Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “thrust”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Inverse Load Calculation of Wind Turbine Support Structures - A Numerical Verification Using the Comprehensive Simulation Code FAST: Preprint (Revised)

Physically measuring the dynamic responses of wind turbine support structures enables the calculation of the applied loads using an inverse procedure. In this process, inverse means deriving the inputs/forces from the outputs/responses. This paper presents results of a numerical verification of such an inverse load calculation. For this verification, the comprehensive simulation code FAST is used. FAST accounts for the coupled dynamics of wind inflow, aerodynamics, elasticity and turbine controls. Simulations are run using a 5-MW onshore wind turbine model with a tubular tower. Both the applied loads due to the instantaneous wind field and the resulting system responses are known from the simulations. Using the system responses as inputs to the inverse calculation, the applied loads arecalculated, which in this case are the rotor thrust forces. These forces are compared to the rotor thrust forces known from the FAST simulations. The results of these comparisons are presented to assess the accuracy of the inverse calculation. To study the influences of turbine controls, load cases in normal operation between cut-in and rated wind speed, near rated wind speed and between ratedand cut-out wind speed are chosen. The presented study shows that the inverse load calculation is capable of computing very good estimates of the rotor thrust. The accuracy of the inverse calculation does not depend on the control activity of the wind turbine.

17 WIND ENERGY↗

Direct Fusion Drive for a Human Mars Orbital Mission

The Direct Fusion Drive (DFD) is a nuclear fusion engine that produces both thrust and electric power. It employs a field reversed configuration with an odd-parity rotating magnetic field heating system to heat the plasma to fusion temperatures. The engine uses deuterium and helium-3 as fuel and additional deuterium that is heated in the scrape-off layer for thrust augmentation. In this way variable exhaust velocity and thrust is obtained.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Towing Tank and Flume Testing of Passively Adaptive Composite Tidal Turbine Blades: Preprint

Composite tidal turbine blades with bend-twist (BT) coupled layups allow the blade to self-adapt to local site conditions by passively twisting. Passive feathering has the potential to increase annual energy production and shed thrust loads and power under extreme tidal flows. Decreased hydrodynamic thrust and power during extreme conditions meann that the turbine support structure, generator, and other components can be sized more appropriately, resulting in a higher utilization factor and increased cost effectiveness. This paper presents new experimental data for a small-scale turbine with BT composite blades. The research team tested the turbine in the Kelvin Hydrodynamics Laboratory towing tank at the University of Strathclyde in Glasgow, United Kingdom, and in the recirculating current flume at the l Institut Francais de Recherche pour l Exploitation de la Mer Centre in Boulogne-sur-Mer, France. Tests were also performed on rigid aluminum blades with identical geometry, which yielded baseline test sets for comparison. The results from both facilities agreed closely, supporting the hypothesis that increased blade flexibility can induce load reductions. Under the most extreme conditions tested the turbine with BT blades had up to 11 percent lower peak thrust loads and a 15 percent reduction in peak power compared to the turbine with rigid blades. The load reductions varied as a function of turbine rotational velocity and ambient flow velocity.

17 WIND ENERGY↗

Performance evaluation of half-wetted hydrodynamic bearings with DLC coated surfaces.

In conventional liquid lubrication it is assumed that surfaces are fully wetted and no slip occurs between the fluid and the solid boundary. Under the 'no slip' condition the maximum shear gradient occurs at the fluid-surface interface. When one or both surfaces are non-wetted by the fluid, boundary slip can occur due to weak bonding between the fluid and the solid surface, which reduces shear stresses in the fluid adjacent to the non-wetted surface. A thrust bearing tribometer was used to compare the performance of 'no slip' hydrodynamic thrust bearings with bearings surfaces that were made to slip at the interface between the surface and fluid. Hydrophobic surfaces on both runner and bearing were achieved with the deposition of hydrogenated diamond like carbon (H-DLC) films, produced by plasma-enhanced CVD on titanium alloy surfaces. Hydrophilic surfaces were created through the surface modification of DLC. A mixtures of water and glycerol was used as the lubricant. The tests were conducted using different constant bearing gaps. The normal load and the torque or traction force between the rotating runner and hydrodynamic thrust bearing were measured with load cells. The experimental results confirmed that load support is still possible when surfaces are partially-wetted or nonwetted.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Portable Data-Parallel Surface Reconstruction on a Uniform Rectilinear Grid

With the increasing heterogeneity and on-node parallelism of high-performance computing hardware, a major challenge is to develop portable and efficient algorithms and software. In this work, we present our implementation of a portable code to perform surface reconstruction using NVIDIA's Thrust library. Surface reconstruction is a technique commonly used in volume tracking methods for simulations of multimaterial flow with interfaces. Here, we have designed a 3D mesh data structure that is easily mapped to the 1D vectors used by Thrust and at the same time is simple to use and uses familiar data structure terminology (such as cells, faces, vertices, and edges). With this new data structure in place, we have implemented a piecewise linear interface reconstruction algorithm in 3 dimensions that effectively exploits the symmetry present in a uniform rectilinear computational cell. Finally, we report performance results, which show that a single implementation of these algorithms can be compiled to multiple backends (specifically, multi-core CPUs, NVIDIA GPUs, and Intel Xeon Phi processors), making efficient use of the available parallelism on each. We also compare performance of our implementation to a legacy FORTRAN implementation in Message Passing Interface (MPI) and show performance parity on single and multi-core CPU and achieved good parallel speed-ups on GPU. In conclusion, our research demonstrates the advantage of performance portability of the underlying data-parallel programming model.

97 MATHEMATICS AND COMPUTING↗

A micro-scale cutting model for UD CFRP composites with thermo-mechanical coupling

Cutting a unidirectional carbon fiber-reinforced polymer (UD CFRP) structure is the basic unit for CFRP machining, which is a complex thermal-mechanically coupled process. To reveal the deformation mechanism and predict cutting force in UD CFRP micro cutting, a micro-scale fracture model for UD CFRP cutting with thermal-mechanical coupling is demonstrated in this paper, which captures the failure modes for fibers, matrix and the interface based on a micro-level RVE using a relatively simple damage based fracture method. The thermal-mechanical coupling model at the micro scale is developed on the basis of the plastic energy dissipation and frictional heating during cutting. Failure models for the fiber, matrix and interface region are applied depending on the material properties of each of these three phases. Numerical simulations based on the above model with different fiber orientations were performed to predict the deformation and forces of different components in UD CFRP. Cutting experiments with the same fiber orientations as considered in the simulations were carried out to validate the force and deformation results. The predicted force and deformation patterns match well with evidence from our experiments. In general, the cutting force is larger than the thrust force regardless of fiber orientation. The cutting force reaches a maximum as the fiber orientation approaches 90 , but thrust forces do not vary substantially across cases. When the fiber orientation is acute, the deformation of fibers is much smaller than when the cutting angle is obtuse. Surface roughness follows the same trend with cutting angle as fiber deformation.

42 ENGINEERING↗

Influences of yaw angle and turbulence intensity on the performance of a 20 kW in-stream hydrokinetic turbine

Herein three-dimensional transient CFD (Computational Fluid Dynamics) simulations are performed to study the hydrodynamic performance of an ocean current turbine with a 3.0 m diameter 3-bladed rotor. Simulations are based on the RANS (Reynolds Averaged Navier–Stokes) equations and the shear stress transport k-ω turbulent model is utilized. The influence of yaw angle and upstream TI (turbulence intensity) on the turbine performance is studied. The CFD method is first validated using existing experimental data and good agreement is obtained. The performance of the turbine, including power, thrust and wake characteristics are then studied at different TSR (tip speed ratios). The turbine obtains a maximum coefficient of power (C p ) of 0.4642 at TSR = 6 and the coefficient of thrust (C t ) increases over the entire evaluated TSR range to a value of 0.8788 at a TSR = 10. Simulations are also performed at four different yaw angles, 0°, 5°, 10° and 15° which show that both C p and C t decrease as yaw angle increases. Finally simulations of three different TIs, 3%, 6% and 9%, are performed and analyzed. Results show that TI minimally affects C p and C t for the considered TI range, but greatly influences the downstream wake structure.

13 HYDRO ENERGY↗

Climatic controls on erosional efficiency vary with lithology across the Himalaya

Although climate can strongly influence erosional efficiency (i.e., erosion rate for a given topography), demonstrating its impact in tectonically active areas has been challenging due to other confounding controlling factors, such as lithology. Here, we show that 10 Be-derived erosion rates and efficiencies in the Himalayan orogen exhibit distinct relationships with climatic factors depending on lithology. We compile 173 10 Be-derived, basin-averaged erosion rates across the orogen, including 12 newly measured rates from the Dibang and Lohit valleys in the easternmost Himalaya, regions characterized by high precipitation magnitudes and variability. We group basins based on lithologies separated by orogen-scale thrust faults and quantify erosional efficiency coefficients based on the relationships between erosion rates and topographic metrics. Our results show that erosion rates and erosional efficiency from sedimentary and metasedimentary rocks along the Himalayan range front display a positive, nonlinear correlation with climatic factors, such as the number of extreme rainfall events and mean annual precipitation rates. In contrast, erosion rates from crystalline lithologies in the hanging wall of the Main Central thrust show a strong correlation with fluvial topography, whereas erosional efficiency shows no statistically significant correlation with climatic factors. Rapid erosion rates and high erosional efficiencies in the eastern Himalayan range front are likely driven by extreme precipitation on tectonically active, steep slopes composed of mechanically weak metasedimentary rocks. Our findings highlight the importance of the interplay between controlling factors, which include tectonics, lithology, and climate, that drive surface erosion and influence the topographic evolution of orogenic systems.

Channel steepness↗

Freestream turbulence effects on unsteady wind turbine loads and wakes: An IDDES study

We investigate numerically the effects of freestream turbulence on the unsteady aerodynamics and wakes of the National Renewable Energy Laboratory Phase VI wind turbine rotor for increasing wind speed. Turbulence is modeled using the Improved Delayed Detached-Eddy Simulation (IDDES) method. As a first step, a detailed mesh resolution study is conducted with the decaying freestream turbulence model at turbulence intensity of 0.5%. Our blade-resolved IDDES simulations show that grid-independent average torque and thrust results can be achieved with relatively coarse meshes, whereas dramatically higher mesh resolution is required for grid-independent results for power spectral densities of thrust force, especially in the deep-stall regime. Comparing the loads with the Shear-Stress Transport model demonstrates the superiority of IDDES in predicting massively separated flows. The aerodynamic performance and wake predictions with the decaying freestream turbulence model are compared with the synthetic freestream turbulence model. Both models predict nearly the same loads, spectral energy content, and wake characteristics. The properties of both the near- and far-wake regions are then examined. Furthermore, we show that separated boundary layers accelerate turbulent mixing and entrainment of the external flow, which results in faster wake recovery. The effect of increasing turbulence intensity to 6% is investigated using the synthetic freestream turbulence model. In contrast with the fully attached boundary layer, higher freestream turbulence in deep stall does not significantly affect the loads and vortex-shedding characteristics. However, the turbulent mixing in the wake is enhanced, which further hastens the recovery of the self-similar velocity profile. In general, increasing the wind speed at high turbulence intensity shifts the recovery farther upstream and increases the wake width.

17 WIND ENERGY↗

Transverse Λ polarization in e + e - collisions

In this paper we study transverse polarization of hyperons in single-inclusive leptonic annihilation. We show that when the transverse momentum of the baryon is measured with respect to the thrust axis, a transverse momentum dependent (TMD) factorization formalism is required and the polarization is generated by the TMD polarizing fragmentation function (TMD PFF), D 1 T ⊥ . However, when the transverse momentum of the baryon is measured with respect to the momentum of the initial leptons, a collinear twist-3 formalism is required and the polarization is generated by the intrinsic collinear twist-3 fragmentation function D T . Thus while these measurements differ from one another only by a change in the measurement axis, they probe different distribution functions. Recently, Belle measured a significant polarization in single-inclusive baryon production as a function of the transverse momentum with respect to the thrust axis. However, this data can in principle be re-analyzed to measure the polarization as a function of the transverse momentum of the baryon with respect to the lepton pair. This observable could be the first significant probe of the function, D T . In this paper, we first develop a TMD formalism for polarization; we then present a recent twist-3 formalism that was established to describe polarization. Using the TMD formalism, we demonstrate that the polarization at OPAL and Belle can be described using the twist-2 TMD factorization formalism. Finally, we make a theoretical prediction for this polarization in the collinear twist-3 formalism at Belle.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Preliminary conceptual design of fast neutron spectrum nuclear thermal rocket cores using monolithic uranium nitride fuel

This paper presents a few nuclear thermal rocket (NTR) reactor core preliminary conceptual designs based on the use of monolithic uranium nitride (UN) fuel plates or pins clad with tungsten (W), alloyed or unalloyed as needed. High-assay low-enriched uranium (HALEU) as well as high-enriched uranium (HEU) are considered. Nominal core thermal powers are between 300 and 1100 MW corresponding to thrusts between 66 kN and 240 kN. The estimated thrust-to-reactor-weight ratios (T/WRx) achievable with the HEU plate and pin configurations are between 3.8 and 10.9. The T/WRx achievable with the HALEU plate and pin configurations are lower, 1.9–4.0, than those achievable with HEU. It is noteworthy that even a relatively modest increase in fuel enrichment above the HALEU limit enables a significant increase in T/WRx. It must be emphasized that these results do not yet account for uncertainties and that the appropriateness of the assumed fuel thermal design limits for normal operation (i.e., peak centerline temperature of 3100 K) will need to be confirmed. Finally, just like for the other UN-based fuels currently considered for NTR applications (i.e., CERMET and CERCER), the proposed UN fuel systems need significant testing in prototypic conditions to confirm the appropriate performance for safe NTR applications. However, the monolithic fuel systems may have, overall, a higher technology readiness level (TRL), and, consequently, shorter fuel development and validation time may result.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

In-Situ Blade Strain Measurements and Fatigue Analysis of a Cross-Flow Turbine Operating in a Tidal Flow

Cross-flow turbines (CFTs) are inherently unsteady devices with regards to operating principle and loading. By improving our understanding of the dynamic loading on these turbines, we hope to better inform CFT design, improve survivability, and reduce overall costs. The University of New Hampshire (UNH) and the National Renewable Energy Laboratory (NREL) collaborated on a project to instrument and test a four-bladed New Energy Corp. vertical axis cross-flow turbine in a real tidal flow. One blade from the 3.2 m diameter x 1.7 m height turbine was instrumented with eight full-bridge strain gauges along the span of the blade. The turbine was then deployed at the UNH-Atlantic Marine Energy Center (AMEC) Tidal Energy Test Site in Portsmouth, NH. Time-synchronized measurements of blade strain, inflow, thrust, rotational speed, and electrical output were obtained to characterize blade loading under various conditions. The blade strain was examined to assess the dynamic loading and conduct a fatigue analysis on the device.

blade strain↗

Similarity of wake meandering for different wind turbine designs for different scales

The wake meandering characteristics of four different wind turbine designs with diameters ranging from a few centimetres (wind tunnel scale) to a hundred metres (utility scale) are investigated using large-eddy simulation with the turbine blades and nacelle parametrised using a new actuator surface model. Different velocity fields and meandering behaviours are observed at near-wake locations. At far-wake locations, on the other hand, the mean velocity deficit profiles begin to collapse when scaled by the centreline velocity deficit based on the incoming wind speed at turbine hub height, suggesting far-wake similarity across scales. The turbine-added turbulence kinetic energy profiles are shown to also nearly collapse with each other in the far wake when normalised using a velocity scale defined by the thrust on the turbine rotor. Moreover, we show that at far-wake locations, the simulated flow fields for all four turbine designs exhibit similar wake meandering characteristics in terms of (1) a Strouhal number independent of rotor designs of different sizes and (2) the distributions of wake meandering wavelengths and amplitudes when normalised by the rotor diameter and a length scale defined by the turbine thrust respectively.

Mechanics↗

Engineering Challenges in Antiproton Triggered Fusion Propulsion

During the last decade antiproton triggered fusion propulsion has been investigated as a method for achieving high specific impulse, high thrust in a nuclear pulse propulsion system. In general the antiprotons are injected into a pellet containing fusion fuel with a small amount of fissionable material (i.e., an amount less than the critical mass) where the products from the fission are then used to trigger a fusion reaction. Initial calculations and simulations indicate that if magnetically insulated inertial confinement fusion is used that the pellets should result in a specific impulse of between 100,000 and 300,000 seconds at high thrust. The engineering challenges associated with this propulsion system are significant. For example, the antiprotons must be precisely focused. The pellet must be designed to contain the fission and initial fusion products and this will require strong magnetic fields. The fusion fuel must be contained for a sufficiently long time to effectively release the fusion energy, and the payload must be shielded from the radiation, especially the excess neutrons emitted, in addition to many other particles. We will review the recent progress, possible engineering solutions and the potential performance of these systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Scale-model Experiment of Magnetoplasma Sail for Future Deep Space Missions

When Magnetic sail (MagSail) spacecraft is operated in space, the supersonic solar wind plasma flow is blocked by an artificially produced magnetic cavity to accelerate the spacecraft in the direction leaving the Sun. To evaluate the momentum transferring process from the solar wind to the coil onboard the MagSail spacecraft, we arranged a laboratory experiment of MagSail spacecraft. Based on scaling considerations, a solenoidal coil was immersed into the plasma flow from a magnetoplasmadynamic arcjet in a quasi-steady mode of about 1 ms duration. In this setup, it is confirmed that a magnetic cavity, which is similar to that of the geomagnetic field, was formed around the coil to produce thrust in the ion Larmor scale interaction. Also, the controllability of magnetic cavity size by a plasma jet from inside the coil of MagSail is demonstrated, although the thrust characteristic of the MagSail with plasma jet, which is so called plasma sail, is to be clarified in our next step.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Chameleon Solid Rocket Propulsion Model

The Khoury and Weltman (2004a and 2004b) Chameleon Model presents an addition to the gravitation force and was shown by the author (Robertson, 2009a and 2009b) to present a new means by which one can view other forces in the Universe. The Chameleon Model is basically a density-dependent model and while the idea is not new, this model is novel in that densities in the Universe to include the vacuum of space are viewed as scalar fields. Such an analogy gives the Chameleon scalar field, dark energy/dark matter like characteristics; fitting well within cosmological expansion theories. In respect to this forum, in this paper, it is shown how the Chameleon Model can be used to derive the thrust of a solid rocket motor. This presents a first step toward the development of new propulsion models using density variations verse mass ejection as the mechanism for thrust. Further, through the Chameleon Model connection, these new propulsion models can be tied to dark energy/dark matter toward new space propulsion systems utilizing the vacuum scalar field in a way understandable by engineers, the key toward the development of such systems. This paper provides corrections to the Chameleon rocket model in Robertson (2009b).

79 ASTRONOMY AND ASTROPHYSICS↗

Computational model of collisional-radiative nonequilibrium plasma in an air-driven type laser propulsion

A thrust power of a gas-driven laser-propulsion system is obtained through interaction with a propellant gas heated by a laser energy. Therefore, understanding the nonequilibrium nature of laser-produced plasma is essential for increasing available thrust force and for improving energy conversion efficiency from a laser to a propellant gas. In this work, a time-dependent collisional-radiative model for air plasma has been developed to study the effects of nonequilibrium atomic and molecular processes on population densities for an air-driven type laser propulsion. Many elementary processes are considered in the number density range of 10{sup 12}/cm{sup 3}<=N<=10{sup 19}/cm{sup 3} and the temperature range of 300 K<=T<=40,000 K. We then compute the unsteady nature of pulsively heated air plasma. When the ionization relaxation time is the same order as the time scale of a heating pulse, the effects of unsteady ionization are important for estimating air plasma states. From parametric computations, we determine the appropriate conditions for the collisional-radiative steady state, local thermodynamic equilibrium, and corona equilibrium models in that density and temperature range.

42 ENGINEERING↗

Experimental Investigation of Liquid-propellant Laser Propulsion with a Horizontal Momentum Measuring Lever

Thrust performance of Liquid-propellant laser propulsion (LLP) is seriously influenced by factors like laser parameters, choice of propellants and ablation materials. For the purpose of studying these influences, series of impulse measuring experiments for various propellants and ablation materials were conducted. The key device is a Horizontal Momentum Measuring Lever, which covers a C{sub m} measuring range from 10{sup 3} Ns/MJ to about 1.6x10{sup 4} Ns/MJ. A Nd:YAG laser was used as the laser source. From the result, it is found that laser energy density plays an important role on LLP efficiency, higher energy density leads to higher C{sub m} and I{sub sp}. Highest C{sub m} of about 10{sup 4} Ns/MJ with the I{sub sp} of 3.57s was achieved by focusing the laser to the average energy density of 8.83x10{sup 8} W/cm{sup 2}. Besides of that, it is also found that when the energy density is certainly high, C{sub m} of LLP increases stably with the increase of the propellant thickness, which gives a potential way to further improve the thrust performance in LLP.

42 ENGINEERING↗