Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “steering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

A novel, steerable, low-energy proton source for detector characterization

We report on the conversion of the Manitoba II mass spectrometer into a versatile low-energy proton beam facility. This infrastructure is adaptable to any detector-under-test (DUT), and has proven itself effective with the characterization of silicon detectors used in subatomic beyond-the-Standard-Model (BSM) searches, namely the Nab experiment. A pencil beam of mono-energetic protons can be produced in a range from 25 keV to 35 keV, achieving a beam current of ~1 x 10 -18 A. Electrostatic steering plates were constructed to direct the Gaussian-profile proton beam over a 117 mm diameter area-of-interest with full-width at half-maxima (FWHM) ranging from 0.6 mm to 1.26 mm. This work discusses the modifications and subsequent tests to confirm the beam specifications met the demands of the aforementioned detectors.

Fundamental neutron physics↗
DOE OSTI2023

Aerodynamic characterization of two tandem wind turbines under yaw misalignment control using actuator line model

Yaw control has proven to be promising in alleviating the wake effects that plague the efficiency of wind farms. In this work, the actuator line modeling (ALM) method is adopted to simulate the flows over two tandem turbines distanced by 3–7 rotor diameters, with the yaw angle of the upstream rotor varying from γ 1 = 0° to 50°. The aim is to provide a comprehensive aerodynamic characterization of this simple wind farm under yaw misalignment control. With increasing yaw angle, the power generated by the downstream rotor increases, compensating the power loss in the upstream rotor, and resulting in significantly higher total power of the two turbines than that without yaw control. The maximum power output is achieved as the upstream wake of the yawed rotor is redirected away from the downstream rotor plane. Behind the downstream rotor, the secondary steering phenomenon is observed, where the wake is also redirected from the centerline. The use of the actuator line model also reveal unsteady aerodynamic characteristics that cannot be captured by lower-fidelity models. For the upstream rotor, the yaw misalignment results in time-varying change in the local angle of attack on the blade, giving rise to unsteady loading. The downstream rotor is partially submerged in the deflected wake incurred by the yawed upstream rotor. As the blade revolves into and out of the wake deficit, the blade experiences cyclic loading, leading to even stronger fluctuations in the aerodynamic loads than the upstream rotor. These analysis provides a comprehensive understanding of the yaw control effects on the two tandem rotors from the perspectives of aerodynamic performance, wake profiles, and unsteady characteristics. In conclusion, the insights gained from the present study can aid the design of collective yaw control strategies of wind farms, and lay the foundation for assessing the fatigue damage associated with yaw misalignment.

17 WIND ENERGY↗
DOE OSTI2022

Blue economy for a sustainable future

Oceans are expected to become the next great economic frontier, with enormous potential for innovations and development across multiple sectors. To optimize co-benefits for the well-being of people and the planet, it’s vital that we pursue the blue economy in a sustainable manner. Here, this Voices asks: where and what are the opportunities to steer a sustainable, resilient, and inclusive blue economy?

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Deuterated water as a substrate-agnostic isotope tracer for investigating reversibility and thermodynamics of reactions in central carbon metabolism

Stable isotope tracers are a powerful tool for the quantitative analysis of microbial metabolism, enabling pathway elucidation, metabolic flux quantification, and assessment of reaction and pathway thermodynamics. 13 C and 2 H metabolic flux analysis commonly relies on isotopically labeled carbon substrates, such as glucose. However, the use of 2 H-labeled nutrient substrates faces limitations due to their high cost and limited availability in comparison to 13 C-tracers. Furthermore, isotope tracer studies in industrially relevant bacteria that metabolize complex substrates such as cellulose, hemicellulose, or lignocellulosic biomass, are challenging given the difficulty in obtaining these as isotopically labeled substrates. In this study, we examine the potential of deuterated water ( 2 H 2 O) as an affordable, substrate-neutral isotope tracer for studying central carbon metabolism. We apply 2 H 2 O labeling to investigate the reversibility of glycolytic reactions across three industrially relevant bacterial species -C. thermocellum, Z. mobilis, and E. coli-harboring distinct glycolytic pathways with unique thermodynamics. We demonstrate that 2 H 2 O labeling recapitulates previous reversibility and thermodynamic findings obtained with established 13 C and 2 H labeled nutrient substrates. Furthermore, we exemplify the utility of this 2 H 2 O labeling approach by applying it to high-substrate C. thermocellum fermentations -a setting in which the use of conventional tracers is impractical-thereby identifying the glycolytic enzyme phosphofructokinase as a major bottleneck during high-substrate fermentations and unveiling critical insights that will steer future engineering efforts to enhance ethanol production in this cellulolytic organism. This study demonstrates the utility of deuterated water as a substrate-agnostic isotope tracer for examining flux and reversibility of central carbon metabolic reactions, which yields biological insights comparable to those obtained using costly 2 H-labeled nutrient substrates.

09 BIOMASS FUELS↗
DOE OSTI2021

High-power non-perturbative laser delivery diagnostics at the final focus of 100-TW-class laser pulses

Controlling the delivery of multi-terawatt and petawatt laser pulses to final focus, both in position and angle, is critical to many laser applications such as optical guiding, laser–plasma acceleration, and laser-produced secondary radiation. We present an online, non-destructive laser diagnostic, capable of measuring the transverse position and pointing angle at focus. The diagnostic is based on a unique double-surface-coated wedged-mirror design for the final steering optic in the laser line, producing a witness beam highly correlated with the main beam. By propagating low-power kilohertz pulses to focus, we observed spectra of focus position and pointing angle fluctuations dominated by frequencies below 70 Hz. The setup was also used to characterize the excellent position and pointing angle correlation of the 1 Hz high-power laser pulses to this low-power kilohertz pulse train, opening a promising path to fast non-perturbative feedback concepts even on few-hertz-class high-power laser systems.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

A vortex sheet based analytical model of the curled wake behind yawed wind turbines

Motivated by the need for compact descriptions of the evolution of non-classical wakes behind yawed wind turbines, we develop an analytical model to predict the shape of curled wakes. Interest in such modelling arises due to the potential of wake steering as a strategy for mitigating power reduction and unsteady loading of downstream turbines in wind farms. We first estimate the distribution of the shed vorticity at the wake edge due to both yaw offset and rotating blades. By considering the wake edge as an ideally thin vortex sheet, we describe its evolution in time moving with the flow. Vortex sheet equations are solved using a power series expansion method, and an approximate solution for the wake shape is obtained. The vortex sheet time evolution is then mapped into a spatial evolution by using a convection velocity. Apart from the wake shape, the lateral deflection of the wake including ground effects is modelled. Our results show that there exists a universal solution for the shape of curled wakes if suitable dimensionless variables are employed. For the case of turbulent boundary layer inflow, the decay of vortex sheet circulation due to turbulent diffusion is included. Finally, we modify the Gaussian wake model by incorporating the predicted shape and deflection of the curled wake, so that we can calculate the wake profiles behind yawed turbines. Model predictions are validated against large-eddy simulations and laboratory experiments for turbines with various operating conditions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

4D-STEM of Beam-Sensitive Materials

We report that a scanning electron nanobeam diffraction, or 4D-STEM (four-dimensional scanning transmission electron microscopy), is a flexible and powerful approach to elucidate structure from "soft" materials that are challenging to image in the transmission electron microscope because their structure is easily damaged by the electron beam. In a 4D-STEM experiment, a converged electron beam is scanned across the sample, and a pixelated camera records a diffraction pattern at each scan position. This four-dimensional data set can be mined for various analyses, producing maps of local crystal orientation, structural distortions, crystallinity, or different structural classes. Holding the sample at cryogenic temperatures minimizes diffusion of radicals and the resulting damage and disorder caused by the electron beam. The total fluence of incident electrons can easily be controlled during 4D-STEM experiments by careful use of the beam blanker, steering of the localized electron dose, and by minimizing the fluence in the convergent beam thus minimizing beam damage. This technique can be applied to both organic and inorganic materials that are known to be beam-sensitive; they can be highly crystalline, semicrystalline, mixed phase, or amorphous. One common example is the case for many organic materials that have a π-π stacking of polymer chains or rings on the order of 3.4-4.2 Å separation. If these chains or rings are aligned in some regions, they will produce distinct diffraction spots (as would other crystalline spacings in this range), though they may be weak or diffuse for disordered or weakly scattering materials. We can reconstruct the orientation of the π-π stacking, the degree of π-π stacking in the sample, and the domain size of the aligned regions. This Account summarizes illumination conditions and experimental parameters for 4D-STEM experiments with the goal of producing images of structural features for materials that are beam-sensitive. We will discuss experimental parameters including sample cooling, probe size and shape, fluence, and cameras. 4D-STEM has been applied to a variety of materials, not only as an advanced technique for model systems, but as a technique for the beginning microscopist to answer materials science questions. It is noteworthy that the experimental data acquisition does not require an aberration-corrected TEM but can be produced on a variety of instruments with the right attention to experimental parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Controlling Heterogeneous Catalysis with Organic Monolayers on Metal Oxides

A key theme of heterogeneous catalysis research is achieving control of the environment surrounding the active site to precisely steer the reactivity toward desired reaction products. One method toward this goal has been the use of organic ligands or self-assembled monolayers (SAMs) on metal nanoparticles. Metal-bound SAMs are typically employed to improve catalyst selectivity but often decrease the reaction rate as a result of site blocking from the ligands. Recently, the use of metal oxide-bound organic modifiers such as organophosphonic acid (PA) SAMs has shown promise as an additional method for tuning reactions on metal oxide surfaces as well as modifying oxide-supported metal catalysts. In this Account, we summarize recent approaches to enhance catalyst performance with oxide-bound monolayers. These approaches include (1) modification of metal oxide catalysts to tune surface reactions, (2) formation of SAMs on the oxide component of supported metal catalysts to modify sites at the metal–support interface, and (3) enhancement of catalyst performance (e.g., stability) through modification of sites remote from the active sites. Further, both the headgroups and organic tail groups of PA SAMs or other ligands can influence reactions on metal oxide surfaces. Binding of the headgroup can selectively poison certain active sites, altering the selectivity in a manner analogous to metal-bound ligands (at the expense of active site quantity). Moreover, tail groups can be functionalized to interact favorably with reactants and intermediates, for instance through dipole–dipole interactions. On supported metal catalysts like Pt/Al 2 O 3 , PA SAMs can selectively form on the oxide support. This selective deposition allows for modification of the metal–support interface with minimal blockage of metal sites. PA headgroups were shown to provide tunable acid sites at the interface, dramatically improving hydrodeoxygenation rates of various alcohols. Additionally, organic tail functionality was used to activate or stabilize specific reactants at the interface, such as with the use of amine-functionalized PAs to stabilize chemisorption of CO 2 during the reverse water gas shift reaction. PAs have also been found to affect the electronic properties of bulk metal sites through long-range electron withdrawal via the oxide, providing an additional avenue to tune catalytic behavior. Finally, organic modifiers were shown to enhance catalytic performance without directly modifying the active site. For instance, in biphasic liquid environments the modification of catalyst particles with hydrophobic or hydrophilic SAMs shifts the selectivity of multipath reactions on the basis of the hydrophobicities of different intermediates and products. As another “long-range” effect, the deposition of ligands on oxide supports improved catalyst stability through both improved resistance to sintering and suppression of active site poisoning. The recent contributions discussed in this Account demonstrate the versatility and significant potential for the approach of modifying catalysts with oxide-bound organic monolayers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Compositions and Formation Mechanisms of Solid-Electrolyte Interphase on Microporous Carbon/Sulfur Cathodes

We report the formation mechanism and compositions of a solid-electrolyte interphase (SEI) on a microporous carbon/sulfur (MC/S) cathode in Li–S batteries using a carbonate-based electrolyte (1 M LiPF 6 in ethylene carbonate (EC)/dimethyl carbonate, v:v = 1:1). Through characterizations using 1D and 2D solution-phase nuclear magnetic resonance spectroscopy, coupled with model chemical reactions and DFT calculations, we have identified two critical roles of Li + in steering the SEI formation. First, the preferential solvation of Li + by EC in the mixed carbonate electrolyte renders EC as the dominant participant in the SEI formation, and second, Li + coordination to the EC carbonyl alters activation barriers and changes the reaction pathways relative to Na + . The main organic components in the SEI are identified as lithium ethylene monocarbonate and lithium methyl carbonate, which are virtually identical to those formed on Li and graphite anodes of lithium-ion batteries but via a different pathway.

25 ENERGY STORAGE↗
DOE OSTI2023

Toward Quantum Chemical Free Energy Simulations of Platinum Nanoparticles on Titania Support

Platinum nanoparticles (Pt-NPs) supported on titania surfaces are costly but indispensable heterogeneous catalysts because of their highly effective and selective catalytic properties. Therefore, it is vital to understand their physicochemical processes during catalysis to optimize their use and to further develop better catalysts. However, simulating these dynamic processes is challenging due to the need for a reliable quantum chemical method to describe chemical bond breaking and bond formation during the processes but, at the same time, fast enough to sample a large number of configurations required to compute the corresponding free energy surfaces. Density functional theory (DFT) is often used to explore Pt-NPs; nonetheless, it is usually limited to some minimum-energy reaction pathways on static potential energy surfaces because of its high computational cost. In this work, we report a combination of the density functional tight binding (DFTB) method as a fast but reliable approximation to DFT, the steered molecular dynamics (SMD) technique, and the Jarzynski equality to construct free energy surfaces of the temperature-dependent diffusion and growth of platinum particles on a titania surface. In particular, we present the parametrization for Pt-X (X = Pt, Ti, or O) interactions in the framework of the second-order DFTB method, using a previous parametrization for titania as a basis. The optimized parameter set was used to simulate the surface diffusion of a single platinum atom (Pt 1 ) and the growth of Pt 6 from Pt 5 and Pt 1 on the rutile (110) surface at three different temperatures (T = 400, 600, 800 K). The free energy profile was constructed by using over a hundred SMD trajectories for each process. We found that increasing the temperature has a minimal effect on the formation free energy; nevertheless, it significantly reduces the free energy barrier of Pt atom migration on the TiO 2 surface and the transition state (TS) of its deposition. In a concluding remark, the methodology opens the pathway to quantum chemical free energy simulations of Pt-NPs’ temperature-dependent growth and other transformation processes on the titania support.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Functional Connectivity of Red Chlorophylls in Cyanobacterial Photosystem I Revealed by Fluence-Dependent Transient Absorption

External stressors modulate the oligomerization state of photosystem I (PSI) in cyanobacteria. The number of red chlorophylls (Chls), pigments lower in energy than the P700 reaction center, depends on the oligomerization state of PSI. Here, we use ultrafast transient absorption spectroscopy to interrogate the effective connectivity of the red Chls in excitonic energy pathways in trimeric PSI in native thylakoid membranes of the model cyanobacterium Synechocystis sp. PCC 6803, including emergent dynamics, as red Chls increase in number and proximity. Fluence-dependent dynamics indicate singlet–singlet annihilation within energetically connected red Chl sites in the PSI antenna but not within bulk Chl sites on the picosecond time scale. These data support picosecond energy transfer between energetically connected red Chl sites as the physical basis of singlet–singlet annihilation. The time scale of this energy transfer is faster than predicted by Förster resonance energy transfer calculations, raising questions about the physical mechanism of the process. Our results indicate distinct strategies to steer excitations through the PSI antenna; the red Chls present a shallow reservoir that direct excitations away from P 700 , extending the time to trapping by the reaction center.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Closing the Gap Between Experiment and Theory: Reactive Scattering of HCl from Au(111)

Accurate simulation of molecules reacting on metal surfaces, which can help in improving heterogeneous catalysts, remains out of reach for several reactions. For example, a large disagreement between theory and experiment for HCl reacting on Au(111) still remains, despite many efforts. In this work, the dissociative chemisorption of HCl on Au(111) is investigated with a recently developed MGGA density functional (MS-RPBEl) and a high-dimensional neural network potential. Additionally, previous experimental sticking probabilities are re-examined. A considerably improved agreement between experiment and theory is obtained, although theory still overestimates experimental sticking probabilities by a factor of 2-7 at the highest incidence energy. Computed and measured vibrational transition probabilities are also in improved agreement. Several dynamical effects such as angular steering and energy transfer from the molecule to the surface are found to play an important role.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Ligand-Structure-Dependent Coherent Vibrational Wavepacket Dynamics in Pyrazolate-Bridged Pt(II) Dimers

Bimetallic transition metal complexes have gained increasing attention because of their versatile functions in solar energy conversion and photonics applications arising from inter-metal electronic coupling. In bimetallic platinum (Pt) complexes, electronic communication between the Pt-centered and ligand-centered moieties have been shown to be critical for defining their excited-state dynamic trajectories undergoing either localized ligand centered (LC)/metal-to-ligand-charge-transfer (MLCT) transitions or delocalized metal-metal-to-ligand-charge-transfer (MMLCT) transitions. The branching of the excited-state intersystem crossing (ISC) trajectories are modulated through structural factors that alter the relative energies of the different states. In this study, we investigated the correlation of the structural factors influencing the excited state trajectories. Using femtosecond broadband transient absorption (fs-BBTA) spectroscopy, ultrafast dynamics in the excited state of two select Pt(II) dimers have been mapped out using their coherent vibrational wavepacket signatures in corresponding transient absorption spectra. To examine how the ligand moieties of the Pt(II) dimers influence excited-state dynamics and the coherent vibrational wavepacket behavior, here we carried out comparative studies on two pyrazolate-bridged Pt(II) dimers of the general formula [Pt( t Bu 2 Pz)(N^C)] 2 ( t Bu 2 Pz = 3,5-di-tert-butylpyrazole); N^C = 7,8-benzoquinoline (bzq, 1) or 1-phenylisoquinoline (piq, 2)). We found that photoexcitation into the low energy absorption bands of 1 and 2 respectively induce the formation of 1 MMLCT states from which ultrafast ISC proceeds, resulting in stimulated emission quenching and decoherence of the vibrational wavepacket motions. The results obtained in this study suggest that both energetics and the structural rigidity of the aromatic cyclometalating ligands in 1 and 2 can significantly influence dynamics along the excited state trajectory characterized by dephasing of the coherent oscillations. The collective results provide direct evidence of how ligand structure alters electronic dynamics along excited state trajectories associated with ISC processes, providing insight into using ligand design to steer photochemical processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Unraveling 1-Hexene Hydrogenation over Dilute Pd-in-Au Alloys

Dilute Pd-in-Au alloys are valuable materials for selectively hydrogenating alkynes and isomerizing alkenes. By diluting Pd in a Au host, the selectivity toward semihydrogenated alkene isomers can be significantly enhanced and the unfavorable overhydrogenation to alkanes is suppressed. However, a detailed mechanistic study on the origin of the enhanced alkene selectivity over dilute alloy catalysts is still missing. Here, we combine experiment and theory to unravel the reaction mechanism, identifying rate-limiting and selectivity-controlling steps in 1-hexene hydrogenation over dilute Pd-in-Au catalysts. Using isotope-exchange hydrogenation experiments, we show that 1-hexene and hydrogen over a bimetallic Pd4Au96 in silica catalyst preferentially form 1-hexene isomers, (trans and cis) 2- and 3-hexene and only a small amounts of hexane. The reaction is consistent with a Horiuti–Polanyi mechanism, similar to a monometallic Pd nanoparticle catalyst. Computation of the free-energy profiles for 1-hexene hydrogenation and isomerization over a single Pd atom in a Au surface using first principles calculations indicated that the isomerization of 1-hexene to 2-hexene is energetically favorable due to the relatively large barrier for H2 dissociation preventing hydrogenation to n-hexane. Microkinetic modeling established that H2 dissociation on the single-atom Pd sites and H spillover from these sites onto the Au host are rate-limiting and key in steering the selectivity of dilute Pd-in-Au alloys toward the hexene isomers. Furthermore, the mechanistic insights from this study contribute to the rational design of optimized dilute alloy catalysts for selective alkene isomerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Interplay of Mechanochemistry and Material Processes in the Graphite to Diamond Phase Transformation

The manifestation of intramolecular strains in covalent systems is widely known to accelerate chemical reactions and open alternative reaction paths. This process is moderately well understood for isolated molecules and unimolecular processes. However, in condensed matter processes such as phase transformations, material properties and structure may influence typical mechanochemical effects. Therefore, we utilize steered molecular dynamics to induce out of plane strains in graphite and compress the system under a constant strain rate to induce phase transformation. We show that the out of plane strain allows phase transformations to initiate at small amounts of compressive strain. Yet, in contrast to typical mechanochemical results, the sum of compressive and out of plane work needed to form a diamond has a local minimum due to altered defect formation processes during phase transformation. Additionally, these altered processes slow the kinetics of the phase transformation, taking longer from initiation to total material transformation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

All-Atom Modeling and Simulation of Biopolymer Interface: Dual Role of Antifouling Polymer Brushes

Antifouling polymer brushes are well-known for their exceptional resistance to unwanted protein adsorption. While experimental studies have extensively characterized protein–polymer brush interactions, computational investigations remain limited, largely due to the challenges in accurately modeling and integrating these complex, multicomponent systems without resorting to oversimplification. To address this challenge, this study presents one of the most comprehensive and realistic model systems to date, comprising the substrate, grafted polymers, and proteins. Our work interprets the interactions between polymer brush and protein based on realistic modeling without simplification. In particular, this study utilizes molecular modeling and simulation of polycationic and polyzwitterionic brushes─poly(dimethylaminoethyl methacrylate) (PDMAEMA), poly(2-(N-oxide-N,N-dimethylamino)ethyl methacrylate) (PNOMA), and poly(2-(N-3-sulfopropyl-N,N-dimethylammonium)ethyl methacrylate) (PSBMA)─grafted onto α-quartz substrates via polymerization initiator linkers. The brush models were developed to closely replicate experimentally synthesized samples and to provide detailed insights into structural and dynamical changes at the molecular level during protein adsorption. Using steered molecular dynamics simulations, we show that the PSBMA brush, due to its high local density, exhibits the greatest resistance to protein insertion. Cα root-mean-square deviation and interaction pattern analyses further reveal that the PSBMA brush also induces the most significant destabilization of lysozyme, while the PDMAEMA brush enhances protein stability through ion-mediated interactions. The PNOMA brush, while requiring the lowest force for protein adsorption, induces greater protein destabilization than the PDMAEMA brush, primarily due to electrostatic repulsion caused by a short carbon spacer length. Hydration analysis reveals that both the PSBMA brush and the lysozyme interacting with it exhibit the most rapid dehydration, attributed to the brush’s high local chain density, which results in the greatest lysozyme destabilization and the highest adsorption force. These findings highlight the dual role of antifouling polymer brushes: resisting protein adsorption and modulating protein structural dynamics. In conclusion, this study provides valuable insights for the rational design of next-generation antifouling materials and offers a framework for realistic model development in complex multicomponent systems.

Adsorption↗
DOE OSTI2023

Co 2 Mo 6 S 8 Catalyzes Nearly Exclusive Electrochemical Nitrate Conversion to Ammonia with Enzyme-like Activity

Electrocatalytic nitrate to ammonia conversion is a key reaction for energy and environmental sustainability. This reaction involves complex multi electron and proton transfer steps, and is impeded by the lack of catalyst for promoting both reactivity and ammonia selectivity. Here, we demonstrate active motifs based on the Chevrel phase Co 2 Mo 6 S 8 exhibit an enzyme-like high turnover frequency of ~95.1 s –1 for nitrate electroreduction to ammonia. We reveal strong synergy of multiple binding sites on this catalyst, such that the ligand effect of Co steers H ad* toward hydrogenation other than hydrogen evolution, the ensemble effect of Co, and the spatial confinement effect that promote the full hydrogenation of NO x to ammonia without N–N coupling. The catalyst exhibits almost exclusive ammonia conversion with a Faradaic efficiency of 97.1% and ammonia yielding rate of 115.5 mmol·g cat –1 ·h –1 in neutral electrolytes. The high activity was also confirmed in electrolytes with dilute nitrate and high chloride concentrations.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Optical Excitation of a Nanoparticle Cu/p-NiO Photocathode Improves Reaction Selectivity for CO 2 Reduction in Aqueous Electrolytes

We report the light-induced modification of catalytic selectivity for photoelectrochemical CO 2 reduction in aqueous media using copper (Cu) nanoparticles dispersed onto p-type nickel oxide (p-NiO) photocathodes. Optical excitation of Cu nanoparticles generates hot electrons available for driving CO 2 reduction on the Cu surface, while charge separation is accomplished by hot-hole injection from the Cu nanoparticles into the underlying p-NiO support. Photoelectrochemical studies demonstrate that optical excitation of plasmonic Cu/p-NiO photocathodes imparts increased selectivity for CO 2 reduction over hydrogen evolution in aqueous electrolytes. Specifically, we observed that plasmon-driven CO 2 reduction increased the production of carbon monoxide and formate, while simultaneously reducing the evolution of hydrogen. Our results demonstrate an optical route toward steering the selectivity of artificial photosynthetic systems with plasmon-driven photocathodes for photoelectrochemical CO 2 reduction in aqueous media.

25 ENERGY STORAGE↗