Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Lattice crossover and mixed valency in the LaCo{sub 1-x}Rh{sub x}O{sub 3} solid solution

The full LaCo{sub 1-x}Rh{sub x}O{sub 3} solid solution was investigated utilizing structural, electrical transport, magnetic, and thermal conductivity characterization. Strong evidence for at least some conversion of Rh{sup 3+}/Co{sup 3+} to Rh{sup 4+}/Co{sup 2+} is found in both structural and electrical transport data. The crystal structure is that of a rhombohedrally distorted perovskite over the range 0.0{<=}x{<=}0.1. The common orthorhombic distortion of the perovskite structure is found over the range 0.2{<=}x{<=}1.0. A crossover of all three orthorhombic cell edges occurs at x=0.5 giving the appearance of a cubic structure, which actually remains orthorhombic. The octahedra in the orthorhombic structure must be distorted for x values less than 0.5, and the observed distortion suggests orbital ordering for Co{sup 2+}. Electrical resistivity measurements as a function of temperature show semiconducting-like regions for all compositions. There is a steady increase in electrical resistivity as the Rh content increases. Large positive thermopower values are generally obtained above 475 K. With increasing Rh substitution there is a decrease in thermal conductivity, which slowly rises with increasing temperature due to increased electrical conductivity. The electronic part of the thermal conductivity is suppressed significantly upon Rh substitution. A thermoelectric figure-of-merit (ZT) of about 0.075 has been achieved for LaCo{sub 0.5}Rh{sub 0.5}O{sub 3} at 775 K, and is expected to reach 0.15 at 1000 K. - Graphical abstract: A complete solid solution is formed between LaCoO{sub 3} and LaRhO{sub 3}. The effect of Rh substitution for Co on the lattice crossover, mixed valency and physical properties is described.

36 MATERIALS SCIENCE↗

Synthesis and characterization of the LDH hydrotalcite-pyroaurite solid-solution series

A layered double hydroxide (LDH) hydrotalcite-pyroaurite solid-solution series Mg{sub 3}(Al{sub x}Fe{sub 1-x})(CO{sub 3}){sub 0.5}(OH){sub 8} with 1 - x = 0.0, 0.1...1.0 was prepared by co-precipitation at 23 {+-} 2 {sup o}C and pH = 11.40 {+-} 0.03. The compositions of the solids and the reaction solutions were determined using ICP-OES (Mg, Al, Fe, and Na) and TGA techniques (CO{sub 3}{sup 2-}, OH{sup -}, and H{sub 2}O). Powder X-ray diffraction was employed for phase identification and determination of the unit cell parameters a{sub o} and c{sub o} from peak profile analysis. The parameter a{sub o} = b{sub o} was found to be a linear function of the composition. This dependency confirms Vegard's law and indicates the presence of a continuous solid-solution series in the hydrotalcite-pyroaurite system. TGA data show that the temperatures at which interlayer H{sub 2}O molecules and CO{sub 3}{sup 2-} anions are lost, and at which dehydroxylation of the layers occurs, all decrease with increasing mole fraction of iron within the hydroxide layers. Features of the Raman spectra also depend on the iron content. The absence of Raman bands for Fe-rich members (x{sub Fe} > 0.5) is attributed to possible fluorescence phenomena. Based on chemical analysis of both the solids and the reaction solutions after synthesis, preliminary Gibbs free energies of formation have been estimated. Values of {Delta}G{sup o}{sub f}(hydrotalcite) = - 3773.3 {+-} 51.4 kJ/mol and {Delta}G{sup o}{sub f}(pyroaurite) = - 3294.5 {+-} 95.8 kJ/mol were found at 296.15 K. The formal uncertainties of these formations constants are very high. Derivation of more precise values would require carefully designed solubility experiments and improved analytical techniques.

36 MATERIALS SCIENCE↗

Enhanced ferromagnetic order in Sr{sub 4}Mn{sub 3}O{sub 3}(GeO{sub 4}){sub 3} featuring canted [MnO{sub 4}]{sub ∞} spin chains of mixed-valent Mn(III)/Mn(IV). Aliovalent substitution of the Sr{sub 4−x}Ln{sub x}Mn{sup III}{sub 2+x}Mn{sup IV}{sub 1−x}O{sub 3}(GeO{sub 4}){sub 3} solid-solution

Crystals of Sr{sub 4−x}Ln{sub x}Mn{sub 3}O{sub 3}(GeO{sub 4}){sub 3} (x=0; x∼0.15 for Ln=La, Pr, Nd, Sm. Eu, Gd, Dy; x∼0.3 for Ln=Gd) were isolated upon using high-temperature, solid-state methods in molten-salt media. These compounds are isostructural with the previously reported Na{sub 3}LnMn{sub 3}O{sub 3}(AsO{sub 4}){sub 3} (Ln=La, Sm, Gd) series that contains the same [MnO{sub 4}]{sub ∞} spin chains. The synthesis of the Sr{sub 4}Mn{sub 3}O{sub 3}(GeO{sub 4}){sub 3} (x=0) phase was carried out by a double aliovalent substitution with respect to the Sr{sup 2+} and Ge{sup 4+} ions that replace Na{sup +}/Ln{sup 3+} and As{sup 5+} in Na{sub 3}LnMn{sub 3}O{sub 3}(AsO{sub 4}){sub 3}, respectively. The title series contains mixed-valent Mn(III)/Mn(IV) and shows a limited range of solid solution, both of which were not observed in the previously reported Na{sub 3}LnMn{sub 3}O{sub 3}(AsO{sub 4}){sub 3} series. To form the Sr{sub 4−x}Ln{sub x}Mn{sub 3}O{sub 3}(GeO{sub 4}){sub 3} solid solution, one of the Sr{sup 2+} sites, i.e., the original Ln-site in Na{sub 3}LnMn{sub 3}O{sub 3}(AsO{sub 4}){sub 3}, is partially substituted by Ln{sup 3+} in a statistical disorder of Sr{sub 1−x}/Ln{sub x}. Initial magnetic investigations of selected derivatives reveal higher ferromagnetic ordering temperatures than those reported for the Na{sub 3}LnMn{sub 3}O{sub 3}(AsO{sub 4}){sub 3} series, presumably attributed to a lesser degree of canting as a result of introducing non-Jahn–Teller Mn{sup 4+} ions. Also intriguing is the observation of multiple anomalies at low temperatures which appear to be of electronic origins. - Graphical abstract: Sr{sub 4−x}Ln{sub x}Mn(III){sub 2+x}Mn(IV){sub 1−x}O{sub 3}(GeO{sub 4}){sub 3}. Display Omitted - Highlights: • Double aliovalent substitution: Sr{sub 4}Mn{sub 3}O{sub 3}(GeO{sub 4}){sub 3} with respect to Na{sub 3}LnMn{sub 3}O{sub 3}(AsO{sub 4}){sub 3}. • Solid solution with respect to statistical disorder of Sr{sub 1−x}Ln{sub x} in one of the two Sr sites. • Mn{sup 3+}/Mn{sup 4+} magnetic ions are spatially arranged in a triangular kagomé fashion. • Enhanced ferromagnetic ordering attributed to doping non-Jahn–Teller Mn{sup 4+}.

36 MATERIALS SCIENCE↗

The Thermal Expansion of Ag{sub x}Pb{sub 1 –} {sub x}S Limited Semiconductor Solid Solutions

One-phase powders of Ag{sub x}Pb{sub 1 –} {sub x}S cubic solid solutions with a maximum relative silver content to x = 0.12 were synthesized via the chemical codeposition from lead acetate and silver nitrate aqueous solutions in the presence of sulphidizer, as well as complexing and stabilizing agents. The thermal expansion of produced semiconductor solid solutions was first measured via the dilatometry in a temperature range of 295–580 K. As shown, substituting silver atoms for lead in Ag{sub x}Pb{sub 1 –} {sub x}S results in a slight decrease in thermal expansion value, because of alterations in unharmonism of atomic vibrations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Syntheses, and crystal and electronic structures of the new Zintl phases Na{sub 2}ACdSb{sub 2} and K{sub 2}ACdSb{sub 2} (A=Ca, Sr, Ba, Eu, Yb): Structural relationship with Yb{sub 2}CdSb{sub 2} and the solid solutions Sr{sub 2-x}A{sub x}CdSb{sub 2}, Ba{sub 2-x}A{sub x}CdSb{sub 2} and Eu{sub 2-x}Yb{sub x}CdSb{sub 2}

Presented are the details of the syntheses, crystal and electronic structures of a new family of Zintl phases Na{sub 2}ACdSb{sub 2} and K{sub 2}ACdSb{sub 2} (A=Ca, Sr, Ba, Eu, Yb), as well as the solid solutions Sr{sub 2-x}A{sub x}CdSb{sub 2}, Ba{sub 2-x}A{sub x}CdSb{sub 2} and Eu{sub 2-x}Yb{sub x}CdSb{sub 2}. The structures of Na{sub 2}ACdSb{sub 2} and K{sub 2}ACdSb{sub 2} (A=Ca, Sr, Ba, Eu, Yb) were determined to be of a new type with the non-centrosymmetric space group Pmc2{sub 1} (no. 26), Pearson symbol oP12, with lattice parameters a=4.684(1)-4.788(1) A; b=9.099(3)-9.117(2) A; c=7.837(1)-8.057(2) A for the Na{sub 2}ACdSb{sub 2} series, and a=4.6637(9)-5.0368(8) A; b=9.100(2)-9.8183(15) A; and c=7.7954(15)-8.4924(13) A for K{sub 2}ACdSb{sub 2}, respectively. The solid solutions Sr{sub 2-x}A{sub x}CdSb{sub 2}, Ba{sub 2-x}A{sub x}CdSb{sub 2} and Eu{sub 2-x}Yb{sub x}CdSb{sub 2} (x{approx}1) are isostructural and isoelectronic to the recently reported Yb{sub 2}CdSb{sub 2} (space group Cmc2{sub 1} (no. 36), Pearson symbol cP20). All discussed structures are based upon CdSb{sub 2}{sup 4-} polyanionic layers, similar to the ones observed in Yb{sub 2}CdSb{sub 2}, with various alkali- and/or alkaline-earth cations coordinated to them. Magnetic susceptibility and Seebeck coefficient measurements on selected Eu{sub 2-x}Yb{sub x}CdSb{sub 2} samples, taken at low temperatures up to 300 K, are also reported. -- Graphical abstract: The quaternary Zintl phases Na{sub 2}ACdSb{sub 2} and K{sub 2}ACdSb{sub 2} (A=Ca, Sr, Ba, Eu, Yb) with novel layered structures have been synthesized for the first time and structurally characterized by single-crystal X-ray diffraction. Reported as well are the results from crystallographic and property studies of the closely related solid solutions Sr{sub 2-x}A{sub x}CdSb{sub 2}, Ba{sub 2-x}A{sub x}CdSb{sub 2} (x{approx}1), and Eu{sub 2-x}Yb{sub x}CdSb{sub 2} (1<x{<=}2). Display Omitted Research highlights: {yields} Na{sub 2}ACdSb{sub 2} and K{sub 2}ACdSb{sub 2} (A=Ca, Sr, Ba, Eu, Yb) are new quaternary Zintl phases. {yields} Sr{sub 2-x}A{sub x}CdSb{sub 2}, Ba{sub 2-x}A{sub x}CdSb{sub 2} (x{approx}1), and Eu{sub 2-x}Yb{sub x}CdSb{sub 2} (1<x<2) are solid solutions. {yields} Both structures are layered, based on corner-shared CdSb{sub 4} tetrahedra. {yields} Eu{sub 2-x}Yb{sub x}CdSb{sub 2} (1<x<2) exhibit high Seebeck coefficient (217 {mu}V/K at RT).

36 MATERIALS SCIENCE↗

Synthesis, magnetic and dielectric characterization of nanocrystalline solid solutions of In{sub 2−x}Ni{sub x}O{sub 3} (x = 0.05, 0.10 and 0.15)

Graphical abstract: Monophasic and crystalline In{sub 2−x}Ni{sub x}O{sub 3} nanoparticles of size 8–15 nm have been synthesized solvothermally and showed red shift in energy band gap which decreases on increasing Ni{sup 2+} concentration in In{sub 2}O{sub 3} host lattice. - Highlights: • Monophasic Ni-doped In{sub 2}O{sub 3} nanoparticles by solvothermal method for first time. • Plausible reaction mechanism using thermogravimetric analysis. • High surface area with small particle size obtained. • Solid solutions exhibit paramagnetism with very weak antiferromagnetic interactions. - Abstract: In{sub 2−x}Ni{sub x}O{sub 3} (x = 0.05, 0.10 and 0.15) nanoparticles were successfully synthesized by solvothermal method by the thermal decomposition of oxalate precursor at 450 °C for the first time. X-ray diffraction studies showed the formation of highly crystalline and monophasic cubic structure of In{sub 2}O{sub 3} which is attributed to the formation of solid solution. These nanoparticles show good optical transmittance in the visible region. Optical measurements showed an energy band gap which decreases with increasing Ni concentration. The grain size decreases from 15 nm to 8 nm and surface area increases from 90 to 254 m{sup 2} g{sup −1} on increasing the Ni concentration. High dielectric constant and dielectric loss has been obtained which indicates the conducting nature of these solid solutions. Magnetic measurements showed that the samples are strong paramagnetic in nature with very weak antiferromagnetic interactions. No evidence of ferromagnetism is observed for these solid solutions at room temperature.

36 MATERIALS SCIENCE↗

Complex F,Cl Apatite Solid Solution Investigated Using Multinuclear Solid-State NMR Methods

In this paper, a series of synthetic F,Cl apatites with low hydroxyl content was investigated using 31 P, 19 F, and 35 Cl solid-state magic angle spinning (MAS) NMR spectroscopic methods. 31 P single-pulse (SP) NMR spectra show that for each composition the phosphate 31 P chemical shift depends on occupancy of the nearest anion site for each composition. Overall the average chemical shift deviates from linear across the F/Cl series. For intermediate compositions 19 F SP NMR spectra reveal complex, broadened spectral profiles that are not correlated to composition. 19 F{ 35 Cl} TRAPDOR results indicate that the spectral profiles do not reflect occupancy of F and Cl in adjacent column anion sites. We propose that the complex 19 F lineshapes are principally due to broad distributions of 19 F–Ca distances arising from displacement of F along the anion channel. Finally, approximate fluorine atomic positions are estimated based on 19 F chemical shifts of alkaline earth fluoride salts, and the results are in good accord with those proposed for intermediate composition F,Cl apatites from XRD data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical spectrum of Mn 4+ in Y 2 Ti 2-x Sn x O 7 pyrochlore solid solution: R-line energy and intensity

We report we investigated the luminescence of the Mn 4+ ions in Y 2 Ti 2-x Sn x O 7 (x = 0, 0.5, 1.0, 2.0) pyrochlore solid solutions and compared the results with the spectroscopic data of the two end members. The emission spectra in the mixed pyrochlore solid solutions are broadened relative to the end members due to long range disorder between the Sn 4+ and Ti 4+ ions. The R-line intensity is particularly weak in both Y 2 Sn 2 O 7 and Y 2 Ti 2 O 7 . The increase in R-line intensity in the mixed pyrochlore solid solutions is attributed to the random distribution of Sn 4+ and Ti 4+ ions in the second coordination sphere (next nearest neighbors) that removes the inversion symmetry about the Mn 4+ ion. We find a linear relation between the energy position of the R-line and x in Y 2 Ti 2-x Sn x O 7 ( 2 E g (cm –1 ) = 15 010 + 163.0 x; R 2 = 0.98).

36 MATERIALS SCIENCE↗

Growth of ZnSe{sub 1-x}S{sub x} solid solution crystals from vapor phase

Partially faceted ZnSe{sub 1-x}S{sub x} solid solution crystals have been grown from a vapor phase in a closed stationary horizontal system. The growth has been performed in cylindrical quartz ampoules-{approx}10 mm in diameter and evacuated to a residual pressure of less than {approx}10{sup -3} Pa-at a temperature of 1050{sup o}C and a temperature drop between the source and growth zones of 10-16 deg. C. The crystal structure, optical absorption, and composition inhomogeneity along the ingot length have been investigated by X-ray diffractometry and optical spectroscopy in the wavelength range of 300-3000 nm. The solid-solution composition range corresponding to cubic polymorphs is determined. The concentration dependences of the lattice parameter and band gap are presented.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Transport characteristics of phonons and the specific heat of Y{sub 2}O{sub 3}:ZrO{sub 2} solid solution single crystals

The temperature dependences of the specific heat and transport characteristics of phonons in single crystals of yttrium-stabilized zirconium dioxide Y{sub 2}O{sub 3}:ZrO{sub 2} solid solutions have been studied. It has been shown that the temperature dependences of the specific heat at T > 5 K are almost identical at the degree of stabilization of a solid solution with an Y{sub 2}O{sub 3} content of 5–20 mol %. Differences in the temperature dependences of the specific heat of samples from different sources at T < 5 K are due to the presence of low-energy two-level systems. The features of the transport characteristics of thermal phonons at liquid helium temperatures reflect not only the presence of two-level systems but also the scattering of phonons on low-dimensional domains of another phase coherently conjugate to the main phase of the Y{sub 2}O{sub 3}:ZrO{sub 2} solid solution.

36 MATERIALS SCIENCE↗

Exploring the hardness and high-pressure behavior of osmium and ruthenium-doped rhenium diboride solid solutions

Rhenium diboride (ReB 2 ) exhibits high differential strain due to its puckered boron sheets that impede shear deformation. Here, we demonstrate the use of solid solution formation to enhance the Vickers hardness and differential strain of ReB 2 . ReB 2 -structured solid solutions (Re 0.98 Os 0.02 B 2 and Re 0.98 Ru 0.02 B 2 , noted as “ReOsB 2 ” and “ReRuB 2 ”) were synthesized via arc-melting from the pure elements. In-situ high-pressure radial x-ray diffraction was performed in the diamond anvil cell to study the incompressibility and lattice strain of ReOsB 2 and ReRuB 2 up to ~56 GPa. Both solid solutions exhibit higher incompressibility and differential strain than pure ReB 2 . However, while all lattice planes are strengthened by doping osmium (Os) into the ReB 2 structure, only the weakest ReB 2 lattice plane is enhanced with ruthenium (Ru). These results are in agreement with the Vickers hardness measurements of the two systems, where higher hardness was observed in ReOsB 2 . The combination of high-pressure studies with experimentally observed hardness data provides lattice specific information about the strengthening mechanisms behind the intrinsic hardness enhancement of the ReB 2 system.

36 MATERIALS SCIENCE↗

Magnetic Phase Diagram of CuCr{sub 2–x}Sb{sub x}S{sub 4} Solid Solutions

The magnetization of CuCr{sub 2–x}Sb{sub x}S{sub 4} solid solutions has been measured as a function of temperature between 300 and 5 K in a weak (3980 A/m) and a strong (7960 A/m) magnetic field. We have identified the type and character of the magnetic transformations observed in the system and determined the temperature and composition limits of the stability regions of the magnetically active phases involved and the cation and valence distributions in them. A magnetic phase diagram of the synthesized materials has been mapped out, where the largest area (0 < x < 0.23) after the paramagnetic region is occupied by solid solutions based on the CuCr{sub 2}S{sub 4} ferromagnet. In the composition range (0.23 < x < 0.40) adjacent to the infinite clusters—CuCr{sub 2}S{sub 4} ferromagnet and CuCr{sub 1.5}Sb{sub 0.5}S{sub 4} antiferromagnet—the phase diagram contains medium and small finite ferro- and antiferromagnetic clusters forming a short-range magnetic order or spin glass. The compositions based on the CuCr{sub 1.5}Sb{sub 0.5}S{sub 4} antiferromagnet lie in the composition range 0.4 < x < 0.5.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Metal-nonmetal transition in the sphalerite-type solid solution [ZnSnSb{sub 2}]{sub 1-x}[2(InSb)]{sub x}

Samples of the solid solution [ZnSnSb{sub 2}]{sub 1-x}[2(InSb)]{sub x} have been prepared over the whole range of composition by tin flux synthesis. The lattice parameter of the sphalerite-type average structure varies linearly between that of the end members ZnSnSb{sub 2} and InSb, a=6.2849(2) and 6.4776(15), respectively. Electron diffraction shows different kinds of structured diffuse scattering for Zn and In rich samples, respectively. The former is attributed to compositional short range ordering, the latter to thermally excited phonon modes. A metal-nonmetal transition takes place between the compositions x=0.8 and x=0.9. - Graphical abstract: Alloys of the sphalerite-type solid solution [ZnSnSb{sub 2}]{sub 1-x}[2(InSb)]{sub x} can be prepared over the whole range of composition by Sn flux synthesis. A metal-nonmetal transition takes place between the compositions x=0.8 and x=0.9.

36 MATERIALS SCIENCE↗

Structural Properties of Cd{sub x}Hg{sub 1–x}Te Solid-Solution Nanoparticles

It is shown that Cd{sub x}Hg{sub 1–x}Te solid-solution nanoparticles can be produced by ball milling, but their presence is masked by larger particles. The methods of laser-correlation spectroscopy and X-ray-diffraction analysis have been used to study the structure of the nanoparticles and their size distribution. The presence of a compositional disordering of the solid solution structure was experimentally confirmed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

SOLID SOLUTION EFFECTS ON THE THERMAL PROPERTIES IN THE MgAl2O4-MgGa2O4

Solid solution eects on thermal conductivity within the MgO-Al2O3-Ga2O3 system were studied. Samples with systematically varied additions of MgGa2O4 to MgAl2O4 were prepared and the laser ash technique was used to determine thermal diusivity at temperatures between 200C and 1300C. Heat capacity as a function of temperature from room temperature to 800C was also determined using dierential scanning calorimetry. Solid solution in the MgAl2O4-MgGa2O4 system decreases the thermal conductivity up to 1000C. At 200C thermal conductivity decreased 24% with a 5 mol% addition of MgGa2O4 to the system. At 1000C the thermal conductivity decreased 13% with a 5 mol% addition. Steady state calculations showed a 12.5% decrease in heat ux with 5 mol% MgGa2O4 considered across a 12 inch thickness.

Spinel↗

Synthesis, X-ray Diffraction Characterization, Mössbauer Spectroscopy, and Dielectric Properties of Solid Solutions in the PbFe{sub 2/3}W{sub 1/3}O{sub 3}–PbSc{sub 2/3}W{sub 1/3}O{sub 3} System

Ceramic Pb(Fe{sub 1–x}Sc{sub x}){sub 2/3}W{sub 1/3}O{sub 3} samples with 0 ≤ x ≤ 1 have been prepared and characterized by X-ray diffraction, Mössbauer spectroscopy, and dielectric and pyroelectric measurements. The stoichiometry ranges of the perovskite solid solutions in this system have been identified, their structural parameters have been determined, and their dielectric permittivity, dielectric loss tangent, resistivity, and thermally stimulated depolarization current have been measured as functions of temperature. The composition dependences of the dielectric properties for the solid solutions have been obtained. The solid solutions have been shown to exhibit ferroelectric relaxor properties, with a well-defined maximum in their permittivity in the range 180–250 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase stability, physical properties and strengthening mechanisms of concentrated solid solution alloys

Here, we review recent research developments in a special class of multicomponent concentrated solid solution alloys (CSAs) – of which the recently discovered high entropy alloys (HEAs) are exemplars – that offer a new paradigm for the development of next generation structural materials. This review focuses on the role of inherent extreme chemical complexity on the phase stability, electronic, transport, and mechanical properties of this remarkable class of disordered solid solution alloys. Both experimental observations and theoretical models indicate that the phase stability of HEAs goes beyond the original conjecture that these alloys are stabilized by configurational/mixing entropy; rather, it results from competition between the homogeneously disordered phase and phase separation/intermetallic compound formation. Although the number of single-phase HEAs with equiatomic composition is limited, those that do exist often exhibit remarkable electronic, magnetic, transport, and mechanical properties. For the mechanical response, we discuss the solution strengthening mechanism which governs the strength and deformation behaviors of the CSAs, as well as the increasing evidence that low stacking fault energies (deformation twinning) plays an important role in the low temperature strength and ductility of CrMnFeCoNi related alloys. We also review the current understanding of the role of the number and type of alloy elements in determining the electronic, magnetic, and transport properties, in particular the dominant role of magnetic interactions in the properties of 3d-transition metal based alloys. Finally, we emphasize that, despite rapid progress in characterization and understanding of the phase stability and physical/mechanical responses of CSAs, there remain significant challenges to fully exploring the new paradigm that these alloys represent.

36 MATERIALS SCIENCE↗

Additive Molar Volumes in Amorphous Ca/Sr Carbonate Solid Solutions

The development of predictive models of minor element incorporation in crystalline carbonate end products requires an understanding of the fundamental controls on metastable intermediate phase composition. In this study, we used small-angle X-ray scattering (SAXS), X-ray pair distribution function (PDF), thermogravimetric analysis (TGA), inductively coupled plasma mass spectrometry (ICP-MS), and transmission electron microscopy (TEM) to determine the composition-dependent density of an amorphous calcium–strontium carbonate (ACSC) solid solution. The amorphous calcium carbonate (ACC) and strontium carbonate (ASC) measured densities were ρ ACC = 2.19 ± 0.04 g/cm 3 and ρ ASC = 2.97 ± 0.05 g/cm 3 . Throughout our work, the experiments showed a dependence of the water content of the amorphous solid solution on the Sr mole fraction. An equation that relates the molar volume to the average cation radius, the carbonate ion radius, and the water volume was parameterized for hydrated crystalline carbonates and predicted well the molar volume of the ACSC solid solution. This finding indicates that, as for hydrated crystalline carbonates, the molar volumes of amorphous carbonates are additive and that water is a structural component of ACSC. Ab initio molecular dynamics (AIMD) simulations of the ACSC solid solutions showed strong linear correlations between calculated molar volumes and Sr and H 2 O contents, thus supporting the experimental results. In conclusion, our findings highlight the need to consider the full CaCO 3 –MeCO 3 –H 2 O ternary when quantifying metal cation incorporation in ACC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗