Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structure function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Density power spectrum in the local interstellar medium

Observational evidence is presented for the existence of interstellar medium electron density irregularities over a wide range of scale sizes. Radio scattering observations associated with the wavenumber range of about 10 to the -11th to 10 to the -6th/m are consistent with a density spectrum of the wavenumber form -3.7 + or - 0.6. At lower spatial wavenumbers (10 to the -16th to 10 to the -18th/m) the power spectrum can be estimated by (1) computation of the density fluctuations near the outer scale of the spectrum, (2) comparison with density irregularities predicted by theoretical models of the interstellar medium, and (3) comparison with observations of the velocity structure function.

Armstrong, J. W.↗

Moisture analysis from radiosonde and microwave spectrometer data

A method for analysis of the horizontal and vertical distributions of the moisture field utilizing satellite, upper air and surface data is proposed in this paper. A brief overview of the microwave sensors on board Nimbus 5 and 6 is also presented. A technique is provided utilizing the radiosonde data sets to calibrate the satellite field of total precipitable water. Next, the calibrated satellite-derived field is utilized along with ship and coastal reports of moisture, and a vertical structure function to generate vertical distribution of moisture and thus provide a mapping of specific humidity at several levels in the troposphere. Utilizing these procedures, analyses for several case studies were performed. The resultant maps show detailed distribution of specific humidity along with some interesting climatological features. A reasonable acceptance of the available aerological data sets by the analysis scheme is demonstrated.

Haydu, K. J.↗

Observations of tropospheric phase scintillations at 5 GHz on vertical paths

The article presents observations of turbulence-induced tropospheric phase fluctuations measured at 5 GHz on the near-vertical paths relevant to many astronomical and geophysical measurements. The data are summarized as phase power spectra, structure functions, and Allan variances. Comparisons to other microwave observations indicate relatively good agreement in both the level and shape of the power spectrum of these tropospheric phase fluctuations. Implications for precision Doppler tracking of spacecraft and geodesy/radio interferometry are discussed.

Armstrong, J. W.↗

Intercomparison of global SST fields derived from satellite sensors and ship observations

Near global comparisons were made between binned forms of SST obtained from different instruments, ship meteorological observations, and the output of a meteorological model. Binning hereinafter means gridding by simple summation of data values in a bin, which in this study was a 2 deg. x 2 deg. box or a 10 deg. x 10 box surrounding a grid node. In the binned comparisons, the question is asked: are the binned data from two instruments drawn from the same population? The first two measures of statistical moments of the populations are used to test the hypothesis that they are. Comparisons were also attempted between raw forms of the various SST retrievals, using a structure function analysis. The results of this analysis were relatively uninteresting and are therefore omitted.

Pazan, S. E.↗

Monovision techniques for telerobots

The primary task of the vision sensor in a telerobotic system is to provide information about the position of the system's effector relative to objects of interest in its environment. The subtasks required to perform the primary task include image segmentation, object recognition, and object location and orientation in some coordinate system. The accomplishment of the vision task requires the appropriate processing tools and the system methodology to effectively apply the tools to the subtasks. This paper describes the functional structure of the telerobotic vision system used in the Langley Research Center's (LaRC) Intelligent Systems Research Laboratory (ISRL) and discusses two monovision techniques for accomplishing the vision subtasks.

Goode, Plesent W.↗

Fine-scale motion in the central Orion nebula

The inner region of M42 has been mapped in the O III N1 forbidden line at an unprecedented combination of velocity and spatial resolution and photometric accuracy. Three separate velocity systems along the line of sight are identified. Differential mass flow is present in two of these systems. All three systems show random fluctuations in velocity well above their measurement errors. The point-by-point velocities are used to determine the diagnostic statistical parameter, the structure function. The random motions show correlation with spatial separation, as expected for turbulence; but comparison with the predictions of classical theory for nebular turbulence shows poor agreement. If Kolmogorov (1941, 1942) theory applies, then the energy must be input at many scales.

Castaneda, Hector O.↗

Fine-scale motion in NGC 6514 and NGC 6523

Velocity maps of the inner regions of the bright H II regions NGC 6514 and NGC 6523 were made with unprecedented spatial and spectral resolution in the 5007 A line of forbidden O III. In addition to the advantages of an instrumental full width at half-maximum intensity of only 5.4 km/s, the small thermal width of the heavy oxygen ion also allows determination of accurate line widths and velocities. The CCD spectra were numerically fitted to Gaussian line profiles and revealed two separate velocity systems in NGC 6523. The data sets of radial velocities were used to derive the dependence of the most probable turbulent velocities upon the sample sizes, and the spatial dependence of the structure function. These relationships are the basic functions for comparison with the predictions of the models for turbulence in H II regions.

O'Dell, C. R.↗

The velocity structure and turbulence at the center of the Orion Nebula

Using the Coude Feed System of the Kitt Peak National Observatory at its highest possible dispersion and a CCD detector with wide dynamic range it was possible to examine in detail the radial and turbulent velocities of the Orion Nebula at the seeing limit. For the first time, multiple components of the spectral lines were resolved and the Gaussian profiles fit to them. Using four different observing runs, two circular areas 2 minutes in diameter were observed, the first centered on the theta sup 1 Orionis and the second centered on theta sup 2 Orionis. The velocity resolution of 1 km/s combined with the angular resolution of 2 seconds allowed observation in detail at line splitting as well as the location and measurement of high internal motions, about -50 km/s with respect to the bulk of ionized matter. Because over 900 different positions were measured, modern statistical techniques were used for the analysis of turbulence, so that the dispersion relation and the structure function could be calculated and compared with predictions of the Kolmogorov theory. The random motions showed correlation with spatial separation, as expected for turbulence; but comparison with predictions of the classical theory for nebular turbulence showed poor agreement. If Kolmogorov theory applies, then the energy must be input at many scales.

Castaneda, Hector O.↗

Reliability Model Generator for fault-tolerant systems

This paper discusses an analysis tool, the Reliability Model Generator, that reasons from structural and functional system design specifications to generate a reliability model for the system under investigation. The resultant model defines a system state space sufficient to characterize the effects of single and multiple component failures. This model may then be examined by the analyst or used as input to an existing reliability evaluation tool, the Semi-Markov Unreliability Range Evaluator (SURE), to compute numeric bounds for system reliability (i.e., safety, mission success, availability, etc.). In defining the input to the Reliability Model Generator, a separation of the component function from structural specification is proposed to allow easy modification for analysis of alternative architectures. A hierarchical system description paradigm promotes multiple abstractions, thereby enabling analysis at all phases of the design process. The work described in this paper has been supported under NASA contract NAS1-10899, Integrated Airframe/Propulsion Control System Architecture (IAPSA II). IAPSA II promotes a system engineering methodology and supporting analytical tools to evaluate flight control architecture configuration alternatives during early phases of the design cycle when the cost and schedule impact of design revisions is minimal. Emphasis is placed on traceability to ensure that the requirements drive the resulting design.

Catherine M McCann↗

Monovision techniques for telerobots

The primary task of the vision sensor in a telerobotic system is to provide information about the position of the system's effector relative to objects of interest in its environment. The subtasks required to perform the primary task include image segmentation, object recognition, and object location and orientation in some coordinate system. The accomplishment of the vision task requires the appropriate processing tools and the system methodology to effectively apply the tools to the subtasks. The functional structure of the telerobotic vision system used in the Langley Research Center's Intelligent Systems Research Laboratory is discussed as well as two monovision techniques for accomplishing the vision subtasks.

Goode, P. W.↗

Turbulent small-scale neutral and ion density fluctuations as measured during MAC/Epsilon

During the MAC/Epsilon campaign (Fall 1987, from Andoya, Northern Norway, 69 N, 16 E) a total of four altitude profiles of neutral gas number densities and six profiles of ion number densities were measured with high spatial resolution in the height range from 60 to 120 km. First results of these rocket-borne experiments are presented with emphasis on small scale turbulent density variations and related turbulent parameter as structure function constants and energy dissipation rates.

Luebken, F.-J.↗

Fatigue analysis of mini-mast space truss

The functional, structural adequacy of a 20 meter long generic space truss (Mini-Mast), subjected to fatigue loading, was examined with respect to the failure modes which are most likely to occur during services. The space truss is made of thin-walled tubes having unidirectional, zero degree layups of Celanese G50 graphite fibers/Narmco 5217 epoxy composites. The approach used to investigate the most probable failure mode of the truss under fatigue loading is to determine the stress level, including the types of stress, in the member first, then followed by failure mode analysis based on the stress level just determined. To begin, an approximate beam-parameter truss (BPT) model is analyzed first, followed by a detailed analysis of the truss using a finite element model (FEM) run with NASTRAN code. The response results of the BPT model are used to compare FEM results and to check any major deviation of trend derived from the FEM. The purpose of the work was to search available fatigue data of the tube material, to conduct approximate dynamical stress analysis of the BPT model, to run detailed dynamical stress analysis of the FEM model using NASTRAN code, and to predict the fatigue life of the truss member based on limited fatigue data.

Hwang, Shoi Y.↗

Capturing design knowledge

A scheme is proposed to capture the design knowledge of a complex object including functional, structural, performance, and other constraints. Further, the proposed scheme is also capable of capturing the rationale behind the design of an object as a part of the overall design of the object. With this information, the design of an object can be treated as a case and stored with other designs in a case base. A person can then perform case-based reasoning by examining these designs. Methods of modifying object designs are also discussed. Finally, an overview of an approach to fault diagnosis using case-based reasoning is given.

Babin, Brian A.↗

Simulation of microwave brightness temperatures of an evolving hailstorm at SSM/I frequencies

A simulation of the appearance of an intense hailstorm in the passive microwave spectrum is used to characterize the vertical sources of radiation contributing to the microwave brightness temperatures at the top of the atmosphere. The four frequencies studied correspond to those used on the USAF Special Sensor Microwave Imager. The origin and movement of the radiation are described by two vertically resolved radiative structure functions. Consideration is given to problems relating to precipitation retrieval through passive remote sensing.

Mugnai, Alberto↗

Multifrequency observations of BL Lacertae

Optical, IR, and radio monitoring data covering 20 years are presented for BL Lac. Also, four simultaneous multifrequency spectra are given, covering the range 10 to the 9th - 10 to the 18th Hz. These spectra include ground-based observations and data from the Einstein, Exosat, IUE, and IRAS satellites. From the monitoring data, the character of emission variability is determined using structure functions. The multifrequency spectra are used to study the origin of X-ray emission and to determine the physical parameters of emitting regions. The data show that the emitting region is inhomogeneous, with a small inner region of high density and magnetic field that eventually becomes a large, partially opaque radio emitting region with a low density and magnetic fields. Also, the two simple predictions of the synchrotron self-Compton model are reproduced by the multifrequency spectra.

Bregman, Joel N.↗

Intermittent turbulence in the solar wind

This paper demonstrates the existence of intermittent turbulence in the solar wind at 8.5 AU. The pth-order velocity structure functions show scaling behavior in the range of periods from 0.85 hour to 13.6 hours for p of less than 20. The exponent of the scaling law s(p) is a quadratic function of p. These observations of s(p) for compressible MHD turbulence on a scale of the order of about 1 AU are consistent with laboratory measurements of s(p) for gasdynamic turbulence on a scale of the order of 1 m, indicating the universal character of intermittent turbulence. The observations are not described by the 'constant beta' model of intermittent turbulence. They are marginally consistent with the lognormal model. The observations are consistent with a random beta model prediction which assumes that the turbulence is a mixture of sheets and space-filling eddies.

Burlaga, L. F.↗

Simulations of sonic boom ray tube area fluctuations for propagation through atmospheric turbulence including caustics via a Monte Carlo method

A theory which gives statistical predictions for how often sonic booms propagating through the earth's turbulent boundary layer will encounter caustics, given the spectral properties of the atmospheric turbulence, is outlined. The theory is simple but approximately accounts for the variation of ray tube areas along ray paths. This theory predicts that the variation of ray tube areas is determined by the product of two similar area factors, psi (x) and phi (x), each satisfying a generic harmonic oscillator equation. If an area factor increases the peak acoustic pressure decreases, and if the factor decreases the peak acoustic pressure increases. Additionally, if an area factor decreases to zero and becomes negative, the ray has propagated through a caustic, which contributes a phase change of 90 degrees to the wave. Thus, it is clear that the number of times that a sonic boom wave passes through a caustic should be related to the distorted boom waveform received on the ground. Examples are given based on a characterization of atmospheric turbulence due to the structure function of Tatarski as modified by Crow.

Sparrow, Victor W.↗

High resolution atmospheric and surface variability from combined MAMS and VAS radiances

Measuring of the variation of atmospheric and surface quantities such as moisture and stability at small scales is an important step to monitoring, understanding and forecasting mesoscale processes. For instance, moisture and stability products from the geostationary platform VISSR Atmospheric Sounder (VAS) exhibit interesting detail at the meso B (20-200 km) level (Chesters et al., 1986; Smith et al., 1985). However, variations at the meso C scale (2-20 km) and at the lower end of the meso B scale (20-100 km) suffer from the effects of noise. Noise can be greatly reduced by using a high resolution data collection system. The Multispectral Atmospheric Mapping Sensor (MAMS), with its 100-m resolution over a 36km swath, is well suited to provide high resolution mesoscale information about the atmosphere and surface of the earth. A more complete depiction of the atmospheric state at the smaller scales is possible through the combination of the high horizontal resolution MAMS data with the vertical sounding data of the VAS. This paper demonstrates a procedure for combining MAMS and VAS data in a physical retrieval to produce high resolution derived products of precipitable water (PW), lifted index (LI), and skin temperature (TS). The variability of these products is evaluated in a structure function analysis similar to that of Hillger and Vonder Haar (1979). Results for 19 June 1986 from the Cooperative Hunstville Meteorological Experiment (COHMEX) are presented.

Moeller, Christopher C.↗