Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “state distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Where do the Apollo objects come from?

The orbital evolutions of 1-45 km-diameter Apollo and Amor bodies generated by asteroid belt collisions interior to 2.6 AU are presently traced by Monte Carlo calculations. About 3 percent of the asteroidal fragments of this type and size that are ejected with velocities of 100 m/sec are perturbed into earth-crossing orbits by the 3:1 Jovian commensurability resonance at 2.5 AU, as well as a secular resonance in the innermost asteroid belt. While the initial earth-crossing orbits of these bodies are concentrated near 1 AU, their steady-state orbital distribution is widely dispersed. Additional objects that may be characterized as inactive comets are inferred from strongly suggestive data.

Wetherill, G. W.↗

A finite element formulation for the large deflection random response of thermally buckled beams

The effects of temperature and acoustic loading are included in a theoretical finite element large deflection formulation for thin, isotropic beams. Thermal loads are applied as steady-state temperature distributions, and acoustic loads are taken to be ergodic and Gaussian with zero mean and uniform magnitude and phase along the length of the beam. Material properties are considered presently to be independent of temperature. Also, inplane and rotary inertia terms are assumed to be negligible, and all inplane edge conditions are taken to be immovable. For the random response analysis, both auto- and cross-correlation terms are included. The nature of the loads leads to the solution of two separate problems. First, the problem of thermal postbuckling is solved to determine the deflections and stresses due to the thermal load only. These deflections and stresses are then used as initial deflections and stresses for the random vibration analysis. Root-mean-square (RMS) maximum deflections and strains are obtained and compared with previous classical equivalent linearization results.

Locke, James↗

Frequency response of a thermocouple wire: Effects of axial conduction

Theoretical expressions are derived for the steady-state frequency response of a thermocouple wire. In particular, the effects of axial heat conduction are demonstrated for both a uniform thermocouple wire and a nonuniform wire with unequal material properties and wire diameters across the junction. For the case of a uniform wire, the amplitude ratio and phase angle compare favorably with the series solution of Scadron and Warshawsky (1952) except near the ends of the wire. For the case of a non-uniform wire, the amplitude ratio at low frequency omega yields 0 agrees with the results of Scadron and Warshawsky for a steady-state temperature distribution. Moreover, the frequency response for a non-uniform wire in the limit of infinite length l yields infinity is shown to reduce to a simple expression that is analogous to the classic first order solution for a thermocouple wire with uniform properties.

Forney, L. J.↗

Possible Martian brines - Radar observations and models

The 1971 and 1973 Goldstone 12.6-cm radar observations of Mars are separate data sets which include reflectivity as a function of latitude, longitude, and season. It has been argued that secular reflectivity variations of Mars' surface are indicated by the data and that shallow subsurface melting is the causal mechanism most compatible with the observations; however, the melting hypothesis conflicts with accepted notions of the state and distribution of water on Mars. The data are examined to identify temporal and spatial domains within which statistically significant changes in measured reflectivity are clustered. Brines which might satisfy the best supported reflectivity variations are out of equilibrium with the chemical megaenvironment. It is unclear whether such a brine, if emplaced in the Martian regolith at a depth shallow enough to affect the radar reflectivity, could survive even a single freeze-thaw cycle. Some combination of unique scattering properties or some as yet unidentified process other than melting is responsible for any genuine reflectivity variations.

Zent, Aaron P.↗

Viscosity and mass transport in nonuniform Keplerian disks

A quantitative formalism for Keplerian particulate disk dynamics having its basis in a heuristic description of viscous transport is presently applied to the case of a ring with optical thickness radial gradient. A steady-state velocity distribution solution directly yields both the radial mass transport and the viscosity. The analytical method employed involves the solution of a novel form of the Krook equation through the separation of the phase-space collisional-products distribution into a symmetrical component and a delta function-approachable remainder. While this model is simplified for the case treated, its general approach may be extended to less artificially restricted cases.

Ojakangas, G. W.↗

An iodine hypersonic wind tunnel for the study of nonequilibrium reacting flows

A pilot scale hypersonic wind tunnel operating on pure iodine vapor has been designed and tested. The wind tunnel operates intermittently with a run phase lasting approximately 20 minutes. Successful recirculation of the iodine used during the run phase has been achieved but can be improved. Relevant issues regarding the full scale facility's design and operation, and the use of iodine as a working gas are discussed. Continuous wave laser induced fluorescence was used to monitor number densities within the plume flowfield, while pulsed laser induced fluorescence was used in an initial attempt to measure vibrational energy state population distributions. Preliminary nozzle flow calculations based on finite rate chemistry are presented.

Pham-Van-diep, G. C.↗

The evidences of waves in the atmospheres of Venus and Mars

In the last 15 years, distributions of state properties and velocities measured in the atmospheres of Venus and Mars have indicated the presence of waves of varied types occurring from the lower atmosphere to the exosphere. This paper gives an organized picture of observations which indicate and characterize wave phenomena in the Venusian and Martian atmospheres, to illustrate how widely they occur, and to emphasize the probable importance of waves to the dynamics. Some of the Pioneer Venus Probe observations presented have not been previously discussed in the context of waves.

Seiff, Alvin↗

Finite element large deflection random response of thermally buckled plates

The governing nonlinear equations of motion are derived for a rectangular isotropic plate subjected to a combined thermal-acoustic loading. The thermal loading is taken to be a steady state temperature distribution, and the acoustic loading is considered to be a stationary Gaussian pressure with zero mean and uniform magnitude and phase over the plate surface. With these types of loads, the thermal-acoustic analysis can be separated into two problems: (1) thermal post-buckling; and (2) random vibration of the thermally buckled plate. Since both analyses are nonlinear, iterative techniques are used to solve each. For the random vibration analysis, the method of equivalent linearization is used; both auto- and cross-correlation terms are included. Results obtained using the present formulation are compared with previous classical equivalent linearization results.

Locke, J. E.↗

Vibration analysis of heated anisotropic plates with free edge conditions

Tabular and plotted results are presented (as a function of lamination angle and temperature) for the first two vibration frequencies and mode shapes of a heated, single-layer Boron/epoxy laminate. A Ritz formulation is used to determine the thermally induced in-plane forces and the out-of-plane vibration frequencies. This approach is formulated in terms of the out-of-plane displacement and the in-plane stress function; both the displacement and the stress function are expressed as simple algebraic polynomials modified to satisfy the essential boundary conditions. Heating is applied as a steady-state temperature distribution; material properties are considered to be temperature-dependent. To establish the correctness and effectiveness of the method, the in-plane forces are compared with Fourier series analytical results.

Locke, James E.↗

Effect of temperature on nonlinear two-dimensional panel flutter using finite elements

A finite element formulation and solution procedures is presented for limit-cycle motions of 2D panels subjected simultaneously to thermal and aerodynamic loads. The thermal load is described by a steady-state temperature distribution and the quasi-steady first-order piston theory is used for aerodynamic pressure. The von Karman nonlinear strain-displacement relationship is used for the large panel deflections. Three temperature distributions are evaluated: (1) uniform; (2) symmetric sinusoidal varying temperature along panel length; and (3) linearly varying temperature through panel thickness. The influence of these three temperature distributions on limit-cycle motions and flutter boundaries of a simply supported 2D panel is investigated.

Mei, Chuh↗

Insensitivity of Line-Ratio Diagnostics to Steady-State Non-Maxwellian Electron Distributions in Solar Corona

We examine the idea that the corona is heated by a population of nonthermal particles. An upper limit on the size of the nonthermal population is derived by assuming that all of the radiation and conduction losses in the corona are provided by the nonthermal tail of the particle distribution. Only a very small percentage of nonthermal particles are allowed. These particles have a negligable effect on temperature sensitive line ratios typically observed in the EUV (Extreme Ultraviolet Radiation).

Falconer, D. A.↗

Solid-State Power Generating Microdevices for Distributed Space System Architectures

Deep space missions have a strong need for compact, high power density, reliable and long life electrical power generation and storage under extreme temperature conditions. Conventional power generating devices become inefficient at very low temperatures (temperatures lower than 200 K encountered during Mars missions for example) and rechargeable energy storage devices cannot be operated thereby limiting mission duration. At elevated temperatures (for example for planned solar probe or Venus lander missions), thin film interdiffusion destroys electronic devices used for generating and storing power. Solar power generation strongly depends upon the light intensity, which falls rapidly in deep interplanetary missions (beyond 5 AU), and in planetary missions in the sun shadow or in dusty environments (Mars, for example). Radioisotope thermoelectric generators (RTGs) have been successfully used for a number of deep space missions RTGs. However, their energy conversion efficiency and specific power characteristics are quite low, and this technology has been limited to relatively large systems (more than 100 W). The National Aeronautics and Space Administration (NASA) and the Jet Propulsion Laboratory (JPL) have been planning the use of much smaller spacecrafts that will incorporate a variety of microdevices and miniature vehicles such as microdetectors, microsensors, and microrovers. Except for electrochemical batteries and solar cells, there are currently no available miniaturized power sources. Novel technologies that will function reliably over a long duration mission (ten years and over), in harsh environments (temperature, pressure, and atmosphere) must be developed to enable the success of future space missions. It is also expected that such micropower sources could have a wide range of terrestrial applications, in particular when the limited lifetime and environmental limitations of batteries are key factors. Additional information is contained in the original extended abstract.

Fleurial, J.-P.↗

A Proposal for an Integrated Geophysical Strategy to "Follow the Water" on Mars

In this abstract we propose an integrated strategy for the geophysical exploration of Mars that we believe represents the fastest, most cost-effective, and technically capable approach to identifying the state and distribution of subsurface water. Additional information is contained in the original extended abstract.

Clifford, S. M.↗

A Method of Determining Aerodynamic-Influence Coefficients from Wind-Tunnel Data for Wings at Supersonic Speeds

A method is described for determining aerodynamic-influence coefficients from wind-tunnel data for calculating the steady-state load distribution on a wing with arbitrary angle-of-attack distribution at supersonic speeds. The method combines linearized theory with empirical adjustments in order to give accurate results over a wide range of angles of attack. The experimented data required are pressure distributions measured on a flat wing of the desired planform at the desired Mach number and over the desired range of angles of attack. The method has been tested by applying it to wind-tunnel data measured at Mach numbers of 1.61 and 2.01 on wings of the same planform but of different surface shapes. Influence coefficients adjusted to fit the flat wing gave good predictions of the spanwise and chord-wise distributions of loadings measured on twisted and cambered wings.

Gainer, Patrick A.↗

Integrating Indigenous Traditional, Local and Scientific Knowledge for Improved Management, Policy and Decision-Making in Reindeer Husbandry in the Russian Arctic

As scientists and policy-makers from both indigenous and non-indigenous communities begin to build closer partnerships to address common sustainability issues such as the health impacts of climate change and anthropogenic activities, it becomes increasingly important to create shared information management systems which integrate all relevant factors for optimal information sharing and decision-making. This paper describes a new GIs-based system being designed to bring local and indigenous traditional knowledge together with scientific data and information, remote sensing, and information technologies to address health-related environment, weather, climate, pollution and land use change issues for improved decision/policy-making for reindeer husbandry. The system is building an easily-accessible archive of relevant current and historical, traditional, local and remotely-sensed and other data and observations for shared analysis, measuring, and monitoring parameters of interest. Protection of indigenous culturally sensitive information will be respected through appropriate data protocols. A mechanism which enables easy information sharing among all participants, which is real time and geo-referenced and which allows interconnectivity with remote sites is also being designed into the system for maximum communication among partners. A preliminary version of our system will be described for a Russian reindeer test site, which will include a combination of indigenous knowledge about local conditions and issues, remote sensing and ground-based data on such parameters as the vegetation state and distribution, snow cover, temperature, ice condition, and infrastructure.

Maynard, Nancy G.↗

Detection of chaotic determinism in time series from randomly forced maps

Time series from biological system often display fluctuations in the measured variables. Much effort has been directed at determining whether this variability reflects deterministic chaos, or whether it is merely "noise". Despite this effort, it has been difficult to establish the presence of chaos in time series from biological sytems. The output from a biological system is probably the result of both its internal dynamics, and the input to the system from the surroundings. This implies that the system should be viewed as a mixed system with both stochastic and deterministic components. We present a method that appears to be useful in deciding whether determinism is present in a time series, and if this determinism has chaotic attributes, i.e., a positive characteristic exponent that leads to sensitivity to initial conditions. The method relies on fitting a nonlinear autoregressive model to the time series followed by an estimation of the characteristic exponents of the model over the observed probability distribution of states for the system. The method is tested by computer simulations, and applied to heart rate variability data.

Non-NASA Center↗

Detection of "noisy" chaos in a time series

Time series from biological system often displays fluctuations in the measured variables. Much effort has been directed at determining whether this variability reflects deterministic chaos, or whether it is merely "noise". The output from most biological systems is probably the result of both the internal dynamics of the systems, and the input to the system from the surroundings. This implies that the system should be viewed as a mixed system with both stochastic and deterministic components. We present a method that appears to be useful in deciding whether determinism is present in a time series, and if this determinism has chaotic attributes. The method relies on fitting a nonlinear autoregressive model to the time series followed by an estimation of the characteristic exponents of the model over the observed probability distribution of states for the system. The method is tested by computer simulations, and applied to heart rate variability data.

Non-NASA Center↗

Space Based Ornithology: On the Wings of Migration and Biophysics

The study of bird migration on a global scale is one of the compelling and challenging problems of modern biology with major implications for human health and conservation biology. Migration and conservation efforts cross national boundaries and are subject to numerous international agreements and treaties. Space based technology offers new opportunities to shed understanding on the distribution and migration of organisms on the planet and their sensitivity to human disturbances and environmental changes. Migration is an incredibly diverse and complex behavior. A broad outline of space based research must address three fundamental questions: (1) where could birds be, i.e. what is their fundamental niche constrained by their biophysical limits? (2) where do we actually find birds, i.e. what is their realizable niche as modified by local or regional abiotic and biotic factors, and (3) how do they get there (and how do we know?), that is what are their migration patterns and associated mechanisms? Our working hypothesis is that individual organism biophysical models of energy and water balance, driven by satellite measurements of spatio-temporal gradients in climate and habitat, will help us to explain the variability in avian species richness and distribution. Dynamic state variable modeling provides one tool for studying bird migration across multiple scales and can be linked to mechanistic models describing the time and energy budget states of migrating birds. Such models yield an understanding of how a migratory flyway and its component habitats function as a whole and link stop-over ecology with biological conservation and management. Further these models provide an ecological forecasting tool for science and application users to address what are the possible consequences of loss of wetlands, flooding, drought or other natural disasters such as hurricanes on avian biodiversity and bird migration.

Smith, James A.↗