Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface states”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Improving Numerical Weather Predictions of Summertime Precipitation Over the Southeastern U.S. Through a High-Resolution Initialization of the Surface State

It is hypothesized that high-resolution, accurate representations of surface properties such as soil moisture and sea surface temperature are necessary to improve simulations of summertime pulse-type convective precipitation in high resolution models. This paper presents model verification results of a case study period from June-August 2008 over the Southeastern U.S. using the Weather Research and Forecasting numerical weather prediction model. Experimental simulations initialized with high-resolution land surface fields from the NASA Land Information System (LIS) and sea surface temperature (SST) derived from the Moderate Resolution Imaging Spectroradiometer (MODIS) are compared to a set of control simulations initialized with interpolated fields from the National Centers for Environmental Prediction 12-km North American Mesoscale model. The LIS land surface and MODIS SSTs provide a more detailed surface initialization at a resolution comparable to the 4-km model grid spacing. Soil moisture from the LIS spin-up run is shown to respond better to the extreme rainfall of Tropical Storm Fay in August 2008 over the Florida peninsula. The LIS has slightly lower errors and higher anomaly correlations in the top soil layer, but exhibits a stronger dry bias in the root zone. The model sensitivity to the alternative surface initial conditions is examined for a sample case, showing that the LIS/MODIS data substantially impact surface and boundary layer properties.

Case, Jonathan L.↗

Photoinduced reduction of surface states in Fe:ZnO

We report on the electronic structure of nano-crystalline Fe:ZnO, which has recently been found to be an efficient photocatalyst. Using resonant photoemission spectroscopy, we determine the binding energy of Fe 3d states corresponding to different valencies and coordination of the Fe atoms. The photo-activity of ZnO reduces Fe from 3+ to 2+ in the surface region of the nano-crystalline material due to the formation of oxygen vacancies. Electronic states corresponding to low-spin Fe{sup 2+} are observed and attributed to crystal field modification at the surface. These states are potentially important for the photocatalytic sensitivity to visible light due to their location deep in the ZnO bandgap. X-ray absorption and x-ray photoemission spectroscopy suggest that Fe is only homogeneously distributed for concentrations up to 3%. Increased concentrations does not result in a higher concentration of Fe ions in the surface region. This is limiting the photocatalytic functionality of ZnO, where the most efficient Fe doping concentration has been shown to be 1%-4%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct Measurement of Helicoid Surface States in RhSi Using Nonlinear Optics

Despite the fundamental nature of the edge state in topological physics, direct measurement of electronic and optical properties of the Fermi arcs of topological semimetals has posed a significant experimental challenge, as their response is often overwhelmed by the metallic bulk. However, laser-driven currents carried by surface and bulk states can propagate in different directions in nonsymmorphic crystals, allowing for the two components to be easily separated. Motivated by a recent theoretical prediction G. Chang et al., Phys. Rev. Lett. 124, 166404 (2020), we have measured the linear and circular photogalvanic effect currents deriving from the Fermi arcs of the nonsymmorphic, chiral Weyl semimetal RhSi over the 0.45-1.1 eV incident photon energy range. Our data are in good agreement with the predicted spectral shape of the circular photogalvanic effect as a function of photon energy, although the direction of the surface photocurrent departed from the theoretical expectation over the energy range studied. In conclusion, surface currents arising from the linear photogalvanic effect were observed as well, with the unexpected result that only two of the six allowed tensor element were required to describe the measurements, suggesting an approximate emergent mirror symmetry inconsistent with the space group of the crystal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Silica Surface States and their Wetting Characteristics

The wetting characteristics of silica (SiO 2 ) surfaces can be described by molecular dynamics (MD) and ab initio simulations, including comparison of silica surfaces (talc (001), siloxanated quartz, tridymite (001) and quartz (001)), some of which have not been considered previously in the literature. Classic MD and ab initio simulation methods have been used to determine the contact angle, interfacial water structure, hydroxylation reaction and hydration energy, the results of which are compared with experimental results reported in the literature. Additionally, wetting of silica surfaces depends on surface polarity and extent of hydroxylation. The non-polar siloxane surfaces are characterized by a contact angle of about 80°, an MD ‘water exclusion zone’ of about 3 Å, a relaxed interfacial water orientation, inertness to hydroxylation and minimal hydration energy. The polar silica surfaces can be wetted by water and have a more ordered interfacial water structure. Silanol groups form at the polar silica surface during hydroxylation reactions, and the calculated hydration energy of -1·2 and -1·6 eV matches the experimental heat of immersion measurements reported in the literature, which correspond to hydrogen (H) bonding with interfacial water. In conclusion, fundamental understanding of silica surfaces is important for understanding flotation phenomena and fluid flow in silica nanopores.

36 MATERIALS SCIENCE↗

Minimal model for spoof acoustoelastic surface states

Similar to textured perfect electric conductors for electromagnetic waves sustaining artificial or spoof surface plasmons we present an equivalent phenomena for the case of sound. Aided by a minimal model that is able to capture the complex wave interaction of elastic cavity modes and airborne sound radiation in perfect rigid panels, we construct designer acoustoelastic surface waves that are entirely controlled by the geometrical environment. Comparisons to results obtained by full-wave simulations confirm the feasibility of the model and we demonstrate illustrative examples such as resonant transmissions and waveguiding to show a few examples of many where spoof elastic surface waves are useful.

36 MATERIALS SCIENCE↗

Valence transition and termination-dependent surface states in the topological Kondo semimetal YbPtBi

Here, the Yb-terminated and Bi-terminated (111) surface electronic structure of topological Kondo semimetal YbPtBi is investigated using both density-functional-theory (DFT) -based calculations and angle-resolved photoemission spectroscopy (ARPES). The cleavage plane is found to be between Yb-layers and Bi-layers in both experiment and theory, and the broken inversion symmetry ensures the Yb-terminated surface does not mix with the Bi-terminated surface. The ARPES results at the Bi-terminated surface are similar to those reported for YPtBi or LuPtBi, and they can be well explained using DFT calculations assuming trivalent Yb atoms. In contrast, at the Yb-terminated surface, a trivalent to divalent transition and reduced hybridization with conduction electrons for the topmost Yb atoms are observed, as a result of reduced bonding with Bi-atoms. In addition, the Fermi arc features induced by the triply degenerate-points, which are missing at the Bi-terminated surface, can be identified at the Yb-terminated surface. Our study demonstrates unambiguously the reconstruction of surface electronic structure due to the valence transition of the lanthanide element in a Kondo lattice system.

36 MATERIALS SCIENCE↗

Pinning of energy transitions of defects, complexes, and surface states in AlGaN alloys

In this work, we determine the dependence of the defect transition energies, electronic bands, and surface charge neutrality levels in AlGaN. With Vacuum level as reference, we show that energy transitions of localized defects and the surface Fermi level are independent of the alloy composition as electronic bands diverge with the increase in the bandgap as a function of alloy composition. The invariance of localized states on the alloy composition creates a convenient internal reference energy with respect to which other energy states may be measured. We demonstrate a higher generality to the universality rule with the independence of deep transition states of otherwise shallow donor type defects [(+1/+3) transition for VN] and defect complexes (C N +Si III ) in addition to the earlier predicted independent nature of mid-gap states when they are either the antibonding state between cationic impurities and host anion or acceptors at anion sites.

36 MATERIALS SCIENCE↗

Effect of gamma-ray irradiation on the surface states of MOS tunnel junctions

Gamma-ray irradiation with doses up to 8 megarad produces no significant change on either the C(V) or the G(V) characteristics of MOS tunnel junctions with intermediate oxide thicknesses (40-60 A), whereas the expected flat-band shift toward negative electrode voltages occurs in control thick oxide capacitors. A simple tunneling model would explain the results if the radiation-generated hole traps are assumed to lie below the valence band of the silicon. The experiments also suggest that the observed radiation-generated interface states in conventional MOS devices are not due to the radiation damage of the silicon surface.

Ma, T. P.↗

STM imaging of electronic waves on the surface of Bi2Te3: topologically protected surface states and hexagonal warping effects

Scanning tunneling spectroscopy studies on high-quality Bi{sub 2}Te{sub 3} crystals exhibit perfect correspondence to ARPES data, hence enabling identification of different regimes measured in the local density of states (LDOS). Oscillations of LDOS near a step are analyzed. Within the main part of the surface band oscillations are strongly damped, supporting the hypothesis of topological protec- tion. At higher energies, as the surface band becomes concave, oscillations appear which disperse with a particular wave-vector that may result from an unconventional hexagonal warping term.

36 MATERIALS SCIENCE↗

Pairing around a single Dirac point: A unifying view of Kohn-Luttinger superconductivity in Chern bands, quarter metals, and topological surface states

Superconductivity of a single two-dimensional Dirac fermion offers a natural route to topological superconductivity. While usually considered extrinsic—arising from proximity to a conventional superconductor—we investigate when a doped Dirac cone can develop superconductivity from a short-range repulsive interaction 𝑈 via the Kohn–Luttinger mechanism. We show that an ideal, linear Dirac cone is immune to pairing at leading order in 𝑈 2 . Superconductivity instead emerges only through higher-order in 𝑘 corrections to the dispersion, which are unavoidable in any lattice realization and crucially dictate the pairing symmetry. The form of the pairing thus reflects how the well-known obstruction to realizing a single Dirac cone on a lattice is circumvented. When a Dirac cone arises from broken time-reversal symmetry—for instance, at a transition between Chern insulators or in a valley-polarized phase—we find a topological 𝑝−𝑖⁢𝑝 state whose chirality is opposite to that of the parent chiral metal above 𝑇 𝑐 . By contrast, for a surface Dirac cone of a 3D topological insulator, superconductivity is stabilized by anisotropies in the dispersion. For 𝐶 3⁢𝑣 -symmetric warping, as in , pairing is strongest when the Fermi surface becomes hexagonal, leading to order in the (𝑑±𝑖⁢𝑑)×(𝑝+𝑖⁢𝑝) channel with accidental near-nodes. In the highly anisotropic limit 𝑣 𝑥 ≫𝑣 𝑦 , relevant to side surfaces of layered materials, the Fermi surface splits into two branches, and nesting favors a pairing symmetry 𝛥∼s⁢g⁡n⁢(𝑘 𝑥 )⁢cos⁡(𝑘 𝑦 ) reminiscent of organic superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Metallic surface states in a correlated d-electron topological Kondo insulator candidate FeSb 2

The resistance of a conventional insulator diverges as temperature approaches zero. The peculiar low-temperature resistivity saturation in the 4f Kondo insulator (KI) SmB 6 has spurred proposals of a correlation-driven topological Kondo insulator (TKI) with exotic ground states. However, the scarcity of model TKI material families leaves difficulties in disentangling key ingredients from irrelevant details. Here we use angle-resolved photoemission spectroscopy (ARPES) to study FeSb 2 , a correlated d-electron KI candidate that also exhibits a low-temperature resistivity saturation. On the (010) surface, we find a rich assemblage of metallic states with two-dimensional dispersion. Measurements of the bulk band structure reveal band renormalization, a large temperature-dependent band shift, and flat spectral features along certain high-symmetry directions, providing spectroscopic evidence for strong correlations. Our observations suggest that exotic insulating states resembling those in SmB 6 and YbB 12 may also exist in systems with d instead of f electrons.

36 MATERIALS SCIENCE↗

Pair wave function symmetry in UTe2 from zero-energy surface state visualization

Although nodal spin-triplet topological superconductivity appears probable in uranium ditelluride (UTe 2 ), its superconductive order parameter Δ k remains unestablished. In theory, a distinctive identifier would be the existence of a superconductive topological surface band, which could facilitate zero-energy Andreev tunneling to an s-wave superconductor and also distinguish a chiral from a nonchiral Δ k through enhanced s-wave proximity. In this study, we used s-wave superconductive scan tips and detected intense zero-energy Andreev conductance at the UTe 2 (0-11) termination surface. Imaging revealed subgap quasiparticle scattering interference signatures with a-axis orientation. The observed zero-energy Andreev peak splitting with enhanced s-wave proximity signifies that Δ k of UTe 2 is a nonchiral state: B 1u , B 2u , or B 3u . However, if the quasiparticle scattering along the a axis is internodal, then a nonchiral B 3u state is the most consistent for UTe 2 .

Gu, Qiangqiang [Cornell Univ., Ithaca, NY (United ↗

XPS study of surface state of novel perovskite system Dy{sub 0.5}Sr{sub 0.5}Co{sub 0.8}Fe{sub 0.2}O{sub 3-δ} as cathode for solid oxide fuel cells

In the present attempt,novel perovskite oxide Dy{sub 0.5}Sr{sub 0.5}Co{sub 0.8}Fe{sub 0.2}O{sub 3–δ} (DSCF) as cathode material has been synthesized by an Ethylene glycol-citrate combined sol-gel combustion route. Orthorhombic symmetry structure is confirmed by X-ray diffraction (XRD) and data is well fitted using Rietveld refinement by Full-Prof software suite. Chemical natureof surface of DSCF has been analyzed by using X-ray photoelectron spectroscopy (XPS). XPS result shows that Dy ions are in +3 oxidation state and Sr in +2 states. However Co2p and Fe2p spectra indicates partial change in oxidation state from Co3+/Fe3+ to Co4+/Fe4+. These attribute to develop active sites on the surface for oxygen ions. O1s XPS spectra shows two oxygen peaks relatedto lattice oxygen in perovskite and absorbed oxygen in oxygen vacancy are detected. O1s spectra demonstrate the existence of adsorbed oxygen species on the surface of DSCF oxide which is quite beneficial for intermediate temperature of Solid Oxide Fuel Cell.

36 MATERIALS SCIENCE↗

Conductive surface states and Kondo exhaustion in insulating YbIr 3 Si 7

The interplay of Kondo screening and magnetic ordering in strongly correlated materials containing local moments is a subtle problem. Usually the number of conduction electrons per unit cell matches or exceeds the number of moments, and a Kondo-screened heavy Fermi liquid develops at low temperatures. Changing the pressure, magnetic field, or chemical doping can displace this heavy Fermi liquid in favor of a magnetically ordered state. Alternatively, Kondo singlet formation can be suppressed when the number of conduction electrons is small compared to the number of magnetic moments, known as the Kondo exhaustion scenario. Furthermore we report the discovery of such an “exhausted” Kondo lattice material, YbIr 3 Si 7 , where the bulk electrical conductivity tends to zero in the antiferromagnetic state below the Néel temperature T N = 4.1 K, as all the free carriers are consumed in the formation of Kondo singlets. By contrast, the surface is conducting, as the Yb 3+ ions relax into larger nonmagnetic Yb 2+ in the presence of reduced chemical pressure, which shifts the chemical potential.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗