Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solar interior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

First results from the Solar Orbiter Heavy Ion Sensor

Aims . Solar Orbiter launched in February 2020 with the goal of revealing the connections between the Sun’s interior, atmosphere, and the heliosphere. The Solar Orbiter Heavy Ion Sensor (HIS) is a time-of-flight ion mass spectrometer dedicated to measuring heavy ions in the solar wind. Methods . We present an overview of the first measurements of heavy ion composition from HIS, reviewing the methods used to transform the spectra obtained on board into scientific data products and examining two solar wind case studies as well as the statistical properties of the heavy ion composition observed by HIS. We also carried out a comparison with prior measurements of heavy ions at L1. Results . The HIS data set provides the first mass- and charge-resolved heavy ion measurements in the inner heliosphere. Conclusions . These high temporal resolution data have the potential to transform our understanding of the connections between the solar wind and its origin at the Sun, as well as the interaction between the solar wind and the environment around planets, comets, and in the interstellar medium.

solar wind↗

Incorporation of Solar Noble Gases from a Nebula-Derived Atmosphere During Magma Ocean Cooling

The presence of solar noble gases in the deep interior of the Earth is inferred from the Ne isotopic compositions of MORB (Mid-ocean Ridge Basalts) and OIB (Oceanic Island Basalt); Ar data may also consistent with a solar component in the deep mantle. Models of the transport and distribution of noble gases in the earth's mantle allow for the presence of solar Ar/Ne and Xe/Ne ratios and permit the calculation of lower mantle noble gas concentrations. These mantle data and models also indicate that the Earth suffered early (0.7 to 2 x 10(exp 8) yr) and large (greater than 99 percent) losses of noble gases from the interior, a result previously concluded for atmospheric Xe. We have pursued the suggestion that solar noble gases were incorporated in the forming Earth from a massive, nebula-derived atmosphere which promoted large-scale melting, so that gases from this atmosphere dissolved in the magma ocean and were mixed downward. Models of a primitive atmosphere captured from the solar nebula and supported by accretion luminosity indicate that pressures at the Earth's surface were adequate (and largely more than the required 100 Atm) to dissolve sufficient gases. We have calculated the coupled evolution of the magma ocean and the overlying atmosphere under conditions corresponding to the cessation (or severe attenuation) of the sustaining accretion luminosity, prior to the complete removal of the solar nebula. Such a condition was likely to obtain, for instance, when most of the unaccumulated mass resided in large bodies which were only sporadically accreted. The luminosity supporting the atmosphere is then that provided by the cooling Earth, consideration of which sets a lower limit to the time required to solidify the mantle and terminate the incorporation of atmospheric gases within it. In our initial calculations, we have fixed the nebula temperature at To = 300K, a value likely to be appropriate for nebular temperatures at lAU in the early planet-building epoch. We treated the background (nebula) pressure as an adjustable, time-dependent parameter. Additional information is contained within the original extended abstract.

Woolum, D. S.↗

Tidal Insights into Rocky and Icy Bodies: An Introduction and Overview

Solid body tides provide key information on the interior structure, evolution, and origin of the planetary bodies. Our Solar system harbours a very diverse population of planetary bodies, including those composed of rock, ice, gas, or a mixture of all. While a rich arsenal of geophysical methods has been developed over several years to infer knowledge about the interior of the Earth, the inventory of tools to investigate the interiors of other Solar-system bodies remains limited. With seismic data only available for the Earth, the Moon, and Mars, geodetic measurements, including the observation of the tidal response, have become especially valuable and therefore, has played an important role in understanding the interior and history of several Solar system bodies. To use tidal response measurements as a means to obtain constraints on the interior structure of planetary bodies, appropriate understanding of the viscoelastic reaction of the materials from which the planets are formed is needed. Here, we review the fundamental aspects of the tidal modeling and the information on the present-day interior properties and evolution of several planets and moons based on studying their tidal response. We begin with an outline of the theory of viscoelasticity and tidal response. Next, we proceed by discussing the information on the tidal response and the inferred structure of Mercury, Venus, Mars and its moons, the Moon, and the largest satellites of giant planets, obtained from the analysis of the data that has been provided by space missions. We also summarise the upcoming possibilities offered by the currently planned missions.

Tides↗

Rotation in solar-type stars. I - Evolutionary models for the spin-down of the sun

Models of rotating, 1 solar mass stars through the pre-main sequence and main sequence stages have been calculated. The calculations begin on the Hayashi track with rapid, rigid-body rotation, with angular momentum removed from the convective envelope to simulate the effect of the solar wind as the models evolve. Interior angular momentum redistribution by circulation flows and rotational instabilities is computed by a diffusion technique. It is found that at the present age of solar evolution, the models employed have internal rotation rates significantly larger than those allowed by measured solar oblateness, suggesting that the effects of circulation currents near the outer boundary of the radiative interior have been underestimated. An important result of this study is the implication that circulation currents produce deep mixing of such minor constituents as He-3 and C-13, perhaps also explaining the observed steady depletion of lithium during the main-sequence stage.

Endal, A. S.↗

Solar energetic particle events and coronal mass ejections: New insights from SOHO

The scientific payload of SOHO, launched in December 1995, enables comprehensive studies of the sun from its interior, to the outer corona and solar wind. In its halo orbit around the Lagrangian point of the sun-earth system, the comprehensive suprathermal and energetic particle analyzer (COSTEP) measures in situ energetic partiles in the energy range 44 keV/particle to greater than 53 MeV/n. Although solar activity was at minimum, COSTEP detected from mid December 1995 until the end of July 1997, 30 solar energetic particle (SEP) events, including both gradual and implusive type SEPs. These minimum phase SEP events are unique in the sense that their associated solar source phenomena can be investigated in detail without interference by other simultaneous solar events as is usually the case at times around solar activity maximum. Simultaneous observations of the solar corona are provided by the large angle spectroscopic coronagraph (LASCO) and the extreme ultraviolet imaging telescope (EIT). From the correlated SOHO observations, a one to one correspondence of SEP events with coronal mass ejections (CMEs) was found. Most of the SEP events were associated with west-limb CMEs, some with halo CMEs that later passed the SOHO spacecraft and with Moreton-like disturbances in the lower solar atmosphere as observed by the EIT. Many SEP events were detected at sector boundaries of the interplanetary magnetic field (IMF) suggesting a magnetic connection to coronal streamers at the sun as supported by LASCO observations of mass ejections at the base of helmet streamers. Energetic particle and LASCO white-light observations yield evidence that CMEs often lead to large-scale disturbances of the sun's corona, probably affecting at times areas all around the sun.

Bothmer, V.↗

Modeling of Multiscale Solar Dynamics for Understanding Drivers of Space Weather

Understanding the solar dynamics is critical for improving our capabilities to forecast the evolution of space weather conditions. We take advantage of currently available computational capabilities to model solar dynamics from the deep interior to the corona and investigate mechanisms that may drive space weather conditions. The simulations are performed using the 3D radiative MHD code StellarBox. Comparison of synthetic spectroscopic observables obtained from numerical simulations and actual observations allows us to uncover physical processes associated with observed phenomena. To facilitate a transition from modeling short-term physical phenomena to developing a reliable forecast-oriented model, we suggest using the data assimilation approach. It allows us to cross-analyze dynamo model solutions and observations and to consider possible uncertainties and errors. In this presentation, we briefly summarize current multi-scale modeling capabilities and results and discuss ongoing developments to build a reliable physics-based forecast-oriented model of solar activity.

Irina N Kitiashvili↗

Modeling of Multiscale Solar Dynamics for Understanding Drivers of Space Weather

Understanding the solar dynamics is critical for improving our capabilities to forecast the evolution of space weather conditions. We take advantage of currently available computational capabilities to model solar dynamics from the deep interior to the corona and investigate mechanisms that may drive space weather conditions. The simulations are performed using the 3D radiative MHD code StellarBox. Comparison of synthetic spectroscopic observables obtained from numerical simulations and actual observations allows us to uncover physical processes associated with observed phenomena. To facilitate a transition from modeling short-term physical phenomena to developing a reliable forecast-oriented model, we suggest using the data assimilation approach. It allows us to cross-analyze dynamo model solutions and observations and to consider possible uncertainties and errors. In this presentation, we briefly summarize current multi-scale modeling capabilities and results and discuss ongoing developments to build a reliable physics-based forecast-oriented model of solar activity

Irina N Kitiashvili↗

Modeling of Multiscale Solar Dynamics for Understanding Drivers of Space Weather

Understanding the solar dynamics is critical for improving our capabilities to forecast the evolution of space weather conditions. We take advantage of currently available computational capabilities to model solar dynamics from the deep interior to the corona and investigate mechanisms that may drive space weather conditions. The simulations are performed using the 3D radiative MHD code StellarBox. Comparison of synthetic spectroscopic observables obtained from numerical simulations and actual observations allows us to uncover physical processes associated with observed phenomena. To facilitate a transition from modeling short-term physical phenomena to developing a reliable forecast-oriented model, we suggest using the data assimilation approach. It allows us to cross-analyze dynamo model solutions and observations and to consider possible uncertainties and errors. In this presentation, we briefly summarize current multi-scale modeling capabilities and results and discuss ongoing developments to build a reliable physics-based forecast-oriented model of solar activity

Irina N. Kitiashvili↗

Acquisition and Early Losses of Rare Gases from the Deep Earth

Direct observations show that the deep Earth contains rare gases of solar composition distinct from those in the atmosphere. We examine the implications of mantle rare gas characteristics on acquisition of rare gases from the solar nebula and subsequent losses due to a large impact. Deep mantle rare gas concentrations and isotopic compositions can be obtained from a model of transport and distribution of mantle rare gases. This model assumes the lower mantle closed early, while the upper mantle is open to subduction from the atmosphere and mass transfer from the lower mantle. Constraints are derived that can be incorporated into models for terrestrial volatile acquisition: (1) Calculated lower-mantle Xe-isotopic ratios indicate that the fraction of radiogenic Xe produced by I-129 and Pu-244 during the first about 10(exp 8) yr was lost, a conclusion also drawn for atmospheric Xe. Thus, either the Earth was made from materials that had lost >99% of rare gases about (0.7-2) x 10(exp 8) yr after the solar system formed, or gases were then lost from the fully formed Earth. (2) Concentrations of 3He and 20Ne in the lower mantle were established after these losses. (3) Neon-isotopic data indicates that mantle Ne has solar composition. The model allows for solar Ar/Ne and Xe/Ne in the lower mantle if a dominant fraction of upper mantle Ar and Xe are subduction-derived. If Earth formed in the presence of the solar nebula, it could have been melted by accretional energy and the blanketing effect of a massive, nebula-derived atmosphere. Gases from this atmosphere would have been sequestered within the molten Earth by dissolution at the surface and downward mixing. It was found that too much Ne would be dissolved in the Earth unless the atmosphere began to escape when the Earth was only partially assembled. Here we consider conditions required to initially dissolve sufficient rare gases to account for the present lower mantle concentrations after subsequent losses at 10(exp 8) yr. It is assumed that equilibration of the atmosphere with a thoroughly molten mantle was rapid, so that initial abundances of gases retained in any mantle layer reflected surface conditions when the layer solidified. For subsequent gas loss of 99.5% and typical solubility coefficients, a total pressure of 100 atm was required for an atmosphere of solar composition. Calculations of the pressure at the base of a primordial atmosphere indicate that this value might be exceeded by an order of magnitude or more for an atmosphere supported by accretional energy. Surface temperatures of about 4000 K would have been produced, probably high enough to melt the deep mantle. Initial distributions of retained rare gases would then be determined by the history of surface pressure and temperature during mantle cooling and solidification, i.e., the coupled cooling of Earth and atmosphere. The Earth's thermal state was determined by its surface temperature and the efficiency of convection in the molten mantle, estimated to be sufficient to maintain an adiabatic gradient. Because the melting curve is steeper than the adiabat, solidification of the mantle proceeded outward from the interior. Incorporation of atmospheric gases in the mantle therefore occurred over a range in surface temperature of a few thousand degrees Kelvin. The thermal state of the atmosphere was controlled by total luminosity of the Earth (energy) released by accreting planetesimals and the cooling Earth), nebular temperature and pressure, and atmospheric opacity. The energy released by accretion declined with time as did nebular pressure. Analytical solutions for an idealized (constant opacity radiative atmosphere show that declining energy sources under constant nebular conditions result in slowly diminishing surface temperature but dramatically increasing surface pressure. For such an atmosphere with declining nebular pressure but constant total luminosity, surface pressure decreases gradually with decreasing temperaure. A decline in accretion luminosity might be compensated by energy released as the mantle cools for about 10(exp 5) year, after which luminosity must decline. The total complement of dissolved rare gases will depend on the particular evolutionary path determined by the declining accretional luminosity, the Earth thermal history, removal of the nebula, and opacity variations of the atmosphere. Models for these coupled evolutionary histories for Earth's acquisition of nebular-derived noble gases are in progress. The later losses required at about 10(exp 8) yr (depleting the interior concentrations of the sequestered solar gases by a factor of > 100) were presumably related to the major impact in which the Moon formed.

Porcelli, D.↗

Large Impact Features on Icy Galilean Satellites

Impact crater morphology can be a very useful tool for probing planetary interiors, but nowhere in the solar system is a greater variety of crater morphologies observed (Fig. 1) than on the large icy Galilean satellites Ganymede and Callisto [e.g., 1- 3]. As on the rocky terrestrial planets, impact crater morphology becomes more complex with increasing size on these satellites. With increasing size, however, these same craters become less like their counterparts on the rocky planets. Several impact landforms and structures (multiring furrows, palimpsests, and central domes, for example), have no obvious analogs on any other planets. Further, several studies [e.g., 4-6] have drawn attention to impact landforms on Europa which are unusual, even by Galilean satellite standards. These radical differences in morphology suggest that impact into icy lithospheres that are mechanically distinct from silicate lithospheres may be responsible. As such, large impact structures may be important probes of the interiors of these bodies over time [e.g., 7]. The first goal of this work is to integrate and correlate the detailed morphologic and morphometric measurements and observations of craters on icy Galilean satellites [e.g., 4, 8-12] with new detailed mapping of these structures from Galileo high-resolution images. As a result, we put forward a revised crater taxonomy for Ganymede and Callisto in order to simplify the nonuniform impact crater nomenclature cluttering the literature. We develop and present an integrated model for the development of these unusual crater morphologies and their implications for the thermal evolution of these bodies.

crater morphologies↗

Solar Simulation

Simulation of the surface region and interior of the Sun's convection zone. The objective is to provide understanding of the tachocline at the base of the convection zone. of the differential rotation generated by global convective motions, and of supergranules that are observed on the solar surface. Two large-scale simulation codes are used, one for the global dynamics in spherical coordinates and another for the local surface events in Cartesian geometry. We work in close collaboration with the Helioseismic and Magnetic Imager instrument developers for the Solar Dynamics Observatory satellite. NASA Program: Living with a Star - Sun-Earth Connection.

Wray, Alan↗

Quantifying the Solar Energy Resource for Puerto Rico

After Hurricane Maria, multiple U.S. Department of Energy laboratories studied the state of the electric grid in Puerto Rico and analyzed grid resilience and grid integration of renewable energy. As part of the work done at the National Renewable Energy Laboratory, researchers created new solar resource data, conducted a technical potential and supply curve analysis, and studied the interannual variability of the solar resource. A new methodology was developed to downscale solar resource data from the National Solar Radiation Data Base (NSRDB) from a 4-km x 4-km spatial and 30-minute temporal resolution to a 2 km x 2 km and 5-minute resolution. This methodology primarily used simple physical principles to develop high-resolution cloud properties which were then used to compute solar radiation. The high-resolution datasets were validated against ground measurements and the error metrics were found to be similar to the original lower resolution dataset. Using 20 years of downscaled data from the NSRDB multi-year capacity factors for photovoltaics (PV) were developed for both single-axis tracking and fixed latitude-tilt configurations. Use of the multi-year data provides the ability to understand variability in capacity factors due to variability in weather over a long period of time. For Puerto Rico the coastal regions were found to have significant higher capacity factors than inland. Using land-use and terrain information a technical potential analysis was conducted for Puerto Rico. This analysis restricted single PV plant development to a maximum of 100 MW nameplate capacity. The nameplate capacity for each municipality were then determined. Based on our assumptions, 56 of the 78 total municipalities of Puerto Rico contain some level of solar capacity. Most of the interior municipalities did not have any capacity because of the geographic exclusions used in this study. The lowest capacity for a PV plant observed in a municipality was 10 MW. The maximum capacity within a county was 2,000 MW. Further a supply curve analysis was conducted by taking the results of the technical potential and quantifying system and transmission costs. The levelized cost of energy (LCOE) was calculated for each theoretical PV plant site, and the levelized cost of transmission was added to the LCOE to produce a total cost estimate for each site. The results of the supply curve analysis allow for a relative comparison of the cost for integrating new PV capacity into the grid. This analysis indicates that cheaper total LCOE sites tend to be larger in capacity. The total capacity in this study was found to be far beyond the maximum peak load for the island. However, this study does not consider the economic and market potential for development. The cumulative capacity presented in this study assumes that the best locations are developed first and ignores the complex decision paths for new power plant development. Therefore, this analysis can only be treated as illustrative. Finally this study investigates the impact of inter-annual variability of resource using a variety of metrices including probability of exceedance and variation in capacity factor and LCOE. This study demonstrates that the capacity factor or LCOE could vary by over 10% year to year. This clearly indicates the risks involved in using any particular year of data and clearly points to the use of multi-year data to reduce some of the risks related to variability in weather.

14 SOLAR ENERGY↗

Computational and Experimental Validation of Fractal-Fin, Dimpled Solar Heat Collector

A 3 foot x 3 foot x 3 foot aluminum solar collector was manufactured using computer numerical control. The interior of the device included six triangular dimpled fins for enhanced heat transfer. The interior vertical wall on the south side was also dimpled. The solar collector working fluid was based on water, and the collector consisted solely of passive heat transfer mechanisms (no moving parts), making it ideal for off-the-grid and rural applications. Two types of heat transfer experiments were conducted. One experiment had external flat heaters attached on the top and the front side, while the other four sides were insulated. Except for the bottom surface, the second experiment had all its exterior surfaces sprayed with black solar paint to collect as much solar heat as possible. Temperature data as a function of time was collected using 14 thermocouples spread strategically throughout the solar collector. In addition, computational fluid dynamics (CFD) simulations were conducted using the dynamic Smagorinsky large eddy simulation turbulence model. The first simulation considered that both the top and front surfaces were exposed to a fixed temperature of 313.7 K (105 °F), while the remaining four surfaces were insulated. For the second simulation, all conditions were the same, except that the temperature for both heated surfaces was raised to 350 K (170.3 °F). The two temperatures are expected to bound the solar collector operational temperature during the late- Spring, Summer, and early-Fall months. The solar collector design, experimental data, CFD output, and a discussion of five manufacturing approaches and costs are documented in this report.

14 SOLAR ENERGY↗

Induced and permanent magnetism on the moon - Structural and evolutionary implications.

It is shown that the moon possesses an extraordinary response to induction from the solar wind due to a combination of a high interior electrical conductivity together with a relatively resistive crustal layer into which the solar wind dynamic pressure forces back the induced field. The dark side response, devoid of solar wind pressure, is approximately that expected for the vacuum case. These data permit an assessment of the interior conductivity and an estimate of the thermal gradient in the crustal region. The discovery of a large permanent magnetic field at the Apollo 12 site corresponds approximately to the paleomagnetic residues discovered in both Apollo 11 and 12 rock samples. The implications regarding an early lunar magnetic field are discussed and it is shown that among the various conjectures regarding the early field the most prominent are either an interior dynamo or an early approach to the earth though no extant model is free of difficulties.

Sonett, C. P.↗

Electrical conductivity of the lunar interior - Theory, error sources, and estimates

Estimates of the electrical conductivity of the lunar interior were previously obtained by comparison of magnetometer data at the lunar surface and in near lunar space. In studies based on solar wind observations, IR was assumed that fields induced in the lunar interior by time-varying external fields are confined by the solar wind within the lunar interior on the dayside and within a cylindrical plasma cavity on the nightside. In the present paper, the induced fields are calculated for a more realistic conical plasma cavity geometry.

Goldstein, B. E.↗

Catalytic solar reactor

A catalytic solar reactor useful in chemical processes, more particularly, useful in endothermic chemical processes. The reactor comprises a reaction pathway defined by an exterior wall and an interior wall, the exterior wall comprising a solar radiation receiver capable of converting solar radiation into heat and transmitting the heat to the reaction pathway. Further, the reaction pathway has disposed therein, in alternating fashion, a plurality of catalytic elements and a plurality of heat transfer elements. Optionally, a supplementary heater, such as a conventional fossil fuel burner, is disposed in a plenum located within the interior of the reactor. The heater is employed as a supplemental source of heat, for example, when solar radiation is unavailable.

Weissman, Jeffrey G.↗

Planetary structure.

Probable interior structure of planets in solar system and Moon, based on data relative to terrestrial theory

SOLAR SYSTEM↗