Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “temperature dependence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Enhancement of Emission from Lanthanide Dopants in Perovskite Nanocrystals through a Temperature-Dependent Phase Transformation of the Perovskite Lattice

The excited states of lanthanide ions (Ln 3+ ) exhibit ultranarrow emission and long spin dephasing lifetimes suitable for optoelectronic and quantum applications but are not directly optically accessible. One effective strategy to excite Ln 3+ ions is to dope them into a semiconductor host lattice, which acts as a photosensitizer. This work describes enhancement of emission intensity by a factor of 19 with decreasing temperature (from 300 to S K) from Sm 3+ ions in CsPbCl 3 nanocrystal hosts. Structural characterization over the same temperature region reveals that this enhancement is primarily due to a symmetry-lowering cubic-to-orthorhombic phase transition of the host lattice, which reduces the local site symmetry of the dopant and increases the Sm 3+ * emission quantum yield.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Cobalt-Free Lithium and Manganese Rich Cathodes for Electric Vehicle Applications: Influence of Inherent Properties on Temperature-Dependent Performance

Lithium- and manganese-rich (LMR) oxides are attractive options as next-generation, earth-abundant cathodes. Despite inherent properties that result in less-than-ideal performance, advancements in this class of cathodes toward commercialization have been steady. Herein, we report a benchmark study on the influence these inherent properties exert on the discharge rate of Co-free, LMR//graphite (Gr) cells as a function of temperature. Because low-temperature performance is an essential consideration in the design of electric vehicle cells, understanding the limitations of current LMR systems is essential in understanding their current applicability as well as strategies for improvement. This work identifies two major limitations in the rate performance of LMR//Gr cells and suggests several areas of focus where practical strategies may provide improvements.

25 ENERGY STORAGE↗
DOE OSTI2024

Leveraging Temperature-Dependent (Electro)Chemical Kinetics for High-Throughput Flow Battery Characterization

The library of redox-active organics that are potential candidates for electrochemical energy storage in flow batteries is exceedingly vast, necessitating high-throughput characterization of molecular lifetimes. Demonstrated extremely stable chemistries require accurate yet rapid cell cycling tests, a demand often frustrated by time-denominated capacity fade mechanisms. We have developed a high-throughput setup for elevated temperature cycling of redox flow batteries, providing a new dimension in characterization parameter space to explore. We utilize it to evaluate capacity fade rates of aqueous redox-active organic molecules, as functions of temperature. We demonstrate Arrhenius-like behavior in the temporal capacity fade rates of multiple flow battery electrolytes, permitting extrapolation to lower operating temperatures. Collectively, these results highlight the importance of accelerated decomposition protocols to expedite the screening process of candidate molecules for long lifetime flow batteries.

25 ENERGY STORAGE↗
DOE OSTI2024

Spectral and Temperature-Dependent Optical Metrology: Towards More Robust, Effective and Durable Materials for Concentrated Solar Power

The primary objective of this project is to develop reliable and standardized spectroscopic measurement techniques to determine radiative properties, specifically the emittance and reflectance, of materials relevant for the next generation (Gen3) concentrated solar power (CSP) technologies. Experimental measurements will span near- and mid-infrared wavelengths (1–20 µm) with emphasis on quantifying the influences of: (1) operating temperatures of 25–1000 °C, (2) thermal cycling, and (3) environmental exposure of materials during operation (vacuum/air). A secondary goal is to develop open-access and digitized databases to host and share experimental data, together with standardized measurement protocols and operating procedures to determine optical properties of materials. This project will also include reasonable emphasis on developing predictive modeling tools to augment experimental data to extract more fundamental and material-specific radiative properties.

14 SOLAR ENERGY↗
DOE OSTI2021

Grain-resolved temperature-dependent anisotropy in hexagonal Ti-7Al revealed by synchrotron X-ray diffraction

Hexagonal metals have anisotropic coefficients of thermal expansion causing grain-level internal stresses during heating. High energy x-ray diffraction microscopy, a non-destructive, in situ, micromechanical and microstructural characterization technique, has been used to determine the anisotropic coefficients of thermal expansion (CTEs) for Ti-7Al. Two samples of polycrystalline α-phase Ti-7Al were continuously heated from room temperature to 850 °C while far-field HEDM scans were collected. The results showed a change in the ratio of the CTEs in the ‘a’ and ‘c’ directions which explains discrepancies found in the literature. The CTE additionally appears to be affected by the dissolution of α 2 precipitates. Analysis of the grain-resolved micromechanical data also shows reconfiguration of the grain scale stresses likely due to anisotropic expansion driving crystallographic slip.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Temperature-dependent microbial reactions by indigenous microbes in bentonite under Fe(III)- and sulfate-reducing conditions

Bentonite is a promising buffer material for constructing spent nuclear fuel (SNF) repositories. However, indigenous microbes in bentonite can be introduced to the repository and subsequent sealing of the repository develops anoxic conditions over time which may stimulate fermentation and anaerobic respiration, possibly affecting bentonite structure and SNF repository stability. Moreover, the microbial activity in the bentonite can be impacted by the heat generated from radionuclides decay. Therefore, to investigate the temperature effect on microbial activities in bentonite, we created microcosms with WRK bentonil (a commercial bentonite) using lactate as the electron donor, and sulfate and/or ferrihydrite (Fe(III)) as electron acceptors with incubation at 18 °C and 50 °C. Indigenous WRK microbes reduced sulfate and Fe(III) at both temperatures but with different rates and extents. Lactate was metabolized to acetate at both temperatures, but only to propionate at 18 °C during early-stage microbial fermentation. More Fe(III)-reduction at 18 °C but more sulfate-reduction at 50 °C was observed. Thermophilic and/or metabolically flexible microbes were involved in both fermentation and Fe(III)/ sulfate reduction. In conclusion, our findings illustrate the necessity of considering the influence of temperature on microbial activities when employing bentonite as an engineered buffer material in construction of SNF repository barriers.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

PMT-004 Validation Testing for Thermal Scattering Laws and Some Interesting Temperature-Dependent Implications [Slides]

This presentation finds that PMT-004 has four new benchmark cases highly sensitive to PE TSL (2 cases) and PMMA TSL (2 Cases). Additionally discovered was that the PE cases were well predicted using MCNP6.2 and ENDF/B-VIII.0. PMMA cases overpredicted by approximately 0.6-0.7% in k eff likely due to the lack of integral benchmarks sensitive to PMMA. The NCSU ENDF/B-VIII.1 PMMA TSL is an improvement over VIII.0. This was Accepted at last ICSBEP meeting pending comment resolution, should be published in 2024 version of the Handbook. It was found that temperature had a large impact on reactivity of the critical configuration. This has Implications for validation work for thermal cases- need to adjust TSL data to correct temperature as it can have hundreds of pcm effects for a few °C. Future thermal experiments should try and measure reactivity at multiple temperatures to add in data testing and benchmark adjustment.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Temperature-dependent solid electrolyte interphase reactions drive performance in lithium-mediated nitrogen reduction to ammonia

The solid electrolyte interphase (SEI) is a vital component to control mass transport and selectivity in the lithium-mediated reduction of N 2 to NH 3 (Li-N 2 R). Finding strategies that generate the optimal SEI, a complex network of organic and inorganic species, can potentially improve Li-N 2 R performance. Here, we unravel structure-property relationships of the SEI by correlating its composition with the NH 3 faradaic efficiency (FENH3). By modifying the reaction temperature, we alter electrolyte decomposition reactions and observe changes in the SEI that explain FE NH3 trends between electrolyte solvents. We quantify a complex reaction environment at elevated temperatures where SEI formation is counteracted by etching reactions. This tradeoff leads to temporal fluctuations of FE NH3 , but the maximal FE NH3 can reach up to 40%, the highest value reported for batch cells at ambient pressure, thus far. In conclusion, our work underscores the potential of novel electrolytes that steer SEI selectivity and, ultimately, improve Li-N 2 R performance.

electrocatalytic nitrogen reduction↗
DOE OSTI2021

Closures and Simulation for Thermal Radiation Transport in Stochastic Media with Nonlinear Temperature Dependence

Because of the practical challenge of rendering very complex realistic spatial structures for numerical work, it is common practice to resort to characterizing such media as stochastic mixtures of materials, ideally parametrized with low order statistics such as the mean, variance, and correlation functions of the now random material properties. This enables realizations of the medium to be repeatedly generated and radiation transport computations to, in principle, be performed for a large ensemble of these realizations to obtain a statistically well-characterized radiation field. Statistical post-processing yields desired quantities such as conditional and unconditional mean radiation flux and probability distributions of transmitted radiation. However, such computations prove expensive for all but the simplest stochastic geometries and are most suited for benchmarking approximate models. The most common approximations lead to homogenized media so that transport computations are required only on a single medium realization but by construct provide only limited statistical information on the radiation field. Almost all approximate approaches to this problem attempt to develop equations for low order moments of the radiation intensity (mean, second moment, correlation function) but inevitably encounter a closure problem: the equation for any statistical moment will contain terms depending on unknown higher-order moments. Thus, the challenge shifts to one of developing closure relations that relate the unknown moments to the lower order moments. Under very special conditions, an exact closure can be derived but in general closures are heuristically stated constitutive relations. Also, closure approaches depend on whether the mixing statistics are spatially and/or temporally continuous as in fluctuating turbulent fields, or discontinuous as in randomly mixed solid chunks of material. Thus, unconditional averaging is generally applied in the former case but conditional averaging is more appropriate when the mixing is discontinuous. In this work, the emphasis is on binary statistical mixtures of immiscible fluids as as such the quantities of interest are averages (flux, temperature) conditioned on the material type.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Experimental determination of the temperature-dependent Van Hove function in a Zr 80 Pt 20 liquid

Even though the viscosity is one of the most fundamental properties of liquids, the connection with the atomic structure of the liquid has proven elusive. By combining inelastic neutron scattering with the electrostatic levitation technique, the time-dependent pair-distribution function (i.e., the Van Hove function) has been determined for liquid Zr 80 Pt 20 . We show that the decay time of the first peak of the Van Hove function is directly related to the Maxwell relaxation time of the liquid, which is proportional to the shear viscosity. This result demonstrates that the local dynamics for increasing or decreasing the coordination number of local clusters by one determines the viscosity at high temperature, supporting earlier predictions from molecular dynamics simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Oxidation Temperature-Dependent Electrochemical Doping of WO 3 Deposited via Atomic Layer Deposition

Silicon-based photoelectrochemical devices show promise for the performance of light-driven CO 2 reduction but suffer from instability under photoelectrochemical conditions relevant to CO 2 reduction. Coating silicon electrodes with thin layers of metal oxides has shown promise to passivate unstable silicon surfaces, and many different metal oxides can be deposited on silicon using various techniques. In this study, we investigate the fundamental photoelectrochemical performance of WO 3 -coated silicon photoelectrodes, which were generated by oxidation of W-metal films deposited via atomic layer deposition on both degenerately doped (nSi + ) and low-doped (pSi) silicon. Two different oxidation temperatures were investigated (400 and 600 °C), and it was found that the monoclinic phase of WO 3 predominates at both temperatures but that more grain boundaries are present in the 600 °C film. From X-ray photoelectron spectroscopy, the stoichiometry of both films was found to be 1:3 W:O, and low electron energy loss experiments indicate band gaps of 3.0 and 3.1 eV for 400 and 600 °C films, respectively. Cyclic voltammetry experiments showed that the electron transfer kinetics increased after continued redox cycling, particularly for the material produced at 400 °C. X-ray photoelectron spectra suggest that the observed increase in electrode conductivity is due to the formation of oxygen vacancies in the film. Electrochemical impedance spectroscopy indicated that charge transport through the films was impacted by the grain boundaries that formed during oxidation of the film. Photoelectrochemical studies on pSi/WO 3 electrodes were highly variable, only producing a photocurrent and photovoltage with some samples. Our best sample, formed at 400 °C, produced a photovoltage of 180 mV, which is lower than what has previously been reported for WO 3 -coated silicon (500 mV). We hypothesize that the variability in photoelectrochemical experiments arose from a roughened WSiO x interface that is generated during film preparation. WO 3 shows promise as a metal oxide coating for silicon, but our results suggest that formation of a high-quality interface between Si and WO 3 is vital for best performance.

Charge transfer↗
DOE OSTI2023

Temperature-Dependent Sheet and Contact Resistivity Measurements on Ag and Ag-Ni Circuit Pastes

The metal circuits and brazes used in electronic, energy conversion, and/or energy storage devices often have difficulty wetting and adhering to ceramic and/or ceramic-passivated metal substrates. Here, a novel Particle Interlayer Directed Wetting and Spreading (PIDWAS) technique is demonstrated that utilizes screen printing, the low wetting angle of silver on nickel, and the high work of adhesion between nickel and various ceramics to produce well-adhered, self-assembled silver patterns on ceramic and/or stainless-steel substrates not normally wet by silver. The resulting Ag-Ni circuits have higher sapphire adhesion strengths (up to 30 MPa on sapphire), higher densities (>97% on sapphire), and similar high-temperature electronic resistivities to those made using commercially-available Heraeus C8710 or DAD-87 silver circuit pastes. Similarly, Ag-Ni brazes between a variety of ceramic and/or stainless-steel substrates have better microstructural stability with rapid thermal cycling, reduction-oxidation cycling, and dual atmosphere isothermal aging than conventional Ag-CuO brazes. In addition, the residual Ni in these Ag-Ni circuits and brazes can be used to chemically getter surface segregated Al, ensuring low contact resistances on a variety of chromia- and/or alumina-passivated stainless steels. Reference: [1] Hu G, Zhou Q, Bhatlawande A, Park J, Termuhlen R, Ma Y, Bieler TR, Yu HC, Qi Y, Hogan T & Nicholas JD. Patterned Nickel Interlayers for Enhanced Silver Wetting, Spreading and Adhesion on Ceramic Substrates. Scripta Materialia, 2021; 196, 113767. 10.1016/j.scriptamat.2021.113767 [2] Park J, Phongpreecha T, Nicholas JD & Qi Y. Enhanced Liquid Metal Wetting on Oxide Surfaces via Patterned Particles. Acta Materialia, 2020; 199, 551-560. 10.1016/j.actamat.2020.08.037

Bhatlawande, Aishwarya↗
DOE OSTI2020

Temperature-dependent anisotropic magnetoresistance and spin-torque-driven vortex dynamics in a single microdisk

Spin-orbit-torque-driven dynamics have recently gained interest in the field of magnetism due to the reduced requirement of current densities and an increase in efficiency, as well as the ease of implementation of different devices and materials. From a practical point of view, the low-frequency dynamics below 1GHz is particularly interesting since dynamics associated with magnetic domains lie in this frequency range. While spin-torque excitation of high-frequency modes has been extensively studied, the intermediate low-frequency dynamics have received less attention, although spin torques could potentially be used for both manipulation of the spin texture and the excitation of dynamics. In this paper, we demonstrate that it is possible to drive magnetic vortex dynamics in a single microdisk by spin-Hall torque at varying temperatures and relate the results to transport properties. We find that the gyrotropic mode of the core couples to the low-frequency microwave signal and produces a measurable voltage. The dynamic measurements are in agreement with magnetic transport measurements and are supported by micromagnetic simulations. Our results open the door for integrating magnetic vortex devices in spintronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Universal temperature dependence of the London penetration depth in κ - ( ET ) 2 X superconductors

High-precision radio-frequency magnetic susceptibility measurements were performed on single crystals of fully deuterated $κ-(ET)_2Cu[N(CN)_2]\,Br$, hereafter designated as $κ-(ET)_2Cu[N(CN)_2]\,Br$. This material phase separates into superconducting and antiferromagnetic regions, the degree of which depends strongly upon the cooling rate. Here, we show that the screening fraction $η_{sc}$ varies logarithmically with the cooling rate over nearly five decades. The average size of superconducting regions is estimated to vary from 5 to $40μm$, depending upon cooling rate, consistent with previous infrared microscopy measurements. In the region $T≲T_c/3$, the effective magnetic penetration depth exhibits power-law behavior $λ(T)-λ(0)~T^n$ with $n=1.6$, independent of the cooling rate. Changes in cooling rate and the consequent phase separation evidently do not introduce the kind of disorder that would alter the exponent $n$ in a $d$-wave superconductor. The exponent remains close to $n=$ 1.5, reported in single crystals of $κ-(ET)_2Cu[N(CN)_2]\,Br$ and $κ-(ET)_2Cu(NCS)_2$ [A. Carrington et al., Phys. Rev. Lett 83, 4172 (1999)]. The transition temperature fell linearly with $1-η_{sc}$. Measurements were also made on $κ-(ET)_2Cu[N(CN)_2]\,Cl$ of normal isotopic abundance in which a very small amount of superconducting phase $η_{sc}≈10^{-4}$ developed, presumably through the strain-induced sample mounting. This material showed a power-law exponent of $n=1.64$, independent of the cooling rate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Temperature dependence of uranium and thorium partitioning in igneous zircons

Zircon is a key mineral in geochronology because of its chemical and physical durability and tendency to incorporate radioactive trace elements such as U and Th. Quantifying the partitioning of the actinide elements is critical to constrain initial non-secular equilibrium amounts of 230 Th in zircon. An excess or deficit of 206 Pb will be produced from such an initial excess/deficit of 230 Th from the secular equilibrium condition, which influences the calculated 206 Pb/ 238 U age (Schärer, 1984, Mattinson, 1973). However, there is no standard way to calculate Th/U partitioning ratios when applying age corrections to young igneous zircon, making uncertainties hard to estimate. To better understand U and Th partitioning of zircon/melt that is the cornerstone of the secular disequilibrium correction, zircon was synthesized in one-atmosphere experiments using basaltic andesite, andesite, and rhyolite starting materials, doped with Zr, U, and Th. Different experimental temperatures and oxygen fugacity conditions (ΔQFM−4 to ΔQFM+4) were explored to examine their effects on U and Th partitioning. In addition, we specifically quantify the effects of sector zoning, fractional crystallization, and melt composition on U and Th partitioning. By combining experimental and natural zircon data, we find that temperature has the primary control on the partitioning of U and Th in the zircon and calibrate an inverse relationship between these partition coefficients and crystallization temperatures. The calibrated equation can be applied to the 230 Th correction for an improvement in the accuracy of Th-corrected 206 Pb/ 238 U dates when the zircon crystallization temperature is known.

206Pb/238U dating↗
DOE OSTI2021

Visualizing temperature-dependent phase stability in high entropy alloys

High entropy alloys (HEAs) contain near equimolar amounts of five or more elements and are a compelling space for materials design. In the design of HEAs, great emphasis is placed on identifying thermodynamic conditions for single-phase and multi-phase stability regions, but this process is hindered by the difficulty of navigating stability relationships in high-component spaces. Traditional phase diagrams use barycentric coordinates to represent composition axes, which require ( N – 1) spatial dimensions to represent an N -component system, meaning that HEA systems with N > 4 components cannot be readily visualized. Here, we propose forgoing barycentric composition axes in favor of two energy axes: a formation-energy axis and a ‘reaction energy’ axis. These Inverse Hull Webs offer an information-dense 2D representation that successfully captures complex phase stability relationships in N ≥ 5 component systems. We use our proposed diagrams to visualize the transition of HEA solid-solutions from high-temperature stability to metastability upon quenching, and identify important thermodynamic features that are correlated with the persistence or decomposition of metastable HEAs.

Chemistry↗
DOE OSTI2025

Temperature-Dependent Structural Transition in Cu-Intercalated Trigonal CuYbSe 2

Rare-earth delafossites, ARCh 2 ; A = alkali metal, R = rare-earth, Ch = chalcogen which consist of intercalated rare-earth metal dichalcogenides, host frustrated triangular lattices that are fertile ground for exotic phenomena. In most cases, the triangular rare-earth sublattice arises from R-3m (No. 166) structures with three layers of rare-earth metal dichalcogenide octahedra or P6 3 /mmc (No. 194) structures with two such layers, analogous to those found in transition metal dichalcogenides. Substituting the alkali metal with Cu + yields a distinct trigonal crystal symmetry P-3m1 (No. 164) in these structures. This symmetry change alters the coordination environment from ASe 6 octahedra in R-3m AYbSe 2 to CuSe 4 tetrahedra in CuYbSe 2 , resulting in shortened rare-earth to rare-earth separations and significantly reduced interlayer distances. Using X-ray single-crystal diffraction, powder neutron diffraction, resistance, and specific heat measurements, a structural transition slightly below room temperature (258 K) is observed. The low-temperature structure is a lower-symmetry I2/m structure, accompanied by partial Cu-site vacancy ordering. The combination of Cu disorder and the triangular lattice geometry in CuYbSe 2 provides a promising platform for investigating frustrated magnetism and unconventional transport phenomena.

Chemical structure↗