaged Navier-Stokes (RANS) to simulate unsteady flows. The model is implemented in the PAB3D solver with complete formulation, usage methodology, and validation examples to demonstrate its capabilities. The detailed studies include grid convergence. Near-wall and shear flows cases are documented and compared with experimental and Large Eddy Simulation (LES) data. The results from this formulation are as good or better than the well-known SST turbulence model and much better than k-epsilon results. Overall, the study provides useful insights into the model capability in predicting attached and separated flows.

Abdol-Hamid, Khaled S.↗
NASA NTRS1995

Industry-Wide Workshop on Computational Turbulence Modeling

This publication contains the presentations made at the Industry-Wide Workshop on Computational Turbulence Modeling which took place on October 6-7, 1994. The purpose of the workshop was to initiate the transfer of technology developed at Lewis Research Center to industry and to discuss the current status and the future needs of turbulence models in industrial CFD.

Shabbir, Aamir↗