Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “spectral reflectance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Geologic remote sensing

Remote-sensing techniques based on the analysis of spectral reflectance, spectral emittance, thermal inertia, and radar measurements are reviewed. Specific applications of Landsat multispectral scanner are examined with emphasis on mineral exploration. The potential of satellite systems for detailed lithologic mapping is pointed out.

Goetz, A. F. H.↗
NASA NTRS2012

Absolute Radiometric Calibration of Narrow-Swath Imaging Sensors with Reference to Non-Coincident Wide-Swath Sensors

An inter-calibration method is developed to provide absolute radiometric calibration of narrow-swath imaging sensors with reference to non-coincident wide-swath sensors. The method predicts at-sensor radiance using non-coincident imagery from the reference sensor and knowledge of spectral reflectance of the test site. The imagery of the reference sensor is restricted to acquisitions that provide similar view and solar illumination geometry to reduce uncertainties due to directional reflectance effects. Spectral reflectance of the test site is found with a simple iterative radiative transfer method using radiance values of a well-understood wide-swath sensor and spectral shape information based on historical ground-based measurements. At-sensor radiance is calculated for the narrow-swath sensor using this spectral reflectance and atmospheric parameters that are also based on historical in situ measurements. Results of the inter-calibration method show agreement on the 2 5 percent level in most spectral regions with the vicarious calibration technique relying on coincident ground-based measurements referred to as the reflectance-based approach. While the variability of the inter-calibration method based on non-coincident image pairs is significantly larger, results are consistent with techniques relying on in situ measurements. The method is also insensitive to spectral differences between the sensors by transferring to surface spectral reflectance prior to prediction of at-sensor radiance. The utility of this inter-calibration method is made clear by its flexibility to utilize image pairings with acquisition dates differing in excess of 30 days allowing frequent absolute calibration comparisons between wide- and narrow-swath sensors.

McCorkel, Joel↗
DOE OSTI2021

Modeling Spectrally-Selective Reflection for Thermal Management in Monofacial and Bifacial Modules

Parasitic absorption in photovoltaic modules is a major source of waste heat, which drives operating temperatures 20-30K above ambient. Spectrally-selective sub-bandgap reflection can reduce parasitic absorption, thereby improving module efficiency and power output. Here, we investigate the performance of 1-D spectrally-selective mirrors in monofacial Al BSF and PERC modules, and bifacial PERC modules. In monofacial modules, these mirrors offer >1.2% increase in energy yield compared to single-layer anti-reflection coatings, while cooling by over 1K on average. Mirrors reduced bifacial module parasitic absorption by up to 34 W/m2 out of 1240 W/m2 incident.

41 EE - Solar Energy Technologies Office (EE-4S)↗
NASA NTRS1985

The synthesis and analysis of color images

A method is described for performing the synthesis and analysis of digital color images. The method is based on two principles. First, image data are represented with respect to the separate physical factors, surface reflectance and the spectral power distribution of the ambient light, that give rise to the perceived color of an object. Second, the encoding is made efficient by using a basis expansion for the surface spectral reflectance and spectral power distribution of the ambient light that takes advantage of the high degree of correlation across the visible wavelengths normally found in such functions. Within this framework, the same basic methods can be used to synthesize image data for color display monitors and printed materials, and to analyze image data into estimates of the spectral power distribution and surface spectral reflectances. The method can be applied to a variety of tasks. Examples of applications include the color balancing of color images, and the identification of material surface spectral reflectance when the lighting cannot be completely controlled.

Wandell, B. A.↗
NASA NTRS1987

The synthesis and analysis of color images

A method is described for performing the synthesis and analysis of digital color images. The method is based on two principles. First, image data are represented with respect to the separate physical factors, surface reflectance and the spectral power distribution of the ambient light, that give rise to the perceived color of an object. Second, the encoding is made efficiently by using a basis expansion for the surface spectral reflectance and spectral power distribution of the ambient light that takes advantage of the high degree of correlation across the visible wavelengths normally found in such functions. Within this framework, the same basic methods can be used to synthesize image data for color display monitors and printed materials, and to analyze image data into estimates of the spectral power distribution and surface spectral reflectances. The method can be applied to a variety of tasks. Examples of applications include the color balancing of color images, and the identification of material surface spectral reflectance when the lighting cannot be completely controlled.

Wandell, Brian A.↗
NASA NTRSDate not supplied

Reduction of Spectral Radiance Reflectance During the Annular Solar Eclipse of 21 June 2020 from DSCOVR/EPIC

We have analyzed three EPIC images during the annular solar eclipse on June 21, 2020 when centers of the eclipse were in the Arabian Peninsula (mostly desert), the Himalayas (mostly barren land), and China (mostly cloudy over vegetation) and compared with two images for 2017 American solar eclipse over Casper, WY and Columbia, MO (vegetated surface for both). We found that the global average reductions of spectral reflectance for the three images during 2020 solar eclipse are quite different while the reductions of spectral reflectance for the two images for 2017 solar eclipse are similar. Radiative transfer model simulations suggest that different surface spectral albedo and cloud fraction attribute to the different reduction of spectral reflectance for three images during 2020 eclipse while similar spectral albedo of vegetated surface around Casper and Columbia are the main cause for the similar spectral reflectance reduction for the two images during 2017 solar eclipse.

solar eclipse↗
NASA NTRS1976

Cubic spline reflectance estimates using the Viking lander camera multispectral data

A technique was formulated for constructing spectral reflectance estimates from multispectral data obtained with the Viking lander cameras. The output of each channel was expressed as a linear function of the unknown spectral reflectance producing a set of linear equations which were used to determine the coefficients in a representation of the spectral reflectance estimate as a natural cubic spline. The technique was used to produce spectral reflectance estimates for a variety of actual and hypothetical spectral reflectances.

Park, S. K.↗
NASA NTRS1987

Extraction of spectral hemispherical reflectance (albedo) of surfaces from nadir and directional reflectance data

A radiative transfer model is used to investigate how the error of spectral hemispherical reflectance data obtained from nadir reflectance values varies with wavelength, solar zenith angle, leaf area index, and leaf orientation distribution. Several techniques employing multiple off-nadir view angles taken in azimuth planes are found to accurately infer spectral hemispherical reflectances, and to be well suited to sensor systems that scan in a known azimuth plane or view fore and aft in a known azimuth plane. The effects of errors in hemispherical reflectance on terrestrial energy budget and productivity calculations is also considered.

Kimes, D. S.↗
NASA NTRS1983

The reflection spectrum of liquid sulfur - Implications for Io

The spectral reflectance from 0.38 to 0.75 micron of a column of liquid sulfur has been measured at several temperatures between the melting point (approximately 118 C) and 173 C. Below 160 C the spectral reflectance was observed to vary reversibly as a function of temperature, indepenent of the previous thermal history of the column. Once the temperature exceeded 160 C, the spectrum would not change given a subsequent decrease in temperature. The spectral reflectance of the liquid-sulfur column at all temperatures was very low (10-19 percent). Combining this information with Voyager spectrophotometry of Jupiter's satellite Io, it is concluded that liquid sulfur at any temperature on Io's surface would be classified as a 'black area' according to the standards used by the Voyager imaging team in their spectrophotometric analysis (Soderblom, Johnson, Morrison, Danielson, Smith, Veverka, Cook,Sagan, Kupferman, Pieri, Mosher, Avis, Gradie, and Clancy /1980/.

Nelson, R. M.↗
NASA NTRS1992

COMPAS: Compositional mineralogy with a photoacoustic spectrometer

There is an important need for an in situ method of mineral and rock identification and quantification that provides true absorption spectra for a wide spectral range for lunar lander/rover missions. Many common minerals such as feldspars, magnetite, ilmenite, and amorphous fine solids or glasses, can exhibit flat spectral reflectances in the 400-2500 nm spectral region that render inaccurate or difficult their spectral detection and quantitative analysis. Ideal rock and mineral spectra are, of course, pure absorption spectra that are independent of the spectral effects of scattering, particle size, and distribution that can result in a suppression or distortion of their spectral features. This ideal seldom pertains to real samples. Since sample preparation is difficult and may fundamentally alter the observed diffuse spectral reflectance, an in situ spectral measurement method for rocks and minerals on the Moon, insensitive to the sample morphology, would be invaluable. Photoacoustic spectroscopy is a well-established technique appropriate for this task that has been widely applied in condensed-phase spectral studies of complex, highly light scattering, unprepared samples of everything from coal to whole blood, including rock and mineral characterization. A Compositional Mineralogy Photoacoustic Spectrometer, or COMPAS, can enable in situ spectral measurement of rocks and minerals, bypassing the major limitations of diffuse reflectance spectroscopy. COMPAS spectral capabilities for rock and mineral samples will be incorporated into an instrument prototype specifically for lunar measurements, compatible with rover capabilities.

Smith, W. Hayden↗
NASA NTRS1979

Spectral evidence for sublimates and adsorbates on Io

The results of laboratory studies of sulfur adsorbates and sublimates are presented to explain the observed spectral reflectance of Io. The hemispherical and bidirectional spectral reflectances of typical sublimate phases of Na2S, NaHS, K2S and mixtures thereof with free sulfur were measured under varied temperature and particle-irradiation conditions. It is found that Na2S, K2S and NaHS have absorption bands at all the key wavelengths of Io's spectrum in the UV and visible ranges, and as a group can account for much of Io's spectral reflectance in the 0.25- to 5.0-micron range. It is also concluded that adsorbed gases, possibly H2S and SO2, believed to be formed by reactions in the sublimate phase, also contribute to the IR spectrum of Io's surface.

Nash, D. B.↗
NASA NTRS1975

Reflectance characteristics of the Viking lander camera reference test charts

Reference test charts provide radiometric, colorimetric, and spatial resolution references for the Viking lander cameras on Mars. Reflectance measurements of these references are described, including the absolute bidirectional reflectance of the radiometric references and the relative spectral reflectance of both radiometric and colorimetric references. Results show that the bidirection reflectance of the radiometric references is Lambertian to within + or - 7% for incidence angles between 20 deg and 60 deg, and that their spectral reflectance is constant with wavelength to within + or - 5% over the spectral range of the cameras. Estimated accuracy of the measurements is + or - 0.05 in relative spectral reflectance.

Wall, S. D.↗